The title mol-ecule, C(11)H(11)NO(3), lies on a crystallographic mirror plane which bis-ects the plane of the phthalimide unit and contains the C and O atoms of the 2-methoxy-ethyl group.
This finite element analysis is aimed at comparing relative stiffness of three different posterior instrumentation constructs: the Hospital Universiti Kebangsaan Malaysia Spinal Instrumentation System (HUKM-SIS), the Cotrell-Dubousset Instrumentation (CDI) and Harrington Instrumentation System (HIS), used in the treatment of adolescent idiopathic scoliosis (AIS). The constructs were tested under various loads using MSC Patran 2001 r2a. Under increasing flexion loads, there was a linearly corresponding increase in deflection magnitudes for all constructs on the load-deflection curve. The CDI was the stiffest construct under axial, forward flexion and extension loads, followed by the HUKM-SIS and HIS. Under lateral bending loads, the HUKM-SIS construct was the stiffest followed by CDI and HIS. The HUKM-SIS construct was stiffer than HIS under torsional loads. We conclude that multiple pedicle screws increase the stiffness of posterior instrumentation constructs under all loads and inter-segmental spinous processes wiring increase the stiffness against lateral bending.
BACKGROUND: Occupational exposure to various neurotoxic chemicals has been shown to be associated with colour vision impairment. It seems that this can occur at low exposure levels, sometimes well below the recommended occupational threshold limits. This study was undertaken to determine the effect of exposure to petroleum derivatives (polyethylene, polystyrene) and solvents (perchloroethylene) on colour perception.
METHODS: Colour vision was assessed using the Ishihara plates, the D-15 test and the Farnsworth Munsell 100 Hue test. Two factories using petroleum derivatives and three dry cleaning premises were chosen at random. A total of 93 apparently healthy employees were recruited from the five workplaces. Two age-matched control groups comprising 56 people, who were support staff of the university with no exposure to petroleum, solvents or their derivatives, were also recruited.
RESULTS: All subjects passed the Ishihara test, showing that none had a congenital red-green defect. Some of the exposed employees failed the D-15 and had abnormally high FM100 Hue scores. All control subjects passed all the colour vision tests. The D-15 test showed that 28 per cent (26 of 93) of exposed employees had a colour vision defect whereas the FM 100 Hue test found that 63 per cent (59 of 93) had a colour vision defect. Most defects were of the blue-yellow type (22.6 per cent) when using the D-15 test. However, with the FM 100 Hue test, most defects were of the non-polar type with no specific axis (50.5 per cent). Mean total error scores calculated from the FM100 Hue test for exposed employees were statistically significantly higher than those of the control subjects.
CONCLUSION: Employees directly exposed to petroleum derivatives and solvents have a higher risk of acquiring colour vision defects compared to subjects who are not.
Study sites: Factories; the control subjects were tested at the Optometry Clinic in Universiti Kebangsaan Malaysia, Kuala Lumpur, Malaysia.
The apparent second-order rate constant (k OH) for hydroxide-ion-catalyzed conversion of 1 to N-(2'-methoxyphenyl)phthalamate (4) is approximately 10(3)-fold larger than k OH for alkaline hydrolysis of N-morpholinobenzamide (2). These results are explained in terms of the reaction scheme 1 --> k(1obs) 3 --> k(2obs) 4 where 3 represents N-(2'-methoxyphenyl)phthalimide and the values of k(2obs)/k(1obs) vary from 6.0 x 10(2) to 17 x 10(2) within [NaOH] range of 5.0 x 10(-3) to 2.0 M. Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of 1 decrease from 21.7 x 10(-3) to 15.6 x 10(-3) s(-1) with an increase in ionic strength (by NaCl) from 0.5 to 2.5 M at 0.5 M NaOH and 35 degrees C. The values of k obs, obtained for alkaline hydrolysis of 2 within [NaOH] range 1.0 x 10(-2) to 2.0 M at 35 degrees C, follow the relationship k(obs) = kOH[HO(-)] + kOH'[HO (-)] (2) with least-squares calculated values of kOH and kOH' as (6.38 +/- 0.15) x 10(-5) and (4.59 +/- 0.09) x 10(-5) M (-2) s(-1), respectively. A few kinetic runs for aqueous cleavage of 1, N'-morpholino-N-(2'-methoxyphenyl)-5-nitrophthalamide (5) and N'-morpholino-N-(2'-methoxyphenyl)-4-nitrophthalamide (6) at 35 degrees C and 0.05 M NaOH as well as 0.05 M NaOD reveal the solvent deuterium kinetic isotope effect (= k(obs) (H 2) (O)/ k(obs) (D 2 ) (O)) as 1.6 for 1, 1.9 for 5, and 1.8 for 6. Product characterization study on the cleavage of 5, 6, and N-(2'-methoxyphenyl)-4-nitrophthalimide (7) at 0.5 M NaOD in D2O solvent shows the imide-intermediate mechanism as the exclusive mechanism.
A kinetic study on the aqueous cleavage of N-(2-methoxyphenyl)phthalimide (1) and N-(2-hydroxyphenyl)phthalimide (2), under the buffers of N-methylmorpholine, reveals the equilibrium presence of monocationic amide (Ctam) formed due to nucleophilic reactions of N-methylmorpholine with 1 and 2. Pseudo-first-order rate constants for the reactions of water and HO- with Ctam (formed through nucleophilic reaction of N-methylmorpholine with 1) are 4.60 x 10(-5) s-1 and 47.9 M-1 s-1, respectively. But the cleavage of Ctam, formed through nucleophilic reaction of N-methylmorpholine with 2, involves intramolecular general base (2'-O- group of Ctam)-assisted water attack at carbonyl carbon of cationic amide group of Ctam in or before the rate-determining step.
The rates of the hydrolyses of N-(o-hydroxyphenyl)phthalimide (1) and N-(o-methoxyphenyl)phthalimide (2), studied at different pH, show that the hydrolysis of 1 involves intramolecular general base (IGB) assistance where the o-O- group of ionized 1 acts as IGB and H2O as the reactant. The rate enhancement due to the IGB-assisted reaction of H2O with ionized 1 is>8x10(4)-fold. Pseudo-first-order rate constant for the reaction of water with 2 is approximately 2x10(3)-fold smaller than the first-order rate constant (0.10 s-1) for pH-independent hydrolysis of 1 within the pH range of 9.60-10.10. Second-order rate constants (kOH) for hydroxide ion-assisted hydrolysis of ionized 1 and 2 are 3.0 and 29.1 M-1 s-1, respectively. The solvent deuterium kinetic isotope effect (dKIE) on the rate of alkaline hydrolysis of 1 and 2 reveals that the respective values of kOH/kOD are 0.84 and 0.78, where kOD represents the second-order rate constant for DO--assisted cleavage of these imides (1 and 2). The value of kwH2O/kdD2O is 2.04, with kwH2O and kdD2O representing pseudo-first-order rate constants for the reactions of ionized 1 with H2O and D2O, respectively.
Apparent second-order rate constants (k(n)(app)) for the nucleophilic reaction of aniline (Ani) with phthalic anhydride (PAn) vary from 6.30 to 7.56 M(-1) s(-1) with the increase of temperature from 30 to 50 degrees C in pure glacial acetic acid (AcOH). However, the values of pseudo-first-order rate constants (k(s)) for the acetolysis of PAn in pure AcOH increase from 16.5 x 10(-4) to 10.7 x 10(-3) s(-1) with the increase of temperature from 30 to 50 degrees C. The values of k(n)(app) and k(s) vary from 5.84 to 7.56 M(-1) s(-1) and from 35.1 x 10(-4) to 12.4 x 10(-4) s(-1), respectively, with the increase of CH(3)CN content from 1% to 80% v/v in mixed AcOH solvents at 35 degrees C. The plot of k(s) versus CH(3)CN content shows a minimum (with 10(4) k(s) = 4.40 s(-1)) at 50% v/v CH(3)CN. Similarly, the variations of k(n)(app) and k(s) with the increasing content of tetrahydrofuran (THF) in mixed AcOH solvent reveal respective a maximum (with k(n)(app) = 17.5-15.6 M(-1) s(-1)) at 40-60% v/v THF and a minimum (with k(s) = approximately 0-1.2 x 10(-4) s (-1)) at 60-70% v/v THF. The respective values of DeltaH* and DeltaS* are 15.3 +/- 1.2 kcal mol(-1) and -20.1 +/- 3.8 cal K(-1) mol(-1) for k(s) and 1.1 +/- 0.5 kcal mol(-1) and -51.2 +/- 1.7 cal K(-1) mol(-1) for k(n)(app), while the values of k(n) (= k(n)(app)/f(b) with f(b) representing the fraction of free aniline base) are almost independent of temperature within the range 30-50 degrees C. A spectrophotometric approach has been described to determine f(b) in AcOH as well as mixed AcOH-CH(3)CN and AcOH-THF solvents. Thus, the observed data, obtained under different reaction conditions, have been explained quantitatively. An optimum reaction condition, within the domain of present reaction conditions, has been suggested for the maximum yield of the desired product, N-phenylphthalamic acid.
Various blend ratios of high-density polyethylene (HDPE) and ultra high molecular weight polyethylene (UHMWPE) were prepared with the objective of determining their suitability as biomaterials. In the unfilled state, a blend of 50/50 (HDPE/UHMWPE) ratio by weight was found to yield optimum properties in terms of processability and mechanical properties. Hydroxyapatite (HA) was compounded with the optimum blend ratio. The effects of HA loading, varied from 0 to 50wt% for both filled and unfilled blends were tested for mechanical properties. It was found that the inclusion of HA in the blend led to a remarkable improvement of mechanical properties compared to the unfilled blend. In order to improve the bonding between the polymer blend and the filler, the HA used was chemically treated with a coupling agent known as 3-(trimethoxysiyl) propyl methacrylate and the treated HA was mixed into the blend. The effect of mixing the blend with silane-treated HA also led to an overall improvement of mechanical properties.
Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of N-(2'-methoxyphenyl)phthalimide (1) decrease nonlinearly with increasing total concentration of nonionic surfactant C(m)E(n) (i.e. [C(m)E(n)](T) where m and n represent the respective number of methyl/methylene units in the tail and polyoxyethylene units in the headgroup of a surfactant molecule and m/n=16/20, 12/23 and 18/20) at constant 2% v/v CH(3)CN and 1.0 mM NaOH. The k(obs)vs. [C(m)E(n)](T) data follow the pseudophase micellar (PM) model at ≤ 50 mM C(16)E(20), ≤ 1.4 mM C(12)E(23) and ≤ 2.0 mM C(18)E(20) where rate of hydrolysis of 1 in micellar pseudophase could not be detected. The values of k(obs) fail to follow the PM model at > ∼50 mM C(16)E(20), > ∼1.4 mM C(12)E(23) and > ∼2.0 mM C(18)E(20) which has been attributed to a micellar structural transition from spherical to rodlike which in turn increases C(m)E(n) micellar binding constant (K(S)) of 1 with increasing values of [C(m)E(n)](T). Rheological measurements show the presence of spherical micelles at ≤ 50 mM C(16)E(20), ≤ 1.4 mM C(12)E(23) and ≤ 3.0 mM C(18)E(20). The presence of rodlike micelles is evident from rheological measurements at > ∼50 mM C(16)E(20), > ∼1.4 mM C(12)E(23) and > ∼3.0 mM C(18)E(20).
Children who would benefit from a haematopoietic stem cell transplantation often lacked a compatible sibling donor. Unrelated cord blood transplantation was offered as an alternative donor source for patients with a variety of malignant and non-malignant diseases who had no further treatment options. Cord blood units were sourced from various international cord blood registries. The median nucleated and CD34+ cell doses were 8.7 x 10(7)/kg and 2.6 x 10(5)/kg respectively. In spite of adequate cell doses, a high rate of non-engraftment of 32% was observed. Acute graft-versus-host disease (GVHD) occurred in 14 out of the 15 patients who engrafted with 53% being grade III to IV GVHD. The five year disease free survival was 40.7% with infection and GVHD being the commonest causes of death. The five year disease free survival was 20.5% and 60.7% for malignant and non-malignant diseases respectively.
In the title mol-ecule, C(24)H(20)N(2)O(4), the five-membered oxadiazole ring is nearly planar (r.m.s. deviation = 0.053 Å) and the phenyl ring of the biphenyl unit attached to it forms a dihedral angle of 73.2 (1)°; the other phenyl ring is close to coplanar with the oxadiazole ring [dihedral angle = 6.2 (2)°].
All non-H atoms of the title compound, C(6)H(7)N(3)OS, which exists in the thione form, lie in a common plane (r.m.s. of non-H atoms = 0.08 Å). The amino group of the -NH-NH(2) substituent forms an intra-molecular hydrogen bond to the S atom. The terminal -NH(2) group is pyramidally coordinated; it forms a weak N-H⋯O and a weak N-H⋯S hydrogen bond. Furthermore, the N atom is an acceptor for a C-H⋯N contact. The amino group of the ring is a hydrogen-bond donor to the carbonyl O atom of an adjacent mol-ecule, this inter-action giving rise to a linear chain motif running along the b axis.
In the title compound, C(30)H(36)N(2)O(2)S, the dihedral angle between the two aromatic rings of the biphenyl residue is 31.2 (1)°. The two methyl-ene C atoms subtend an angle of 99.9 (1)° at the S atom. In the crystal, mol-ecules form inversion dimers linked by pairs of N-H⋯O hydrogen bonds. The hydroxyl group is shielded by the tert-butyl residues and is therefore not involved in any hydrogen bonding.
The dianion of the title salt, 2C(5)H(6)N(+)·C(12)H(6)N(2)O(4)S(2) (2-), lies on a special position of 2 site symmetry that relates one thio-nicotinate part to the other, and the dihedral angle between the niotinate planes is 89.2 (2)°. The pyridinium cations are hydrogen bonded to the carboxyl-ate group by way of N-H⋯O links.
The title compound, C(25)H(34)N(2)O(3)S, is a derivative of N'-benzyl-ideneacetohydrazide having substituents on the acetyl and benzylidenyl parts, and displays a planar C(carbon-yl)-NH-NC(anis-yl) fragment [torsion angle = 174.9 (3)°]. The -NH- unit forms an N-H⋯O hydrogen bond with the carbonyl O atom of an inversion-related mol-ecule.
The complete mol-ecule of the title compound, C(26)H(20)N(2), is generated by crystallographic inversion symmetry. The terminal phenyl ring is twisted by 19.2 (1)° with respect to the adjacent phenyl-ene ring.
In the approximately planar title mol-ecule, C(14)H(10)BrClN(3)O(2), the dihedral angle between the aromatic ring planes is 5.79 (12)°. The conformation is stabilized by intra-molecular O-H⋯N and N-H⋯O hydrogen bonds and an inter-molecular O-H⋯O link leads to chains in the crystal propagating in [001].
Mol-ecules of the title compound, C(14)H(8)N(2)O(5), are linked by a hydr-oxy-amide O-H⋯O hydrogen bond into a linear chain. The hydr-oxy group is disordered over two positions of the benzene ring in an approximate 0.57:0.43 ratio.