Displaying publications 41 - 60 of 167 in total

Abstract:
Sort:
  1. Naz MY, Ismail NI, Sulaiman SA, Shukrullah S
    Sci Rep, 2015;5:16583.
    PMID: 26561231 DOI: 10.1038/srep16583
    This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45 μm and 150 μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The results revealed significant change in morphology of the eroded samples. In-depth analysis showed that although the metal erosion due to larger particles was significantly higher, the fines also notably damaged the metal surface. The surface damages were appreciably reduced with decrease in impact angle of the accelerated particles. The maximum damages were observed at an impact angle of 90°. The hardness of the samples treated with 45 μm and 150 μm sand remained in the range of 88.34 to 102.31 VHN and 87.7 to 97.55 VHN, respectively. In electrochemical experiments, a triple electrode probe was added into the metal treatment process. The linear polarization resistance (LPR) measurements were performed in slurries having 5% (by weight) of sand particles. LPR of the samples treated with 45 μm and 150 μm sand slurries was calculated about 949 Ω.cm(2) and 809 Ω.cm(2), respectively.
  2. Tan KK, Sy AK, Tandoc AO, Khoo JJ, Sulaiman S, Chang LY, et al.
    Sci Rep, 2015 Jul 23;5:12279.
    PMID: 26201250 DOI: 10.1038/srep12279
    Outbreaks involving the Asian genotype Chikungunya virus (CHIKV) caused over one million infections in the Americas recently. The outbreak was preceded by a major nationwide outbreak in the Philippines. We examined the phylogenetic and phylogeographic relationships of representative CHIKV isolates obtained from the 2012 Philippines outbreak with other CHIKV isolates collected globally. Asian CHIKV isolated from the Philippines, China, Micronesia and Caribbean regions were found closely related, herein denoted as Cosmopolitan Asian CHIKV (CACV). Three adaptive amino acid substitutions in nsP3 (D483N), E1 (P397L) and E3 (Q19R) were identified among CACV. Acquisition of the nsP3-483N mutation in Compostela Valley followed by E1-397L/E3-19R in Laguna preceded the nationwide spread in the Philippines. The China isolates possessed two of the amino acid substitutions, nsP3-D483N and E1-P397L whereas the Micronesian and Caribbean CHIKV inherited all the three amino acid substitutions. The unique amino acid substitutions observed among the isolates suggest multiple independent virus dissemination events. The possible biological importance of the specific genetic signatures associated with the rapid global of the virus is not known and warrant future in-depth study and epidemiological follow-up. Molecular evidence, however, supports the Philippines outbreak as the possible origin of the CACV.
  3. Ibrahim KA, Naz MY, Shukrullah S, Sulaiman SA, Ghaffar A, AbdEl-Salam NM
    Sci Rep, 2020 Apr 03;10(1):5927.
    PMID: 32246028 DOI: 10.1038/s41598-020-62793-3
    The world does not have too much time to ensure that the fast-growing population has enough land, food, water and energy. The rising food demand has brought a positive surge in fertilizers' demand and agriculture-based economy. The world is using 170 million tons of fertilizer every year for food, fuel, fiber, and feed. The nitrogenous fertilizers are being used to meet 48% of the total food demand of the world. High fertilizer inputs augment the reactive nitrogen levels in soil, air, and water. The unassimilated reactive nitrogen changes into a pollutant and harms the natural resources. The use of controlled-release fertilizers for slowing down the nutrients' leaching has recently been practiced by farmers. However, to date, monitoring of the complete discharge time and discharge rate of controlled released fertilizers is not completely understood by the researchers. In this work, corn starch was thermally processed into a week gel-like coating material by reacting with urea and borate. The granular urea was coated with native and processed starch in a fluidized bed reactor having bottom-up fluid delivery system. The processed starch exhibited better thermal and mechanical stability as compared to the native starch. Unlike the pure starch, the storage modulus of the processed starch dominated the loss modulus. The release time of urea, coated with processed starch, remained remarkably larger than the uncoated urea.
  4. Mohd-Padil H, Damiri N, Sulaiman S, Chai SF, Nathan S, Firdaus-Raih M
    Sci Rep, 2017 12 07;7(1):17173.
    PMID: 29215024 DOI: 10.1038/s41598-017-17356-4
    The Burkholderia genus includes many species that are known to survive in diverse environmental conditions including low nutrient environments. One species, Burkholderia pseudomallei is a versatile pathogen that can survive in a wide range of hosts and environmental conditions. In this study, we investigated how a nutrient depleted growth environment evokes sRNA mediated responses by B. pseudomallei. Computationally predicted B. pseudomallei D286 sRNAs were mapped to RNA-sequencing data for cultures grown under two conditions: (1) BHIB as a nutrient rich media reference environment and (2) M9 media as a nutrient depleted stress environment. The sRNAs were further selected to identify potentially cis-encoded systems by investigating their possible interactions with their flanking genes. The mappings of predicted sRNA genes and interactions analysis to their flanking genes identified 12 sRNA candidates that may possibly have cis-acting regulatory roles that are associated to a nutrient depleted growth environment. Our approach can be used for identifying novel sRNA genes and their possible role as cis-mediated regulatory systems.
  5. Ishak IH, Riveron JM, Ibrahim SS, Stott R, Longbottom J, Irving H, et al.
    Sci Rep, 2016 Apr 20;6:24707.
    PMID: 27094778 DOI: 10.1038/srep24707
    Control of Aedes albopictus, major dengue and chikungunya vector, is threatened by growing cases of insecticide resistance. The mechanisms driving this resistance remain poorly characterised. This study investigated the molecular basis of insecticide resistance in Malaysian populations of Ae. albopictus. Microarray-based transcription profiling revealed that metabolic resistance (cytochrome P450 up-regulation) and possibly a reduced penetration mechanism (consistent over-expression of cuticular protein genes) were associated with pyrethroid resistance. CYP6P12 over-expression was strongly associated with pyrethroid resistance whereas CYP6N3 was rather consistently over-expressed across carbamate and DDT resistant populations. Other detoxification genes also up-regulated in permethrin resistant mosquitoes included a glucuronosyltransferase (AAEL014279-RA) and the glutathione-S transferases GSTS1 and GSTT3. Functional analyses further supported that CYP6P12 contributes to pyrethroid resistance in Ae. albopictus as transgenic expression of CYP6P12 in Drosophila was sufficient to confer pyrethroid resistance in these flies. Furthermore, molecular docking simulations predicted CYP6P12 possessing enzymatic activity towards pyrethroids. Patterns of polymorphism suggested early sign of selection acting on CYP6P12 but not on CYP6N3. The major role played by P450 in the absence of kdr mutations suggests that addition of the synergist PBO to pyrethroids could improve the efficacy of this insecticide class and overcome resistance in field populations of Ae. albopictus.
  6. Modarresi-Chahardehi A, Ibrahim D, Fariza-Sulaiman S, Mousavi L
    Rev. Biol. Trop., 2012 Dec;60(4):1567-76.
    PMID: 23342511
    Urtica dioica or stinging nettle is traditionally used as an herbal medicine in Western Asia. The current study represents the investigation of antimicrobial activity of U. dioica from nine crude extracts that were prepared using different organic solvents, obtained from two extraction methods: the Soxhlet extractor (Method I), which included the use of four solvents with ethyl acetate and hexane, or the sequential partitions (Method II) with a five solvent system (butanol). The antibacterial and antifungal activities of crude extracts were tested against 28 bacteria, three yeast strains and seven fungal isolates by the disc diffusion and broth dilution methods. Amoxicillin was used as positive control for bacteria strains, vancomycin for Streptococcus sp., miconazole nitrate (30 microg/mL) as positive control for fungi and yeast, and pure methanol (v/v) as negative control. The disc diffusion assay was used to determine the sensitivity of the samples, whilst the broth dilution method was used for the determination of the minimal inhibition concentration (MIC). The ethyl acetate and hexane extract from extraction method I (EA I and HE I) exhibited highest inhibition against some pathogenic bacteria such as Bacillus cereus, MRSA and Vibrio parahaemolyticus. A selection of extracts that showed some activity was further tested for the MIC and minimal bactericidal concentrations (MBC). MIC values of Bacillus subtilis and Methicillin-resistant Staphylococcus aureus (MRSA) using butanol extract of extraction method II (BE II) were 8.33 and 16.33mg/mL, respectively; while the MIC value using ethyl acetate extract of extraction method II (EAE II) for Vibrio parahaemolyticus was 0.13mg/mL. Our study showed that 47.06% of extracts inhibited Gram-negative (8 out of 17), and 63.63% of extracts also inhibited Gram-positive bacteria (7 out of 11); besides, statistically the frequency of antimicrobial activity was 13.45% (35 out of 342) which in this among 21.71% belongs to antimicrobial activity extracts from extraction method I (33 out of 152 of crude extracts) and 6.82% from extraction method II (13 out of 190 of crude extracts). However, crude extracts from method I exhibited better antimicrobial activity against the Gram-positive bacteria than the Gram-negative bacteria. The positive results on medicinal plants screening for antibacterial activity constitutes primary information for further phytochemical and pharmacological studies. Therefore, the extracts could be suitable as antimicrobial agents in pharmaceutical and food industry.
  7. Sulaiman S, Izman S, Uday MB, Omar MF
    RSC Adv, 2022 Feb 10;12(9):5428-5438.
    PMID: 35425550 DOI: 10.1039/d1ra06133j
    Thermoelectric materials have recently attracted a lot of attention due to their ability to convert waste heat into electricity. Based on the extensive research in this area, the nanostructuring approach has been viewed as an effective strategy for increasing thermoelectric performance. This approach focuses on the formation and growth of the superfine, pure and uniform grain size. Since the grain size has a strong influence on the thermal conductivity, this can be reduced by increasing the phonon scattering at grain boundaries and refining the grain sizes. Therefore, this review aims to discuss the mechanism of reduction in thermal conductivity in small-grain zinc oxide (ZnO) and the optimization techniques for obtaining ZnO nanoparticles with desirably low thermal conductivity and excellent thermoelectric performance.
  8. Atif M, Sulaiman SA, Shafie AA, Babar ZU
    Public Health, 2015 Jun;129(6):777-82.
    PMID: 25999175 DOI: 10.1016/j.puhe.2015.04.010
    BACKGROUND: Despite evidence of an association between tuberculosis (TB) treatment outcomes and the performance of national tuberculosis programmes (NTP), no study to date has rigorously documented the duration of treatment among TB patients. As such, this study was conducted to report the durations of the intensive and continuation phases of TB treatment and their predictors among new smear-positive pulmonary tuberculosis (PTB) patients in Malaysia.
    STUDY DESIGN: Descriptive, non-experimental, follow-up cohort study.
    METHODS: This study was conducted at the Chest Clinic of Penang General Hospital between March 2010 and February 2011. The medical records and TB notification forms of all new smear-positive PTB patients, diagnosed during the study period, were reviewed to obtain sociodemographic and clinical data. Based on standard guidelines, the normal benchmarks for the durations of the intensive and continuation phases of PTB treatment were taken as two and four months, respectively. A patient in whom the clinicians decided to extend the intensive phase of treatment by ≥2 weeks was categorized as a case with a prolonged intensive phase. The same criterion applied for the continuation phase. Multiple logistic regression analysis was performed to find independent factors associated with the duration of TB treatment. Data were analyzed using Predictive Analysis Software Version 19.0.
    RESULTS: Of the 336 patients included in this study, 261 completed the intensive phase of treatment, and 226 completed the continuation phase of treatment. The mean duration of TB treatment (n = 226) was 8.19 (standard deviation 1.65) months. Half (49.4%, 129/261) of the patients completed the intensive phase of treatment in two months, whereas only 37.6% (85/226) of the patients completed the continuation phase of treatment in four months. On multiple logistic regression analysis, being a smoker, being underweight and having a history of cough for ≥4 weeks at TB diagnosis were found to be predictive of a prolonged intensive phase of treatment. Diabetes mellitus and the presence of lung cavities at the start of treatment were the only predictors found for a prolonged continuation phase of treatment.
    CONCLUSIONS: The average durations of the intensive and continuation phases of treatment among PTB patients were longer than the targets recommended by the World Health Organization. As there are no internationally agreed criteria, it was not possible to judge how well the Malaysian NTP performed in terms of managing treatment duration among PTB patients.
    KEYWORDS: Duration of continuation phase; Duration of intensive phase; Duration of tuberculosis treatment; Malaysia; Penang; Smear-positive pulmonary tuberculosis
  9. Chee FT, Harun S, Mohd Daud K, Sulaiman S, Nor Muhammad NA
    Prog Biophys Mol Biol, 2024 Apr 09;189:1-12.
    PMID: 38604435 DOI: 10.1016/j.pbiomolbio.2024.04.002
    Gene regulatory network (GRN) comprises complicated yet intertwined gene-regulator relationships. Understanding the GRN dynamics will unravel the complexity behind the observed gene expressions. Insect gene regulation is often complicated due to their complex life cycles and diverse ecological adaptations. The main interest of this review is to have an update on the current mathematical modelling methods of GRNs to explain insect science. Several popular GRN architecture models are discussed, together with examples of applications in insect science. In the last part of this review, each model is compared from different aspects, including network scalability, computation complexity, robustness to noise and biological relevancy.
  10. Saini S, Zakaria N, Rambli DR, Sulaiman S
    PLoS One, 2015;10(5):e0127833.
    PMID: 25978493 DOI: 10.1371/journal.pone.0127833
    The high-dimensional search space involved in markerless full-body articulated human motion tracking from multiple-views video sequences has led to a number of solutions based on metaheuristics, the most recent form of which is Particle Swarm Optimization (PSO). However, the classical PSO suffers from premature convergence and it is trapped easily into local optima, significantly affecting the tracking accuracy. To overcome these drawbacks, we have developed a method for the problem based on Hierarchical Multi-Swarm Cooperative Particle Swarm Optimization (H-MCPSO). The tracking problem is formulated as a non-linear 34-dimensional function optimization problem where the fitness function quantifies the difference between the observed image and a projection of the model configuration. Both the silhouette and edge likelihoods are used in the fitness function. Experiments using Brown and HumanEva-II dataset demonstrated that H-MCPSO performance is better than two leading alternative approaches-Annealed Particle Filter (APF) and Hierarchical Particle Swarm Optimization (HPSO). Further, the proposed tracking method is capable of automatic initialization and self-recovery from temporary tracking failures. Comprehensive experimental results are presented to support the claims.
  11. Cheong HC, Yap PSX, Chong CW, Cheok YY, Lee CYQ, Tan GMY, et al.
    PLoS One, 2019;14(11):e0224658.
    PMID: 31738795 DOI: 10.1371/journal.pone.0224658
    The cervical microbiota constitutes an important protective barrier against the invasion of pathogenic microorganisms. A disruption of microbiota within the cervical milieu has been suggested to be a driving factor of sexually transmitted infections. These include Chlamydia trachomatis which frequently causes serious reproductive sequelae such as infertility in women. In this study, we profiled the cervical microbial composition of a population of 70 reproductive-age Malaysian women; among which 40 (57.1%) were diagnosed with genital C. trachomatis infection, and 30 (42.8%) without C. trachomatis infection. Our findings showed a distinct compositional difference between the cervical microbiota of C. trachomatis-infected subjects and subjects without C. trachomatis infection. Specifically, significant elevations of mostly strict and facultative anaerobes such as Streptococcus, Megasphaera, Prevotella, and Veillonella in the cervical microbiota of C. trachomatis-positive women were detected. The results from the current study highlights an interaction of C. trachomatis with the environmental microbiome in the endocervical region.
  12. Firdaus-Raih M, Hashim NHF, Bharudin I, Abu Bakar MF, Huang KK, Alias H, et al.
    PLoS One, 2018;13(1):e0189947.
    PMID: 29385175 DOI: 10.1371/journal.pone.0189947
    Extremely low temperatures present various challenges to life that include ice formation and effects on metabolic capacity. Psyhcrophilic microorganisms typically have an array of mechanisms to enable survival in cold temperatures. In this study, we sequenced and analysed the genome of a psychrophilic yeast isolated in the Antarctic region, Glaciozyma antarctica. The genome annotation identified 7857 protein coding sequences. From the genome sequence analysis we were able to identify genes that encoded for proteins known to be associated with cold survival, in addition to annotating genes that are unique to G. antarctica. For genes that are known to be involved in cold adaptation such as anti-freeze proteins (AFPs), our gene expression analysis revealed that they were differentially transcribed over time and in response to different temperatures. This indicated the presence of an array of adaptation systems that can respond to a changing but persistent cold environment. We were also able to validate the activity of all the AFPs annotated where the recombinant AFPs demonstrated anti-freeze capacity. This work is an important foundation for further collective exploration into psychrophilic microbiology where among other potential, the genes unique to this species may represent a pool of novel mechanisms for cold survival.
  13. Ahmad, D., Jamarei, O., Sulaiman, S., Fashina, A.B., Akande, F.B.
    MyJurnal
    The motion resistances of 660 mm pneumatic and rigid bicycle wheels of the same rim diameter were measured experimentally using the developed tractor-towed single non-lug narrow wheel motion resistance test rig for traction studies. The motion resistances measured were taken to be the towing forces determined in real time using Mecmesin Basic Force Gauge (BFG 2500). The test variables included two test surfaces [tilled and wet (mud) surfaces], the dynamic load and the towing velocity. The tyre inflation pressure of 414 kPa was chosen to make the surface synonymous with that of the rigid wheel. Motion resistance ratios of the two wheels were determined empirically and through semi-empirical approach. The motion resistances of the rigid wheel were found to be greater than those of the pneumatic wheel for both surfaces. Consequently, the motion resistance ratios of the rigid wheel were greater than those obtained
    from the pneumatic wheel. Analysis of variance showed that there were significant differences between the means of the motion resistance measured on the test surfaces, as well as between the two wheels and their interactions with the test surfaces. The motion resistance ratio exhibited a linear relationship with the towing velocity, while the relationship with the dynamic load was quadratic. However, such a relationship is either direct or inverse with the respective variables. The motion resistance ratio models for the pneumatic and rigid wheels showed that on different test conditions of the dynamic loads and the towing velocities, the relationships between the motion resistance ratio and the dynamic load, and motion resistance with dynamic load were also different.
  14. Niestanak, S. Abedi, Faieza, A.A., Sulaiman, S., Rosnah, M.Y.
    MyJurnal
    This study of the implementation of enterprise resource planning (ERP) in a customer driven environment analyzes the critical success factors throughout the initialization phase. The dynamic and stochastic nature of customer driven environments results in a massive workload of product structure configuration tasks related to new arrivals on one hand and a constant updating process on the other. Meanwhile, the development and implementation of an ERP system was studied from the very first step (i.e. the feasibly study for implementing an ERP) to the last step (i.e. testing the outputs of the implemented system) in an office furniture company for three years. The study involved analyzing of the data collected that were from a series of interviews, as well as direct observations and reviewing of the company’s documents. Based on the output of the analysis phase, a top-down hierarchical analysis of goals and CSFs were carried out according to the CSF analysis method. Three top level objectives included reducing project failure risk, project cost, and project time. Analysing the primary results of the study (i.e. activity model, data flow diagram DFD of different levels, system problems and potential solutions descriptions, etc.) revealed that the critical phase of the implementation project would be product structure initialization and this should be taken into consideration as the bottleneck of production planning in customer driven environment, which dramatically reduced the ERP efficiency in this kind of environment. Moreover, initializing issues of the same process is the main obstacle to the success of the ERP implementation, as it considerably raises the project failure risk and cost. Therefore, the simplification, facilitation, and automation of the PSCM process, which lead to acceleration of this process, are the most significant success factors for the ERP implementation projects in customer driven environment.
  15. Ishak IH, Kamgang B, Ibrahim SS, Riveron JM, Irving H, Wondji CS
    PLoS Negl Trop Dis, 2017 01;11(1):e0005302.
    PMID: 28114328 DOI: 10.1371/journal.pntd.0005302
    BACKGROUND: Dengue control and prevention rely heavily on insecticide-based interventions. However, insecticide resistance in the dengue vector Aedes aegypti, threatens the continued effectiveness of these tools. The molecular basis of the resistance remains uncharacterised in many endemic countries including Malaysia, preventing the design of evidence-based resistance management. Here, we investigated the underlying molecular basis of multiple insecticide resistance in Ae. aegypti populations across Malaysia detecting the major genes driving the metabolic resistance.

    METHODOLOGY/PRINCIPAL FINDINGS: Genome-wide microarray-based transcription analysis was carried out to detect the genes associated with metabolic resistance in these populations. Comparisons of the susceptible New Orleans strain to three non-exposed multiple insecticide resistant field strains; Penang, Kuala Lumpur and Kota Bharu detected 2605, 1480 and 425 differentially expressed transcripts respectively (fold-change>2 and p-value ≤ 0.05). 204 genes were commonly over-expressed with monooxygenase P450 genes (CYP9J27, CYP6CB1, CYP9J26 and CYP9M4) consistently the most up-regulated detoxification genes in all populations, indicating that they possibly play an important role in the resistance. In addition, glutathione S-transferases, carboxylesterases and other gene families commonly associated with insecticide resistance were also over-expressed. Gene Ontology (GO) enrichment analysis indicated an over-representation of GO terms linked to resistance such as monooxygenases, carboxylesterases, glutathione S-transferases and heme-binding. Polymorphism analysis of CYP9J27 sequences revealed a high level of polymorphism (except in Joho Bharu), suggesting a limited directional selection on this gene. In silico analysis of CYP9J27 activity through modelling and docking simulations suggested that this gene is involved in the multiple resistance in Malaysian populations as it is predicted to metabolise pyrethroids, DDT and bendiocarb.

    CONCLUSION/SIGNIFICANCE: The predominant over-expression of cytochrome P450s suggests that synergist-based (PBO) control tools could be utilised to improve control of this major dengue vector across Malaysia.

  16. Abdulameer SA, Syed Sulaiman SA, Hassali MA, Subramaniam K, Sahib MN
    Osteoporos Int, 2013 Mar;24(3):929-40.
    PMID: 22790611 DOI: 10.1007/s00198-012-2071-1
    In type 2 diabetic patients (T2DM), only 22 % have normal bone mineral density and almost three quarters of the sample population had low self-efficacy towards osteoporosis. These results reflect the need for screening and educational programs to increase the awareness of T2DM towards osteoporosis.
    INTRODUCTION: Our aim was to translate and examine the psychometric properties of the Malay version of the osteoporosis self-efficacy scale (OSES-M) among T2DM and to determine the best cut-off value with optimum sensitivity and specificity. In addition, to assess factors that affects diabetic patients' osteoporosis self-efficacy.
    METHODS: A standard "forward-backward" procedure was used to translate the OSES into Malay language, which was then validated with a convenience sample of 250 T2DM. The sensitivity and specificity of the OSES-M was calculated using receiver operating characteristic curve analysis. Bivariate and multivariate approaches were used to examine multiple independent variables on each dependent variable.
    RESULTS: The mean score of OSES-M was 731.74 ± 197.15. Fleiss' kappa, content validity ratio range, and content validity index were 0.99, 0.75-1, and 0.96, respectively. Two factors were extracted from exploratory factor analysis and were confirmed through confirmatory factor analysis. Internal consistency and test-retest reliability were 0.92 and 0.86, respectively. The optimum cut-off point of OSES-M to predict osteoporosis/osteopenia was 858. Regression analysis revealed that knowledge, health belief, and some demographic data had an impact on OSES-M.
    CONCLUSIONS: The results show that the OSES-M is a reliable and valid instrument for measuring osteoporosis self-efficacy in the Malaysian clinical setting.
  17. Destiani DP, Naja S, Dewi S, Rahmadi AR, Sulaiman SAS, Abdulah R
    Osteoporos Int, 2021 May;32(5):805-816.
    PMID: 33210179 DOI: 10.1007/s00198-020-05743-z
    Even though new drugs for the treatment of rheumatoid arthritis (RA) have been developed, methotrexate (MTX) remains a commonly used drug for RA management. In addition to monitoring disease activity during RA treatment, bone erosion should be closely assessed throughout long-term RA management. In this review article, we present a systematic review of MTX effectiveness in reducing the risk of bone erosion. We reviewed randomized controlled trial studies that involved MTX monotherapy or MTX in combination with placebo. Evaluation of the progression of bone erosion was examined by radiographic assessment such as total Sharp score (TSS) or van der Heijde score (SvdH or vdH TSS), joint space narrowing (JSN), erosion score (ERO), and proportion of radiographic nonprogressors. Several key factors were found to influence the response to MTX treatment, such as gene polymorphism. The exact mechanism of the prevention of bone erosion by MTX remains unclear, which warrants future investigations. The variability of RA disease activity in study subjects resulted in variations in the results reported by individual studies. Collective analysis suggests that MTX could slow down the progression of bone erosion based on a radiographic score of less than 0.5-1/year.
  18. Tan PC, Soe MZ, Sulaiman S, Omar SZ
    Obstet Gynecol, 2013 Feb;121(2 Pt 1):253-259.
    PMID: 23344273 DOI: 10.1097/AOG.0b013e31827e7fd9
    OBJECTIVE: To compare immediate with delayed (4 hours) oxytocin infusion after amniotomy on vaginal delivery within 12 hours and patient satisfaction with the birth process.

    METHODS: Parous women with favorable cervixes after amniotomy for labor induction were randomized to immediate titrated oxytocin or placebo intravenous infusion in a double-blind noninferiority trial. After 4 hours, study infusions were stopped, the women were assessed, and open-label oxytocin was started if required. Maternal satisfaction with the birth process was assessed with a 10-point visual numerical rating scale (lower score, greater satisfaction).

    RESULTS: Vaginal delivery rates at 12 hours were 91 of 96 (94.8%) compared with 91 of 94 (96.8%) (relative risk 0.98, 95% confidence interval [CI] 0.92-1.04, P=.72), and maternal satisfaction on a visual numerical rating scale (median [interquartile range]) was 3 [3-4] compared with 3 [3-5], P=.36 for immediate compared with delayed arm, respectively). Cesarean delivery, maternal fever, postpartum hemorrhage, uterine hyperactivity, and adverse neonatal outcome rates were similar between arms. The immediate oxytocin arm had a shorter amniotomy-to-delivery interval of 5.3±3.1 compared with 6.9±2.9 hours (P

  19. Salleh RM, Kuan G, Aziz MNA, Rahim MRA, Rahayu T, Sulaiman S, et al.
    Nutrients, 2021 May 24;13(6).
    PMID: 34073684 DOI: 10.3390/nu13061783
    BACKGROUND: Reports of probiotic consumption on athletes' performance are debatable due to their equivocal results. There is a need for more evidence on the effects of probiotic intake on psychological state and fitness level. Thus, this study determined the effects of daily probiotic consumption on competitive anxiety, perceived stress and mood among university badminton players, besides their fitness like aerobic capacity, strength, speed, leg power and agility.

    METHODS: Thirty university badminton players aged from 19 to 22 years old were randomly divided equally into two groups, where the probiotic group (PG; n = 15) received a drink that contained Lactobacillus casei Shirota (3 × 1010 CFU) and placebo group (CG; n = 15) a placebo drink for six weeks. Anxiety, stress and mood levels were determined using the CSAI-2R, PSS and BRUMS questionnaires, respectively. Fitness levels were measured using by subjecting the players to 20-m shuttle runs (aerobic capacity), handgrips (muscular strength), vertical jumps (leg power), 40-m dash (speed) and T-test (agility). The Student's t-test (p < 0.05) was used to determine the differences between PG and CG players.

    RESULTS: After six weeks, the anxiety and stress levels of PG players significantly decreased by 16% (p < 0.001) and 20% (p < 0.001), respectively, but there were no significant changes detected in CG players. Supplementation of probiotics also improved aerobic capacity in PG players by 5.9% (p < 0.001) but did not influence the speed, strength, leg power and agility.

    CONCLUSIONS: Probiotics supplementation showed improved aerobic capacity and relieve anxiety and stress. However, further studies need to be carried out to determine the mechanisms through which probiotic intake produces these effects.

  20. Azis RS, Sulaiman S, Ibrahim IR, Zakaria A, Hassan J, Muda NNC, et al.
    Nanoscale Res Lett, 2018 May 23;13(1):160.
    PMID: 29796949 DOI: 10.1186/s11671-018-2562-x
    Synthesis of nanocrystalline strontium ferrite (SrFe12O19) via sol-gel is sensitive to its modification parameters. Therefore, in this study, an attempt of regulating the pH as a sol-gel modification parameter during preparation of SrFe12O19 nanoparticles sintered at a low sintering temperature of 900 °C has been presented. The relationship of varying pH (pH 0 to 8) on structural, microstructures, and magnetic behaviors of SrFe12O19 nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning microscope (FESEM), and vibrating sample magnetometer (VSM). Varying the pH of precursor exhibited a strong effect on the sintered density, crystal structure and magnetic properties of the SrFe12O19 nanoparticles. As the pH is 0, the SrFe12O19 produced relatively largest density, saturation magnetization, Ms, and coercivity, Hc, at a low sintering temperature of 900 °C. The grain size of SrFe12O19 is obtained in the range of 73.6 to 133.3 nm. The porosity of the sample affected the density and the magnetic properties of the SrFe12O19 ferrite. It is suggested that the low-temperature sintered SrFe12O19 at pH 0 displayed Ms of 44.19 emu/g and Hc of 6403.6 Oe, possessing a significant potential for applying in low-temperature co-fired ceramic permanent magnet.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links