Displaying publications 1 - 20 of 387 in total

Abstract:
Sort:
  1. Meliana C, Liu J, Show PL, Low SS
    Bioengineered, 2024 Dec;15(1):2310908.
    PMID: 38303521 DOI: 10.1080/21655979.2024.2310908
    The burden of food contamination and food wastage has significantly contributed to the increased prevalence of foodborne disease and food insecurity all over the world. Due to this, there is an urgent need to develop a smarter food traceability system. Recent advancements in biosensors that are easy-to-use, rapid yet selective, sensitive, and cost-effective have shown great promise to meet the critical demand for onsite and immediate diagnosis and treatment of food safety and quality control (i.e. point-of-care technology). This review article focuses on the recent development of different biosensors for food safety and quality monitoring. In general, the application of biosensors in agriculture (i.e. pre-harvest stage) for early detection and routine control of plant infections or stress is discussed. Afterward, a more detailed advancement of biosensors in the past five years within the food supply chain (i.e. post-harvest stage) to detect different types of food contaminants and smart food packaging is highlighted. A section that discusses perspectives for the development of biosensors in the future is also mentioned.
    Matched MeSH terms: Food Safety*
  2. Oni OZ, Olanrewaju A, Cheen KS
    Int J Occup Saf Ergon, 2024 Jun;30(2):366-377.
    PMID: 38243387 DOI: 10.1080/10803548.2024.2308376
    Objectives. Notwithstanding its economic importance, the construction industry is still facing challenges due to its high accident record. As a result, the goal of this study is to identify the key underlying causes of accidents in the Malaysian construction industry that construction stakeholders can focus on to reduce the menace of accidents in the industry. Methods. To achieve this goal, relevant literature was reviewed in order to identify the causes of accidents. The identified factors were used to develop the survey questionnaire for collecting primary data, and the collected data were analysed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Results. The results of the EFA and CFA establish and confirm 11 clusters for the causes of accidents on construction sites: management problems; inadequate training; inadequate supervision; mental health problems; bad attitudes; inadequate funding; inadequate experience; material and equipment handling; poor safety practices; inadequate orientation; and work environment. Conclusion. The study concludes that addressing all 11 factors will drastically reduce the incessant accident occurrences in the construction industry. The result of this study will help construction stakeholders know where to direct their energy in an effort to reduce construction accidents.
    Matched MeSH terms: Safety Management
  3. Fakhlaei R, Babadi AA, Sun C, Ariffin NM, Khatib A, Selamat J, et al.
    Food Chem, 2024 May 30;441:138402.
    PMID: 38218155 DOI: 10.1016/j.foodchem.2024.138402
    Safety and quality aspects of food products have always been critical issues for the food production and processing industries. Since conventional quality measurements are laborious, time-consuming, and expensive, it is vital to develop new, fast, non-invasive, cost-effective, and direct techniques to eliminate those challenges. Recently, non-destructive techniques have been applied in the food sector to improve the quality and safety of foodstuffs. The aim of this review is an effort to list non-destructive techniques (X-ray, computer tomography, ultraviolet-visible spectroscopy, hyperspectral imaging, infrared, Raman, terahertz, nuclear magnetic resonance, magnetic resonance imaging, and ultrasound imaging) based on the electromagnetic spectrum and discuss their principle and application in the food sector. This review provides an in-depth assessment of the different non-destructive techniques used for the quality and safety analysis of foodstuffs. We also discussed comprehensively about advantages, disadvantages, challenges, and opportunities for the application of each technique and recommended some solutions and developments for future trends.
    Matched MeSH terms: Food Safety
  4. Fang K, Azizan SA, Huang H
    Sci Rep, 2024 Apr 07;14(1):8139.
    PMID: 38584168 DOI: 10.1038/s41598-024-58712-5
    Pedestrian safety, particularly for children, relies on well-designed pathways. Child-friendly pathways play a crucial role in safeguarding young pedestrians. Shared spaces accommodating both vehicles and walkers can bring benefits to pedestrians. However, active children playing near these pathways are prone to accidents. This research aims to develop an efficient method for planning child-friendly pedestrian pathways, taking into account community development and the specific needs of children. A mixed-methods approach was employed, utilizing the Datang community in Guangzhou, China, as a case study. This approach combined drawing techniques with GIS data analysis. Drawing methods were utilized to identify points of interest for children aged 2-6. The qualitative and quantitative fuzzy analytic hierarchy process assessed factors influencing pathway planning, assigning appropriate weights. The weighted superposition analysis method constructed a comprehensive cost grid, considering various community elements. To streamline the planning process, a GIS tool was developed based on the identified factors, resulting in a practical, child-friendly pedestrian pathway network. Results indicate that this method efficiently creates child-friendly pathways, ensuring optimal connectivity within the planned road network.
    Matched MeSH terms: Safety
  5. Alhammad A, Yusof MM, Jambari DI
    Expert Rev Med Devices, 2024 Mar;21(3):217-229.
    PMID: 38318674 DOI: 10.1080/17434440.2024.2315024
    INTRODUCTION: Medical device (MD)-integrated (I) electronic medical record (EMR) (MDI-EMR) poses cyber threats that undermine patient safety, and thus, they require effective control mechanisms. We reviewed the related literature, including existing EMR and MD risk assessment approaches, to identify MDI-EMR comprehensive evaluation dimensions and measures.

    AREAS COVERED: We searched multiple databases, including PubMed, Web of Knowledge, Scopus, ACM, Embase, IEEE and Ingenta. We explored various evaluation aspects of MD and EMR to gain a better understanding of their complex integration. We reviewed numerous risk management and assessment frameworks related to MD and EMR security aspects and mitigation controls and then identified their common evaluation aspects. Our review indicated that previous evaluation frameworks assessed MD and EMR independently. To address this gap, we proposed an evaluation framework based on the sociotechnical dimensions of health information systems and risk assessment approaches for MDs to evaluate MDI-EMR integratively.

    EXPERT OPINION: The emergence of MDI-EMR cyber threats requires appropriate evaluation tools to ensure the safe development and application of MDI-EMR. Consequently, our proposed framework will continue to evolve through subsequent validations and refinements. This process aims to establish its applicability in informing stakeholders of the safety level and assessing its effectiveness in mitigating risks for future improvements.

    Matched MeSH terms: Patient Safety*
  6. Otitolaiye VO, Abd Aziz FS
    J Safety Res, 2024 Feb;88:111-124.
    PMID: 38485354 DOI: 10.1016/j.jsr.2023.10.014
    INTRODUCTION: Occupational health and safety (OHS) has become an integral part of human society, particularly considering the growing rates of injuries and deaths worldwide. Hence, numerous employers, governments, and stakeholders worldwide have established critical OHS measures to safeguard human health and occupational safety. Numerous studies have been conducted to identify and highlight risks and hazards, as well as to detect, monitor, minimize, and prevent workplace injuries and deaths.

    METHOD: This study presents the publication trends, research landscape, and scientific developments related to safety management systems (SMS) based on published documents from the Elsevier Scopus database. Published documents on SMS and indexed in Scopus are identified, screened, and analyzed to examine the publication trends, research developments, and scientific landscape. For this purpose, Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA), bibliometric analysis (B.A.), and systematic literature review (SLR) procedures are used. The results reveal that 799 related documents were published between 2001 and 2021.

    RESULTS: The most productive stakeholders, that is, top researchers, affiliations, and countries, include Liesbeth Jacxsens, Universiteit Gent (Belgium), and the United States. This study shows that the availability of research grants, incentives, or awards is critical to the productivity of top researchers, institutions, and nations actively researching SMS topics. The bibliometric analysis reveals that the topic is characterized by high productivity, co-authorships, keyword occurrence, and citations.

    CONCLUSION: The analysis shows that SMS research is a broad, multidimensional, and impactful area that has become essential for identifying, reducing, monitoring, and eliminating risks in many industries. It is concluded that the topic of the SMS remains relevant because of its impact on human health, occupational safety, and environmental well-being.

    PRACTICAL APPLICATIONS: This study provides in-depth insight into expanding the scope of SMS research. Moreover, research and policymakers can facilitate decision-making and collaboration based on this study's outtakes.

    Matched MeSH terms: Safety Management
  7. Barlow M, Watson B, Jones E, Morse C, Maccallum F
    J Interprof Care, 2024 Jan 02;38(1):42-51.
    PMID: 37702325 DOI: 10.1080/13561820.2023.2249939
    Speaking up for patient safety is a well-documented, complex communication interaction, which is challenging both to teach and to implement into practice. In this study we used Communication Accommodation Theory to explore receivers' perceptions and their self-reported behaviors during an actual speaking up interaction in a health context. Intergroup dynamics were evident across interactions. Where seniority of the participants was salient, the within-profession interactions had more influence on the receiver's initial reactions and overall evaluation of the message, compared to the between profession interactions. Most of the seniority salient interactions occurred down the hierarchy, where a more senior professional ingroup member delivered the speaking up message to a more junior receiver. These senior speaker interactions elicited fear and impeded the receiver's voice. We found that nurses/midwives and allied health clinicians reported using different communication behaviors in speaking up interactions. We propose that the term "speaking up" be changed, to emphasize receivers' reactions when they are spoken up to, to help receivers engage in more mutually beneficial communication strategies.
    Matched MeSH terms: Patient Safety
  8. Shi H, Nadeem MA
    Int J Occup Saf Ergon, 2023 Dec;29(4):1383-1394.
    PMID: 36178706 DOI: 10.1080/10803548.2022.2131274
    Objectives. This article aims to prompt first-line workers to go beyond regular job roles and engage in more discretionary safety behavior-safety participation in the Chinese construction industry. The construction industry is a high-risk industry, and first-line workers are more likely to be exposed to workplace hazards. Once accidents happen, the negative consequences would come out. Therefore, employee voluntary safety behavior is focused on in this research. Methods. The present research framework examines the roles of safety leadership and safety management practices from the group and organizational perspectives in predicting the voluntary safety behavior (safety participation) of first-line workers in the Chinese construction industry through casual-chain mediators (safety climate and job satisfaction). In this study, partial least squares structural equation modeling (PLS-SEM) is adopted for data analysis and hypotheses testing. Results. After data analysis, the results show that safety leadership and safety management practices are significantly and positively associated with safety participation of first-line workers through safety climate and job satisfaction. Moreover, safety management practices have a more statistical effect on safety climate compared to safety leadership. Conclusions. These results provide some practical implications for facilitating the workers to conduct safety participation inthe construction industry.
    Matched MeSH terms: Safety; Safety Management
  9. Rashid MI, Athar M, Noor F, Hussain A
    Int J Occup Saf Ergon, 2023 Dec;29(4):1440-1450.
    PMID: 36221985 DOI: 10.1080/10803548.2022.2135282
    Objectives. This article describes the reduction of unsafe behaviors observed at a fertilizer complex by implementation of a behavior-based safety (BBS) program via a behavior observation form developed by a multidisciplinary team. Methods. Six observation categories, i.e., position of people, reaction of people, personal protective equipment (PPE), tools used, operating procedures and housekeeping, are used to monitor safe and unsafe behaviors for a period of 18 months. Results. Safe behaviors increased from 57 to 70% and unsafe behaviors reduced from 40 to 26%. Behaviors of employees working in various sections of fertilizer complex such as ammonia, urea, utility, bagging/shipping and workshop were also observed. Non-compliance with PPE, housekeeping and standard operating procedures was also monitored in individual sections. Non-operational areas including the administration block, housing colony, maintenance workshop, warehouse, fire station and electrical substation were also observed. Among these, the maximum unsafe behaviors are for the housing colony and minimum for the electrical substation. Conclusion. It has been concluded that working on the housing colony, administration block and fire station areas will address 74% unsafe behaviors of non-operational areas. For practical applications, worldwide industries can implement this BBS program to enhance BBS, thus reducing unsafe behaviors and increasing employee morale.
    Matched MeSH terms: Safety Management/methods
  10. Rahman MB, Hussain M, Kabiraz MP, Nordin N, Siddiqui SA, Bhowmik S, et al.
    Food Chem, 2023 Nov 30;427:136761.
    PMID: 37406446 DOI: 10.1016/j.foodchem.2023.136761
    Formaldehyde is added illegally to food to extend its shelf life due to its antiseptic and preservation properties. Several research has been conducted to examine the consequences of adulteration with formaldehyde in food items. These findings suggest that adding formaldehyde to food is considered harmful as it accumulates in the body with long-term consumption. In this review includes study findings on food adulteration with formaldehyde and their assessment of food safety based on the analytical method applied to various geographical regions, food matrix types, and their sources in food items. Additionally, this review sought to assess the risk of formaldehyde-tainted food and the understanding of its development in food and its impacts on food safety in light of the widespread formaldehyde adulteration. Finally, the study would be useful as a manual for implementing adequate and successful risk assessment to increase food safety.
    Matched MeSH terms: Food Safety*
  11. Siddiqui SA, Tettey E, Yunusa BM, Ngah N, Debrah SK, Yang X, et al.
    Compr Rev Food Sci Food Saf, 2023 Nov;22(6):4786-4830.
    PMID: 37823805 DOI: 10.1111/1541-4337.13243
    Insect consumption is a traditional practice in many countries. Currently, the urgent need for ensuring food sustainability and the high pressure from degrading environment are urging food scientists to rethink the possibility of introducing edible insects as a promising food type. However, due to the lack of the standardized legislative rules and the adequate scientific data that demonstrate the safety of edible insects, many countries still consider it a grey area to introduce edible insects into food supply chains. In this review, we comprehensively reviewed the legal situation, consumer willingness, acceptance, and the knowledge on edible insect harvesting, processing as well as their safety concerns. We found that, despite the great advantage of introducing edible insects in food supply chains, the legal situation and consumer acceptance for edible insects are still unsatisfactory and vary considerably in different countries, which mostly depend on geographical locations and cultural backgrounds involving psychological, social, religious, and anthropological factors. Besides, the safety concern of edible insect consumption is still a major issue hurdling the promotion of edible insects, which is particularly concerning for countries with no practice in consuming insects. Fortunately, the situation is improving. So far, some commercial insect products like energy bars, burgers, and snack foods have emerged in the market. Furthermore, the European Union has also recently issued a specific item for regulating new foods, which is believed to establish an authorized procedure to promote insect-based foods and should be an important step for marketizing edible insects in the near future.
    Matched MeSH terms: Food Safety
  12. Grant R, Benamouzig D, Catton H, Cheng VC, Dhingra N, Laxminarayan R, et al.
    Lancet Infect Dis, 2023 Oct;23(10):1108-1110.
    PMID: 37572686 DOI: 10.1016/S1473-3099(23)00485-1
    Matched MeSH terms: Patient Safety
  13. Arifin K, Ali MXM, Abas A, Ahmad MA, Ahamad MA, Sahimi AS
    J Safety Res, 2023 Sep;86:376-389.
    PMID: 37718065 DOI: 10.1016/j.jsr.2023.07.017
    INTRODUCTION: The electrical utility industry, which plays a vital role in sustaining other sectors, contributes to high occupational accident rates in the utility industries. The high accident rate shows that there has been insufficient effort made to control unsafe actions and conditions in the workplace. This study aims to examine the influence of hazard control and prevention as leading indicators of safety behaviors and outcomes in coal-fired power plants in Malaysia.

    METHODS: This quantitative research was conducted by distributing survey questionnaires randomly to five coal-fired power plants in Peninsular Malaysia. A total of 340 respondents were involved in this research. Partial least squares structural equation modeling (PLS-SEM) analysis was performed using SmartPLS to validate and examine the relationship of the proposed model.

    RESULTS: The results validate the construct of hazard control and prevention consisting of planning, action, managing, and verifying, while the safety outcomes construct consists of occupational accidents, fatal accidents, near misses, and lost time injuries. The results indicate that hazard control and prevention significantly relate to safety compliance, safety participation, safety motivation, and safety knowledge. Moreover, safety outcomes were influenced negatively by hazard control and prevention through safety compliance.

    CONCLUSION: The model provides a better understanding of the influence of hazard control and prevention on safety behavior and outcomes.

    PRACTICAL APPLICATIONS: The model can be used as guidance for practitioners and researchers in planning and implementing hazard control and prevention to improve health and safety in the workplace.

    Matched MeSH terms: Safety Management*
  14. Fauziningtyas R, Chan CM, Pin TM, Dhamanti I, Smith GD
    Int J Older People Nurs, 2023 Sep;18(5):e12553.
    PMID: 37334471 DOI: 10.1111/opn.12553
    INTRODUCTION: The development of resident safety culture in nursing homes (NH) represents a major challenge for governments and NH owners, with a requirement for suitable tools to assess safety culture. Indonesia currently lacks suitable safety cultures scales for NH.

    OBJECTIVES: To evaluate the psychometric properties of the translated Indonesian version of the Nursing Home Survey on Patient Safety Culture (NHSOPSC-INA).

    METHODS: This study was a cross-sectional survey conducted using NHSOPSC-INA. A total of 258 participants from 20 NH in Indonesia were engaged. Participants included NH managers, caregivers, administrative staff, nurses and support staff with at least junior high school education. The SPSS 23.0 was used for descriptive data analysis and internal consistency (Cronbach's alpha) estimation. The AMOS (version 22) was used to perform confirmatory factor analysis (CFA) on the questionnaire's dimensional structure.

    RESULTS: The NHSOPSC CFA test originally had 12 dimensions with 42 items and was modified to eight dimensions with 26 items in the Indonesian version. The deleted dimensions were 'Staffing' (4 items), 'Compliance with procedure' (3 items), 'Training and skills' (3 items), 'non-punitive response to mistakes' (4 items) and 'Organisational learning' (2 items). The subsequent analysis revealed an accepted model with 26 NHSOPSC-INA items (root mean square error of approximation = 0.091, comparative fit index = 0.815, Tucker-Lewis index = 0.793, CMIN = 798.488, df = 291, CMIN/Df = 2.74, GFI = 0.782, AGFI = 0.737, p 

    Matched MeSH terms: Safety Management; Patient Safety*
  15. Sapkota B, Palaian S, Shrestha S, Ibrahim MIM
    Ther Innov Regul Sci, 2023 Jul;57(4):886-898.
    PMID: 37106236 DOI: 10.1007/s43441-023-00514-4
    Materiovigilance (Mv) has the same purpose and approach in ensuring patient safety as pharmacovigilance but deals with medical devices associated with adverse events (MDAEs) and their monitoring. Mv has been instrumental in recalling many defective or malfunctioning devices based on their safety data. All MDAEs, such as critical or non-critical, known, or unknown, those with inadequate or incomplete specifications, and frequent or rare events should be reported and evaluated. Mv helps to improve medical devices' design and efficiency profile and avoid device-related complications and associated failures. It alerts consumers and health professionals regarding counterfeit or substandard devices. Common events reported through Mv are device breakage and malfunction, entry- and exit-site infections, organ perforations or injuries, need for surgery and even death, and life cycle assessment of devices. Health authorities globally have developed reporting frameworks with timeframes for MDAEs, such as MedWatch in the USA, MedSafe in New Zealand, and others. Health professionals and consumers need to be made aware of the significance of Mv in ensuring the safe use of medical devices and getting familiar with the reporting procedures and action plans in case of a device-induced adverse event.
    Matched MeSH terms: Patient Safety
  16. Odu JO, Hamedon TR, Mahmud A, Baharudin R
    Med J Malaysia, 2023 May;78(3):308-317.
    PMID: 37271840
    INTRODUCTION: Studies have shown that a workplace safety culture (WSC) is lacking among the general workforce in Nigeria. Poor WSC can adversely impact workers' health and high remedial costs for employers. To improve WSC, workers need to improve related knowledge, attitude, and practices (KAP) towards WSC through effective health interventional programs at the workplace. The main objective of this study is to develop, implement and evaluate the effectiveness of the Work Safety Culture Health Education Module (WSCHEM). The specific goals are to improve KAP related to office ergonomics towards WSC among public sector administrative workers in Abeokuta, Nigeria MATERIALS AND METHODS: The study was a two-armed, singleblinded cluster randomised controlled trial (CRCT) involving 247 public sector administrative workers from clusters of 20 ministries in Abeokuta, Southwestern Nigeria. The intervention group was given WSCHEM, whereas the waitlist group received a seminar on team building and leadership skills and received the WSCHEM after the intervention program ended. The evaluation was done three times using the first formal validated, self-administered Work Safety Culture Questionnaire (WSCQ) among the administrative workers: first at baseline, second at 1 month, and third at 3 months post-intervention.

    RESULT: The results showed no statistically significant differences between groups regarding the respondents' characteristics (socio-demographic and occupational/officerelated ergonomic factors) and the outcome variables KAP towards WSC at baseline. For practices towards WSC, both intervention (β 6.8, 95%CI 4.85, 8.72) and time (β 6.2, 95%CI 4.49, 7.94) significantly improved the respondents' practices towards WSC in the per-protocol analysis. In the secondary outcomes, both knowledge of WSC, intervention (β 3.5, 95%CI 2.8, 4.2) and time (β 3.4, 95%CI 2.7, 5.9); and attitudes towards WSC, intervention (β1.7, 95%CI 1.25, 2.23) and time (β 2.3, 95%CI 1.92, 2.76) significantly improved the respondents' level of knowledge and attitudes respectively towards WSC.

    CONCLUSION: The intervention, WSCHEM, was effective in improving the administrative workers' KAP towards WSC, as demonstrated by the significance between and within-group differences.

    Matched MeSH terms: Safety Management
  17. Adegoye GA, Tolar-Peterson T, Ene-Obong HN, Nuntah JN, Pasqualino MM, Mathews R, et al.
    PMID: 36981799 DOI: 10.3390/ijerph20064891
    INTRODUCTION: fish can be an affordable and accessible animal-source food in many Low- and Middle-Income Countries (LMIC).

    BACKGROUND: Traditional fish processing methods pose a risk of exposing fish to various contaminants that may reduce their nutritional benefit. In addition, a lack of literacy may increase women fish processors' vulnerability to malnutrition and foodborne diseases.

    OBJECTIVE: The overall aim of the project was to educate women and youth fish processors in Delta State, Nigeria about the benefit of fish in the human diet and to develop low literacy tools to help them better market their products. The objective of this study was to describe the development and validation of a low-literacy flipbook designed to teach women fish processors about nutrition and food safety.

    METHOD: developing and validating instructional material requires understanding the population, high-quality and relevant graphics, and the involvement of relevant experts to conduct the content validation using the Content Validity Index (CVI) and the index value translated with the Modified Kappa Index (k).

    RESULT: The Item-level Content Validity Index (I-CVI) value of all domains evaluated at the initial stage was 0.83 and the Scale-level Content Validity Index (S-CVI) was 0.90. At the final stage, the material was validated with CVI 0.983 by four experts and satisfied the expected minimum CVI value for this study (CVI ≥ 0.83, p-value = 0.05). The overall evaluation of the newly developed and validated flipbook was "excellent".

    CONCLUSIONS: the developed material was found to be appropriate for training fish processors in Nigeria in nutrition and food safety and could be modified for a population of fish processors in other LMICs.

    Matched MeSH terms: Food Safety
  18. Buniya MK, Othman I, Sunindijo RY, Karakhan AA, Kineber AF, Durdyev S
    Int J Occup Saf Ergon, 2023 Mar;29(1):129-140.
    PMID: 35125068 DOI: 10.1080/10803548.2022.2038419
    Implementing a safety program is an essential step toward improving safety performance. This research aims to develop an overall project success (OPS) model for building projects through investigating the direct and indirect impact of safety critical success factors (CSFs) on OPS mediated by safety program elements. First, interviews were carried out with experts in the Iraqi construction industry, and then a questionnaire survey was utilized to obtain feedback from construction professionals. The results revealed that 20 elements are needed to confirm and improve effectiveness. These elements were categorized into four constructs: management commitment and employee involvement, worksite analysis, hazard and prevention control, and health and safety training. The analysis confirms that the relationship between safety CSFs and OPS are mediated by safety program elements. These findings offer a glimmer of hope for implementing safety programs in the Iraqi construction sector, and can also be used to enhance safety performance.
    Matched MeSH terms: Safety Management
  19. Rohani N, Yusof MM
    Int J Med Inform, 2023 Feb;170:104958.
    PMID: 36608630 DOI: 10.1016/j.ijmedinf.2022.104958
    BACKGROUND: Pharmacy information systems (PhIS) can cause medication errors that pharmacists may overlook due to their increased workload and lack of understanding of maintaining information quality. This study seeks to identify factors influencing unintended consequences of PhIS and how they affect the information quality, which can pose a risk to patient safety.

    MATERIALS AND METHODS: This qualitative, explanatory case study evaluated PhIS in ambulatory pharmacies in a hospital and a clinic. Data were collected through observations, interviews, and document analysis. We applied the socio-technical interactive analysis (ISTA) framework to investigate the socio-technical interactions of pharmacy information systems that lead to unintended consequences. We then adopted the human-organization-process-technology-fit (HOPT-fit) framework to identify their contributing and dominant factors, misfits, and mitigation measures.

    RESULTS: We identified 28 unintended consequences of PhIS, their key contributing factors, and their interrelations with the systems. The primary causes of unintended consequences include system rigidity and complexity, unclear knowledge, understanding, skills, and purpose of using the system, use of hybrid paper and electronic documentation, unclear and confusing transitions, additions and duplication of tasks and roles in the workflow, and time pressure, causing cognitive overload and workarounds. Recommended mitigating mechanisms include human factor principles in system design, data quality improvement for PhIS in terms of effective use of workspace, training, PhIS master data management, and communication by standardizing workarounds.

    CONCLUSION: Threats to information quality emerge in PhIS because of its poor design, a failure to coordinate its functions and clinical tasks, and pharmacists' lack of understanding of the system use. Therefore, safe system design, fostering awareness in maintaining the information quality of PhIS and cultivating its safe use in organizations is essential to ensure patient safety. The proposed evaluation approach facilitates the evaluator to identify complex socio-technical interactions and unintended consequences factors, impact, and mitigation mechanisms.

    Matched MeSH terms: Patient Safety
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links