Displaying publications 441 - 450 of 450 in total

Abstract:
Sort:
  1. Bharatham H, Md Zuki Abu Bakar Zakaria, Perimal EK, Loqman Mohamad Yusof, Muhajir Hamid
    Sains Malaysiana, 2014;43:1023-1029.
    Molluscan shells are attracting research interest due to the diverse application properties possessed. As shells are very similar to bones, this study was conducted to analyze the mineral and physiochemical composition of Cockle (Anadara granosa) shell and three other types of molluscan shell, namely Strombus canarium, Oliva sayana and Terebra dislocata as potential biomaterial for bone tissue engineering applications. Approximately 200 g of shells from each species were processed and powdered for the purpose of this study. Carbon was analyzed using the carbon analyzer while minerals and heavy metals through ICP-MS. The phase purity and crystallographic structures of the powders were identified using X-Ray Diffractometer (XRD) while the chemical functionality was determined using the Fourier transform infrared (FTIR) spectrophotometer. The analysis showed that Cockle shells contained higher content of calcium and carbon including varying amount of other minor elements comparatively. However, all four types of shell powders were found to contain below detectable levels of toxic elements. Physiochemical analysis on phase purity and crystallographic structures showed similar characteristics of carbonate group present in all four shell types. A predominantly aragonite form of calcium carbonate was detected in both XRD diffractogram and FTIR spectra for all samples. Our findings demonstrated that different types of molluscan shells have almost similar mineral and physiochemical characteristics and a predominantly aragonite form of calcium carbonate that provides a strong basis for their use as a potential bone tissues engineering material.
    Matched MeSH terms: Metals, Heavy
  2. Habiba U, Siddique TA, Joo TC, Salleh A, Ang BC, Afifi AM
    Carbohydr Polym, 2017 Feb 10;157:1568-1576.
    PMID: 27987870 DOI: 10.1016/j.carbpol.2016.11.037
    A chitosan/polyvinyl alcohol (PVA)/zeolite composite was fabricated in this study. The composite was analyzed through field emission scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis, and weight loss test. FTIR and XRD results revealed a strong interaction among chitosan, PVA, and zeolite. Weight loss test results indicated that the composite was stable in acidic and basic media. Congo red was removed through flocculation, and the removal rate was 94% at an initial concentration of 100mg/L for a dose of 1g/L. The removal rate of methyl orange was controlled by adsorption at an initial concentration of less than 100mg/L. Flocculation occurred at high concentrations. The removal rate was also 94% at an initial concentration of 500mg/L for a dose of 5g/L. The adsorption behavior of the composite for the removal of methyl orange and Cr(VI) was described by using a pseudo-second-order kinetic model. The adsorption capacity of the composite for Cr(VI) was 450mg/g. Therefore, the synthesized composite exhibited versatility during the removal of dyes and heavy metals.
    Matched MeSH terms: Metals, Heavy
  3. Thomas, R., Bhat, Rajeev, Kuang, Y.T.
    MyJurnal
    In this study, three popular, regionally grown rice varieties (Bario, brown and white) were compared with three of the most popular and highly marketed imported rice varieties (black, glutinous and basmati rice) in Penang region of Malaysia. Rice samples were evaluated for amino acids, fatty acids, minerals, heavy metals and dietary fiber composition. Overall, amino acids content among all the rice samples were comparable to each other. Results with regard to minerals showed potassium to be high in brown rice (197.41 mg/100g), while magnesium was recorded to be high in black rice (107.21 mg/100g). Heavy metals such as cadmium, nickel, mercury and lead, though present, they were in negligible amounts. Among all the rice varieties investigated, the total saturated fatty acid and unsaturated fatty acid content was highest in black rice (5.89%). The soluble dietary fiber was higher in white rice (16.39%), whereas insoluble dietary fiber was high in brown (16.51%) and black rice (14.49%), respectively. Results generated from this study is anticipated to benefit both the health wary consumers (based on their potential nutritional attributes) as well as the local food industries to choose the best rice variety while developing novel rice based food products.
    Matched MeSH terms: Metals, Heavy
  4. Engels S, Fong LSRZ, Chen Q, Leng MJ, McGowan S, Idris M, et al.
    Environ Pollut, 2018 Apr;235:907-917.
    PMID: 29353806 DOI: 10.1016/j.envpol.2018.01.007
    Fossil fuel combustion leads to increased levels of air pollution, which negatively affects human health as well as the environment. Documented data for Southeast Asia (SEA) show a strong increase in fossil fuel consumption since 1980, but information on coal and oil combustion before 1980 is not widely available. Spheroidal carbonaceous particles (SCPs) and heavy metals, such as mercury (Hg), are emitted as by-products of fossil fuel combustion and may accumulate in sediments following atmospheric fallout. Here we use sediment SCP and Hg records from several freshwater lentic ecosystems in SEA (Malaysia, Philippines, Singapore) to reconstruct long-term, region-wide variations in levels of these two key atmospheric pollution indicators. The age-depth models of Philippine sediment cores do not reach back far enough to date first SCP presence, but single SCP occurrences are first observed between 1925 and 1950 for a Malaysian site. Increasing SCP flux is observed at our sites from 1960 onward, although individual sites show minor differences in trends. SCP fluxes show a general decline after 2000 at each of our study sites. While the records show broadly similar temporal trends across SEA, absolute SCP fluxes differ between sites, with a record from Malaysia showing SCP fluxes that are two orders of magnitude lower than records from the Philippines. Similar trends in records from China and Japan represent the emergence of atmospheric pollution as a broadly-based inter-region environmental problem during the 20th century. Hg fluxes were relatively stable from the second half of the 20th century onward. As catchment soils are also contaminated with atmospheric Hg, future soil erosion can be expected to lead to enhanced Hg flux into surface waters.
    Matched MeSH terms: Metals, Heavy
  5. Salman M, Jahan S, Kanwal S, Mansoor F
    Environ Sci Pollut Res Int, 2019 Jul;26(21):21065-21084.
    PMID: 31124071 DOI: 10.1007/s11356-019-05428-z
    The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.
    Matched MeSH terms: Metals, Heavy
  6. Che Soh N', Rapi HS, Mohd Azam NS, Santhanam RK, Assaw S, Haron MN, et al.
    PMID: 33488747 DOI: 10.1155/2020/6688084
    Diopatra claparedii which is colloquially known as Ruat Sarung can be found along the west coast of Peninsular Malaysia. The species has a unique ability to regenerate anterior and posterior segments upon self-amputation or injury, thus having potential as a wound healing promoter. In this study, the wound healing potential of D. claparedii aqueous extract on acute wound model in rats was revealed for the first time. Various concentrations (0.1%, 0.5%, and 1.0% w/w) of D. claparedii ointment were formulated and tested on Sprague Dawley rats through topical application on full-thickness skin wounds for 14 days. The wound healing effects were investigated via behaviour observation, wound contraction, and histopathological analysis. Quality assessment was performed via skin irritation test, microbial contamination test (MCT), and heavy metal detection. The study also included test for antibacterial activities and detection of bioactive compounds in D. claparedii. One percent of D. claparedii ointment showed rapid wound healing potential with good soothing effects and more collagen deposition in comparison to the commercial wound healing ointments such as acriflavine (0.1% w/v) and traditional ointment gamat (sea cucumber extract) (15.0% w/v). No local skin irritation, microbial contamination, and insignificant concentration of heavy metals were observed, which indicate its safe application. Moreover, the aqueous extract of D. claparedii exhibited antibacterial activities against Escherichia coli and Pseudomonas aeruginosa with minimum inhibitory concentration (MIC) value at 0.4 g/ml. 1H NMR analysis of the aqueous extract of D. claparedii revealed some metabolites that might be responsible for its wound healing properties such as amino acids, halogenated aromatics, organic acids, vitamins, and others. Altogether, these results suggested that the aqueous extract of D. claparedii could be utilised as an alternative natural wound healing promoter.
    Matched MeSH terms: Metals, Heavy
  7. Ullah F, Irfan M, Khatoon S, Khalil S, Sher A, Alsulami N, et al.
    Braz J Biol, 2025;84:e287016.
    PMID: 39968987 DOI: 10.1590/1519-6984.287016
    The exposure of plant seeds to gamma radiation is a promising prospect to crop improvement through the manipulation of their genetic makeup. Previous studies have shed light on the potential of radiation to enhance the genetic variability. In this study, we investigated the effect of gamma radiation on Pisum sativum seeds under heavy metal (nickel chloride) stress to determine the changes in morpho-biochemical attributes. Morphological parameters such as germination and photosynthetic pigments while biochemical attributes such as protein content, sugar, phenolics, and flavonoids were determined. The results showed that gamma radiation, along with (NiCl2) has a pronounced effect on plant morphology and production. In the biochemical analysis of the range from 50 Gy to 100 Gy, photosynthetic pigments and proteins were significantly associated. Although the 50 Gy dose induced a partial reduction in sugar content while the 100 Gy dose demonstrated a slight improvement relative to the 50 Gy dose. However, the phenol content increased in response to 50 Gy, whereas the flavonoid content decreased compared to the control. In combination with heavy metal (50mM) at Gy doses, the protein, sugar, phenol, and flavonoid contents showed a gradual decrease with the increase in Gy doses. In conclusion, the current study based on observations suggests that the range of gamma radiation from 50 Gy to 100 Gy is suitable for causing the mutant form of seeds. However, further studies should be conducted to determine the precise mechanism, in order to be benefitted from full potential role of gamma radiation in improving productivity under heavy metal stress.
    Matched MeSH terms: Metals, Heavy
  8. Md Nasir NAN, Zakarya IA, Kamaruddin SA
    Environ Sci Pollut Res Int, 2024 Dec;31(58):66360-66371.
    PMID: 39625624 DOI: 10.1007/s11356-024-35598-4
    The potential of two different aquatic macrophytes, Azolla pinnata R.Br. and Lemna minor L., to treat livestock wastewater through phytoremediation was investigated. The physiological analysis includes the removal efficiency of manganese (Mn) from livestock wastewater by AAS. Morphological observation was performed by using a scanning electron microscope (SEM) and visual observation. RAPD analysis was applied to observe the DNA profile. It was observed that the removal efficiency of Mn was higher in L. minor with a 92% removal rate, while in A. pinnata RE, it was at a 77% rate. The higher removal rate of Mn by L. minor showed that plants had a significant impact on the removal of heavy metals, with a p ≤ 0.05. Retention time and the removal of heavy metals were found to be positively correlated. As early as 24 h after exposure to livestock wastewater (LW), the stomata on the leaves of A. pinnata and L. minor have both shrunk, and the root surfaces have shortened. According to the RAPD analysis, A. pinnata only shows an increase in band intensities and no polymorphism, whereas L. minor has 19% polymorphisms that indicate higher tolerance as hyperaccumulators. As a conclusion, L. minor showed no signs of necrosis and performed more efficiently as a hyperaccumulator in LW, with a higher removal efficiency.
    Matched MeSH terms: Metals, Heavy
  9. Chaurasia MK, Ravichandran G, Nizam F, Arasu MV, Al-Dhabi NA, Arshad A, et al.
    Fish Shellfish Immunol, 2016 Jul;54:353-63.
    PMID: 27109581 DOI: 10.1016/j.fsi.2016.04.031
    This study reports the comprehensive comparative information of two different detoxification enzymes such as glutathione S-transferases (GSTs) delta and kappa from freshwater giant prawn Macrobrachium rosenbergii (designated as MrGSTD and MrGSTK) by investigating their in-silico characters and mRNA modulation against various biotic and abiotic oxidative stressors. The physico-chemical properties of these cDNA and their polypeptide structure were analyzed using various bioinformatics program. The analysis indicated the variation in size of the polypeptides, presence or absence of domains and motifs and structure. Homology and phylogenetic analysis revealed that MrGSTD shared maximum identity (83%) with crustaceans GST delta, whereas MrGSTK fell in arthropods GST kappa. It is interesting to note that MrGSTD and MrGSTK shared only 21% identity; it indicated their structural difference. Structural analysis indicated that MrGSTD to be canonical dimer like shape and MrGSTK appeared to be butterfly dimer like shape, in spite of four β-sheets being conserved in both GSTs. Tissue specific gene expression analysis showed that both MrGSTD and MrGSTK are highly expressed in immune organs such as haemocyte and hepatopancreas, respectively. To understand the role of mRNA modulation of MrGSTD and MrGSTK, the prawns were inducted with oxidative stressors such as bacteria (Vibrio harveyi), virus [white spot syndrome virus (WSSV)] and heavy metal, cadmium (Cd). The analysis revealed an interesting fact that both MrGSTD and MrGSTK showed higher (P 
    Matched MeSH terms: Metals, Heavy/toxicity
  10. Neda, G.D., Rabeta, M.S., Ong, M.T.
    MyJurnal
    Aqueous and methanol extracts of the flowers of Clitoria ternatea (CT), a popularly
    plant consumed for blue colour in Nasi Kerabu was selected to explore its cytotoxic
    effect on six types of normal and cancer-origin cell lines. These included the hormone-dependent breast cancer cell line (MCF-7), non-hormone-dependent breast cancer cell
    line (MDA-MB-231), human ovary cancer cell line (Caov-3), human cervical cancer cell line (Hela), human liver cancer cell line (HepG2) and human foreskin fibroblast cell line (Hs27). The anti-proliferation activities of the extracts were examined by employing colorimetric MTT (3-(4,5-dimethylthiazol-2-yl) 2,5 diphenyltetrazolium bromide) assay through time periods of 24, 48 and 72 hours. Preliminary results showed that the water extracted of CT had significant effects (p < 0.05) against MCF-7 with an IC50 value of 175.35 µg/ml. Furthermore, the aqueous and methanolic extracts were investigated by Gas Chromatogram-Mass spectrometry (GC-MS). The GC-MS chromatogram analysis of the water extracted had shown five peaks that represented components in the water extract namely mome inositol (38.7%) and pentanal (14.3%). Fifteen chemical constituents were identified in the methanol extract and the major chemical constituents were mome inositol (33.6%), cyclohexen, 1-methyl-4-(1-methylethylideme)- (7.1%), acetic acid, cyano- (6.5%) and hirsutene (5.7%). Heavy metals tested were at very low levels. The analysis conducted on the flowers provides a strong basis for emphasizing the medicinal and nutritional value of CT.
    Matched MeSH terms: Metals, Heavy
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links