Displaying publications 21 - 29 of 29 in total

Abstract:
Sort:
  1. Adib Asmawi Mohd Yusoff, Irniza Rasdi, Ahmed S. Mahmoud Ben Hameid, Karmegam Karuppiah
    MyJurnal
    Ergonomic is important in classroom. Sitting for protracted period in class may lead students to develop musculoskeletal disorders. Their physical health and performance in the class may increase by designing school furniture that match with human body. In Malaysia, there is a lack of ergonomic assessment for school environment especially in urban areas. The aim of this study is to determine the mismatch between the furniture dimension and anthropometric parameters among primary school children in Putrajaya. This is a cross-sectional study which involved 100, Year 1 and Year 6 primary school students randomly selected in Putrajaya. Five anthropometric measurements (popliteal height, buttock popliteal length, elbow height, shoulder height (sitting), hip breadth) as well as five furniture dimensions (seat height, seat depth, seat width, backrest height and seat to desk height) were measured. Instrument used is Martin type anthropometer set, SECA body meter, and SECA weighing scale. Calculation for determining mismatch between the furniture and anthropometric measures were calculated using a standard mismatch formula. There was 100% mismatch for seat height, seat depth, and seat to seat to desk height for Year 1. As for Year 6, mismatch was reported 100% for backrest height and seat to desk height. There were significance difference for parameters of popliteal height between Year 1 and Year 6 and between male and female of Year 1. There was a presence of mismatch between furniture dimension and children anthropometric measurement. Proposed dimension of furniture shows decrease in percentage of mismatch for the most parameter of anthropometric measurement.
    Matched MeSH terms: Interior Design and Furnishings
  2. Khairudin MN, Vallikkannu N, Gan F, Hamdan M, Tan PC
    Am J Obstet Gynecol MFM, 2024 Apr;6(4):101324.
    PMID: 38447674 DOI: 10.1016/j.ajogmf.2024.101324
    BACKGROUND: Labor pain varies significantly among pregnant women, ranging from mild to extremely distressing. Nonpharmacologic pain relief methods during vaginal birth are increasingly popular, either as a complement to pharmacologic agents or, at times, as the primary method of pain relief. Multiple trials have reported that manual or by-hand massage reduces labor pain. The effectiveness of full-body mechanical massage using electric massage chairs on labor pain remains unexplored.

    OBJECTIVE: This study aimed to evaluate mechanical massage using an electric massage chair on labor pain in nulliparous women.

    STUDY DESIGN: A randomized counterbalanced crossover trial was conducted in a university hospital in Malaysia from August 2022 to February 2023. Eligible nulliparas in labor with a minimum labor pain score of 5 (0-10 numerical rating scale) were enrolled. Participants were randomized to 30 minutes on the massage chair with mechanical massage followed by 30 minutes on the massage chair without mechanical massage or the other way around in the massage sequence. The primary outcome was a change in pain score comparing pain with and without mechanical massage as a paired comparison for the entire trial participants. The secondary outcomes were across arms analyses of maternal and neonatal outcomes. The paired t test, t test, Mann-Whitney U test, chi-square test, and Fisher exact test were used as appropriate for the data.

    RESULTS: Overall, 208 women were randomized: 104 to each intervention. Data were available from 204 participants (103 randomized to massage first and 101 to no massage first). The primary outcomes of change in labor pain scores (0-10 numerical rating scale) after massage and no massage (all participants included after crossover, paired t test analysis) were 4.51±2.30 and 5.38±2.10, respectively (mean difference, -0.87; 95% confidence interval, -1.14 to -0.59; P

    Matched MeSH terms: Interior Design and Furnishings
  3. Romli MH, Mackenzie L, Lovarini M, Tan MP
    BMJ Open, 2016 08 16;6(8):e012048.
    PMID: 27531736 DOI: 10.1136/bmjopen-2016-012048
    OBJECTIVE: The relationship between home hazards and falls in older Malaysian people is not yet fully understood. No tools to evaluate the Malaysian home environment currently exist. Therefore, this study aimed to pilot the Home Falls and Accidents Screening Tool (HOME FAST) to identify hazards in Malaysian homes, to evaluate the feasibility of using the HOME FAST in the Malaysian Elders Longitudinal Research (MELoR) study and to gather preliminary data about the experience of falls among a small sample of Malaysian older people.

    DESIGN: A cross-sectional pilot study was conducted.

    SETTING: An urban setting in Kuala Lumpur.

    PARTICIPANTS: 26 older people aged 60 and over were recruited from the control group of a related research project in Malaysia, in addition to older people known to the researchers.

    PRIMARY OUTCOME MEASURE: The HOME FAST was applied with the baseline survey for the MELoR study via a face-to-face interview and observation of the home by research staff.

    RESULTS: The majority of the participants were female, of Malay or Chinese ethnicity and living with others in a double-storeyed house. Falls were reported in the previous year by 19% and 80% of falls occurred at home. Gender and fear of falling had the strongest associations with home hazards. Most hazards were detected in the bathroom area. A small number of errors were detected in the HOME FAST ratings by researchers.

    CONCLUSIONS: The HOME FAST is feasible as a research and clinical tool for the Malaysian context and is appropriate for use in the MELoR study. Home hazards were prevalent in the homes of older people and further research with the larger MELoR sample is needed to confirm the validity of using the HOME FAST in Malaysia. Training in the use of the HOME FAST is needed to ensure accurate use by researchers.

    Matched MeSH terms: Interior Design and Furnishings/statistics & numerical data*
  4. Sen RN, Yeow PH
    Int J Occup Saf Ergon, 2003;9(1):57-74.
    PMID: 12636892
    The study aimed at reducing the occupational health and safety problems faced by the manual component insertion operators. Subjective and objective assessments, and direct observations were made in the printed circuit assembly factory. Simple and low-cost ergonomic interventions were implemented, that is, repairing chairs, reducing high workloads, assigning operators to a maximum of 2 workstations, confining machines that emitted bad smell and much noise, and providing finger work aids. The results of the interventions were reductions in operators' work discomforts, that is, chair discomfort (by 90%), high work stress, and discomfort due to profound change in their workstations. Their health hazards were also eliminated, that is, inhalation of toxic fumes, exposure to too much noise, and pain due to pressing sharp components.
    Matched MeSH terms: Interior Design and Furnishings
  5. Ng TP, Hui KP, Tan WC
    Thorax, 1994 Apr;49(4):347-51.
    PMID: 8202905
    BACKGROUND: The prevalence and morbidity of asthma vary greatly among different ethnic communities and geographical locations, but the roles of environmental and genetic factors are not fully understood. The differences in prevalence of adult asthma among Chinese, Malay, and Indian ethnic groups in Singapore were examined, and the extent to which these could be explained by personal and environmental factors were investigated.
    METHODS: A stratified disproportionate random sample (n = 2868) of Chinese (n = 1018), Malays (n = 967), and Indians (n = 883) of both sexes was drawn from households in five public housing estates, and an interviewer administered questionnaire was used to determine cumulative and current prevalence of "physician diagnosed asthma" (symptoms with a physician diagnosis of asthma).
    RESULTS: Lifetime cumulative prevalence (standardised to the general population) of "physician diagnosed asthma" was 4.7% in men and 4.3% in women; 12 month period prevalences were 2.4% and 2.0%, respectively. Cumulative prevalence of asthma was significantly higher in Indians (6.6%) and Malays (6.0%) than in Chinese (3.0%); period prevalences of asthma were 4.5% in Indians, 3.3% in Malays, and 0.9% in Chinese. Ownership of cats or dogs was more frequent in Malays (15.4%) and Indians (11.2%) than in Chinese (8.8%). Rugs and carpets were also more frequently used by Malays (52.2%) and Indians (40.7%) than by Chinese (8.9%). Current smoking prevalences were higher in Malays (27.3%) than in Indians (19.4%) and Chinese (23.0%). Malays and Indians did not have higher rates of atopy (11.1% and 15.2%, respectively) than Chinese (15.4%). Adjustment for these factors in multivariate analyses reduced the greater odds of asthma in Malays and Indians, but not to a significant extent.
    CONCLUSIONS: There are ethnic differences in the prevalence of asthma in Singapore which are not entirely explained by differences in smoking, atopy, or other risk factors. Other unmeasured environmental factors or genetic influences are likely to account for residual differences in the prevalence of asthma.
    Matched MeSH terms: Interior Design and Furnishings
  6. Nor Mohd Razif Noraini, Leman, A.M., Ahmad Sayuti ZainalAbidin, Ruslina Mohd. Jazar, LailaShuhada Mat Zin, Rasdan Ismail, et al.
    MyJurnal
    This study has been conducted in a new constructed building of NIOSH Malaysia located at Bandar Baru Bangi, Selangor. The goal of the case study is focusing on the level of Indoor Air Contaminants (IAC) including chemical contaminants within three consequent stages which are before furniture install, after furniture install and during one month occupancy. This study was divided the sampling area into two main facilities which are training and office setting. The contaminants has been measured consist of sixparameters such as Carbon Dioxide (CO2), Carbon Monoxide (CO), Total Volatile Organic Compounds (TVOC), Formaldehyde, Respirable Particulates (PM10) and Ozone. The result of Carbon Monoxide (CO), Total Volatile Organic Compound (TVOC), Respirable Particulates (PM10) and Ozone show an increasing trend across the three sampling stages. The Formaldehyde show an increasing trend in the first and second stages but were reduced significantly the last stage of sampling. These finding indicates that furniture and fittings installed might be a potential sources of indoor air contaminants. The management should be aware to their indoor air status to protect the occupant from the risk of unwanted exposure especially during the early stage of building occupancy.
    Matched MeSH terms: Interior Design and Furnishings
  7. Al-Husuny, A., Rampal, L., Manohar, A.
    MyJurnal
    Work-Related Hand Injuries (WRHIs) may result in disability and diminished productivity and cause economic impacts not only to the individual, worker’s families and industries, but to the local community as well.
    Objectives: To determine the prevalence of severe Work-Related Hand Injuries (WRHIs) and factors associated at a tertiary hospital.
    Methods: A pre-tested validated questionnaire was used to obtain data. All patients 18 years and above with WRHIs seen at a tertiary hospital between January 2010 and June 2010 were included in the study. Data was analysed using SPSS version 18.
    Results: Out of the 297 industrial accidents, 74 (24.9%) were WRHIs. Among those with WRHIs, (47.3%) of them had severe hand injuries. The overall mean age of the respondents was 30.36 (± 9.54 SD) years. Majority (82.5%) of the injuries occurred between Mondays to Friday. Majority (70.1%) of hand injuries were caused by machine and 48.6% of the hand injuries occurred when the hand was caught in the operating part of the machine. Majority (62.1%) of the respondents had fingers’ injuries and 32.4% had open fracture. Bivariate analysis showed that there was significant association between severity of WRHIs and locations of injury, mechanisms of injury, sources of injury and sectors of industry (p < 0.05). Logistic regression analysis showed that WRHIs was significantly associated with source of injury and sector of industry. Respondents with hand injury resulted while operating on mechanical machine was 26 times more likely to report severe WRHIs than those with other sources of their hand injury like (sharp tool, heavy door, and wet floor). Respondents working in metal-machinery industries were eight times more likely to report severe WRHIs than those who working in other sectors of industry like (wood-furniture, constriction, food preparing, service and automotive).
    Conclusions: WRHIs contributed to 24.9% of all industrial accidents seen at the emergency department and orthopaedic clinic and 47.3% of the respondents with WRHIs had severe hand injuries. Severity of WRHIs was significantly associated with sources of injury and sectors of industry.
    Study site: emergency room, orthopaedic ward, general surgery ward and the orthopaedic outpatient clinic of a tertiary hospital
    Matched MeSH terms: Interior Design and Furnishings
  8. Sen A, Richardson S
    J Hum Ergol (Tokyo), 2007 Dec;36(2):45-50.
    PMID: 18572794 DOI: 10.11183/jhe1972.36.2_45
    Personal computers are one of the commonest office tools in Malaysia today. Their usage, even for three hours per day, leads to a health risk of developing Occupational Overuse Syndrome (OOS), Computer Vision Syndrome (CVS), low back pain, tension headaches and psychosocial stress. The study was conducted to investigate how a multiethnic society in Malaysia is coping with these problems that are increasing at a phenomenal rate in the west. This study investigated computer usage, awareness of ergonomic modifications of computer furniture and peripherals, symptoms of CVS and risk of developing OOS. A cross-sectional questionnaire study of 136 computer users was conducted on a sample population of university students and office staff. A 'Modified Rapid Upper Limb Assessment (RULA) for office work' technique was used for evaluation of OOS. The prevalence of CVS was surveyed incorporating a 10-point scoring system for each of its various symptoms. It was found that many were using standard keyboard and mouse without any ergonomic modifications. Around 50% of those with some low back pain did not have an adjustable backrest. Many users had higher RULA scores of the wrist and neck suggesting increased risk of developing OOS, which needed further intervention. Many (64%) were using refractive corrections and still had high scores of CVS commonly including eye fatigue, headache and burning sensation. The increase of CVS scores (suggesting more subjective symptoms) correlated with increase in computer usage spells. It was concluded that further onsite studies are needed, to follow up this survey to decrease the risks of developing CVS and OOS amongst young computer users.
    Matched MeSH terms: Interior Design and Furnishings
  9. Yaser AZ, Abd Rahman R, Kalil MS
    Pak J Biol Sci, 2007 Dec 15;10(24):4473-8.
    PMID: 19093514
    Composting of Palm Oil Mill Sludge (POMS) with sawdust was conducted in natural aerated reactor. Composting using natural aerated reactor is cheap and simple. The goal of this study is to observe the potential of composting process and utilizing compost as media for growing Cymbopogun citratus, one of Malaysia herbal plant. The highest maximum temperature achieved is about 40 degrees C and to increase temperature bed, more biodegradable substrate needs to be added. The pH value decrease along the process with final pH compost is acidic (pH 5.7). The highest maximum organic losses are about 50% with final C/N ratio of the compost is about 19. Final compost also showed some fertilizing value but need to be adjusted to obtain an ideal substrate. Addition of about 70% sandy soil causes highest yield and excellent root development for C. citratus in potted media. Beside that, compost from POMS-sawdust also found to have fertilizer value and easy to handle. Composting of POMS with sawdust shows potential as an alternative treatment to dispose and recycle waste components.
    Matched MeSH terms: Interior Design and Furnishings
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links