Transport of fuel is essential to ensure supplies are delivered as per requested by the industrial sites or other demands. Numerous accidents have been reported and recorded in which loss of containment of hazardous chemicals occurred and led to disastrous outcomes. This paper presents the analysis of Boiling Liquid Expanding Vapour Explosion (BLEVE) due to loss of containment for Liquefied Petroleum Gas (LPG) road tankers. The main objective of this paper is to evaluate the potential consequences resulting from overpressure blast and thermal radiation of tankers carrying LPG to the people and the surrounding. The aim is also to compare the outcomes obtained from PHAST software simulator 8.11 with that of established mathematical model. Malaysia North-south Expressway (NSE) was selected as the location of the incident. The volume, weather parameters and properties of LPG were identified. It was found that the effect of BLEVE on people and structures was catastrophic. The results obtained from the mathematical model were similar with that modelled using PHAST software simulator.
The occurrences of occupational accidents and incidents are increasing in parallel with the growth of industries
such as mining and quarrying. The main objective of this study was to analyze data on the perception of occupational
accidents in the mining and quarrying sector in Malaysia. The data was collected and examined based on the
questionnaires on the level of perception of accident investigation in mining and quarrying sector. Statistical data
reported by the Department of Occupational Safety and Health (DOSH) was also reviewed. The findings of this study
prove that the level of perception of workers towards occupational accident issues in mining and quarrying sector
is still in the moderate level with the mean value of 3.28. The findings show that 51.7% of the workers agree while
25.9% totally agree to the accident occurrence. Only 1.7% of the workers are not aware of accident occurrence at the
workplace. Employers and employees must carry out their responsibilities to prevent accidents by adhering to health
and safety practices at the workplace.
This paper is focusing on developing theoretical model on the effects of psychosocial and physical safety climate
towards workers task performance. Psychosocial and physical safety climate can be defined as workers’ perception
on organizational policies, process, and procedures outline, specifically on psychosocial issues and physical safety
aspect. This paper is based on sociotechnical philosophy by highlighting the integration of both psychosocial and
physical safety climate in predicting task performance. According to the philosophy, workers working performance is
dependent on both social and technical context in environment to accomplish the task and will influence both physical
products and psychosocial outcomes. Thus, it is essential to investigate the integration of psychosocial and physical
safety climate in predicting performance outcome.
Indoor air quality (IAQ) can be described as the quality of air weather inside or surrounding the buildings and structures
which are associated with the health and comfort ability of occupants in the buildings. The level of IAQ in buildings can be influenced
by microbial contaminants activities, chemicals exposure and allergens that seriously can create health effects to the building’s
occupants. In the present study, the effect of environmental factors such as temperature and relative humidity on the optimum growth
of Aspergillus niger (A. niger) was investigated. The study revealed that the optimal fungal growth of up 43mm in diameter was
evidenced under room temperature of 30oC at the end of a five day incubation period. However, the relative humidity from 40% to 90%
applied is able to support the growth of the A.niger. The relative humidity of 90% shows the optimal effect where 56 mm of diameter
growth happened after 5 days of incubation. The significant finding to emerge from this study is that environmental factors such as
temperature and relative humidity do affect the growth of A.niger. The optimal temperature and relative humidity for A.niger to grow
are 30oC and 90%, respectively.
The light train (LRT) is one of the important public transportation modes in the congested city of Kuala Lumpur. Train drivers drive the trains within their shift time on similar routes every day. This job activity may lead to stress. Physical fatigue is one of the health problems commonly experienced by the train drivers. There were three methods applied in this study, namely, Nordic Questionnaire, NASA-TLX and observations. There were a total of 52 respondents, consisting of the train drivers from Rapid Rail Sdn Bhd, a subsidiary company of Prasarana Malaysia Berhad. The questionnaires were analyzed using Statistical Software for the Social Science (SPSS) with a suitable statistical analysis. It was found that, the train drivers experienced pain on their necks, shoulders and lower backs. The main causes of physical fatigue that affect the performance of a train driver are sleep disorder and uncomfortable seating. Moreover, other effects of physical fatigue also prevent the drivers from carrying out activities at home. The industry has improved the drivers’ workstations such as their seats to reduce the rate of physical fatigue. However, more improvements are expected to be done.
The main purpose of this study was to establish the comfort zone for bus drivers in a seated position. In addition, this study is to investigate the seated pressure distribution among Malaysian bus drivers. The study consists of 10 bus drivers randomly selected to be a part of this study. The FSA pressure mat was utilized in order to investigate the force distribution of buttock to the seat pan of the drivers’ seat. This device is placed on the driver seat and backrest. Later, the subject would sit on for several minute. The finding reveals that most of the bus drivers feel discomfort by having low back pain and musculoskeletal disorder. The seat pressure distribution of Malaysian busses indicated that the seat not able to absorb high pressure generated from buttock that later may cause the discomfort and restricted the performance of drivers.
Stress reduces the performance and productivity of employees.
One of the most important stressors originate from organizational factors,
which are decision latitude, psychological demand, social support and job
insecurity. This creates four kinds of jobs: passive, active, low strain and high
strain. The objective of the study is to determine the association between
organizational factors with occupational stress and cortisol level among
lecturers in University Selangor. This cross-sectional study used a purposive
sampling, which involved 45 lecturers from various faculties. The instrument
used in this study was Job Content Questionnaire (JCQ) which is a
Psychosocial Job Assessment Instrument designed by Karasek et al., (1998).
The questionnaire has been translated to Malay version by Edimansyah et al.,
(2006). 10ml of blood sample was collected from each respondent by certified
phlebotomist. Results from the statistical analysis showed that majority of the
respondents were female (75.6%), aged below forty years old (82.2%), married
(77.8%) and hold a master degree (68.9%). Most of the respondents were
found having low decision latitude 35(77.5%). Majority of the respondents
were also found in passive group 13(28.9%) which were having low
psychological job demand and low decision latitude, while others are in low
strain 11(24.4%), high strain 11(24.4%) and active group 10(22.2%)
respectively. There was a significant association between two organizational
factors with occupational stress level, which are decision latitude and
psychological job demand (p0.05). As a
conclusion, two out of four organizational factors, which are decision latitude
and psychological job demand showed a significant association with
occupational stress levels. Cortisol as one of stress biomarkers may not be
significant due to small sample size.
The main objective of this study is to determine the association between respirable hexavalent chromium compounds with urinary β2-microglobulin levels among welders in an automotive components manufacturing plant. 49 welders and 39 workers involved in stamping process were selected as the exposed and the comparative group. β2-microglobulin is a protein renal tubular dysfunction marker that can indicate renal dysfunction caused by heavy metal. Air samples of worker’s breathing zone were collected using personal air sampling pump and filter papers. Filter papers were then diluted and analysed with Atomic Absorption Spectrophotometry (AAS). Workers’ urine samples were collected at the end of 8-hour work shift and analysed with β2-microglobulin ELISA Kit (IBL-Hamburg) and a microtiter reader. Meanwhile, creatinine levels were analysed with creatinine test strips and Reflotron®. A mean concentration of respirable hexavalent chromium compounds in air for the exposed group was 0.135 ± 0.043μg/m3 while for the non-exposed group was 0.124 ± 0.029μg/m3. The mean level of urinary β2-microglobulin per creatinine for the exposed group was 84.996 ± 39.246μg/g while that of the comparative group was 61.365 ± 21.609μg/g. The concentrations of respirable hexavalent chromium compounds were higher in the exposed group compared to the comparative group (Z=-2.444, p=0.015). β2-microglobulin level was also higher in the exposed group compared to the non-exposed group (t=3.821, p=
This study aims to determine the awareness level of safety
management and safety behavior among SMEs workers. Safety management as a
subsystem in the overall management of the organization. It is designed to control
hazards that can affect the safety and health of workers. Small and Medium Enterprise
(SMEs) in Malaysia continue to face many challenges both traditionally and new.
80% to 90% of occupational accidents occurred involving worker of SMEs industry.
A self-administered questionnaire was distributed to the involved small medium
industries. Questionnaires form that consist of three sections, namely socio
demographic, safety management and safety behavior. This study was conducted at
selected SMEs located in Klang Valley. 226 workers responded. In order to interpret
the level of awareness among the respondents, a 3-level scale (High: 3.68 – 5.00,
Moderate: 2.34 – 3.67, Low: 1.00 – 2.33) based on the mean score was used suggested
by Ashari & Mahmood. The findings show that the highest level of awareness was
safety behavior while the lowest awareness level was safety promotion policy
respectively. Findings also showed that, there were moderate correlation between
safety management and safety behavior. Understanding the concept of the OSH
management system will help us to understand the application of OSH management
system in Malaysia. OSH Management very important to prevent accident, ill health
& injury at workplace towards development of safety culture.
This study was done to investigate the background level on microbiological indoor air pollutants in new constructed 8 stories buildings (2 level of Hostel facilities, 3 level of Training Room level, 2 level of Offices and 1 Exhibition Halls and Rooms) in Bandar Baru Bangi, Selangor. The offices and exhibition hall are carpeted furnished. All these spaces were using centralized air conditioning system. Airborne microbes’ concentrations were determined by using a single stage impactor (Biosampler) as per requirement of National Institute of Occupational Safety and Health NIOSH method NIOSH Manual Analytical Method MAM 0800. Mean concentration of total bacteria detected is 1351 CFU/m3 and it was found significantly higher compared to maximum exposure limit 500 CFU/m3 in office room. The mean concentration of total fungi in the office rooms is 479 CFU/m3 and it was found slightly lower compared to maximum exposure limit 500 CFU/m3. The airborne microbe levels were found slightly lower in the accommodation, training and exhibition rooms compared to office room. These findings indicate that although a new constructed building should be having a significant background level of airborne microbe (total bacteria and total fungi).
Unsafe behaviour is the key factor which contributes to the high number of incidents. Applying Behavior-Based
Safety (BBS) into safety risk controls has been adopted in major industry toward improving safety performance.
This approach to prevent incident has a number of advantages. The objective of this study is to identify the BBS
factors which can contribute to reduce incidents at the workplace. Human factors, behaviour and environment have
been identified as BBS factors. Human factors are influenced by knowledge and understanding of the workers while
behaviour factors are influenced by culture and practices in a daily life. In addition, environmental factor involves
equipment and work area. For an effective BBS approach, level of knowledge, understanding and practices by the
workers become the main concerns in the implementation of BBS. The findings can become the reference model for
future implementation in other organizations and as a guidance for better safety management.
Pesticides are commonly used for pest control in oil palm
plantations. The knowledge, attitude and practices (KAP) while handling pesticides
may potentially result in adverse health effects among the estate workers. The aim of
this study is to determine the KAP of pesticides used and the capacity of selfreporting
health conditions among workers in palm oil plantations. A crosssectional
study was conducted to investigate the KAP and its self-reporting health
symptoms by using questionnaires and face-to-face interviews to 120 male estate
workers who use pesticides in their daily work routine in the oil palm plantation. At
least 85.8% of respondents had a good knowledge of pesticide used, 46.7% of them
indicated neutral level of attitude on the pesticides’ usage, and 68.3% of them
demonstrated a good practice while handling mixture of pesticides. Overall, there is
a significant association between the practices of pesticide usage with the selfreporting
health symptoms, such as dizziness, excessive vision, cough,
nausea/vomiting, redness of skin, difficulty in breathing, skin rashes, blurred vision,
excessive sweating and hand tremor. More than half of the estate workers indicated
a moderate to good knowledge, attitude and practices level of pesticide handling in
oil palm plantations. This study suggests that the self-reporting symptoms are real
and not over-reporting by workers. The increase in KAP of pesticides usage among
these workers have highlighted the necessity to improve the traditional field training
method of safe handling of pesticide to a sustainable field practical-based learning.
The latter training approach is to engage theory into practice.
Introductions: Call center has been defined as a working environment in which uses telephone and computer for the purpose of marketing and manage communication with prospect clients or existing clients (Rocha, Glina, Morinho and Nakasato, 2005; Sprigg, Smith and Jackson, 2003).
Methodology: The study was conducted via observation of working condition and face to face interview with call center operators. Measurement of anthropometrics was also conducted.
Results: Ergonomics issues found at call center were inappropriate work condition and workstation which lead to awkward sitting posture (sitting with forward leaning posture, raised shoulder, feet not supported on floor). Besides that organizational policy which required high job demand and subsequently lead to prolonged sitting and static posture (very minimal posture changes). Combination all these factors lead to musculoskeletal symptoms and the operators reported of having neck, shoulder, upper back and lower back pain compared to other body parts.
Conclusion: The management should embark on organization wide ergonomics management program and should review the current policy and create safe and healthy working environment by providing suitable workstation for the operators in order to prevent musculoskeletal.
Introduction: Workers in hospitals are exposed to various occupational hazards such as high level disinfectants (HLD).
Disinfection is an essential component of the endoscope reprocessing. In the Endoscopy Unit of Queen Elizabeth Hospital,
Succindialdehyde (SA) is used as the disinfectant for endoscope reprocessing. SA has properties that are similar to formaldehyde
in regard to contact allergies and toxicity. The purpose of this case study is to describe the occurrence of work related symptoms
(WRS), the proper use of personal protective attire (PPE) and the need of pre-employment health enquiries for those exposed to SA.
Methodology: This was a cross sectional case study. Twenty eight gastrointestinal assistants (GIA) from the thirty two exposed staff
working with the Queen Elizabeth Hospital’s Endoscopy Unit, who fulfilled the study criteria, were given a modified Respiratory
Surveillance Questionnaire. This questionnaireis used as the health surveillance tool for the staff exposed to the occupational
respiratory hazard by the Occupational Health Unit, University of Edinburgh. Results: Most of the GIAs complained of headache
(85.7%), skin irritations (60.7%) followed by 57.1% watery eyes, wheeziness and runny nose. Majority (92.9%) of the GIAs wore
personal protective equipment (PPE) during the disinfection procedure. Pre-employment enquiries regarding asthma, skin and
mucosal sensitivity problems and lung function were not made to any of the GIAs. Only 14.3% of them do annual health surveillances.
Conclusion: Most of the GIAs, 92.9% experienced at least one WRS despite wearing PPE. Staff exposed to the chemical disinfectants
should wear proper PPE and do annual health surveillances. By practising this, we may avoid WRS and treat the staff accordingly.
A study was undertaken to determine the effect of polyethylene and polystyrene used in the manufacture of plastic items on colour perception. Colour vision was assessed using the Ishihara plates, panel 015 test and the Farnsworth Munsell 100-Hue test. Two factories were chosen at random. One factory (referred here as factory A) used virgin resin in pellet form (polyethylene) in the manufacturing of plastic containers to store consumer edible oil. The other factory (referred as factory B) used polystyrene to make plastic bags. A total of 39 healthy employees from factory A (mean age 26.4 :t 8.2 years) and 40 healthy employees from factory B (mean age 26.8 :t 9.6 years) were recruited in this study. A control group of 27 normal healthy subjects (mean age 27.4 :t 4.3 years) who were employees of UKM with no occupational involvement with petroleum derivatives were also recruited in this study and they performed the same colour vision tests. All subjects passed the Ishihara plates test showing that none of the subjects (employees of factory A and B, and control subjects) had a congenital red-green defect. All control subjects passed all of the colour vision tests whilst some employees of factories A and B failed the 015 and FM100 Hue tests. For employees from factory A results from the 015 test showed that 7 (17.9%) had a tritan (blue-yellow) type of defect and 1 (2.6%) had a complex type of defect. The FM 100 Hue results of factory A employees showed that 51.3% (n=20) had a complex type of defect. Total error scores (TES) calculated from the FM 100 Hue test revealed that employees from factory A had a statistically significant higher mean TES of 65.13:!: 48.31 compared to that of control subjects with a mean TES of 31.26:!: 14.93. For employees in factory B, 10 employees (25.0%) had a tritan (blue-yellow) type of defect and 2 (5.0%) had a complex type of defect. Results of the FM 100 Hue test showed that 4 employees (1.0%) had a tritan type of defect whereas 22 (55.0%) had a complex type of defect. Mean total error scores (TES) calculated from the FM 100 Hue test revealed that employees from factory B had a statistically significant higher mean TES of 71.54 :t 54.63 compared with that of control subjects with a mean TES of 31.26 :t. 14.93
The above results show that employees of the plastic factories studies are associated with a higher risk of acquiring colour vision defects as compared to normal subjects who are not engaged in the plastic manufacturing industry. This may have an implication towards the future retinal health of employees in petrod1emical-based industries.
In this research, the biodiesel from WCO is used in order to reduce the exhaust emission and to investigate the
community perception regarding to the human health. Biodiesel production is conducted using trans-esterification
process with holding time of 2 hours, temperature of 60 oC and conventional frequency of 20 kHz and then followed
by washing process with holding time of 1 hours, temperature of 50 oC and the frequency of 5 kHz. Biodiesel can
reduce exhaust emission of NOx up to 55%, NO gas up to 57%, increase CO gas up to 25% and increase CO2 gas up
to 43.18% as compared to diesel fuel. In addition, biodiesel is achieve good responds from 35 respondents about the
biodiesel importance.
This study is carried out to establish the prevalence of Work-related Musculoskeletal Disorders (MSD) among
the Malaysian workforce population in order to propose some measures to benefit the people at large. Secondary data
from three studies among drivers, clerical workers using visual display terminals (VDT) and fabrication workers were
used to report the prevalence of MSDs and the associated risk factors. The study identified high prevalence of MSDs in
multiple body regions. The MSD occurrence was also significantly associated with psychosocial factors. There is need
for organisations to consider such factors in work design, which will reduce the high prevalence and high financial
implications associated with MSDs among workers.
A poor Indoor Air Quality (IAQ) is a crucial problem which produces by the improper maintenance of Mechanical Ventilation and Air Conditioning (MVAC) ducting. A budget constraint intimidates for the practise of monitoring of the MVAC ducting. Thus IAQ measurements were conducted at the room where the air supplied by centralized air conditioning. It has been performed at four different offices that supply by two different Air Handling Unit (AHU). Walkthrough survey was conducted and the area samplings were selected for data collection. This paper examines the result of comparison of air ducting and air quality at academic office building, Universiti Tun Hussein Onn Malaysia (UTHM). The parameters involved were Temperature (°C), Relative Humidity (RH), Carbon Dioxide (CO2) and Carbon Monoxide (CO). Pictures were also captured to demonstrate the real conditions inside the ducting by using Mechanical Robot. Thus, duct cleaning was recommended to be an exceptional platform for the IAQ improvement.
There are several alternative sampling and analytical methods available for the determination of respirable
crystalline silica exposure among workers. The commonly used ones are, (1) NIOSH Manual Analytical Method
No.7500(NMAM 7500) which is Silica, crystalline, by X-ray difractometer via filter deposition(NIOSH 2003), and
(2) MDHS 101 (Methods for the Determination of Hazardous Substances (MDHS) Guidance No.101: Respirable
crystalline silica in respirable airborne dust). The aim of this study is to compare applicability of respirable crystalline
silica sampling and analysis between method MDHS 101 and NMAM 7500. Laboratory procedures will be performed
strictly based on MDHS 101 and NMAM 7500. Both methods apply X-ray diffraction as analytical technique with
many variations on sampling techniques and laboratory preparations. Quality assurance values such as detection
limits, accuracy and precision are derived from both data and will be compared to determine which of the method
establishes better quality assurance. The method which establishes better quality assurance will be recommend to be
used in Malaysian respirable crystalline silica monitoring programme. The strength of this research lies on its potential
to provide local capabilities in analysis of respirable crystalline silica in Malaysian setting.
This study has been conducted in a new constructed building of NIOSH Malaysia located at Bandar Baru Bangi, Selangor. The goal of the case study is focusing on the level of Indoor Air Contaminants (IAC) including chemical contaminants within three consequent stages which are before furniture install, after furniture install and during one month occupancy. This study was divided the sampling area into two main facilities which are training and office setting. The contaminants has been measured consist of sixparameters such as Carbon Dioxide (CO2), Carbon Monoxide (CO), Total Volatile Organic Compounds (TVOC), Formaldehyde, Respirable Particulates (PM10) and Ozone. The result of Carbon Monoxide (CO), Total Volatile Organic Compound (TVOC), Respirable Particulates (PM10) and Ozone show an increasing trend across the three sampling stages. The Formaldehyde show an increasing trend in the first and second stages but were reduced significantly the last stage of sampling. These finding indicates that furniture and fittings installed might be a potential sources of indoor air contaminants. The management should be aware to their indoor air status to protect the occupant from the risk of unwanted exposure especially during the early stage of building occupancy.