Aflatoxins (AFs) are secondary metabolites produced by aflatoxigenic strains of Aspergillus flavus and A. parasiticus, the most toxic being aflatoxin B1 (AFB1). The purpose of the present work was to investigate the effects of industrial-grade packaging materials (low-density polyethylene, polypropylene, polyethylene-laminated aluminium); temperatures (25 °C, 30 °C); and water activities (0.74 a w, 0.85 a w) on AFB1 production by A. flavus and A. parasiticus in stored peanut kernels. Commercially-obtained samples were segregated into packaging materials, separately inoculated with the aflatoxigenic Aspergillus spp., and stored for 1 month under various °C + a w regimes. AFB1 production was quantified by high performance liquid chromatography with fluorescence detector (HPLC-FLD). For A. flavus in PELA, no AFB1 was detected (100% reduction) at 25 °C for both a w tested. For A. parasiticus in PELA, no AFB1 was detected at 25 °C (0.85 a w) and 30 °C (0.74 a w). Highest concentration of AFB1 was detected in LDPE for both A. flavus (46.41 ppb) and A. parasiticus (414.42 ppb), followed by PP (A. flavus 24.29 ppb; A. parasiticus 386.73 ppb). In conclusion, storing peanut kernels in PELA in a dry place at room temperature has been demonstrated as an adequate and inexpensive method in inhibiting growth of Aspergillus spp. and lowering AFB1 contamination in peanuts.
This study aims to investigate the effect of different vegetable oils and frying cycles on acrylamide formation during the intermittent frying of beef nuggets. Different vegetable oils, palm olein (PO), red palm olein (RPO), sunflower oil (SFO), and soybean oil (SBO), were used for a total of 80 frying cycles. Oil was collected at every 16th frying cycle and analyzed for peroxide value (PV), p-anisidine value (p-AV), free fatty acid (FFA), total polar compound (TPC), polar compound fractions, and fatty acid composition (FAC). Total oxidation (TOTOX) value was calculated, and acrylamide content was quantified in the nuggets. Regardless of the oil type, PV, p-AV, and TOTOX initially increased but gradually decreased. However, FFA and TPC continued to develop across the 80 frying cycles. The C18:2/C16:0 remained almost unchanged in PO and RPO but dropped progressively in SFO and SBO. The lowest acrylamide content in fried products was observed in the PO, while the highest content was observed in RPO. Bivariate correlation analysis showed no significant (p ≤ 0.05) correlation between oil quality attributes and acrylamide concentration. The oil type but not the frying cycle significantly affected the acrylamide concentration in beef nuggets.
Aflatoxin contamination in foods is a global concern as they are carcinogenic, teratogenic and mutagenic compounds. The aflatoxin-producing fungi, mainly from the Aspergillus section Flavi, are ubiquitous in nature and readily contaminate various food commodities, thereby affecting human's health. The incidence of aflatoxigenic Aspergillus spp. and aflatoxins in various types of food, especially raw peanuts and peanut-based products along the supply chain has been a concern particularly in countries having tropical and sub-tropical climate, including Malaysia. These climatic conditions naturally support the growth of Aspergillus section Flavi, especially A. flavus, particularly when raw peanuts and peanut-based products are stored under inappropriate conditions. Peanut supply chain generally consists of several major stakeholders which include the producers, collectors, exporters, importers, manufacturers, retailers and finally, the consumers. A thorough examination of the processes along the supply chain reveals that Aspergillus section Flavi and aflatoxins could occur at any step along the chain, from farm to table. Thus, this review aims to give an overview on the prevalence of Aspergillus section Flavi and the occurrence of aflatoxins in raw peanuts and peanut-based products, the impact of aflatoxins on global trade, and aflatoxin management in peanuts with a special focus on peanut supply chain in Malaysia. Furthermore, aflatoxin detection and quantification methods as well as the identification of Aspergillus section Flavi are also reviewed herein. This review could help to shed light to the researchers, peanut stakeholders and consumers on the risk of aflatoxin contamination in peanuts along the supply chain.
Two hundred ten samples of selected vegetables (okra, pumpkin, tomato, potato, eggplant, spinach, and cabbage) from Faisalabad, Pakistan, were analyzed for the analysis of heavy metals: cadmium (Cd), lead (Pb), arsenic (As), and mercury (Hg). Inductively coupled plasma optical emission spectrometry was used for the analysis of heavy metals. The mean levels of Cd, Pb, As, and Hg were 0.24, 2.23, 0.58, and 7.98 mg/kg, respectively. The samples with Cd (27%), Pb (50%), and Hg (63%) exceeded the maximum residual levels set by the European Commission. The mean levels of heavy metals found in the current study are high and may pose significant health concerns for consumers. Furthermore, considerable attention should be paid to implement comprehensive monitoring and regulations.
This work presents current information on the presence of aflatoxins (AFs) and zearalenone (ZEN) in feed and feed ingredients from Punjab, Pakistan. The 105 samples tested were concentrated feed, i.e., cotton seed meal (18 samples) and soybean meal (14), and feed ingredients, i.e., crushed corn (17), crushed wheat (15), barley (17). and poultry feed (24). Samples were analyzed using high-performance liquid chromatography equipped with a fluorescence detector. Analysis revealed that 69 of 105 samples were contaminated with AFs, and the highest mean concentrations of AFB1 (6.20 μg/kg) and total AFs (9.30 μg/kg) were found in poultry feed samples. The mean total AF concentrations ranged from the limit of quantification to 165.5 μg/kg. However, 75 of the 105 samples were positive for ZEN. The highest mean concentration (19.45 μg/kg) was found in poultry feed samples. The mean ZEN concentrations were 0.15 to 145.30 μg/kg. The prevalence of AFs and ZEN was high in feed and feed ingredients and needs urgent attention.
Aspergillus flavus is the predominant species that produce aflatoxins in stored peanuts under favourable conditions. This study aimed to describe the growth and aflatoxin production by two A. flavus strains isolated from imported raw peanuts and to model the effects of temperature and aw on their colony growth rate as a function of temperature and aw in Peanut Meal Extract Agar (PMEA). A full factorial design with seven aw levels (0.85-0.98 aw) and five temperature levels (20-40 °C) was used to investigate the growth and aflatoxin production. Colony diameter was measured daily for 28 days while AFB1 and total aflatoxin were determined on day 3, 7, 14, and 21. The maximum colony growth rate, μmax (mm/day) was estimated by using the primary model of Baranyi, and the μmax was then fitted to the secondary model; second-order polynomial and linear Arrhenius-Davey to describe the colony growth rate as a function of temperature and aw. The results indicated that both strains failed to grow at temperature of 20 °C with aw <0.94 and aw of 0.85 for all temperatures except 30 °C. The highest growth rate was observed at 30 °C, with 0.98 aw for both strains. The analysis of variance showed a significant effect of strain, temperature, and aw on the fungal growth and aflatoxin production (p
Fruits are important food commodities that can be consumed either raw or processed and are valued for their taste, nutrients, and healthy compounds. Mangifera pajang Kosterm (bambangan) is an underutilized fruit found in Malaysia (Sabah and Sarawak), Brunei, and Indonesia (Kalimantan). It is highly fibrous and juicy with an aromatic flavour and strong smell. In recent years, bambangan fruit has been gaining more attention due to its high fibre, carotenoid content, antioxidant properties, phytochemicals, and medicinal usages. Therefore, the production, trade, and consumption of bambangan fruit could be increased significantly, both domestically and internationally, because of its nutritional value. The identification and quantification of bioactive compounds in bambangan fruit has led to considerable interest among scientists. Bambangan fruit and its waste, especially its seeds and peels, are considered cheap sources of valuable food and are considered nutraceutical ingredients that could be used to prevent various diseases. The use of bambangan fruit waste co-products for the production of bioactive components is an important step towards sustainable development. This is an updated report on the nutritional composition and health-promoting phytochemicals of bambangan fruit and its co-products that explores their potential utilization. This review reveals that bambangan fruit and its co-products could be used as ingredients of dietary fibre powder or could be incorporated into food products (biscuits and macaroni) to enhance their nutraceutical properties.
Bioactive compounds from plant sources are generally categorized as natural antioxidants with well-known health benefits. The health-promoting characteristics of natural antioxidants include anti-inflammatory, anti-diabetic, and hepatic effects as well as free radical scavenging. Herein, a comprehensive and comparative review are presented about the effects of conventional (thermal and mechanical) and relatively new (non-thermal) processing methods on phytochemicals and discussed the importance of implementing the use of those methods that could be of very helpful retaining the quality of the bioactive compounds in plant-based foods. Plant-based foods rich in phenolics, vitamin C, carotenoids, and other compounds undergo a range of processing operations before they are consumed. Most of these methods involve thermal treatments of fruits, stems, leaves, and roots. These techniques have varying effects on bioactive compounds and their activities, and the magnitude of these effects depends on process parameters such as temperature, time, and the food matrix. Thermal processing can be detrimental to bioactive compounds while nonthermal procedures may not cause significant deterioration of important health-promoting phytochemicals and in some cases can improve their bio-activity and bio-availability. The detrimental effects of conventional processing on the quality of natural antioxidants have been compared to the effects of innovative nonthermal food treatments such as gamma and ultraviolet irradiation, ultraviolet light, pulsed electric fields, and high hydrostatic pressure.
An electrochemical aptasensor is described for determination of the phytohormone of zearalenone (ZEA). The gold electrode was modified with ZEA via covalent attachment using cysteamine-hydrochloride and 1,4-phenylene diisocyanate linker. A truncated ZEA aptamer with a dissociation constant of 13.4 ± 2.1 nM was used in an aptasensor. The electrochemical property was investigated using square wave voltammetry for monitoring the change in the electron transfer using the ferro/ferricyanide system as redox probe. Under optimal experimental conditions, the response was best measured at a potential of 0.20 V (vs. Ag/AgCl). The signals depended on the competitive mechanism between the immobilised ZEA and free ZEA for the aptamer binding site. The aptasensor works in the range 0.01 to 1000 ng·mL-1 ZEA concentration, with a detection limit of 0.017 ng·mL-1. High degree of cross-reactivity with the other analogues of ZEA was observed, whereas none towards other mycotoxins. The aptasensor was further applied for the determination of ZEA in the extract of maize grain and showed good recovery percentages between 87 and 110%. Graphical abstract Schematic representation of the electrochemical determination of zearalenone based on indirect competitive assay. Step a Immobilisation of ZEA on the surface of gold electrode via covalent attachment, b competition for the ZEA aptamer binding site between immobilised and free ZEA, and c current signal of the binding event based on SWV technique.
The objective of this study was to optimize the extraction of oil from pre-dried roselle seeds using response surface methodology (RSM). We also determined the oxidative stability of oil extracted from oven and freeze-dried roselle seed in terms of iodine value (IV), free fatty acid (FFA) value, peroxide value (PV), P-anisidine and total oxidation values (TOTOX value). The RSM was designated based on the central composite design with the usage of three optimum parameters ranged from 8 to 16 g of sample weight, 250-350 mL of solvent volume, and 6-8 h of extraction time. The highest oil yielded from roselle seed using the optimization process was 22.11% with the parameters at sample weight of 14.4 g, solvent volume of 329.70 mL, and extraction time of 7.6 h. Besides, the oil extracted from the oven dried roselle seed had the values of 89.04, 2.11, 4.13, 3.76 and 12.03 for IV, FFA, PV, P-anisidine, and TOTOX values, respectively. While for the oil extracted from freeze-dried roselle seed showed IV of 90.31, FFA of 1.64, PV of 2.47, P-anisidine value of 3.48, and TOTOX value of 8.42. PV and TOTOX values showed significant differences whereas; IV, FFA, and P-anisidine values showed no significant differences between the oven and freeze-dried roselle seed oils.