MyMedR

The impact of surface preparation on shear bond strength of metallic orthodontic brackets bonded with a resin-modified glass ionomer cement

Elnafar AA, Alam MK, Hasan R

J Orthod, 2014 Sep;41(3):201-7.

PMID: 25143559 DOI: 10.1179/1465313314Y.0000000097

The aim of this study was to assess the effects of four enamel preparation techniques on shear bond strength (SBS) of brackets bonded with a resin-modified glass ionomer cement (RMGIC). Adhesive Remnant Index (ARI) and enamel surface roughness (Ra) were also investigated after cement removal.

Matched MeSH terms: Dental Bonding*

Fulltext Shear bond strength of orthodontic brackets bonded with different curing methods

Faisal Ismail Bahnasi, Nagham Mohammed Abdullah, Mohamed Ibrahim Abu-Hassan

Compendium of Oral Science, 2014;1(1):24-29.

MyJurnal

Objectives: To evaluate the effect of light-cure devices and curing times on the shear bond strength (SBS) of orthodontic brackets.

Material and Methods: 60-extracted human premolars were divided into 6-groups of 10-teeth each and bonded with stainless-steel brackets by using 3M Unitek Transbond XT composite. Specimens were cured with halogen, LED and plasma arc lights with two different times for each. The specimens were subjected to shear force till debond with a crosshead speed of 1mm/min and tested after 5min. The stress was calculated and data were subjected to statistical analysis.

Results: one-way ANOVA and Dunnett T3 post hoc comparison test were used. There were no significant differences between the 6 groups (p < 0.05).

Conclusions: all curing light methods with loading force after 5 min achieved SBS more than the normal range; therefore, arch wire can be inserted at the same visit using any of tested curing light device or curing time.

Matched MeSH terms: Dental Bonding

Sealing ability of various restorative materials as coronal barriers between endodontic appointments

Tapsir Z, Aly Ahmed HM, Luddin N, Husein A

J Contemp Dent Pract, 2013 Jan 1;14(1):47-50.

PMID: 23579892

To evaluate and compare the microleakage of various restorative materials used as coronal barriers between endodontic appointments.

Matched MeSH terms: Dental Bonding*

Fulltext Effects of curing mode of resin cements on the bond strength of a titanium post: An intraradicular study

Reza F, Lim SP

J Conserv Dent, 2012 Apr;15(2):123-6.

PMID: 22557808 DOI: 10.4103/0972-0707.94576

To compare push-out bond strength between self-cured and dual-cured resin cement using a titanium post.

Matched MeSH terms: Dental Bonding

Fulltext The effect of bur preparation on the surface roughness and reline bond strength of urethane dimethacrylate denture base resin

Baig MR, Ariff FT, Yunus N

Indian J Dent Res, 2011 Mar-Apr;22(2):210-2.

PMID: 21891887 DOI: 10.4103/0970-9290.84288

BACKGROUND: The clinical success of relining depends on the ability of reline resin to bond to denture base. Surface preparations may influence reline bond strength of urethane-based dimethacrylate denture base resin.
AIM: To investigate the effect of bur preparation on the surface roughness (R a ) of eclipse denture base resin and its shear bond strength (SBS) to an intra-oral self-curing reline material. The mode of reline bonding failure was also examined.
MATERIALS AND METHODS: Twenty-four cylindrical Eclipse™ specimens were prepared and separated into three groups of eight specimens each. Two groups were subjected to mechanical preparation using standard and fine tungsten carbide (TC) burs and the third group (control) was left unprepared. The R a of all specimens was measured using a contact stylus profilometer. Subsequently, relining was done on the prepared surface and SBS testing was carried out a day later using a universal testing machine.
RESULTS: One-way ANOVA revealed significant differences (P<0.05) in R a and SBS values for all the groups. Post-hoc Tukey's HSD test showed significant differences (P<0.05) between all the groups in the R a values. For SBS also there were significant differences (P<0.05), except between standard bur and control.
CONCLUSIONS: 1) There was a statistically significant difference in the R a of Eclipse™ specimens prepared using different carbide burs (P<0.05). 2) There was a statistically significant difference in the relined SBS (P<0.05) when prepared using different burs, but the difference between the standard bur and the control group was not statistically significant.

Matched MeSH terms: Dental Bonding*

Apical microleakage evaluation of system B compared with cold lateral technique: In vitro study

Farea M, Masudi S, Wan Bakar WZ

Aust Endod J, 2010 Aug;36(2):48-53.

PMID: 20666748 DOI: 10.1111/j.1747-4477.2009.00187.x

The aim of this study was to evaluate in vitro the apical sealing ability of cold lateral and system B root filling techniques using dye penetration. Eighty-six extracted single-rooted human teeth were prepared and randomly divided into two experimental groups to be obturated by cold lateral condensation (n = 33) and system B (n = 33). The remaining 20 teeth served as positive and negative controls. The roots were embedded for 72 h in methylene blue dye solution and sectioned transversely for dye penetration evaluation using stereomicroscope. The results of this study showed that cold lateral condensation leaked significantly more (P < 0.001) than system B technique.

Matched MeSH terms: Dental Bonding

Shear bond strength of two chemically different denture base polymers to reline materials

Ahmad F, Dent M, Yunus N

J Prosthodont, 2009 Oct;18(7):596-602.

PMID: 19515166 DOI: 10.1111/j.1532-849X.2009.00481.x

This study evaluated the shear bond strengths of light-polymerized urethane dimethacrylate (Eclipse) and heat-polymerized polymethylmethacrylate (Meliodent) denture base polymers to intraoral and laboratory-processed reline materials.

Matched MeSH terms: Dental Bonding/methods*

Comparison of the load at fracture of Turkom-Cera to Procera AllCeram and In-Ceram all-ceramic restorations

AL-Makramani BM, Razak AA, Abu-Hassan MI

J Prosthodont, 2009 Aug;18(6):484-8.

PMID: 19694015

PURPOSE: This study investigated the occlusal fracture resistance of Turkom-Cerafused alumina compared to Procera AllCeram and In-Ceram all-ceramic restorations.

MATERIALS AND METHODS: Sixmaster dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Ten copings of 0.6 mm thickness were fabricated from each type of ceramic, for a total of thirty copings. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented with resin luting cement Panavia F according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.

RESULTS: The results of the present study showed the following mean loads at fracture: Turkom-Cera (2184 +/- 164 N), In-Ceram (2042 +/- 200 N), and Procera AllCeram (1954 +/- 211 N). ANOVA and Scheffe's post hoc test showed that the mean load at fracture of Turkom-Cera was significantly different from Procera AllCeram (p < 0.05). Scheffe's post hoc test showed no significant difference between the mean load at fracture of Turkom-Cera and In-Ceram or between the mean load at fracture of In-Ceram and Procera AllCeram.

CONCLUSION: Because Turkom-Cera demonstrated equal to or higher loads at fracture than currently accepted all-ceramic materials, it would seem to be acceptable for fabrication of anterior and posterior ceramic crowns.

Matched MeSH terms: Dental Bonding

SEM analyses of repaired glass-ionomer cements

Jamaluddin A, Pearson GJ

Asian J Aesthet Dent, 1993 Jan;1(1):19-23.

PMID: 8149147

This study assessed the nature of the adhesion in repaired glass-ionomer restorative materials. Two chemically different glass-ionomer cements, Ketac Fil and Chemfil II Cap, and three different methods of conditioning the surface for repair were employed. Specimens of each material were prepared and the cut surfaces were then treated with either 35% phosphoric acid, 35% polyacrylic acid or a combination of phosphoric acid followed by polyacrylic acid. Freshly mixed material was injected against these treated surfaces and allowed to set under simulated intraoral conditions. The specimens were tested to failure in flexion after seven days storage. Assessment of the fractured surfaces was then carried out using the scanning electron microscope. The results showed the occurrence of both adhesive and cohesive failure.

Matched MeSH terms: Dental Bonding*

Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials

Sulong MZ, Setchell DJ

J Prosthet Dent, 1991 Dec;66(6):743-7.

PMID: 1805022

Adhesive bond strength studies for the tray adhesive of an addition vinyl polysiloxane (President) impression material were conducted with an acrylic resin, chromium-plated brass, and plastic trays. Tensile and shear stress studies were performed on the Instron Universal testing machine. Acrylic resin specimens roughened with 80-grit silicon carbide paper exhibited appreciably higher bond strengths compared with different types of tray material and methods of surface preparation.

Matched MeSH terms: Dental Bonding

Displaying publications 21 - 30 of 30 in total