Tocotrienol microcapsules (TM) were formed by firstly preparing Pickering emulsion containing tocotrienols, which was then gelled into microcapsules using alginate and chitosan. In this study, we examined the stability of TM during storage and when applied into a model food system, i.e. yogurt. During storage at 40°C, TM displayed remarkably lower tocotrienols loss (50.8%) as compared to non-encapsulated tocotrienols in bulk oil (87.5%). When the tocotrienols were incorporated into yogurt, the TM and bulk oil forms showed a loss of 23.5% and 81.0%, respectively. Generally, the tocotrienols were stable in the TM form and showed highest stability when these TM were added into yogurt. δ-Tocotrienol was the most stable isomer in both forms during storage and when incorporated into yogurt. The addition of TM into yogurt caused minimal changes in the yogurt's color and texture but slightly altered the yogurt's viscosity.
This work investigated the underlying formation of acrylamide from amino acids in frying oils during high temperatures and at different times via modeling systems. Eighteen amino acids were used in order to determine which one was more effective on acrylamide production. Significantly the highest amount of acrylamide was produced from asparagine (5987.5µg/kg) and the lowest from phenylalanine (9.25µg/kg). A constant amount of asparagine and glutamine in palm olein and soy bean oils was heated up in modelling system at different temperatures (160, 180 and 200°C) and times (1.5, 3, 4.5, 6, 7.5min). The highest amount of acrylamide was found at 200°C for 7.5min (9317 and 8511µg/kg) and lowest at 160°C for 1.5min (156 and 254µg/kg) in both frying oils and both amino acids. Direct correlations have been found between time (R2=0.884), temperature (R2=0.951) and amount of acrylamide formation, both at p<0.05.
Palm olein (POL) was modified by enzymatic interesterification with different degrees of acyl migration in a solvent-free packed bed reactor. The fatty acid and acylglycerol composition, isomer content, thermodynamic behavior, and relationship between crystal polymorphism, solid fat content (SFC), crystal microstructure, and texture before and after modification were studied. We found that the increase in sn-2 saturation interesterification was not only due to the generated tripalmitin (PPP) but also caused by acyl migration, and the SFC profiles were changed accordingly. The emergence of high melting point acylglycerols was an important factor accelerating the crystallization rate, further shortening the crystallization induction time, leading to the formation of large crystal spherulites, thereby reducing the hardness. The transformation from the β' to the β form occurred during post-hardening during storage. The isomer content also affected the physicochemical properties of the modified POL.
Enzymatic glycerolysis produced ground nut oil-based diacylglycerols (GNO-DAG) with a purity of 43.28 ± 0.89% (GNO-DAG40). GNO-DAG80 (with a DAG purity of 87.33 ± 0.61%) was obtained after purification using molecular distillation. Traditional palm oil was mixed with the "liquid" DAG as margarine base oils. Subsequent evaluations of palm oil-DAG-based fats (PO-GNO DAG) as a margarine replacement in a W/O model system showed that the material was an ideal functional base oil with improved aeration properties and plasticity during application. The binary system physical, textural and crystallization property were determined, and the compatibility of the binary mixed system was analyzed by constructing a phase diagrams. The PO-GNO DAG showed decent compatibility between the two phases and had better texture and rheological properties. In addition, PO-GNO DAG40 showed better apparent viscosity and aeration characteristics than PO-GNO DAG80, with potential application in the food specialty fats industry.
This study investigates the impact of various chain lengths of hydrophilic polyglycerol fatty acid esters (HPGEs), namely SWA-10D, M-7D and M-10D on protein interactions and their influence on the surface morphology and interfacial properties of low-fat aerated emulsions under different pressures conditions. M-7D and M-10D samples exhibited larger particle sizes, higher ζ-potential and rougher surface compared to SWA-10D sample at 1 % concentration of HPGEs. Consequently, M-7D and M-10D samples demonstrated lower values of G', G'', and higher values tan δ at the oil-water interface as pressure increased, thereby promoting the formation of less viscoelastic structures. M-7D sample, characterized by lower content of α-helix structures, resulted in an observable redshift in the NH and CO groups of the protein. Molecular docking analysis affirmed that M-7D sample exhibited a lower absolute binding energy value, indicating stronger interaction with the protein compared to other samples, ultimately contributing to the unstable interfacial membrane formed.
The effect of different types of monoglycerides, including monopalmitin, capryl monoglyceride (GMB), and succinylated monoglyceride (GMSA) in combination with palm kernel stearin (PKS) and beeswax (BW), on the formation, crystal network structure, and partial coalescence properties of aerated emulsions (20 % w/w fat) was investigated. The stability of BW and PKS crystals with a 1 % concentration of GMSA and GMB, respectively, in the oil phase was lower than the other crystals. BW-GMSA and PKS-GMB crystals exhibited a lower crystallization rate, higher contact angles and no significant peak shift in the small-angle X-ray scattering results. The BW-GMSA and PKS-GMB emulsions had a lower nucleation rate in the bulk and a higher nucleation rate at the interface, resulting in a higher fraction of crystals adsorbed at the oil/water interface. This reduced the number of interfacial proteins and led to a high degree of partial coalescence and the formation of stable aerated networks.
This study aims to evaluate the effect of sucrose replacer mixtures (erythritol, mannitol, or tagatose in combination with inulin or polydextrose) on the crystal morphology, particle size distribution, rheology, melting properties, and fat polymorphism of dark compound chocolate. The result showed that the replacer mixture's hygroscopicity, particle size, and sugar crystal shape might significantly impact dark compound chocolate's rheological and textural properties but had no substantial impact on the melting properties and fat crystallization. Mannitol-containing samples exhibited the highest rheological value, likely related to their high moisture content, small particle size, and elongated crystal shape. Due to the similar specific surface area and comparable D90 value, the sample containing erythritol-polydextrose mixture resulted in a similar (P ≥ 0.05) Casson yield value (46.184 ± 2.45 Pa) compared to the sample containing sucrose (38.348 ± 1.68 Pa). It could be a potential sucrose replacer in the dark compound chocolate.
The digestion behavior of lipids plays a crucial role in their nutritional bioaccessibility, which subsequently impacts human health. This study aims to investigate potential variations in lipid digestion profiles among individuals of different ages, considering the distinct physiological functions of the gastrointestinal tract in infants, aging populations, and healthy young adults. The digestion fates of high oleic peanut oil (HOPO), sunflower oil (SO), and linseed oil (LINO) were investigated using in vitro digestion models representing infants, adults, and elders. Comparatively, lipid digestion proved to be more comprehensive in adults, leading to free fatty acid (FFA) levels of 64.53%, 62.32%, and 57.90% for HOPO, SO, and LINO, respectively. Besides, infants demonstrated propensity to selectively release FFAs with shorter chain lengths and higher saturation levels during the digestion. In addition, in the gastric phase, particle sizes among the elderly were consistently larger than those observed in infants and adults, despite adults generating approximately 15% FFAs within the stomach. In summary, this study enhances our fundamental comprehension of how lipids with varying degrees of unsaturation undergo digestion in diverse age groups.
Present study prepared curcumin liposomes with high encapsulation efficiency (>70%) using bovine milk and krill phospholipids; and investigated the effects of phospholipids composition on storage stability, in-vitro bioavailability, antioxidative and anti-hyperglycemic properties of the curcumin liposomes. Curcumin liposomes prepared from bovine milk phospholipids have smaller particle sizes (163.1 ± 6.42 nm) and greater negative zeta potentials (-26.7 mv) as compared to that prepared from krill phospholipids (particle size: 212.2 ± 4.1 nm, zeta potential: -15.23 mv). In addition, curcumin liposomes from bovine milk phospholipids demonstrated better stability under harsh storage conditions (alkaline conditions, oxygen, high temperature and relative humidity). Nevertheless, curcumin-loaded liposomes prepared from bovine milk phospholipids have inferior bioavailability compared to that prepared from krill phospholipids. No significant differences can be observed in terms of anti-oxidative and anti-hyperglycemic properties of liposomes prepared from both bovine milk and krill phospholipids. Findings from present study will open up new opportunities for development of stable curcumin liposomes with good functional properties (high digestibility, bioavailability and pharmacological effects).
Lupinus albus or white lupine has recently received increase attention for its medicinal values. Several studies have described the hypoglycemic effect of the white lupine, which is known as a food plant with potential value for treatment of diabetes. This study provides useful information for the identification and quantification of compounds in L. albus fractions by proton nuclear magnetic resonance (1H NMR) spectroscopy. In total, 35 metabolites were identified from L. albus fractions.Principal component analysis (PCA) was used as a multivariate projection method for visualizing the different composition of four different fractions. The bioactivities of fractions with different polarity obtained from the extract of L. albus seeds are reported. Among the fractions studied, the chloroform fraction (CF) exhibits a high free radical scavenging (DPPH) and α-glucosidase inhibitory activities with IC50 values of 24.08 and 20.08 μg/mL, respectively. A partial least-squares analyses (PLS) model had been successfully performed to correlate the potential active metabolites with the corresponding biological activities. Metabolites containing proline, caprate, asparagine, lupinoisolone C, hydroxyiso lupalbigenin and some unknown compounds show high correlation with the bioactivities studied. Moreover, the structural identification in the active fraction was supported by ultrahigh-performance-liquid chromatography-electrospray ionization tandem mass spectrometry (UHPLC-ESI-MS/MS) analysis. A total of 21 metabolites were tentatively identified from MS/MS data by comparison with previously reported data. Most of these compounds are isoflavonoids without known biological activity. This information may be useful for developing functional food from L. albus with potential application in the management of diabetes.
Basa catfish is a good source for fish oil extraction, which was believed to have good thermo-oxidative stability because of its similar fatty acid composition to that of palm olein (PO). The thermo-oxidative stability of PO, basa catfish oil (FO), and palm olein-basa fish oil blend (PO-FO; ratio 1:1) was evaluated after 75 frying cycles. No significant difference was observed in p-anisidine value, TOTOX value, conjugated trienes, monomeric oxidized triacylglycerols, and free fatty acids concentration after frying. Moreover, compared to PO, FO exhibited lighter color, lower acid value, conjugated dienes, polymerized triacylglycerol, and total polar content. The PO-FO blend also demonstrated a more favorable frying stability compared to the other two frying systems. These findings indicated that FO could be proposed as a promising alternative to common PO, and its blending with other vegetable oils at an appropriate ratio might improve the overall oil frying quality for future industrial applications.
Cardiovascular disease (CVD) is a serious disease that endangers human health and is one of the leading causes of death. Recent studies have reported that gut microbiota plays an important role in the development of CVD, especially its metabolite trimethylamine-N-oxide (TMAO). Dietary precursors, such as choline, L-carnitine, phosphatidylcholine and betaine were metabolized to trimethylamine (TMA) under the action of gut microbiota, and subsequently oxidized by hepatic flavin monooxygenases (FMOs) to form TMAO. Dietary fat is one of three major nutrients in food, has been found to have a positive or negative effect on the development of CVD. Multiple clinical and experimental evidences suggested that dietary fatty acids (FAs) can affect TMAO production through gut microbiota and/or FMO3 enzyme activity. This article summarizes the existing gut microbiota-mediated reduction of TMA, discusses the molecular mechanism of dietary FAs in the pathobiology of CVD from the view of TMAO. Therefore, this review provides new insight into the association of dietary FAs and CVD, paving the way for dietary FAs therapy for CVD.
The rheological properties, microstructure, textural properties, colour and droplet size distribution of mayonnaise-like emulsion models prepared using 10-30wt.% of palm olein-based diacylglycerol (POL-DAG) oil were compared with those of the control (100wt.% VCO) model. There were significant (P<0.05) differences in the particle size distribution of the oil droplets, the textural properties, and the rheological properties of the various emulsion models. The rheological analysis included the determination of the flow curves, yield stress, thixotropy, apparent viscosity, and viscoelastic parameters. The concentrated oil-in-water (O/W) emulsion with 30wt.% POL-DAG substitution exhibited high thixotropy. The POL-DAG content had a substantial effect on the rheological properties of yield stress, storage modulus (G') and loss modulus (G″). The pseudoplastic behaviour of the emulsions was demonstrated. The size of the particles in the 30% POL-DAG-substituted emulsion was dramatically increased after one day and 30days of storage. All of the emulsion samples with POL-DAG substituted for VCO showed a relatively non-uniform bimodal droplet size distribution after one day of storage. In general, substitution of 10-20wt.% POL-DAG oil is appropriate for preparing O/W emulsions that had flow curves and textural properties similar to those of the control sample.
The detection of 3- and 2-MCPD ester and glycidyl ester was transformed from selected ion monitoring (SIM) mode to multiple reaction monitoring (MRM) mode by gas chromatography triple quadrupole spectrometry. The derivatization process was adapted from AOCS method Cd 29a-13. The results showed that the coefficient of determination (R2) of all detected compounds obtained from both detection mode was comparable, which falls between 0.997 and 0.999. The limit of detection and quantification (LOD and LOQ) were improved in MRM mode as compared to SIM mode. In MRM mode, the LOD of 3- and 2-MCPD ester was achieved 0.01 mg/kg while the LOQ was 0.05 mg/kg. Besides, LOD and LOQ of glycidyl ester were 0.024 and 0.06 mg/kg respectively. A blank spiked with MCPD esters (0.03, 0.10 and 0.50 mg/kg) and GE (0.06, 0.24 and 1.20 mg/kg) were chosen for repeatability and recovery tests. MRM mode showed better repeatability in area ratio and recovery with relative standard deviation (RSD %)
The aim of this study was to develop formulations to produce lycopene nanodispersions and to investigate the effects of the homogenization pressure on the physicochemical properties of the lycopene nanodispersion. The samples were prepared by using emulsification-evaporation technique. The best formulation was achieved by dispersing an organic phase (0.3% w/v lycopene dissolved in dichloromethane) in an aqueous phase (0.3% w/v Tween 20 dissolved in deionized water) at a ratio of 1:9 by using homogenization process. The increased level of homogenization pressure to 500bar reduced the particle size and lycopene concentration significantly (p<0.05). Excessive homogenization pressure (700-900bar) resulted in large particle sizes with high dispersibility. The zeta potential and turbidity of the lycopene nanodispersion were significantly influenced by the homogenization pressure. The results from this study provided useful information for producing small-sized lycopene nanodispersions with a narrow PDI and good stability for application in beverage products.
Fish oil-in-water emulsions containing fish oil, thiol-modified β-lactoglobulin (β-LG) fibrils, chitosan and maltodextrin were fabricated using a high-energy method. The results showed that chitosan coating induced charge reversal; denoting successful biopolymers complexation. A significantly (p<0.05) larger droplet size and lower polydispersity index value, attributed to the thicker chitosan coating at the oil-water interface, were observed. At high chitosan concentrations, the cationic nature of chitosan strengthened the electrostatic repulsion between the droplets, thus conferring high oxidative stability and low turbidity loss rate to the emulsions. The apparent viscosity of emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex was higher than those stabilized using β-LG fibrils alone, resulting in the former's higher creaming stability. Under thermal treatments (63°C and 100°C), emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex possessed higher heat stability as indicated by the consistent droplet sizes observed. Chitosan provided a thicker protective layer that protected the oil droplets against high temperature. Bridging flocculation occurred at low chitosan concentration (0.1%, w/w), as revealed through microscopic observations which indicated the presence of large flocs. All in all, this work provided us with a better understanding of the application of protein fibrils-polysaccharide complex to produce stable emulsion.
Medium-and-Long Chain Triacylglycerol (MLCT) is a type of structured lipid that is made up of medium chain, MCFA (C8-C12) and long chain, LCFA (C16-C22) fatty acid. Studies claimed that consumption of MLCT has the potential in reducing visceral fat accumulation as compared to long chain triacylglycerol, LCT. This is mainly attributed to the rapid metabolism of MCFA as compared to LCFA. Our study was designed to compare the anti-obesity effects of a enzymatically interesterified MLCT (E-MLCT) with physical blend of palm kernel and palm oil (B-PKOPO) having similar fatty acid composition and a commercial MLCT (C-MLCT) made of rapeseed/soybean oil on Diet Induced Obesity (DIO) C57BL/6J mice for a period of four months in low fat, LF (7%) and high fat, HF (30%) diet. The main aim was to determine if the anti-obesity effect of MLCT was contributed solely by its triacylglycerol structure alone or its fatty acid composition or both. Out of the three types of MLCT, mice fed with Low Fat, LF (7%) E-MLCT had significantly (P<0.05) lower body weight gain (by ~30%), body fat accumulation (by ~37%) and hormone leptin level as compared to both the LF B-PKOPO and LF C-MLCT. Histological examination further revealed that dietary intake of E-MLCT inhibited hepatic lipid accumulation. Besides, analysis of serum profile also demonstrated that consumption of E-MLCT was better in regulating blood glucose compared to B-PKOPO and C-MLCT. Nevertheless, both B-PKO-PO and E-MLCT which contained higher level of myristic acid was found to be hypercholesterolemic compared to C-MLCT. In summary, our finding showed that triacylglycerol structure, fatty acid composition and fat dosage play a pivotal role in regulating visceral fat accumulation. Consumption of E-MLCT in low fat diet led to a significantly lesser body fat accumulation. It was postulated that the MLM/MLL/LMM/MML/LLM types of triacylglycerol and C8-C12 medium chain fatty acids were the main factors that contributed to the visceral fat suppressing effect of MLCT. Despite being able to reduce body fat, the so called healthful functional oil E-MLCT when taken in high amount do resulted in fat accumulation. In summary, E-MLCT when taken in moderation can be used to manage obesity issue. However, consumption of E-MLCT may lead to higher total cholesterol and LDL level.
Diacylglycerol (DAG) is commonly known as one of the precursors for 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) formation. Besides, 3-MCPDE and GE are heat-induced contaminants which can be formed in fat-containing baked products during the baking process. This study attempted to replace the conventional palm-based shortening (SH) with a healthier fat, namely soybean oil-based diacylglycerol stearin (SDAG) in producing biscuits. The effects of different baking temperatures (200, 210 and 220 °C) and SDAG:SH fat blend ratios (0:100, 60:40 (D64S), 80:20 (D82S), 100:0, w/w) towards the biscuits' physical properties were evaluated. Moreover, the oxidative stability, 3-MCPDPE and GE formation in the fats extracted from the biscuits were also investigated. SDAG-produced biscuit showed slight reductions in the spread ratio compared to the SH-produced biscuit. The elevated baking temperatures resulted in biscuits with increased hardness and low moisture content. Pure SDAG and the other fat blends exhibited significant (p
Searching for green and ecofriendly solvents to replace classical solvents for industrial scale extraction of coconut oil is of great interest. To explore these possibilities, this study performed comprehensive comparative analyses of lipid profiles and phytosterol compositions in coconut oils obtained by extraction with n-hexane, absolute ethyl alcohol, deep eutectic solvent/n-hexane, dimethyl carbonate (DME) and cyclopentyl methyl ether (CPME) using a foodomics approach. Results indicated that CPME (64.23 g/100 g dry matter) and DME (65.64 g/100 g dry matter) showed comparable capacity for total lipid extraction of total lipids to classical solvents (63.5-65.66 g/100 g dry matter). Considering the phytosterol yield, CPME (644.26 mg/kg) exhibited higher selectivity than other solvents (535.64-622.13 mg/kg). No significant difference was observed in the fatty acid composition of coconut oil by the different solvents assayed. Additionally, total 468 lipid molecules were identified in the samples. For glycerolipid and sphingolipid, the five solvents showed comparable extraction capabilities. However, CPME exhibited higher extraction efficiency of polar lipids (glycerophospholipid and saccharolipid) than other solvents. Overall, these results may be a useful guide for the application of green solvents in industrial production of coconut oil.
Sargassum brown seaweed is well-known to contain several bioactive compounds which exhibit various biological activities, including anti-inflammatory and antioxidant activity. Lipophilic extracts and fractions of Sargassum were reported to possess promising anti-inflammatory activity. This study, therefore, aims to evaluate the anti-inflammatory and antioxidant activity of Sargassum cristaefolium crude lipid extract and its fractions. The brown seaweed was obtained from Awur Bay, Jepara - Indonesia. Crude lipid fractionation was performed using normal phase column chromatography, and three different fractions (dichloromethane, acetone, methanol) were produced. The results showed that treatment of acetone fraction exerted strongest nitric oxide inhibition in lipopolysaccharide-induced RAW 264.7 cells, both in pre-incubated and co-incubated cell culture models. This outcome was in accordance with its 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and ferric reducing antioxidant power (FRAP). Metabolite profiling of lipid fractions was performed by ultra-high-performance liquid chromatography electrospray ionization orbitrap tandem mass spectrometry, while the orthogonal projection to latent structures analysis was conducted to determine some features with significant correlation to the bioactivity. There were 14 feature candidates considered from both positive and negative ionization mode datasets. Seven out of them were putatively identified as pheophytin a (1), all-trans fucoxanthin (2), 132-hydroxy-pheophytin a (3), pheophorbide a (4), 1-hexadecanoyl-2-(9Z-octadecenoyl)-3-O-β-D-galactosyl-sn-glycerol (6), 1-(5Z,8Z,11Z,14Z,17Z-eicosapentaenoyl)-2-(9Z,12Z,15Z-octadecatrienoyl)-3-O-β-D-galactosyl-sn-glycerol (10), and 1-(9Z,12Z,15Z-octadecatrienoyl)-2-(6Z,9Z,12Z,15Z-octadecatetraenoyl)-3-O-β-D-galactosyl-sn glycerol (12).