Displaying all 8 publications

Abstract:
Sort:
  1. Othman N, Ismail Z, Selamat MI, Sheikh Abdul Kadir SH, Shibraumalisi NA
    Int J Environ Res Public Health, 2022 Oct 26;19(21).
    PMID: 36360801 DOI: 10.3390/ijerph192113923
    Polychlorinated biphenyls (PCBs) were widely used in industrial and commercial applications, until they were banned in the late 1970s as a result of their significant environmental pollution. PCBs in the environment gained scientific interest because of their persistence and the potential threats they pose to humans. Traditionally, human exposure to PCBs was linked to dietary ingestion. Inhalational exposure to these contaminants is often overlooked. This review discusses the occurrence and distribution of PCBs in environmental matrices and their associated health impacts. Severe PCB contamination levels have been reported in e-waste recycling areas. The occurrence of high PCB levels, notably in urban and industrial areas, might result from extensive PCB use and intensive human activity. Furthermore, PCB contamination in the indoor environment is ten-fold higher than outdoors, which may present expose risk for humans through the inhalation of contaminated air or through the ingestion of dust. In such settings, the inhalation route may contribute significantly to PCB exposure. The data on human health effects due to PCB inhalation are scarce. More epidemiological studies should be performed to investigate the inhalation dose and response mechanism and to evaluate the health risks. Further studies should also evaluate the health impact of prolonged low-concentration PCB exposure.
    Matched MeSH terms: Inhalation Exposure/analysis
  2. Ting CY, Ahmad Sabri NA, Tiong LL, Zailani H, Wong LP, Agha Mohammadi N, et al.
    PMID: 31530230 DOI: 10.1080/10934529.2019.1665950
    While past studies have detected heavy metals in aerosols emitted from electronic cigarettes (ECIG), they have provided little information detailing the practical implications of the findings to the Malaysian population due to variations between products. The aims of this study were to analyse heavy metals of interest (HMOI) in the aerosols emitted from selected ECIG and to evaluate potential health risks by referring to the permissible daily exposure (PDE) from inhalational medications defined by the United States Pharmacopeia Chapter 232. All four HMOI were detected in aerosols emitted from the selected ECIG in Sarawak. Among the four, Cr was present at the highest median levels (6.86 ng/m3), followed by Ni (0.30 ng/m3), Pb (0.19 ng/m3) and Cd (0.01 ng/m3). Five out of 100 combinations (5%) of ECIG and ECIG liquids were found to emit Cr that exceed the recommended PDE. Future studies examining more heavy metal variants, using a larger sample size and different analytical techniques to compare various ECIGs are recommended.
    Matched MeSH terms: Inhalation Exposure/analysis*
  3. Abdul Shakor AS, Pahrol MA, Mazeli MI
    J Environ Public Health, 2020;2020:1561823.
    PMID: 32351580 DOI: 10.1155/2020/1561823
    Particulate matter with an aerodynamic diameter of 10 μm or less (PM10) pollution poses a considerable threat to human health, and the first step in quantifying health impacts of human exposure to PM10 pollution is exposure assessment. Population-weighted exposure level (PWEL) estimation is one of the methods that provide a more refined exposure assessment as it includes the spatiotemporal distribution of the population into the pollution concentration estimation. This study assessed the population weighting effects on the estimated PM10 concentrations in Malaysia for years 2000, 2008, and 2013. Estimated PM10 annual mean concentrations with a spatial resolution of 5 kilometres retrieved from satellite data and population count obtained from the Gridded Population of the World version 4 (GPWv4) from the Centre for International Earth Science Information Network (CIESIN) were overlaid to generate the PWEL of PM10 for each state. The calculated PWEL of PM10 concentrations were then classified based on the World Health Organization (WHO) and the national Air Quality Guidelines (AQG) and interim targets (IT) for comparison. Results revealed that the annual mean PM10 concentrations in Malaysia ranged from 31 to 73 µg/m3 but became generally lower, ranging from 20 to 72 µg/m3 after population weighting, suggesting that the PM10 population exposure in Malaysia might have been overestimated. PWEL of PM10 distribution showed that the majority of the population lived in areas that complied with the national AQG, but were vulnerable to exposure level 3 according to the WHO AQG and IT, indicating that the population was nevertheless potentially exposed to significant health effects from long-term exposure to PM10 pollution.
    Matched MeSH terms: Inhalation Exposure/analysis*
  4. Abidin EZ, Hashim Z, Semple S
    Asian Pac J Cancer Prev, 2013;14(11):6845-50.
    PMID: 24377615
    BACKGROUND: This study was performed to gather data on second-hand smoke (SHS) concentrations in a range of public venues following the implementation of partial Smoke-Free Legislation in Malaysia in 2004.

    MATERIALS AND METHODS: PM2.5 was measured as a marker of SHS levels in a total of 61 restaurants, entertainment centres, internet cafes and pubs in Kuala Lumpur, Malaysia.

    RESULTS: Under the current smoke-free laws smoking was prohibited in 42 of the 61 premises. Active smoking was observed in nearly one-third (n=12) of these. For premises where smoking was prohibited and no active smoking observed, the mean (standard deviation) indoor PM2.5 concentration was 33.4 (23.8) μg/m3 compared to 187.1 (135.1) μg/m3 in premises where smoking was observed The highest mean PM2.5 was observed in pubs [361.5 (199.3) μg/m3].

    CONCLUSIONS: This study provides evidence of high levels of SHS across a range of hospitality venues, including about one-third of those where smoking is prohibited, despite 8 years of smoke-free legislation. Compliance with the legislation appeared to be particularly poor in entertainment centres and internet cafes. Workers and non-smoking patrons continue to be exposed to high concentrations of SHS within the hospitality industry in Malaysia and there is an urgent need for increased enforcement of existing legislation and consideration of more comprehensive laws to protect health.

    Matched MeSH terms: Inhalation Exposure/analysis*
  5. Baharuddin MR, Sahid IB, Noor MA, Sulaiman N, Othman F
    J Environ Sci Health B, 2011;46(7):600-7.
    PMID: 21749249 DOI: 10.1080/03601234.2011.589309
    A cross-section analytical study was conducted to evaluate the risk of pesticide exposure to those applying the Class II pesticides 2,4-D and paraquat in the paddy-growing areas of Kerian, Perak, Malaysia. It investigated the influence of weather on exposure as well as documented health problems commonly related to pesticide exposure. Potential inhalation and dermal exposure for 140 paddy farmers (handlers of pesticides) were assessed. Results showed that while temperature and humidity affected exposure, windspeed had the strongest impact on pesticide exposure via inhalation. However, the degree of exposure to both herbicides via inhalation was below the permissible exposure limits set by United States National Institute of Occupational Safety and Health (NIOSH). Dermal Exposure Assessment Method (DREAM) readings showed that dermal exposure with manual spraying ranged from moderate to high. With motorized sprayers, however, the level of dermal exposure ranged from low to moderate. Dermal exposure was significantly negatively correlated with the usage of protective clothing. Various types of deleterious health effects were detected among users of manual knapsack sprayers. Long-term spraying activities were positively correlated with increasing levels of the gamma-glutamyl transpeptidase (GGT) liver enzyme. The type of spraying equipment, usage of proper protective clothing and adherence to correct spraying practices were found to be the most important factors influencing the degree of pesticide exposure among those applying pesticides.
    Matched MeSH terms: Inhalation Exposure/analysis*
  6. Wong HL, Garthwaite DG, Ramwell CT, Brown CD
    Environ Sci Pollut Res Int, 2017 Dec;24(34):26444-26461.
    PMID: 28948535 DOI: 10.1007/s11356-017-0064-5
    This study investigated changes over 25 years (1987-2012) in pesticide usage in orchards in England and Wales and associated changes to exposure and risk for resident pregnant women living 100 and 1000 m downwind of treated areas. A model was developed to estimate aggregated daily exposure to pesticides via inhaled vapour and indirect dermal contact with contaminated ground, whilst risk was expressed as a hazard quotient (HQ) based on estimated exposure and the no observed (adverse) effect level for reproductive and developmental effects. Results show the largest changes occurred between 1987 and 1996 with total pesticide usage reduced by ca. 25%, exposure per unit of pesticide applied slightly increased, and a reduction in risk per unit exposure by factors of 1.3 to 3. Thereafter, there were no consistent changes in use between 1996 and 2012, with an increase in number of applications to each crop balanced by a decrease in average application rate. Exposure per unit of pesticide applied decreased consistently over this period such that values in 2012 for this metric were 48-65% of those in 1987, and there were further smaller decreases in risk per unit exposure. All aggregated hazard quotients were two to three orders of magnitude smaller than one, despite the inherent simplifications of assuming co-occurrence of exposure to all pesticides and additivity of effects. Hazard quotients at 1000 m were 5 to 16 times smaller than those at 100 m. There were clear signals of the impact of regulatory intervention in improving the fate and hazard profiles of pesticides used in orchards in England and Wales over the period investigated.
    Matched MeSH terms: Inhalation Exposure/analysis
  7. Nazariah SS, Juliana J, Abdah MA
    Glob J Health Sci, 2013 Jul;5(4):93-105.
    PMID: 23777726 DOI: 10.5539/gjhs.v5n4p93
    In the last few years, air within homes have been indicates by various and emerging body as more serious polluted than those outdoor. Prevalence of respiratory inflammation among school children aged 8 and 10 years old attending national primary schools in urban and rural area were conducted in Klang Valley. Two population studies drawn from the questionnaires were used to investigate the association between indoor particulate matter (PM2.5 & PM10) in a home environment and respiratory implication through the understanding of biological responses. Approximately 430 healthy school children of Standard 2 and Standard 5 were selected. Indication of respiratory symptoms using adaptation questionnaire from American Thoracic Society (1978). Sputum sample collection taken for biological analysis. IL-6 then was analyse by using ELISA techniques. Indoor PM2.5 and PM10 were measured using Dust Trak Aerosol Monitor. The mean concentration of PM2.5 (45.38 µg/m3) and PM10 (80.07 µg/m3) in urban home environment is significantly higher compared to those in rural residential area (p=0.001). Similar trend also shows by the prevalence of respiratory symptom. Association were found with PM2.5 and PM10 with the level of IL-6 among school children. A greater exposure to PM2.5 and PM10 are associated with higher expression of IL-6 level suggesting that the concentration of indoor particulate in urban density area significantly influence the health of children.
    Matched MeSH terms: Inhalation Exposure/analysis
  8. Hamzah NA, Mohd Tamrin SB, Ismail NH
    Int J Occup Environ Health, 2016 07;22(3):224-232.
    PMID: 27392157 DOI: 10.1080/10773525.2016.1207040
    BACKGROUND: Metallic dust is a heterogeneous substance with respiratory sensitizing properties. Its long term exposure adversely affected lung function, thus may cause acute or chronic respiratory diseases.

    METHODS: A cross-sectional study was conducted in a steel factory in Terengganu, Malaysia to assess the metal dust exposure and its relationship to lung function values among 184 workers. Metal dust concentrations values (Co, Cr, and Ni) for each worker were collected using air personal sampling. Lung function values (FEV1, FVC, and %FEV1/FVC) were determined using spirometer.

    RESULTS: Exposure to cobalt and chromium were 1-3 times higher than permissible exposure limit (PEL) while nickel was not exceeding the PEL. Cumulative of chromium was the predictor to all lung function values (FEV1, FVC, and %FEV1/FVC). Frequency of using mask was positively associated with FVC (Adj b = 0.263, P = 0.011) while past respiratory illnesses were negatively associated with %FEV1/FVC (Adj b = -1.452, P = 0.026). Only few workers (36.4%) were found to wear their masks all times during the working hours.

    CONCLUSIONS: There was an exposure-response relationship of cumulative metal dust exposure with the deterioration of lung function values. Improvement of control measures as well as proper and efficient use or personal protection equipment while at work could help to protect the respiratory health of workers.

    Matched MeSH terms: Inhalation Exposure/analysis
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links