Displaying publications 261 - 280 of 1115 in total

Abstract:
Sort:
  1. Fulltext Stingless bee honey and its potential value: a systematic review
    Yaacob, M., Rajab N.F., Shahar, S., Sharif, R.
    Food Research, 2018;2(2):124-133.
    MyJurnal
    Modern science has found that most traditional practice of using stingless bee honey has
    great potential as an added value in modern medicine and considered to have a higher
    medicinal value than other bee species. However, due to the relatively low output of honey
    compared to other honey so, focus on this honey is limited. Hence, this systematic review
    provides the updated result on the potential value of stingless bee honey as an antioxidant,
    anti-inflammatory, cytotoxicity and antimicrobial. The search strategy was developed in
    four databases (Scopus, Medline and Ovid, EMBASE and PubMed) with the search terms
    "("honey" and "Kelulut", "honey" and "stingless bee", "honey" and "Trigona", "honey"
    and "pot honey", and "honey" and "Melipon")". The merged data was assessed using
    PRISMA guidelines and after the duplicates were removed, 1271 articles were segregated.
    Afterwards, 1232 articles were eliminated because they do not meet the inclusion criteria
    and 39 articles were reevaluated again for eligibility. Finally, after the evaluation process,
    only 26 of the articles were chosen for this review. The data of 26 articles of stingless bee
    honey were deliberated based on antioxidant properties, anti-inflammatory, cytotoxicity
    and analysis of antimicrobial activity. Three articles reported on antioxidant properties,
    one article on anti-inflammatory analysis, two articles on cytotoxicity analysis, and twenty
    articles on analysis of antimicrobial activity. Based on the feasible affirmation from the
    literature, stingless bee honey has an antioxidant capacity that able to decrease the ROS.
    ROS able to lead a variety of health problems thus stingless bee honey can be a dietary
    supplement to overcome this problem.
    Matched MeSH terms: Reactive Oxygen Species
  2. Fulltext Single cultures of acinetobacter sp. and cellulosimicrobium sp. grown in pineapple waste: adaption study and potential in reducing cod from real textile wastewater
    Nor Habibah Mohd Rosli, Wan Azlina Ahmad
    Science Letters, 2018;12(1):30-43.
    MyJurnal
    Wastewater from industrial plants such as textile, electroplating and petroleum refineries contains various substances that tend to increase the chemical oxygen demand (COD) of the wastewater. Therefore, it is desired to develop a process suitable for treating the wastewater to meet the regulatory limits. This work was conducted to investigate the potential of adapted single culture of A. baumannii, A.calcoaceticus and C.cellulans in reducing COD in real textile wastewater. The study was carried out by adapting each single culture (10% inoculums) to increasing concentration (1%, 2.5 %, 5%, 7.5 % and 10%) of textile wastewater. Then it was introduced to the textile effluent without pH adjustment for five days and the COD values were measured. The textile wastewater was supplemented with pineapple waste for bacterial growth and metabolism. Results obtained showed that pineapple waste was a good nutrient supply for the growth of the bacteria and the best concentration of textile wastewater for adaptation was at 2.5%. The results also showed that A.calcoaceticus shows highest COD reduction with 67% removal whereas A. baumannii and C.cellulans with 60% and 58% removal respectively. The outcome supported that the single culture used in this study showed considerably high reduction of COD from real textile wastewater.
    Matched MeSH terms: Biological Oxygen Demand Analysis
  3. Fulltext Effect of cetyle trimethyl ammonium bromide (CTAB) surfactant on nanofiltration membrane for dye removal
    Abdul Rahman Hassan, Nurul Hannan Mohd Safari, Sabariah Rozali, Hafizan Juahir, Mohd Khairul Amri Kamarudin
    Malaysian Journal of Applied Sciences, 2018;2(2):29-36.
    MyJurnal
    Nanofiltration membranes technology commonly used for wastewater treatment especially
    wastewater containing charged and/or uncharged species. Commonly, textile wastewater
    possesses high chemical oxygen demand (COD) and non-biodegradable compounds such as
    pigments and dyes which lead to environmental hazard and serious health problem. Therefore, the
    objective of this study was to investigate the effects of hydrophilic surfactant on the preparation and
    performance of Active Nanofiltration (ANF) membrane. The polymeric ANF membranes were
    prepared via dry/wet phase inversion technique by immersion precipitation process. The
    Cetyletrimethylammonium bromide (CTAB) as cationic surfactant was added in casting solution at
    concentrations from 0 to 2.5 wt%. The synthesized membrane performance was evaluated in terms
    of pure water permeation (PWP) and dye rejection. The experimental data showed that the
    membrane demonstrated good increment of PWP ranging from 0.27 to 10.28 L/m2
    h at applied
    pressure from 100 to 500kPa, respectively. Meanwhile, the ANF membranes achieved high
    removal of Methyl Blue and Reactive Black 5 dye up to 99.5% and 91.6%, respectively.
    Matched MeSH terms: Biological Oxygen Demand Analysis
  4. Characterisation of Aciplex Membrane by X-ray Photoelectron Spectroscopy
    Abu Bakar Mohamad, Wan Ramli Wan Daud, Amir Kadhum, Fathi Messaud, Mohd. Ambar Yarmo
    Sains Malaysiana, 1997;26.
    Chemical structure of treated and untreated Aciplex membrane has been studied by X-ray Photoelectron Spectroscopy (XPS). Survey spectra showed that both membrane surfaces consist of Fluorine, Carbon, Oxygen, Sulphur and trace of Titanium. Binding energies for the elements are (C1s at 290.6 eV, F1s at 687.5 eV, O1s at 531.3 eV, S2P at 168.1 eV and Ti2P at 454.4 eV). Analysis of narrow scan XPS-spectra of each element demonstrate the presence of (-CF, -CF2, CF3, C-O-C and SO-3) groups, which are in agreement with the structural formula as disclosed by the manufacturer. There is no significant change in chemical states of untreated and treated membrane, which reflect its stability to treatment conditions.
    Struktur kimia Aciplex membran yang sudah dibersihkan dan yang belum dibersihkan telah dikaji menggunakan Spektroskopi Fotoelektron Sinaran-X (XPS). Spektra yang telah ditinjau menunjukkan bahawa kedua-dua permukaan membran mengandungi Florin, Karbon, Oksigen, Sulfur dan sedikit Titanium. Tenaga ikatan bagi unsur-unsur tersebut adalah (C1s pada 290.6 eV, F1s pada 687.5 eV. O1s pada 531.3 eV, S2P pada 168.2 eV dan Ti2P pada 454.4 eV). Analisis imbasan kecil spektra-xps bagi setiap unsur menunjukkan kehadiran kilmpulan (-CF, - CF2, CF3, C-O-C dan SO-3) yang bertepatan dengan formula struktur dari pihak pembekal. Tiada terdapat perubahan nyata berhubung dengan keadaan kimia membran yang sudah dibersihkan dan yang belum dibersihkan yang menggambarkan kestabilannya terhadap keadaan pembersihan.
    Matched MeSH terms: Oxygen
  5. Nitridation of Al-Mg-Si alloys through dynamic heating
    Roslinda Shamsudin, Abdul Razak Daud, Muhammad Azmi Abdul Hamid, Saiful Rizam Shamsudin
    Sains Malaysiana, 2007;36:195-200.
    Nitridation behaviour of Al-Mg-Si alloys was studied as a function of temperature by means of thermogravimetry method. A reactive gas, N2-4%H2 at a rate of 10 ml/min was purged into the thermogravimetry analyser chamber. The Al alloys were heated from 25oC to 625oC at the heating rate of 15oC/min and then reduced to 3oC/min until it reached 1500oC. It was found that by varying the amount of Mg and Si in Al-Mg-Si alloys significantly influenced the growth of the composites. A differential thermogravimetric curve shows the Mg containing alloys experienced many steps of chemical reactions. This indicates that besides AlN presence as a major phase, other compounds also exist in the final product. The X-ray diffraction results confirmed the existence of oxide phases such as a-Al2O3, MgAl2O4 and MgO in addition to residual Si and Al metal. The presence of oxide compounds is believed to be due to the reaction between the alloying elements and residual oxygen gas left in the reaction atmosphere. It was also found that Si could play a role in promoting the weight gain of the composite produced. The heating rate has also a profound effect on the weight gain, whereby higher heating rate resulted in low yielded of AlN during the nitridation reaction of the Al-Mg-Si alloys.
    Matched MeSH terms: Oxygen
  6. Surface analysis of marine sulphate-reducing bacteria exopolymers on steel during biocorrosion using x-ray photoelectron spectroscopy
    Fathul Karim Sahrani, Madzlan Abd. Aziz, Zaharah Ibrahim, Adibah Yahya
    Sains Malaysiana, 2008;37.
    The aim of this study was to determine the surface chemistry during biocorrosion process on growth and on the production of exopolymeric substances (EPS) in batch cultures of mix-strains of marine sulphate-reducing bacteria (SRB) isolated from Malaysian Shipyard and Engineering Harbours, Pasir Gudang. The EPS and precipitates were analyzed by x-ray photoelectron spectroscopy (XPS). The XPS results indicate that Fe(2p3/2) spectrum for iron sulphide can be fitted with Fe(II) and Fe(III) components, both corresponding to Fe-S bond types. The absence of oxide oxygen in the O(1s) spectrum and Fe(III)-O bond types in the Fe(2p3/2) spectrum supports the conclusion that iron sulphides are composed of both ferric and ferrous iron coordinated with monosulphide and disulphide.
    Matched MeSH terms: Oxygen
  7. Fish diversity and water quality during flood mitigation works at Semariang mangrove area, Kuching, Sarawak, Malaysia
    Nyanti L, Nur 'Asikin R, Ling T, Jongkar G
    Sains Malaysiana, 2012;41:1517-1525.
    This study aimed to document the fish diversity and water quality at Semariang mangrove area, Kuching, Sarawak, which is located at the eastern part of Kuching Wetland National Park. Field samplings were carried out in 2009 during the construction of the flood mitigation channel at the eastern part of the park. A total of 21 families represented by 37 species of fish were caught from the area. The six dominant families in terms of the number of individuals caught were Mugilidae (16%), Leiognathidae (16%), Ambassidae (11%), Ariidae (9%), Lutjanidae (8%) and Plotosidae (6%). In terms of the percentage of six dominant genera based on the number of individuals caught, 16% was represented by Valamugil, 11% by Ambassis, 10% by Gazza, 9% by Arius, 8% by Lutjanus and 6% by Plotosus. The values of diversity and richness indices were lower at stations located close to the flood mitigation channel. Similarly, the concentrations of dissolved oxygen were lower and total suspended solids were significantly higher at stations close to the channel and sand mining area. Therefore, fish fauna and water quality at Semariang mangrove area were affected during the construction of the flood mitigation channel.
    Matched MeSH terms: Oxygen
  8. Effects of thermal stratification on the concentration of iron and manganese in a tropical water supply reservoir
    Noor Halini Baharim, Razali Ismail, Mohamad Hanif Omar
    Sains Malaysiana, 2011;40:1179-1186.
    Thermal stratification in lakes is an important natural process that can have a significant effect on the water resource quality. The potential changes in chemical contents in water resulting from stratification are the production of ammonia, sulphides and algal nutrients and the increasing concentrations of iron and manganese. One of the water supply reservoirs located in Johor, Malaysia facing with high iron and manganese concentrations associated with the period of stratifications. This study showed that the level of thermal stratification in the reservoir varied at different time of the year. During the strongest period of stratification, the dissolved oxygen content was found to diminish significantly with depth and iron and manganese were recorded at the highest concentrations. Although significant period of rainfalls contributed to the natural destratification of reservoir, lower concentrations of iron and manganese only remained for a shorter period before the concentrations continued to increase with the onset of the thermal stratification. A good understanding on the behaviour of the reservoir may help to identify several measures for the improvement of water quality.
    Matched MeSH terms: Oxygen
  9. Microbial fuel cells using mixed cultures of wastewater for electricity generation
    Zain S, Roslani N, Hashim R, Anuar N, Suja F, Basri N, et al.
    Sains Malaysiana, 2011;40.
    Fossil fuels (petroleum, natural gas and coal) are the main resources for generating electricity. However, they have been major contributors to environmental problems. One potential alternative to explore is the use of microbial fuel cells (MFCs), which generate electricity using microorganisms. MFCs uses catalytic reactions activated by microorganisms to convert energy preserved in the chemical bonds between organic molecules into electrical energy. MFC has the ability to generate electricity during the wastewater treatment process while simultaneously treating the pollutants. This study investigated the potential of using different types of mixed cultures (raw sewage, mixed liquor from the aeration tank & return waste activated sludge) from an activated sludge treatment plant in MFCs for electricity generation and pollutant removals (COD & total kjeldahl nitrogen, TKN). The MFC in this study was designed as a dual-chambered system, in which the chambers were separated by a NafionTM membrane using a mixed culture of wastewater as a biocatalyst. The maximum power density generated using activated sludge was 9.053 mW/cm2, with 26.8% COD removal and 40% TKN removal. It is demonstrated that MFC offers great potential to optimize power generation using mixed cultures of wastewater.
    Matched MeSH terms: Biological Oxygen Demand Analysis
  10. Flame retardancy and mechanical properties of kenaf filled polypropylene (PP) containing ammonium polyphosphate (APP)
    Atikah Ismail, Azman Hassan, Aznizam Abu Bakar, Jawaid M
    Sains Malaysiana, 2013;42:429-434.
    The effects of ammonium polyphosphate (APP) as flame retardant and kenaf as fillers on flammability, thermal and mechanical properties of polypropylene (PP) composites were determined. Test specimens were prepared by using a corotating twin screw extruder for the compounding process followed by injection molding. The flame retardancy of the composites was determined by using limiting oxygen index (LOI) test. Addition of flame retardant into kenaf-PP composites significantly increased the LOI values that indicated the improvement of flame retardancy. Thermogravimetric analysis was done to examine the thermal stability of the composites. The addition of kenaf fiber in PP composites decreased the thermal stability significantly but the influence of APP on thermal properties of the kenaf-filled PP composites was not significant. The flexural strength and modulus of the composites increased with the addition of APP into kenaf filled
    PP composite. The addition of APP into kenaf filled PP causes increase in the impact strength while increasing the APP content in the kenaf filled PP composite show decrease in impact strength.
    Matched MeSH terms: Oxygen
  11. Fulltext Shape-dependent antibacterial activity against escherichia coli of zinc oxide nanoparticles
    Nor Hazliana Harun, Mydin, Rabiatul Basria S.M.N., Sreekantan, Srimala, Khairul Arifah Saharudin, Norfatehah Basiron, Fakrul Radhi, et al.
    Journal of Biomedical and Clinical Sciences, 2018;3(2):35-38.
    MyJurnal
    Zinc oxide (ZnO) nanoparticles (NPs) has become as promising candidate for antibacterial agents against Escherichia coli (E.coli), commensal hospital- acquired infections (HAIs). This study investigates the antibacterial action of ZnO NPs in three difference shapes; nanorod, nanoflakes and nanospheres against E.coli ATCC 25922. The antibacterial activity of ZnO NPs was determine through two standard protocols known as Clinical Laboratory Standards Institute (CLSI) MO2-A11 under light conditions of 5.70 w/m2 and American standard test method (ASTM) E-2149. Preliminary screening shows ZnO NPs did not inhibit the growth of E.coli. Further analysis using ASTM E-2149 in dynamic conditions revealed antibacterial activity after 3 hours with 100% reduction for ZnO NPs nanoflakes and 6 hours with 94.63% reduction for ZnO nanospheres, respectively. It demonstrated the ZnO NPs in nanoflakes and nanospheres exerted higher antibacterial activity possibly through release of ios, free radicals, ROS generation and electrostatic collision which contribute to bacterial death. Further analysis is needed to investigate biocompatibility of these samples for future biomedical applications.
    Matched MeSH terms: Reactive Oxygen Species
  12. Fulltext Anomalous metal segregation in lithium-rich material provides design rules for stable cathode in lithium-ion battery
    Lin R, Hu E, Liu M, Wang Y, Cheng H, Wu J, et al.
    Nat Commun, 2019 04 09;10(1):1650.
    PMID: 30967531 DOI: 10.1038/s41467-019-09248-0
    Despite the importance of studying the instability of delithiated cathode materials, it remains difficult to underpin the degradation mechanism of lithium-rich cathode materials due to the complication of combined chemical and structural evolutions. Herein, we use state-of-the-art electron microscopy tools, in conjunction with synchrotron X-ray techniques and first-principle calculations to study a 4d-element-containing compound, Li2Ru0.5Mn0.5O3. We find surprisingly, after cycling, ruthenium segregates out as metallic nanoclusters on the reconstructed surface. Our calculations show that the unexpected ruthenium metal segregation is due to its thermodynamic insolubility in the oxygen deprived surface. This insolubility can disrupt the reconstructed surface, which explains the formation of a porous structure in this material. This work reveals the importance of studying the thermodynamic stability of the reconstructed film on the cathode materials and offers a theoretical guidance for choosing manganese substituting elements in lithium-rich as well as stoichiometric layer-layer compounds for stabilizing the cathode surface.
    Matched MeSH terms: Oxygen
  13. One-pot green synthesis of highly reduced graphene oxide decorated with silver nanoparticles
    Nur Suhaili Abd Aziz, Muhammad Khairullah Nor Azmi, Abdul Manaf Hashim
    Sains Malaysiana, 2017;46:1083-1088.
    A one-pot green sonochemical process assisted by ascorbic acid as the reducing agent to produce highly reduced graphene oxide (rGO) decorated with silver nanoparticles (AgNPs) is demonstrated. A complete removal of oxygen-containing group in the GO sheets was confirmed by no observation of the peak corresponds to C-O, C=O and -OH bond. The unexpected decrease of peak intensity corresponds to sp2 hybridized C=C group is explained by a so-called bond polarity effect. The peak observed at ~400 nm seems to show the presence of AgNPs and the red shifting of C=C peak to ~270 nm after the introduction of ascorbic acid indicates the formation of highly reduced GO. The increase of AgNPs size and the crumpled silk-like morphology after the introduction of ascorbic acid also indicate the aggressive reduction of both AgNPs and GO. The increase of ID/IG ratio after the introduction of ascorbic acid seems to indicate the increase of the number of small sp2 domains, the presence of unrepaired defects and the restoration of the sp2 network. This work provides the promising green sonochemical approach by utilizing non-toxic and environmental-friendly reducing agent to produce highly reduced GO decorated with AgNPs for various applications.
    Matched MeSH terms: Oxygen
  14. Influence of air supply velocity on temperature field in the self heating process of coa
    Shuanglin Song, Shugang Wang, Yuntao Liang, Xiaochen Li, Qi Lin
    Sains Malaysiana, 2017;46:2143-2148.
    The air supply velocity is an important factor affecting the spontaneous combustion of coal. The appropriate air velocity can not only provide the oxygen required for the oxidation reaction, but maintains the good heat storage environment. Therefore, it is necessary to study the influence of the actual air velocity in the pore space on the self-heating process of coal particles. This paper focuses on studying the real space piled up by spherical particles. CFD simulation software is used to establish the numerical model from pore scale. Good fitness of the simulation results with the existing results verifies the feasibility of the calculation method. Later, the calculation conditions are changed to calculate and analyze the velocity field and the temperature field for self-heating of some particles (the surface of the particles is at a certain temperature) and expound the effect of different air supply velocities on gathering and dissipating the heat.
    Matched MeSH terms: Oxygen
  15. An evaluation of fermentation period and discs rotation speed of rotary discs reactor for bacterial cellulose production
    Khairul Azly Zahan, Norhayati Pa’e, Ida Idayu Muhamad
    Sains Malaysiana, 2016;45:393-400.
    Acetobacter xylinum strains are known as efficient producers of cellulose. A. xylinum is an obligate aerobic bacterium that has an oxygen-based metabolism. The dissolved oxygen (DO) concentration in a rotary discs reactor (RDR) is one of the most important factors that need to be observed during the cellulose synthesis by these bacteria. In this study, the effects of different discs rotation speed (5, 7, 9 and 12 rpm) and fermentation period (3, 4, 5 and 6 days) on the DO concentration and production of bacterial cellulose in a 10-L RDR were examined. The highest yield was obtained at 7 rpm with a total dried weight of 28.3 g for 4 days fermentation. The results showed that the DO concentration in the 10-L RDR increased in the range of 13 to 17% with increasing of discs rotation speed from 7 to 12 rpm. However, fermentation with high discs rotation speed at 12 rpm reduced the bacterial cellulose production. Analysis of data using Statistica 8.0 showed a high coefficient of determination value (R2 = 0.92). In conclusion, discs rotation speed gave more significant effect on the DO concentration and production of bacterial cellulose in 10-L RDR compared to fermentation period. This was further combined with synergistic effect from sufficient consumption of oxygen for the enhanced production of bacterial cellulose and providing the controlled environment for encouraging bacterial growth throughout the fermentation process.
    Matched MeSH terms: Oxygen
  16. How rice (Oryza sativa L.), a semi-aquatic plant adapt to natural flood or submerged condition? A physiological perspective
    Upadhya RK
    Sains Malaysiana, 2016;45:879-882.
    he deficiency of oxygen in water during submergence is one of the frequently perceived environmental factors that limits
    or hampers production of the rice cultivation. Rice plants comprise of elongated submerged tissues that help to bear with
    the rise of water level in natural location. This characteristic helps the plant to deal with flooding stress. The mechanism
    on flooding tolerance and adaptation mostly includes the physiological changes, one of which is the shortened growth
    of elongation towards keeping the carbohydrates and energy for production of the antioxidant regulations in rice plants.
    Furthermore, molecular studies and gene cloning might help suggest a better understanding of means and adaptations
    built-up by rice plants in order to stay alive and to remain active during flooding stress, might help to focus on some
    novel approaches to the up gradation as well as improvement on the natural cultivation of rice plants.
    Matched MeSH terms: Oxygen
  17. Hydrological change effects on sungai langat water quality
    Marina Zainal Abidin, Ahmad Abas Kutty, Tukimat Lihan, Nurul Akhma Zakaria
    Sains Malaysiana, 2018;47:1401-1411.
    This study attempts to assess the impact of various types of land use along Sungai Langat and describes hydrological
    change and water quality variation along this river. This study also determines water quality of Sungai Langat based on
    low flow dry period Q100,7 using the application of QUAL2K. Dissolved oxygen (DO), pH, temperature and conductivity
    were measured in situ. Biochemical oxygen demand (BOD5
    ), ammonia nitrogen (NH3
    -N) and total suspended solid (TSS)
    were analysed according to the standard methods (APHA). Water quality data was referred to National Water Quality
    Standards for Malaysia (NWQS) proposed by Malaysian Department of Environment (DOE) to estimate Sungai Langat
    water quality status. Four important water quality parameters namely DO, BOD5, NH3
    -N and TSS were simulated with
    QUAL2K version 2.07 for 83.67 km. As regard to individual parameter, DO classified this river into class III, BOD5 in
    Class II, NH3
    -N in Class IV and TSS in Class I. Based on QUAL2K simulation for low flow scenario, the results clearly
    demonstrates a gradually reduction of DO and BOD5 whereas NH3
    -N and TSS display opposite. Only NH3
    -N was found
    significantly increase which cause low water quality class towards the downstream. Three parameters namely DO, BOD5
    and NH3
    -N show effects of industrial which approximately located at the middle of river stretch. The TSS was contributed
    to the river system at the upstream and downstream of the river stretch which most likely from sand mining activity which
    located at Sungai Long, Cheras (near R5) and Sungai Semenyih (R11).
    Matched MeSH terms: Oxygen
  18. Fulltext Ultraviolet A and Ultraviolet C Light-Induced Reduction of Surface Hydrocarbons on Titanium Implants
    Naauman Z, Rajion ZAB, Maliha S, Hariy P, Muhammad QS, Noor HAR
    Eur J Dent, 2019 Feb;13(1):114-118.
    PMID: 31170762 DOI: 10.1055/s-0039-1688741
    OBJECTIVE: The carbon, titanium, and oxygen levels on titanium implant surfaces with or without ultraviolet (UV) pretreatment were evaluated at different wavelengths through X-ray photoelectron spectroscopy (XPS).

    MATERIALS AND METHODS: This interventional experimental study was conducted on nine Dio UFII implants with hybrid sandblasted and acid-etched (SLA) surface treatments, divided equally into three groups. Control group A samples were not given UV irradiation, while groups B and C samples were given UVA (382 nm, 25 mWcm2) and UVC (260 nm, 15 mWcm2) irradiation, respectively. The atomic ratio of carbon, titanium, and oxygen was compared through XPS.

    RESULTS: Mean carbon-to-titanium ratio and C1 peaks considerably increased in Group A compared to those in experimental Groups B and C. The intensity of Ti2p and O1s peaks was more pronounced for group C compared to that for groups A and B.

    CONCLUSIONS: Although the decrease in surface hydrocarbons was the same in both UV-treated groups, the peak intensity of oxygen increased in the UVC-treated group. Thus, it can be concluded that compared with UVA irradiation, UVC irradiation has the potential to induce more hydrophilicity on SLA-coated implants.

    Matched MeSH terms: Oxygen
  19. Targeted Surface Doping with Reversible Local Environment Improves Oxygen Stability at the Electrochemical Interfaces of Nickel-Rich Cathode Materials
    Steiner JD, Cheng H, Walsh J, Zhang Y, Zydlewski B, Mu L, et al.
    ACS Appl Mater Interfaces, 2019 Oct 16;11(41):37885-37891.
    PMID: 31589393 DOI: 10.1021/acsami.9b14729
    Elemental doping represents a prominent strategy to improve interfacial chemistry in battery materials. Manipulating the dopant spatial distribution and understanding the dynamic evolution of the dopants at the atomic scale can inform better design of the doping chemistry for batteries. In this work, we create a targeted hierarchical distribution of Ti4+, a popular doping element for oxide cathode materials, in LiNi0.8Mn0.1Co0.1O2 primary particles. We apply multiscale synchrotron/electron spectroscopy and imaging techniques as well as theoretical calculations to investigate the dynamic evolution of the doping chemical environment. The Ti4+ dopant is fully incorporated into the TMO6 octahedral coordination and is targeted to be enriched at the surface. Ti4+ in the TMO6 octahedral coordination increases the TM-O bond length and reduces the covalency between (Ni, Mn, Co) and O. The excellent reversibility of Ti4+ chemical environment gives rise to superior oxygen reversibility at the cathode-electrolyte interphase and in the bulk particles, leading to improved stability in capacity, energy, and voltage. Our work directly probes the chemical environment of doping elements and helps rationalize the doping strategy for high-voltage layered cathodes.
    Matched MeSH terms: Oxygen
  20. Raw landfill leachate treatment using an electrocoagulation process with a novel rotating electrode reactor
    Naje AS, Ajeel MA, Ali IM, Al-Zubaidi HAM, Alaba PA
    Water Sci Technol, 2019 Aug;80(3):458-465.
    PMID: 31596257 DOI: 10.2166/wst.2019.289
    In this work, landfill leachate treatment by electrocoagulation process with a novel rotating anode reactor was studied. The influence of rotating anode speed on the removal efficiency of chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS) of raw landfill leachate was investigated. The influence of operating parameters like leachate pH, leachate temperature, current, and inter-distance between the cathode rings and anode impellers on the electrocoagulation performance were also investigated. The results revealed the optimum rotating speed is 150 rpm and increasing the rotating speed above this value led to reducing process performance. The leachate electrocoagulation treatment process favors the neutral medium and the treatment performance increases with increasing current intensity. Furthermore, the electrocoagulation treatment performance improves with increasing leachate temperature. However, the performance reduces with increasing inter-electrode distance.
    Matched MeSH terms: Biological Oxygen Demand Analysis
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links