Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. Mapinfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenygaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
The radiotracer injector is meant for transferring liquid radiotracer in the system for industrial radiotracer application with minimal radiation exposure to the operator. The motivation of its invention is coming from the experience of the workers who are very concern about the radiation safety while handling with the radioactive source. The idea ensuring the operation while handling the radioactive source is fast and safe without interrupting the efficiency and efficacy of the process. Thus, semi automated device assisting with pneumatic technology is applied for its invention.
Monodispersed and size-tunable nanocrystalline cobalt (Co) particles in the range of 100 to 400 nm are prepared by the reduction of Co(II) species in propylene glycol. Control of the particle size is achieved by varying the initial Co(II) species concentration and by the addition of nucleating agents. Smaller Co particles are produced with increasing amounts of Co(II) species and in the presence of nucleating agents. X-ray diffraction analysis (XRD) shows that the Co particles are predominantly face-centered cubic crystals of about 8-14 nm. The Co particles are also ferromagnetic at room temperature.
Concentrations of Natural Occurring Radioactive Material (NORM) and terrestrial gamma radiation have been shown to be associated with certain lithology and soil types. An attempt was made to statistically predict and validate environmental gamma radiation dose rates based on limited number of actual field measurements using sodium iodide (NaI(Tl)) detector. Statistical analysis including the correlations between the actual and predicted dose were made based on 32 different lithology and soil type combinations. Results of field measurements, have shown that more than 50% of the predicted data were not significantly different from the actual measured data. The interpolation method in GIS was used to produce an isodose map based on the prediction equation. A correlation of multiple regression on the predicted versus lithology and soils dose rates gave relationships of DP = 0.35 DL + 0.82 DS – 0.02, r2 = 0.736. A predicted isodose map was subsequently plotted base on 4 dose rates classes, ranging from 0.1 – 0.3 μSvhr-1.
In this study the intermetallic (IMC) thickness of Sn-Pb, Sn-Zn and Sn-Zn-Bi solders on copper (Cu) substrate were measured at different temperatures using reflow methods. Cu6Sn5 intermetallic phase was detected between Sn-Pb solder and Cu substrate. The J-Cu5Zn8 phase was detected between Sn-Zn and Sn-Zn-Bi lead-free solders with Cu substrate. The thickness of the intermetallics increases with temperature. The IMC thickness for Sn-8Zn-3Bi solder is lower than Sn-9Zn solder for all the soldering temperatures, indicating that Bi has suppressed the initial IMC formation.
A laboratory scale test rig to treat simulated flue gas using electron beam technology was installed at the Alurtron EB-Irradiation Center, MINT. The experiment test rig was proposed as a result of feasibility studies conducted jointly by IAEA, MINT and TNB Research in 1997. The test rig system consists of several components, among others, diesel generator sets, pipe ducts, spray cooler, ammonia dosage system, irradiation vessel, bag filter and gas analyzers. The installation was completed and commissioned in October 2001. Results from the commissioning test runs and subsequent experimental work showed that the efficiency of flue gas treatment is high. It was proven that electron beam technology might be applied in the treatment of air pollutants. This paper describes the design and work function of the individual major components as well as the full system function. Results from the initial experimental works are also presented.
The specimens used were CaCO3 (Sigma Aldrich, purity 99.9 %). We have 23 parameters and 20 iterations, including two theta zero error, scale factor, thermal effect, coefficients for polynomial describing the background; U, V, W and mixing parameters of the profile peak function, lattice constants, positional parameters and overall isotropic temperature factors. Most the samples show that the crystal structure are rhombohedral with lattice constants a = b = 4.981 Å, c = 17.044 Å and space group is R3C. The microstrain (K) and the particle size (V) of CaCO3 ceramic were calculated using 10 the full width at half maximum (FWHM) of diffraction peaks from (0 1 2), (1 0 4), (0 0 6), (1 1 0), (1 1 3), (2 0 2), (0 1 8), (1 1 6), (2 2 1 ), (1 2 2) crystal planes are 2.1 x 10-2 and
362 nm, respectively.
Ceramic of BaxSr1-xTiO3 (BST) for x =0.3; 0.5 and 0.7 were successfully deposited by solid solution method. The BST ceramic were analyzed by x-ray diffraction (XRD). The XRD spectra was recorded on a Philips type PW 3701 diffractometer using CuKD (Oco = 1.54056 Å) radiation at 30 KV and 30 mA (900 watt). The spectra shows that BST ceramic are polycrystalline with tetragonal structure. The lattice constants analysis of the grown ceramics was analyzed by visual basic program. Using Cohen’s and Cramer’s algorithms in visual basic program, , the lattice constants are a = b = 3.877 Å; c = 3.970 Å for Ba0.3Sr0.7TiO3 ceramic, a = b = 3.979 Å; c = 3.981 Å. for Ba0.5Sr0.5TiO3 ceramic and a = b = 3.965 Å; c = 4.005 Å for Ba0.7Sr0.3TiO3 ceramic, respectively. The reform value of the lattice constant of BST ceramic is possibly associated with the anti site defects of Ba and Sr.
Spatial and temporal variations in concentrations of several metals and isotopes in sediment cores from around Penang Island, an area with economically important biological resources off the northwest coast of peninsular Malaysia, are reported. Because of a typical, monazite rich mineralogy in surrounding drainage basins, sedimentary metal enrichment factors relative to global average materials, enrichment factors (EFs) of ˃1.0 do not always indicate significant anthropogenic metal inputs. Because of extensive metal solubilization in the hot, organic carbon rich area, EFs of < 1.0 may be observed for several metals despite significant anthropogenic contributions. Comparison of metal-Al relationships in Penang area surface sediments with those in nearby and presumed uncontaminated Strait of Malacca sediments more accurately correct for atypical regional solubilization and mineralogical effects than comparison to global average materials. Such comparisons show concentrations of Cd, Cu, Pb, Ni, Cr, As, Sb, Zn and V have changed by less than a factor of two by anthropogenic discharges. Sedimentary concentration profiles of Pb, Zn and Cu, ratioed to Sc to normalize for variations in grain size and mineralogy, have subsurface maxima suggestive of modest and recently reduced anthropogenic inputs. Mn, U, As and Sb have Sc-normalized concentration profiles clearly affected by diagenetic processes. Sc-normalized profiles of Cr, Th, Ce and Sm show only small changes with depth, confirming insignificant anthropogenic inputs and undetectable postdepositional diagenetic mobility.
Excess ²¹⁰Pb activities and fluxes in Penang area sediments are limited by supply of this radionuclide, in contrast to sediments of both the northwestern U.S.A. and Amazon continental shelves, where they are limited by particle scavenging reactions.²¹⁰Pb activities in sediments of
the shallow, dynamic Penang area often show erratic or unconvincing changes with depth that
cannot be reliably modeled by assuming steady state, constant deposition rate of particles of
uniform chemistry, mineralogy and initial unsupported ²¹⁰Pb, and that mixing is limited to a
recognizable surface layer and resemble a diffusive process.
Analyses activities of 226 Ra and 228 Ra were conducted at ten stations of Pulau Redang, Malaysia. Dissolved radium isotopes such as 226 Ra and 228 Ra had shown enrichment at coastal area stations. Meanwhile, activities of both nuclides in the suspended particle matters were slightly in equilibrium with the activity ratio ranging from 0.88 – 1.86. The calculated distribution coefficient values (Kd) of 226 Ra and 228 Ra were in the range of 0.78 x 10 5 L g -1 to 5.56 x 10 5 L g -1 and 0.21 x 10 5 L g -1 to 1.86 x 10 5 L g -1 , respectively, indicate that most of the radium nuclides in the study area are strongly absorbed into the particulate phases. Therefore, low concentrations of suspended particles matter in the water column (< 10 mg L -1 ) have insignificant effects on the Kd values.
Structural and dielectric properties of barium strontium, titanate (Ba(ÿ)SrxTiO$) ceramics with x—
0.25, 0.5 and 0.75 were investigated. The Ba(i-xjSrxTiOs ceramics were synthesised by solid state
reaction method. Microstructure, surface morphology and dielectric properties of the synthesised
ceramics were examined using XRD, SEM and Impedance Spectroscopy respectively. XRD results
revealed that all samples contained BaTiOg as primary phase with tetragonal perovskite crystal
structure. The crystallite size slightly increased with the increasing of Sr contents. SEM micrographs
showed that the microstructure become denser when Sr contents increased. Impedance spectroscopy
showed dielectric constant for all samples were decreased with increasing temperature up to 200°C.
The storage of oil sludge at refineries is a major problem to the petroleum industry. Oil sludge treatments such as by using sludge farming, incineration, physical and chemical techniques have been applied to separate the hydrocarbon from the solid sediment. The paper relates a characteristic study performed on solid sediment from a local oil sludge sample for making sintered brick. The study includes the used of XRD, XRF, digital microscopy and particle size analyzer. The result shows that the sample highly contains quartz minerals with particle size ranging from 0.5 – 200 ȝm. The chemical phosphorous from the surfactant can be removed by washing to make this solid sediment to be used as a material in the brick making.
Template-assisted growth is an important nanoelectrochemical deposition technique for synthesizing one-dimensional (1-D) nanostructures with uniformly well-controlled shapes and sizes. A good template with well-defined dimensions is imperative for realizing this task. Porous anodic alumina (PAA) has been a favorable candidate for this purpose as it can be tailor-made with precise pore geometries, such as pore length and diameter as well as inter-pore distances, via the anodisation of pure aluminium. This paper reports the fabrication of PAA templates and electrochemical synthesis of functional nanostructures in the form of nanowires using PAA templates as scaffolds. Axial heterostructured and homogeneous nanowires formed by engineering materials configuration via composition and/or layer thickness variations were fabricated for different functionalities. X-ray diffraction and imaging techniques were used to elucidate the microstructures, morphologies and chemical compositions of the nanowires produced. Due to their large surface area-to-volume ratios, and therefore high sensitivities, these functional nanostructures have useful applications as critical components in nanosensor devices and various areas of nanotechnology. Potential applications include as hydrogen gas sensors in nuclear power plant for monitoring structural integrity of reactor components and containment building, as well as environmental monitoring of air pollution and leakages of toxic gases and chemicals.
Thermoelectric nanostructures hold great promise for capturing and directly converting into electricity some vast amount of low-grade waste heats now being lost to the environment (e.g. from nuclear power plant, fossil fuel burning, automotives and household appliances). In this study, large-area vertically-aligned silicon nanowire (SiNW) arrays were synthesized in an aqueous solution containing AgN•i and HF on p-type Si (100) substrate by self-selective electroless etching process. The etching conditions were systematically varied in order to achieve different stages of nanowire formation. Diameters of the SiNWs obtained varied from approximately 50 to 200 nm and their lengths ranged from several to a few tens of um. Te/Bi2Tex.Si thermoelectric core-shell nanostructures were subsequently obtained via galvanic displacement of SiNWs in acidic HF electrolytes containing HTe02+ and 139' /HTe02+ ions. The reactions were basically a nano-electrochemical process due to the difference in redox potentials between the materials. The surface-modified SiNWs of core-shell structures had roughened surface morphologies and, therefore, higher surface-to-bulk ratios compared to unmodified SiNWs. They have potential applications in sensors, photovoltaic and thermoelectric nanodevices. Growth study on the SiNWs and core-shell nanostructures produced is presented using various microscopy, diffraction and probe-based techniques for microstructural, morphological and chemical characterizations.
This paper studies the use of gamma irradiation for textile waste water treatment. Prior to irradiation, the raw wastewa ter was diluted using tap water to targeted concentration of COD 400 mg/l. The sample was irradiated at selected dose between the ranges of 2kGy to 100kGy. The results showed that Irradiation was effective in removing the highly colored refractory organic pollutants. The COD removal at lowest dose, 2kGy is about 310 mg/l. Meanwhile, at highest dose, 1 00kGy the COD reduced to 100mg/l. The degree of removal influenced by the dose introduced during the treatment pro cess. As the dose increased, higher removal of organic pollutant was recorded. On the other hand, other properties of t he wastewater such as pH, turbidity, suspended solid, BOD and color shows tremendous changes as the dose increases. This shows the concentration of pollutants and dose of irradiation applied are directly proportional to each other.
Chemical composition of fine (PM2.5) aerosol samples collected for the 5 years period (2001- 2005) using Gent Stacked filter unit sampler at Klang Valley (3 o 10 ’ 30 ’’ N, 101 o 43 ’ 24 ’’ E) were analysed using Neutron Activation Analysis (NAA) and Proton Induced X-ray Emission (PIXE). Results of the study show that the major component of the fine aerosol was black carbon and sulfur with the mass concentration ranged from 4.4 - 6.7µg m -3 and 1.2 - 1.9µg m -3 , respectively. The total fine aerosol mass concentration were in the ranged of 25 - 31µg m -3 with the reconstructed mass was about 50% as relative to the gravimetric mass. Statistical method, factor analysis with varimax approach has been applied to the aerosol composition data for the fingerprint identification. The analysis produces five identified fingerprint represent soil, industry, motor vehicles/biomass burning and Pb and Zn sources. There is also an unidentified source that could be related to unknown industrial activities.
The paper relates a study on the development of an analysis procedure for measuring the gold coating thickness using EDXRF technique. Gold coating thickness was measured by relating the counts under the Au Lα peak its thickness value. In order to get a reasonably accurate result, a calibration graph was plotted using five gold-coated reference standards of different thicknesses. The calibration graph shows a straight line for thin coating measurement until 0.9μm. Beyond this the relationship was not linear and this may be resulted from the selfabsorption effect. Quantitative analysis was also performed on two different samples of goldcoated jewelry and a phone connector. Result from the phone connector analysis seems to agree with the manufacturer’s gold coating value. From the analysis of gold-coated jewelry it had been able to differentiate the two articles as gold wash and gold electroplated.
The effects of radiation on tissue have generally been investigated in the context of therapeutic
irradiations, radiation protection and exposure to solar radiation. Typically attention has
concentrated primarily on cells, less consideration being given to the extracellular matrix (ECM).
ECM consists of collagen and elastin fibers immersed in a viscoelastic gel composed principally of
hyaluronan (HA) and proteoglycans. The present study examines changes in the physical properties of
the principle matrix micromolecules due to exposure to ionizing radiation. Freeze-dried rooster-comb
HA (Sigma) were used to give doses of 10-100 Gy for HA, to cover the range of irradiation exposure
during radiotherapy. The viscosity of HA (at 1.25% and 0.125% w/v) was measured by both cone and
plate and capillary viscometry, the former providing measurement at uniform shear rate and the latter
providing a more sensitive indication of changes. The Raman microspectrometry was employed to
characterize these changes on ECM molecular conformation. In regard to the viscometry, both
techniques (cone and plate and capillary viscometry) reveal a dose-dependent reduction in viscosity
(from 340 ± 194 cP for controls to 1500 ± 88 cP at a shear rate of 2 s-1 and dose of 75 Gy), again
suggesting depolymerisation.
The extracellular matrix (ECM) is a complex structural entity surrounding and supporting cells that
are found within mammalian tissue. This study presents the effect of ionizing radiation on the physical
properties of elastin which is usually found within arteries, lung, skin, ligantum nuchae, vocal chords
and elastic cartilage as a function of their composition and organization or architecture. X-ray from
an electron linac were used to give doses of 10-50Gy to cover the range of irradiation exposure during
radiotherapy. A uniaxial mechanical testing protocol was used to characterize the fibrous protein. For
pericardial the major change was an increase in the elastic modulus in the toe region of the curve (≤
20% strain), from 23±18 kPa for controls to 57±22 kPa at a dose of 10 Gy (p=0.01, α=0.05). At a
larger strain (≤ 20%), the elastic modulus in the region decreased from 1.92±0.70 MPa for control
pericardium tissue to 1.31±0.56 MPa (p=0.01, α=0.05) for 10 Gy X-irradiated sample. For elastin,
the stress-strain relationship was linear up to 30% strain, but the elastic modulus decreased
significantly with irradiation (controls 626±65 kPa, irradiated 474±121 kPa (p=0.02, α=0.05). The
results suggest that for elastin chain scissions are the primary effect of irradiation. The Raman
microspectrometry was employed to characterize these changes on ECM conformation.