A chemical modifier (acrylic acid) was used to improve the thermal properties of polypropylene/ ethylene propylene diene terpolymer/calcium carbonate (PP/EPDM/CaCO3) composites. Treated
and untreated PP/EPDM composites were filled by CaCO3 at 0, 20 and 40% wt. The composites
were prepared using Z-blade mixer machine at 180oC and 50 rpm of rotor speed. Thermogravimetric
analysis (TGA) and differential scanning calorimetry (DSC) methods were used to analyze the thermal properties of the composites. Thermogravimetric analysis indicated that the total weight loss of PP/EPDM/CaCO3 composites decreased with the increasing filler loading for the treated and untreated composites. Meanwhile, the presence of acrylic acid was found to have increased the thermal stability and crystallinity of PP/EPDM/CaCO3
.
This paper studied the thermal behaviour of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composite. Thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) analysis were used to measure the thermal characteristic of HIPS/PALF composites. In particular, the TGA analysis was utilized to measure the degradation and decomposition of materials in neat polystyrene, pineapple fibre, and the composites. The measurements were carried out in the temperature of 25°C – 800°C, at a heating rate of 20°C min-1 and the nitrogen gas flow was 50 mL min-1. The temperature of the DSC analysis was programmed to be between 25°C – 300°C. The results from TGA analysis show that the addition of pineapple fibre has improved the thermal stability of the composites as compared to neat HIPS. In addition, the effects of compatibilising agent and surface modification of PALF with alkali treated were also determined and compared.
Reclaimed rubber from rejected natural rubber (NR) latex gloves (r-NRG) was evaluated as partial
replacement for Standard Malaysian Rubber (SMR) 20 in producing microcellular rubber. In the study, the amount of reclaimed rubber varied from 20 pphr to 95 pphr for the purpose of cost reduction, environmental interest and as processing aids in reducing internal porosity, swells and to minimize shrinkage and air-trapped problems in producing microcellular rubber. A typical formulation in making microcellular rubber slab was developed and two-roll mill was used for compounding. The cure characteristics and mechanical properties, such as density, hardness, tensile strength, and elongation at break, were evaluated. Scorch time and cure rate index performed marginal decreased with increasing of r-NRG content. 95 pphr r-NRG blends showed a consequential drop in hardness. Both tensile properties and elongation at break decreased as the r-NRG content was increased.
The fracture behaviour represents the most critical issue in the automotive and aerospace engine fields. Thus, the objective of this study was to estimate and analyze the crack criteria by using the
Mathematical laws that were limited in E 1820 standard and the results affirmed by applying the numerical solutions of ANSYS to estimate the fracture toughness value KIC, besides the energy release rate of biomass composite. The specimens were prepared from different percentage of kenaf mat (KM) and unsaturated polyester resin (UP) 20% KM – 80% UP and 40% KM – 60% UP, respectively, as well the other composite properties which were calculated using the stress-strain data. The fracture characterizations of this composite were carried out using the compact tension (CT) specimen that was commonly used to determine Mode-I fracture properties. The fracture toughness has been found to be independent of pre-crack length. Meanwhile, the tests were performed at room temperature. The numerical simulations of the ANSYS model results demonstrated a good agreement between the experiments computed results of the fracture toughness. The fracture toughness KIC of 20% KM – 80% UP and 40% KM – 60% UP was equivalent to 0.76 MPa√m and 2.0 MPa√m, respectively. Thus, the fracture propagation is dependent on the fibre percentage of the composite. On the other hand, there are unlimited mechanisms of crack paths derived from randomly kenaf mat packs, particularly in the frontal process zone of crack tip.
Linear density polyethylene (LDPE)/thermoplastic sago starch (TPSS), blended with and without the addition of compatibilizer [Polyethylene-grafted-Maleic Anhydride, (PE-g-MA)] were prepared for soil burial test. The test was conducted in the natural soil environment for 3 and 6 months. Different loading of TPSS (10, 20, 30, 40, and 50 wt. %) were used in this study. After soil burial, the blends were evaluated for their tensile properties and scanning electron microscopy (SEM) to observe the surface morphology properties after the test. For LDPE/TPSS, it was observed that the tensile strength decreased with the increase of soil burial time, as well as Young modulus and elongation at break (EB). The LDPE/TPSS/PE-g-MA also showed the same trend for the tensile properties, but with higher properties as compared to uncompatibilized blends. The tensile properties also decreased with the increase in the TPSS loading for both the LDPE/TPSS and LDPE/TPSS/PE-g-MA. Meanwhile,
the scanning electron microscopy (SEM) on the blend surfaces after the soil burial test showed that degradability increased with the increase in the exposure time as well as the TPSS loading.
Maintenance is a vital system in a manufacturing company. The maintenance objectives are to ensure that the machine is in good condition, serviceable and safe to be operated in producing quality products. However, the system usually imposes a high cost system due to its ineffective activities. Therefore, this paper was written to review the factors affecting the maintenance effectiveness and methods used to measure its performance. In this paper, maintenance performance measurement methods are categorized into three groups, based on holistic, machine, and value factors. Each group is discussed based on the principles and techniques of the maintenance performance measurement methods, along with the example of its applications in the industry. The most common methods used are the holistic approach, overall equipment effectiveness (OEE), and balance score-card (BSC). These various methods have their own benefits and drawbacks, according to the area of measurement.
One of the most interesting water management case studies in Iran is the case of Zayandehrud River, the main river that supplies water to Isfahan Province which is located in Gavkhuni River Basin (GRB). This paper examines the present and future demands for water and determines the extent to which water will be available for agricultural use by the year 2020. Although demand and supply conditions in 2000 were more or less in balance, there was an increase in the supply of some 28% by 2010 due to the completion of the third trans-basin diversion and the development of other local water sources. However, the demand exceeded its supply in 2010 and the basin fell into severe deficit. In this condition, the only way to keep supply and demand in balance is to reduce allocations to agriculture. By 2020, agriculture would only have 5% more water than the present and water supply is only 90% that of the normal, and this would then shrink from 2025 onwards. In other words, agriculture would have to be sacrificed in order to ensure full supplies of water for the other sectors. The scenarios examined reveal that a sustainable agriculture can only be accomplished by water saving practices and management measures, which may further lead to reduced demand, control supplies, and improve the efficiency of water use.
Malaysia is a tropical country and it is subjected to flooding in both the urban and rural areas. Flood
modelling can help to reduce the impacts of flood hazard by taking extra precautions. HEC-RAS model was used to predict the flood levels at selected reach of the Langat River with a total length of 34.4 km. The Langat River is located in the state of Selangor, Malaysia and it is subjected to regular flooding. The selected reach of the Langat River has insufficient data and a methodology was proposed to overcome this particular problem. Since complete floodplain data for the area are not available, the modelling therefore assumed vertical walls at the left and right banks of the Langat River and all the predicted flood levels above the banks were based on this assumption. The HECRAS model was calibrated and the values of Manning’s coefficients of roughness for the Langat River were found to range from 0.04 to 0.10. The discharge values were calculated for 5, 10, 25, 50, and 100 year return periods and the maximum predicted flood depth ranged from 2.1m to 7.8m. Meanwhile, the model output was verified using the historical record and the error between the recorded and predicted water levels was found to range from 3% to 15%.
Shotcrete is a process where concrete is projected or “shot” under pressure, using a feeder or a
“gun” onto a surface to form structural shapes including walls, floors, and roofs. The surface can
be wood, steel, polystyrene, or any other surfaces that concrete can be projected onto. The surface
can be trowel led smooth while the concrete is still wet. Shotcrete has high strength, durability, low
permeability, excellent bond, and limitless shape possibilities. These properties allow shotcrete
to be used as a structural material in most cases. Although the hardened properties of shotcrete
are similar to conventional cast-in-place concrete, the nature of the placement process provides
additional benefits, such as excellent bond with most substrates and instant or rapid capabilities,
particularly on complex forms or shapes. In addition to building homes, shotcrete can also be used
to build pools. The practice of underground tunneling shows that the degree of stability of tunnels
is dependent on the state of the soil, rock mass, and shotcrete around the tunnel contour. The
development in the urban or suburban areas leads to the construction of tunnels in all kinds of soil
and rock. Meanwhile, the construction of tunnels in shallow depth or soft soils causes the ground
to displace. The determination of soil and rock mechanical properties to assess the stability of New
Austrian Tunnelling Method (NATM) tunnels and design the support system is one of the most
important steps in tunnelling. This paper provides information pertaining to the safety and increase
the stability of NATM tunnel before, during and after the operation of the tunnel. Therefore, the
shotcrete process is a recognized method for cemented sandy silt stabilization, with the aid of high
pressure shot concrete to increase the stability of tunnels.
Microinjection is a powerful tool to deliver various substances, such as nucleic acids, proteins, peptides, RNA, and synthetic molecules into mammalian cells mechanically. Through microinjection, a controlled amount of protein can be delivered into the target cells to elucidate the specific functional
effects in vitro. In this study, a series of protein microinjection optimization was performed in human breast cancer cells. The presence of Maltose Binding Protein (MBP) was microscopically monitored through indirect immunofluorescence assay. The optimization experimentation gave a high success rate when MBP protein was used at the minimum concentration of 1.5 mg/ml and at the injection pressures of 50 and 70 hPa. The average success rate of injections was 49.2±4.15% and 50.8±4.6%, while the average cell survivability was 50.98±4.67% and 49.72±5.48% at 50 and 70 hPa, respectively. The optimization of the MBP concentration and injection pressures successfully allowed an efficient delivery of precise protein dosage into breast cancer cells without any adverse effect. This microinjection optimization can be a practical guideline in any downstream applications of protein functional work.
Setting a question paper for test, quiz, and examination is one of the teachers’ tasks. The factors that are usually taken into consideration in carrying out this particular task are the level of difficulty of the questions and the level of the students’ ability. In addition, teachers will also have to consider the number of questions that have impact on the examination. This research describes a model-based test theory to study the confidence intervals for the projected number of items of a test, given the reliability of the test, the difficulty of the question, and the students’ ability. Using the simulated data, the confidence intervals of the projected number of items were examined. The probability coverage and the length of the confidence interval were also used to evaluate the confidence intervals. The results showed that the data with a normal distribution, the ratio variance components of 4:1:5 and reliability equal to 0.80 gave the best confidence interval for the projected number of items.
The physical strength of the elderly aged above 60 years is typically 10 to 30% less than the young adult population of ages between 25 to 35 years. This reduction of strength has a strong impact on the activity of the daily living (ADL) of the elderly population. There has been little research done studying on the physical strength of the elderly population in Malaysia. The objective of this study was to determine the static strength of the elderly population in Malaysia. In particular, the grip and pinch strength were investigated as these two static strengths are extensively used in their instrumental activity of daily living (IADL). The results were then compared to the strength of the university students. A total of 30 subjects (15 males and 15 females) participated in the study. Their age ranged between 60 to 83 years, with the mean of age of 67.1 years. The comparison group comprised a total of 30 university students (20 male, 10 female) aged between 23 to 24 years, with the mean of age of 23.2 years. Grip and pinch strengths of both groups were measured and analysed using a descriptive statistics. It was found that the elderly male subjects are stronger in both strength measurements than their female counterpart. The 95th percentile of the female grip strength was slightly lower than that of the male while the male pinch strength was 31.07% higher. It was also found that the male students had higher strengths compared to the females. The grip strength of the elderly was 30.66% lower than the university student, while their pinch strength was 13.42% lower. Both static strengths of the elderly were found to be lower than those of the university students. This supported the research hypotheses postulating that the static strength had a negative correlation with age. In terms of gender differences, the male subjects were found to be stronger than the females.
In this research wok, three different techniques of change detection were used to detect changes in forest areas. One of the techniques used a local similarity measure approach to detect changes. This new approach of change detection technique, which used mutual information to measure the similarity between two multi-temporal images, was developed based on correspondence of the pixel values, rather than the difference in their intensity. Pixels suffering any changes will be maximally dissimilar. The study was conducted using multi-temporal SPOT 5 satellite images, with the resolution of 10 m x10 m on 5th August 2005 and 13th June 2007. The experimental results show that local mutual information provides more reliable results in detecting changes of the multitemporal images containing different lighting condition compared to the image differencing and NDVI technique, specifically in areas with less plant growth. In addition, it can also overcome the problem on selecting the threshold value. Besides, the findings of this study have also shown that band 3, which is sensitive to vegetation biomass, gave the best result in detecting area of changes compared to the others.
This paper reports an alternative method for making glass-ceramic from disposal waste water
sludge and soda lime silica (SLS) glass. The glass ceramic samples were prepared from a mixture
of wastewater sludge and SLS glasses, melted at 1375°C for 3 hours and quenched by pouring into
water to obtain a coarse frit. The frit glass was then crushed and sieved to 106μm before it was
pressed to a pellet. The sintering process was performed at various temperatures between 700-
1000°C for 2 hours and morphologically characterized with XRD, SEM, and EDX. Overall results
showed the crystalline phase of diopside sodian-critobalite glass-ceramic is depending on thermal
treatment process and making them attractive to industrial uses such as in construction, tiling, and
glass-ceramic applications.
This paper describes the design and development of harvesting system for the gantry system to harvest eggplants. For this purpose, the harvesting robot was successfully designed and fabricated for the gantry system to harvest eggplants. The operation of the harvester was controlled by Programmable Logic Controller (PLC). Basically, the limit switches, DC motor, and relay are connected to the PLC. Meanwhile, a PLC ladder diagram was designed and developed to control the operation of the eggplant harvester. A visual basic programme was developed to interface the harvester with a greenhouse gantry control system. A videogrammetry method was employed to calculate the distance between the stems of eggplants and the cutter of robot end effector. The end effector used electric as its power source and it was controlled via Programmable Logic Controller (PLC). Visual Basic Programme was developed to interface the harvester with the gantry control system. The accuracy of the videogrammetry was tested to be 67.2% for X-axis, 88.2% for Y-axis and 84.7% for Z-axis. Meanwhile, the speed of the end effector for harvester is 2.4 km/h and it could lift up to 55 cm. In order to determine detachment force of eggplant, 16 samples of mature eggplants were tested in a greenhouse, and as a result, more than 22.76 N force was needed to detach a mature eggplant inside the gantry system.
The growth performance of Indian major carp (Catla catla, Ham.) was assessed over a period of six months through formulated feeds consisting of three seaweeds, namely Chlorodesmis fastigiata, Padina tetrastomatica and Stoechospermum marginatum. A relatively slow average growth rate (6.48 g/month) in fishes was observed in the control group. Meanwhile, the maximum and rapid growth rate (13.38 g/month) was observed with Feed-A supplemented with C. fastigiata. Similarly, a comparable growth rate was also observed with Feed-B (11.56 g/month) with P. tetrastomatica. However, the growth rate in fishes was relatively lower (9.05 g/month) with Feed-C containing seaweed S.marginatum. The growth rate in each month was also compared. The maximum attainable growth rate was found to be 12 g in the control group, whereas this was 30 g with Feed-A. The attainable growth was 20 g and 15 g with Feed-B and Feed-C, respectively. In the control group, the maximum increments in weight was recorded in the third (September) and fifth (November) months of rearing, and the increment was considerably reduced after that. The maximum increment in weight was in the second month (August) with Feed-A, and this was followed by a considerable decrease in subsequent months. A similar trend was observed with Feed-B and Feed-C. The biochemical composition of all the four feeds used in the present study showed approximately the same protein (0.45-0.50 mg/ ml) and lipid contents (0.6 mg/ml). Carbohydrate was the only parameter which showed a relatively significant effect (p
The extract of Cinnamomum microphyllum showed strong antioxidant activity when it was tested against auto-oxidation of linoleic acid, superoxide, and DPPH radical scavenging activity. Further detailed investigations of the plant constituents and bioactivity studies led to the isolation and identification of known compounds consisting of three lignans, a coumarin, an ester and β-sitosterol. The structures of the compounds were determined using detailed spectroscopic analysis. The lignans were found to possess a significant antioxidant activity when tested against the three assay systems.
Activin proteins are members of the transforming growth factor-β family. Activin A is involved in several biological responses including wound repair, cell death, proliferation and differentiation of many cell types. Biologically active activins consist of homodimers or heterodimers of two beta (β) subunits that are linked together by a single covalent disulphide bond. The subunits in humans are βA, βB, βC and βE. As an example, a combination of two βA subunits will produce a unit of activin A. These proteins are found in most cells of body such as macrophage and activated circulating monocytes. Their role in inflammation can be categorised into two types, either pro- or anti-inflammatory agents, depending on the cell type and phase. Activin signals are kept in balance by antagonist follistatin (Fst), which is a glycoprotein expressed in tissues and encoded by the follistatin gene in humans.
This paper presents an overview topic of layered and laminated fibre composites. The review presents an investigation on the effect of varying the properties of fibre and the matrix of layered and laminated composites and identifies the fundamental parameters determining ballistic impact protection. The advantages of layered and laminated reinforced composites with different thicknesses for further enhancing ballistic penetration resistance of the laminated fibre composite have been reviewed. Lamination of multiple layers of composite material can give better ballistic performance.
A shift to administration of optimal dose of 18F-FDG between 4 and 5 MBq/kg from the current practice of higher doses potentially yields a reasonable-to-excellent PET image. For this purpose, whole-body MIP images of 32 patients (23 men, 9 women, age 51.9 ± 13.7 years), administered with 18F-FDG (activity 5.3 ± 0.5 MBq/kg, 45 minutes uptake time) for whole-body PET/CT examinations, were evaluated. Image quality was assessed visually by two radiologists using a three-point scoring scale: poor, reasonable and excellent. The interobserver agreement revealed a kappa value higher than 0.7. Therefore, the utilisation of 18F-FDG dose between 4 and 5MBq/kg is considered an optimum dose for whole-body PET/CT examination.