MyMedR

Displaying publications 221 - 240 of 500 in total

Abstract:

Sort:

Fulltext Ganoderma neo-japonicum Imazeki revisited: Domestication study and antioxidant properties of its basidiocarps and mycelia

Tan WC, Kuppusamy UR, Phan CW, Tan YS, Raman J, Anuar AM, et al.

Sci Rep, 2015;5:12515.
PMID: 26213331 DOI: 10.1038/srep12515

Mushroom cultivation benefits humankind as it deliberately encourages wild mushrooms to be commercially propagated while recycling agricultural wastes. Ganoderma neo-japonicum is a rare polypore mushroom found growing on decaying Schizostachyum brachycladium (a tropical bamboo) clumps in Malaysia. The Malaysian indigenous tribes including the Temuans and Temiars use the basidiocarps of G. neo-japonicum to treat various ailments including diabetes. In this study, the domestication of G. neo-japonicum in artificial logs of different agricultural residues was investigated. Sawdust promoted the mycelia spawn colonisation in the shortest period of 38 ± 0.5 days. However, only sawdust and bamboo dust supported the primodia formation. Complex medium supported mycelium growth in submerged cultures and 27.11 ± 0.43 g/L of mycelia was obtained after 2 weeks of cultivation at 28 °C and 200 rpm. Antioxidant potential in mushroom may be influenced by different cultivation and extraction methods. The different extracts from the wild and cultivated basidiocarps as well as mycelia were then tested for their antioxidant properties. Aqueous and ethanol extracts of mycelia and basidiocarps tested had varying levels of antioxidant activities. To conclude, domestication of wild G. neo-japonicum using agroresidues may ensure a continuous supply of G. neo-japonicum for its medicinal use while ensuring the conservation of this rare species.

Matched MeSH terms: Ethanol
Fulltext Evaluation of in-vitro antioxidant and antibacterial properties of Commelina nudiflora L. extracts prepared by different polar solvents

Kuppusamy P, Yusoff MM, Parine NR, Govindan N

Saudi J Biol Sci, 2015 May;22(3):293-301.
PMID: 25972750 DOI: 10.1016/j.sjbs.2014.09.016

The study explored on the commonly available weed plant Commelina nudiflora which has potential in-vitro antioxidant and antimicrobial activity. The different polar solvents such as ethanol, chloroform, dichloromethane, hexane and aqueous were used for the soxhlet extraction. The extracts were identified pharmacologically as important bioactive compounds and their potential free radical scavenging activities, and antimicrobial properties were studied. C. nudiflora extracts were monitored on their in-vitro antioxidant ability by DPPH and ABTS radical scavenging assay. Aqueous extract shows significant free radical scavenging activity of 63.4 mg/GAE and 49.10 mg/g in DPPH and ABTS respectively. Furthermore, the aqueous crude extract was used in antibacterial studies, which shows the highest inhibitory activity against Pseudomonas aeruginosa, Escherichia coli and Salmonella typhi. Among all the extracts, aqueous extract of C. nudiflora has significant control over free radical scavenging activity and inhibition of the growth of food pathogenic bacteria. Also, the aqueous extract contains abundance of phenolics and flavonoids higher than other extracts. This study explored weed plant C. nudiflora as a potential source of antioxidant and antibacterial efficacy and identified various therapeutic value bioactive compounds from GC-MS analysis.

Matched MeSH terms: Ethanol
Bisulfite pretreatment changes the structure and properties of oil palm empty fruit bunch to improve enzymatic hydrolysis and bioethanol production

Tan L, Sun W, Li X, Zhao J, Qu Y, Choo YM, et al.

Biotechnol J, 2015 Jun;10(6):915-25.
PMID: 25866127 DOI: 10.1002/biot.201400733

Bisulfite pretreatment is a proven effective method for improving the enzymatic hydrolysis of empty fruit bunch (EFB) from oil palm for bioethanol production. In this study, we set out to determine the changes that occur in the structure and properties of EFB materials and fractions of hemicellulose and lignin during the bisulfite pretreatment process. The results showed that the crystallinity of cellulose in EFB increased after bisulfite pretreatment, whereas the EFB surface was damaged to various degrees. The orderly structure of EFB, which was maintained by hydrogen bonds, was destroyed by bisulfite pretreatment. Bisulfite pretreatment also hydrolyzed the glycosidic bonds of the xylan backbone of hemicellulose, thereby decreasing the molecular weight and shortening the xylan chains. The lignin fractions obtained from EFB and pretreated EFB were typically G-S lignin, and with low content of H units. Meanwhile, de-etherification occurred at the β-O-4 linkage, which was accompanied by polymerization and demethoxylation as a result of bisulfite pretreatment. The adsorption ability of cellulase differed for the various lignin fractions, and the water-soluble lignin fractions had higher adsorption capacity on cellulase than the milled wood lignin. In general, the changes in the structure and properties of EFB provided insight into the benefits of bisulfite pretreatment.

Matched MeSH terms: Ethanol
Fatty acid compositions in local sea cucumber, Stichopus chloronotus, for wound healing

Fredalina BD, Ridzwan BH, Abidin AA, Kaswandi MA, Zaiton H, Zali I, et al.

Gen. Pharmacol., 1999 Oct;33(4):337-40.
PMID: 10523072

Fatty acid profile from crude extracts of local sea cucumber Stichopus chloronotus was determined using gas chromatography (GC) technique. The extracts were prepared separately in methanol, ethanol, phosphate buffer saline (PBS), and distilled water as part of our study to look at the affinity of these solvents in extracting the lipid from sea cucumber. The PBS and distilled water extractions indicate water-soluble components, while the organic fractions are extracted in methanol and ethanol as organic solvents. Furthermore, water extraction is the conventional method practiced in Malaysia. In our analysis the C14:0 (myristic), C16:0 (palmitic), C18:0 (stearic), C18:2 (linoleic), C20:0 (arachidic), and C20:5 (eicosapentaenoic, EPA) were significantly different (p < 0.01) in the four solvent extractions. However, the PBS extraction contained a much higher percentage of EPA (25.69%) compared to 18.89% in ethanol, 7.84% in distilled water, and only 5.83% in methanol, and variances were significantly different (p < 0.01 ). On the other hand, C22:6 (docosahexaenoic acid or DHA) is much higher in water extraction (57.55%), in comparison to the others where only 3.63% in PBS and 1.20% in methanol, and this difference is significant at p < 0.01. No DHA was detected in ethanol extractions. Subsequently, C18:1 (oleic acid) was only detected in PBS (21.98%) and water extraction (7.50%). It is interesting that palmitic acid, C16:() was higher in methanol (20.82%) and ethanol (2.18%), while 12.55% was detected in PBS and only 2.20% in water extraction: and again this was significantly different at p < 0.01. Although our results have shown that all four solvents were different in terms of their ability to extract fatty acids, the major component for tissue repair was well preserved. Probably this is one of the important precocious steps when working with a delicate sea cucumber, in both experimental and/or at the preparative stages. Freshness of the sea cucumber samples is important when undertaking this type of experiment. Finally, we believe that the local sea cucumber S. chloronotus contains all the fatty acids required to play a potential active role in tissue repair.

Matched MeSH terms: Ethanol; Methanol
Palm vitamin E and the healing of ethanol-induced gastric lesions

Ismail NM, Jaarin K, Ahmad A, Marzuki A, Ng WK, Gapor MT

Asia Pac J Clin Nutr, 1999 Dec;8(4):258-62.
PMID: 24394225

The main focus of the study was to examine the effect of palm vitamin E (a tocotrienol-enriched fraction of palm oil) on the healing of ethanol-induced gastric mucosal lesions. The study was divided into three sections.Study 1 determined the gastric content of vitamin E after dietary supplementation with palm vitamin E for 3 weeks. Seven rats were fed a normal diet and another 7 were fed a palm vitamin E-enriched diet (150 mg/kg food). The gastric content of vitamin E levels were higher in rats fed with a palm vitamin E-enriched diet (p<0.01). Study 2 determined the time-dependent effects of palm vitamin E on gastric lesions and gastric acidity postethanol administration. Two groups of rats were fed either a normal rat diet or a palm vitamin E-enriched diet (150 mg/kg food). After 3 weeks, the control and a treated group received a single intragastric dose of 100% ethanol. Assessment of gastric lesions after 1 week showed a lower gastric lesion index in the palm vitamin E group compared with the controls (p<0.05) but there was no difference in the gastric acid content after 1 week between the two groups. Study 3 determined the effects of palm vitamin E on the gastric tissue content of malondialdehyde (MDA), PGE2 and gastric acidity without ethanol administration. The MDA content was lower in the palm vitamin E-treated group (p<0.05). However, the gastric acid and PGE2 content in both groups did not differ. The findings suggest that feeding with a palm vitamin E-enriched diet (150 mg/kg food) for 3 weeks resulted in a significant concentration of vitamin E in the gastric tissue. It was concluded that palm vitamin E may promote the healing of ethanol-induced gastric lesions through minimizing the lipid preoccupation process in the gastric mucous.

Matched MeSH terms: Ethanol
New crown-shaped polyoxovanadium(V) cluster cation with a mu(6)-sulfato anion and zwitterionic mu-(beta-alanine): crystal structure of [V(6)O(12)(OH)(3)(O(2)CCH(2)CH(2)NH(3))(3)(SO(4))][Na][SO(4)].13H(2)O

Ng CH, Lim CW, Teoh SG, Fun HK, Usman A, Ng SW

Inorg Chem, 2002 Jan 14;41(1):2-3.
PMID: 11782136

Treatment of vanadium(V) oxide with an ethanol-concentrated sulfuric acid mixture, followed by the addition of an equimolar amount of beta-alanine and sodium hydroxide, and finally raising the pH to 3.9 with sodium carbonate solution, under continuous heating in a water bath and in the presence of air, leads to the polyionic sodium cyclo-[mu(6)-(sulfato-O,O',O'')tris[mu-(beta-alanine-O,O')-mu-oxo]tris(mu-hydroxo-mu-oxo)hexa[oxovanadium(V)]] sulfate tridecahydrate which crystallizes in the monoclinic P2(1)/n space group [a = 9.5192(4), b = 20.1185(9), c = 22.6174(9) A, beta = 97.011(1) degrees; Z = 4]. The crown-shaped polyoxovanadium(V) cluster cation, with carboxylate-bridging amino acid ligands, has an Anderson structure with two unique capping sulfato ligands. Its structural analysis, together with IR, UV-vis, and preliminary data on its solution properties, is presented.

Matched MeSH terms: Ethanol
Fulltext Interaction between vitamin E and glutathione in rat brain: Effect of chronic ethanol administration

Marcus SR, Chandrakala MV, Nadiger HA

Asia Pac J Clin Nutr, 1998 Dec;7(3/4):201-5.
PMID: 24393672

The protection against ethanol-induced lipid peroxidation is rendered by antioxidants such as vitamin E and glutathione (GSH) interacting with each other and also functioning independently. A study of the levels of GSH and activities of glutathione peroxidase (GP), glutathione reductase (GR) and glutathione transferase (GST) in the cerebral cortex (CC), cerebellum (CB) and brain stem (BS) of vitamin E-supplemented and -deficient rats subjected to ethanol administration for 30 days was carried out. Chronic ethanol administration to vitamin E-supplemented rats elevated GP, GR and GST activities in the three regions and GSH levels in the CB. Chronic ethanol administration to vitamin E-deficient rats elevated GR activity in the three regions and GP activity in the CC and CB, decreased GST activity in the CC and CB, but did not alter GSH levels compared with normal rats subjected to chronic ethanol administration. The results indicate that vitamin E helps to maintain GSH levels to combat increased peroxidation while its absence has a deleterious effect.

Matched MeSH terms: Ethanol
Fulltext Reinventing nano drug delivery systems for hydrophilic active ingredients in Ayurvedic lipid based formulations containing poly herbal decoction

Duraipandi S, Selvakumar V

J Ayurveda Integr Med, 2019 01 08;11(3):224-227.
PMID: 30635246 DOI: 10.1016/j.jaim.2018.01.008

BACKGROUND: Anu Tailam, an Ayurvedic medicated oil where 'anu' meant for atom and 'tailam' meant for oil and virtually meant for 'oil of subtle or atomic size particles'. Since the major active ingredients in this formulation are incorporated from the polyherbal decoction, it is expected to contain predominantly water soluble ingredients.
OBJECTIVES: It is hypothesized that these polar active botanical ingredients are present in the formulation should be either suspended in the form of submicron particles or entrapped in the submicron vesicular structures since the formulation did not show any precipitation or phase separation instead showed a monophasic oily liquid with very little moisture.
MATERIALS AND METHODS: In the present investigation, the micro architecture of the anu tailam is studied via column chromatography and high performance thin layer chromatography to prove the contents are polar hydrophilic compounds followed by optical microscopy, photon correlation Spectroscopy (PCS) and environmental scanning electron microscope (ESEM) to study the particle/vesicle size of the formulation.
RESULTS: In this study, it was proved that the formulation contained only polar ingredients and can be extracted in polar solvents like methanol and ethanol. It was also found that the formulation taken for study contained nano particles of the active botanical ingredients embedded in a network of vesicular structures of the lipid base.
CONCLUSION: The selected Ayurvedic formulation 'anutailam' found to contain novel nano drug delivery system to deliver water soluble ingredients across barriers.

Matched MeSH terms: Ethanol; Methanol
Fulltext Graphene/PVA buckypaper for strain sensing application

Mehmood A, Mubarak NM, Khalid M, Jagadish P, Walvekar R, Abdullah EC

Sci Rep, 2020 11 18;10(1):20106.
PMID: 33208815 DOI: 10.1038/s41598-020-77139-2

Strain sensors in the form of buckypaper (BP) infiltrated with various polymers are considered a viable option for strain sensor applications such as structural health monitoring and human motion detection. Graphene has outstanding properties in terms of strength, heat and current conduction, optics, and many more. However, graphene in the form of BP has not been considered earlier for strain sensing applications. In this work, graphene-based BP infiltrated with polyvinyl alcohol (PVA) was synthesized by vacuum filtration technique and polymer intercalation. First, Graphene oxide (GO) was prepared via treatment with sulphuric acid and nitric acid. Whereas, to obtain high-quality BP, GO was sonicated in ethanol for 20 min with sonication intensity of 60%. FTIR studies confirmed the oxygenated groups on the surface of GO while the dispersion characteristics were validated using zeta potential analysis. The nanocomposite was synthesized by varying BP and PVA concentrations. Mechanical and electrical properties were measured using a computerized tensile testing machine, two probe method, and hall effect, respectively. The electrical conducting properties of the nanocomposites decreased with increasing PVA content; likewise, electron mobility also decreased while electrical resistance increased. The optimization study reports the highest mechanical properties such as tensile strength, Young's Modulus, and elongation at break of 200.55 MPa, 6.59 GPa, and 6.79%, respectively. Finally, electrochemical testing in a strain range of ε ~ 4% also testifies superior strain sensing properties of 60 wt% graphene BP/PVA with a demonstration of repeatability, accuracy, and preciseness for five loading and unloading cycles with a gauge factor of 1.33. Thus, results prove the usefulness of the nanocomposite for commercial and industrial applications.

Matched MeSH terms: Ethanol
Fulltext Determination of Temperature-Dependent Coefficients of Viscosity and Surface Tension of Tamarind Seeds (Tamarindus indica L.) Polymer

Malviya R, Jha S, Fuloria NK, Subramaniyan V, Chakravarthi S, Sathasivam K, et al.

Polymers (Basel), 2021 Feb 18;13(4).
PMID: 33670569 DOI: 10.3390/polym13040610

The rheological properties of tamarind seed polymer are characterized for its possible commercialization in the food and pharmaceutical industry. Seed polymer was extracted using water as a solvent and ethyl alcohol as a precipitating agent. The temperature's effect on the rheological behavior of the polymeric solution was studied. In addition to this, the temperature coefficient, viscosity, surface tension, activation energy, Gibbs free energy, Reynolds number, and entropy of fusion were calculated by using the Arrhenius, Gibbs-Helmholtz, Frenkel-Eyring, and Eotvos equations, respectively. The activation energy of the gum was found to be 20.46 ± 1.06 kJ/mol. Changes in entropy and enthalpy were found to be 23.66 ± 0.97 and -0.10 ± 0.01 kJ/mol, respectively. The calculated amount of entropy of fusion was found to be 0.88 kJ/mol. A considerable decrease in apparent viscosity and surface tension was produced when the temperature was raised. The present study concludes that the tamarind seed polymer solution is less sensitive to temperature change in comparison to Albzia lebbac gum, Ficus glumosa gum and A. marcocarpa gum. This study also concludes that the attainment of the transition state of viscous flow for tamarind seed gum is accompanied by bond breaking. The excellent physicochemical properties of tamarind seed polymers make them promising excipients for future drug formulation and make their application in the food and cosmetics industry possible.

Matched MeSH terms: Ethanol
Fulltext A New Model of Alcoholic Fermentation under a Byproduct Inhibitory Effect

Zentou H, Zainal Abidin Z, Yunus R, Awang Biak DR, Abdullah Issa M, Yahaya Pudza M

ACS Omega, 2021 Feb 16;6(6):4137-4146.
PMID: 33644536 DOI: 10.1021/acsomega.0c04025

Despite the advantages of continuous fermentation whereby ethanol is selectively removed from the fermenting broth to reduce the end-product inhibition, this process can concentrate minor secondary products to the point where they become toxic to the yeast. This study aims to develop a new mathematical model do describe the inhibitory effect of byproducts on alcoholic fermentation including glycerol, lactic acid, acetic acid, and succinic acid, which were reported as major byproducts during batch alcoholic fermentation. The accumulation of these byproducts during the different stages of batch fermentation has been quantified. The yields of total byproducts, glycerol, acetic acid, and succinic acid per gram of glucose were 0.0442, 0.023, 0.0155, and 0.0054, respectively. It was found that the concentration of these byproducts linearly increases with the increase in glucose concentration in the range of 25-250 g/L. The results have also showed that byproduct concentration has a significant inhibitory effect on specific growth coefficient (μ) whereas no effect was observed on the half-velocity constant (Ks). A new mathematical model of alcoholic fermentation was developed considering the byproduct inhibitory effect, which showed a good performance and more accuracy compared to the classical Monod model.

Matched MeSH terms: Ethanol
Fulltext Electrodeposited Hybrid Biocathode-Based CO2 Reduction via Microbial Electro-Catalysis to Biofuels

Anwer AH, Khan N, Umar MF, Rafatullah M, Khan MZ

Membranes (Basel), 2021 Mar 22;11(3).
PMID: 33810075 DOI: 10.3390/membranes11030223

Microbial electrosynthesis is a new approach to converting C1 carbon (CO2) to more complex carbon-based products. In the present study, CO2, a potential greenhouse gas, was used as a sole carbon source and reduced to value-added chemicals (acetate, ethanol) with the help of bioelectrochemical reduction in microbial electrosynthesis systems (MES). The performance of MES was studied with varying electrode materials (carbon felt, stainless steel, and cobalt electrodeposited carbon felt). The MES performance was assessed in terms of acetic acid and ethanol production with the help of gas chromatography (GC). The electrochemical characterization of the system was analyzed with chronoamperometry and cyclic voltammetry. The study revealed that the MES operated with hybrid cobalt electrodeposited carbon felt electrode yielded the highest acetic acid (4.4 g/L) concentration followed by carbon felt/stainless steel (3.7 g/L), plain carbon felt (2.2 g/L), and stainless steel (1.87 g/L). The alcohol concentration was also observed to be highest for the hybrid electrode (carbon felt/stainless steel/cobalt oxide is 0.352 g/L) as compared to the bare electrodes (carbon felt is 0.22 g/L) tested, which was found to be in correspondence with the pH changes in the system. Electrochemical analysis revealed improved electrotrophy in the hybrid electrode, as confirmed by the increased redox current for the hybrid electrode as compared to plain electrodes. Cyclic voltammetry analysis also confirmed the role of the biocatalyst developed on the electrode in CO2 sequestration.

Matched MeSH terms: Ethanol
Fulltext In vitro antileptospiral activity of trigona thoracia propolis and its synergistic effects with commonly prescribed antibiotics

Siti Radziah Ismail

IIUM Medical Journal Malaysia, 2020;19(1):13-22.
MyJurnal

Introduction: Trigona thoracica propolis is known to have antimicrobial properties, however its
antileptospiral properties and its synergistic effects with commonly prescribed antibiotics are scarcely
documented. This study aimed to evaluate the antileptospiral properties of Trigona thoracica against
pathogenic Leptospira species (spp.) and to study its synergistic effects with commonly prescribed
antibiotics. Materials and Methods: The tested Leptospira serovars were Australis, Bataviae, Canicola and
Javanica. Aqueous extract propolis (AEP) and ethanolic extracts propolis (EEP) were used. Broth dilution
methods were used to determine the Minimum Inhibitory Concentration (MIC), Minimum Bactericidal
Concentration (MBC) and the synergistic effects between the propolis and the tested antibiotics. The
synergistic effects was evaluated by using the fractional inhibitory concentration (FIC) index. Morphological
changes of the treated Leptospira were observed under a Scanning Electron Microscope (SEM). Results: The
AEP and EEP were found to have antileptospiral properties against the tested Leptospira spp. The synergy
result showed that only combination of AEP and penicillin G against serovar Australis has demonstrated
synergistic effect with the FIC index of 0.38. Morphological study using SEM showed significant structural
changes of the treated Leptospira spp. Conclusions: The result suggests that Trigona thoracica propolis could
potentially be used as either a complimentary or an alternative therapeutic agent against pathogenic
Leptospira spp.

Matched MeSH terms: Ethanol
Surfactant-functionalised magnetic ferum oxide coupled with high performance liquid chromatography for the extraction of phenol

Beh SY, Md Saleh N, Asman S

Anal Methods, 2021 02 07;13(5):607-619.
PMID: 33480366 DOI: 10.1039/d0ay02166k

The usage of phenols in the marketplace has been increasing tremendously, which has raised concerns about their toxicity and potential effect as emerging pollutants. Phenol's structure has closely bonded phenyl and hydroxy groups, thereby making its functional characteristics closely similar to that of alcohol. As a result, phenol is used as a base compound for commercial home-based products. Hence, a simple and efficient procedure is required to determine the low concentration of phenols in environmental water samples. In this research, a method of combining magnetic nanoparticles (MNPs) with surfactant Sylgard 309 was developed to overcome the drawbacks in the classical extraction methods. In addition, this developed method improved the performance of extraction when MNPs and the surfactant Sylgard 309 were used separately, as reported in the previous research. This MNP-Sylgard 309 was synthesised by the coprecipitation method and attracts phenolic compounds in environmental water samples. Response surface methodology was used to study the parameters and responses in order to obtain an optimised condition using MNP-Sylgard 309. The parameters included the effect of pH, extraction time, and concentration of the analyte. Meanwhile, the responses measured were the peak area of the chromatogram and the percentage recovery. From this study, the results of the optimum conditions for extraction using MNP-Sylgard 309 were pH 7, extraction time of 20 min, and analyte concentration of 10.0 μg mL-1. Under the optimized conditions, MNP-Sylgard 309 showed a low limit of detection of 0.665 μg mL-1 and the limit of quantification was about 2.219 μg mL-1. MNP-Sylgard 309 was successfully applied on environmental water samples such as lake and river water. High recovery (76.23%-110.23%) was obtained.

Matched MeSH terms: Ethanol
Fulltext Oral microbiome, nutrition and their role in oral carcinogenesis

Mohd Hafiz Arzmi

Malaysian Journal of Medicine and Health Sciences, 2019;15(108):10-10.
MyJurnal

A balanced oral microbiome is essential in maintaining a healthy oral cavity. Oral microbiome comprises of var-ious microorganisms that belong to different kingdoms, including bacteria (bacteriome) and fungal (mycobiome). Multiple factors have been shown in oral carcinogenesis including alcohol consumption, tobacco smoking, betel nut chewing and microbial infections. Since the oral cavity comprises of various microbial kingdoms, thus, in-ter-kingdom interactions are suggested in promoting oral carcinogenesis. Dysbiosis, which is defined as imbalance inter-kingdom microbiome, alone may not cause oral carcinogenesis; thus, it is suggested that nutritional factor may also play a vital role in this disease development. A recent study has shown that sucrose consumption can induce the production of glucosyltransferases (gtfs) by Streptococcus mutans which lead to the increasing attachment of Candida albicans in polymicrobial biofilms form. The yeast has been reported to be potentially involved in oral carcinogenesis, particularly in the immunocompromised patient. This is due to the inflammation that is caused by candidal infection, which increases pro-inflammatory cytokines such as interleukin-6, interleukin-8 and interleu-kin-10, that have been linked to oral carcinogenesis. However, further study is needed to conform to the claim. In addition, over-consumption of alcoholic beverages has also been related to carcinogenesis which the ethanol has been reported to be converted into acetaldehyde by C. albicans using acetaldehyde dehydrogenases enzymes. In Malaysia, oral cancer has also been related to the consumption of cured and salted fish, which mostly consumed by the Chinese ethnics. However, its relationship to oral microbiome remains unclear. In conclusion, oral microbiome and nutrition may have a role in oral carcinogenesis; however, further study is needed to elucidate the role of both factors in oral cancer development.

Matched MeSH terms: Ethanol
Tea from the drinking to the synthesis of metal complexes and fabrication of PVA based polymer composites with controlled optical band gap

Brza MA, Aziz SB, Anuar H, Ali F, Dannoun EMA, Mohammed SJ, et al.

Sci Rep, 2020 Oct 22;10(1):18108.
PMID: 33093604 DOI: 10.1038/s41598-020-75138-x

In the present study black tea extract (BTE) solution which is familiar for drinking was used to prepare cerium metal-complexes (Ce(III)-complex). The prepared Ce(III)-complex was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and UV-Vis spectroscopy. The results indicate that BTE solution is a novel green coordination chemistry approach for the synthesis of metal complexes. The outcomes signify that coordination occurs between cerium cations and polyphenols. The synthesis of metal-complexes with superior absorption performance in the visible region is a challenge for optoelectronic device applications. The suspended Ce(III)-complex in distilled water was mixed with poly (vinyl alcohol) (PVA) polymer to fabricate PVA/ Ce(III)-complex composites with controlled optical properties. The PVA/Ce(III)-complexes composite films were characterized by FTIR, XRD, and UV-Vis spectroscopy. The XRD findings confirms the amorphous structure for the synthesized Ce(III)-complexes. The addition of Ce(III)-complex into the PVA host polymer led to the growth of polymer composites with controllable small optical band gaps. It is shown by the FTIR spectra of the composite films that the functional groups of the host PVA have a vigorous interaction with the Ce(III)-complex. The XRD deconvolution on PVA composites reveals the amorphous phase enlargement with increasing Ce(III)-complex concentration. It is indicated in the atomic force microscopy (AFM) that the surface roughness in the doped PVA films increases with the increase of the Ce(III)-complex. There is a decrease in absorption edge from 5.7 to 1.7 eV. It becomes possible to recognize the type of electron transition by studying both the Tauc's model and optical dielectric loss (ɛi) parameter.

Matched MeSH terms: Ethanol
Fulltext Phytochemical screening and larvicidal activity of murraya koenigii leaves ethanolic extract against aedes aegypti

Norazsida Binti Ramli, Nur Elia Amira Mohd Roslin, Deny Susanti

International Journal of Allied Health Sciences, 2018;2(1):129-139.
MyJurnal

World Health Organization (WHO) estimated over 100 million dengue infections to happen annually worldwide involving more than 2.5 billion people. Temephos or abate is a larvicide that has been used in vector control to eradicate mosquito larvae. Though practically low risk, there had been resistance problem reported with continuous use. This study seeks to find an effective and safer alternative to abate by assessing the use of ethanolic extract of Murraya koenigii leaves as larvicidal agent against Aedes aegypti. M.koenigii leaves were macerated for 3 days with absolute ethanol and evaporated using rotary vapor to produce the crude extract. The crude extract was subjected to phytochemical screening using standard qualitative method. For bioassay, the crude
extract underwent a serial dilution to produce 3 concentrations of 100 ppm (C1), 50 ppm (C2) and 10 ppm (C3) with abate and absolute ethanol as negative and positive control respectively. Bioassay for larvicidal effect was conducted in accordance to WHO standard method. Phytochemical screening of ethanolic extract of M. koenigii leaves revealed the presence of alkaloid, steroid and saponin. The bioassay shows that after 24 hours, the mortality rate of C1, C2 and C3 larvae were 100%, 38% and 0% and when further extended to 48 hours, the rate increased to 100% and 46% for C2 and C3 respectively. The LC50 and LC99 post 24 hours were 54.489 ppm and 93.961 ppm respectively whilst at post 48 hours, the LC50 and LC99 were 10.263 ppm and 16.176 ppm respectively. The results show that up to 48 hours duration of exposure, the mortality
rate increase whilst the lethal concentration (LC50 and LC99) decreases. Upon examination on larvae deformities at post 24 and 48 hours, all test concentrations and negative control exhibit normal morphology. Positive control, however, exhibit deformities characterized by twisted and fragmented insides. When statistically analyzed, C1 larvicidal activity was proven comparable with abate at 24 hours while C2 needed 48 hours exposure to be on par. Based on the results, it could be argued that the ethanolic extract of M.koenigii leaves does hold promising value to be further developed as larvicidal.

Matched MeSH terms: Ethanol
Fulltext Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Arumugam S, Kandasamy J, Md Shah AU, Hameed Sultan MT, Safri SNA, Abdul Majid MS, et al.

Polymers (Basel), 2020 Jul 06;12(7).
PMID: 32640502 DOI: 10.3390/polym12071501

This study aims to explore the mechanical properties of hybrid glass fiber (GF)/sisal fiber (SF)/chitosan (CTS) composite material for orthopedic long bone plate applications. The GF/SF/CTS hybrid composite possesses a unique sandwich structure and comprises GF/CTS/epoxy as the external layers and SF/CTS/epoxy as the inner layers. The composite plate resembles the human bone structure (spongy internal cancellous matrix and rigid external cortical). The mechanical properties of the prepared hybrid sandwich composites samples were evaluated using tensile, flexural, micro hardness, and compression tests. The scanning electron microscopic (SEM) images were studied to analyze the failure mechanism of these composite samples. Besides, contact angle (CA) and water absorption tests were conducted using the sessile drop method to examine the wettability properties of the SF/CTS/epoxy and GF/SF/CTS/epoxy composites. Additionally, the porosity of the GF/SF/CTS composite scaffold samples were determined by using the ethanol infiltration method. The mechanical test results show that the GF/SF/CTS hybrid composites exhibit the bending strength of 343 MPa, ultimate tensile strength of 146 MPa, and compressive strength of 380 MPa with higher Young's modulus in the bending tests (21.56 GPa) compared to the tensile (6646 MPa) and compressive modulus (2046 MPa). Wettability study results reveal that the GF/SF/CTS composite scaffolds were hydrophobic (CA = 92.41° ± 1.71°) with less water absorption of 3.436% compared to the SF/CTS composites (6.953%). The SF/CTS composites show a hydrophilic character (CA = 54.28° ± 3.06°). The experimental tests prove that the GF/SF/CTS hybrid composite can be used for orthopedic bone fracture plate applications in future.

Matched MeSH terms: Ethanol
Fulltext Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid

Chieng ZH, Mohyaldinn ME, Hassan AM, Bruining H

Polymers (Basel), 2020 Jun 30;12(7).
PMID: 32629958 DOI: 10.3390/polym12071470

In hydraulic fracturing, fracturing fluids are used to create fractures in a hydrocarbon reservoir throughout transported proppant into the fractures. The application of many fields proves that conventional fracturing fluid has the disadvantages of residue(s), which causes serious clogging of the reservoir's formations and, thus, leads to reduce the permeability in these hydrocarbon reservoirs. The development of clean (and cost-effective) fracturing fluid is a main driver of the hydraulic fracturing process. Presently, viscoelastic surfactant (VES)-fluid is one of the most widely used fracturing fluids in the hydraulic fracturing development of unconventional reservoirs, due to its non-residue(s) characteristics. However, conventional single-chain VES-fluid has a low temperature and shear resistance. In this study, two modified VES-fluid are developed as new thickening fracturing fluids, which consist of more single-chain coupled by hydrotropes (i.e., ionic organic salts) through non-covalent interaction. This new development is achieved by the formulation of mixing long chain cationic surfactant cetyltrimethylammonium bromide (CTAB) with organic acids, which are citric acid (CA) and maleic acid (MA) at a molar ratio of (3:1) and (2:1), respectively. As an innovative approach CTAB and CA are combined to obtain a solution (i.e., CTAB-based VES-fluid) with optimal properties for fracturing and this behaviour of the CTAB-based VES-fluid is experimentally corroborated. A rheometer was used to evaluate the visco-elasticity and shear rate & temperature resistance, while sand-carrying suspension capability was investigated by measuring the settling velocity of the transported proppant in the fluid. Moreover, the gel breaking capability was investigated by determining the viscosity of broken VES-fluid after mixing with ethanol, and the degree of core damage (i.e., permeability performance) caused by VES-fluid was evaluated while using core-flooding test. The experimental results show that, at pH-value ( 6.17 ), 30 (mM) VES-fluid (i.e., CTAB-CA) possesses the highest visco-elasticity as the apparent viscosity at zero shear-rate reached nearly to 10 6 (mPa·s). Moreover, the apparent viscosity of the 30 (mM) CTAB-CA VES-fluid remains 60 (mPa·s) at (90 ∘ C) and 170 (s - 1 ) after shearing for 2-h, indicating that CTAB-CA fluid has excellent temperature and shear resistance. Furthermore, excellent sand suspension and gel breaking ability of 30 (mM) CTAB-CA VES-fluid at 90 ( ∘ C) was shown; as the sand suspension velocity is 1.67 (mm/s) and complete gel breaking was achieved within 2 h after mixing with the ethanol at the ratio of 10:1. The core flooding experiments indicate that the core damage rate caused by the CTAB-CA VES-fluid is ( 7.99 % ), which indicate that it does not cause much damage. Based on the experimental results, it is expected that CTAB-CA VES-fluid under high-temperature will make the proposed new VES-fluid an attractive thickening fracturing fluid.

Matched MeSH terms: Ethanol
Fulltext Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite

Sharip NS, Ariffin H, Yasim-Anuar TAT, Andou Y, Shirosaki Y, Jawaid M, et al.

Polymers (Basel), 2021 Jan 27;13(3).
PMID: 33513876 DOI: 10.3390/polym13030404

The major hurdle in melt-processing of ultra-high molecular weight polyethylene (UHMWPE) nanocomposite lies on the high melt viscosity of the UHMWPE, which may contribute to poor dispersion and distribution of the nanofiller. In this study, UHMWPE/cellulose nanofiber (UHMWPE/CNF) bionanocomposites were prepared by two different blending methods: (i) melt blending at 150 °C in a triple screw kneading extruder, and (ii) non-melt blending by ethanol mixing at room temperature. Results showed that melt-processing of UHMWPE without CNF (MB-UHMWPE/0) exhibited an increment in yield strength and Young's modulus by 15% and 25%, respectively, compared to the Neat-UHMWPE. Tensile strength was however reduced by almost half. Ethanol mixed sample without CNF (EM-UHMWPE/0) on the other hand showed slight decrement in all mechanical properties tested. At 0.5% CNF inclusion, the mechanical properties of melt-blended bionanocomposites (MB-UHMWPE/0.5) were improved as compared to Neat-UHMWPE. It was also found that the yield strength, elongation at break, Young's modulus, toughness and crystallinity of MB-UHMWPE/0.5 were higher by 28%, 61%, 47%, 45% and 11%, respectively, as compared to the ethanol mixing sample (EM-UHMWPE/0.5). Despite the reduction in tensile strength of MB-UHMWPE/0.5, the value i.e., 28.4 ± 1.0 MPa surpassed the minimum requirement of standard specification for fabricated UHMWPE in surgical implant application. Overall, melt-blending processing is more suitable for the preparation of UHMWPE/CNF bionanocomposites as exhibited by their characteristics presented herein. A better mechanical interlocking between UHMWPE and CNF at high temperature mixing with kneading was evident through FE-SEM observation, explains the higher mechanical properties of MB-UHMWPE/0.5 as compared to EM-UHMWPE/0.5.

Matched MeSH terms: Ethanol

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links