Mushroom cultivation has become an important component of agriculture, providing food and contributing to the global economy. It uses vertical space and addresses issues of food quality, health improvement, and environmental sustainability. Auricularia mushrooms are popular ingredients in traditional Chinese cuisine. The objective of this study was to determine yield and evaluate radical scavenging capacity of A. polytricha cultivated on rubberwood sawdust on a large scale; we measured total phenolic content; DPPH, hydroxyl, superoxide anion, and peroxyl radical scavenging; and reducing power. Cultivation on rubberwood sawdust produces an average of 4 harvests per bag and a biological efficiency of 80-82%. The antioxidant capacity investigations revealed that the ethyl acetate fraction was the most potent radical scavenger in all assays except that for superoxide anions, whereas the aqueous fraction exhibited mild to moderate antioxidant capacity in scavenging the various radicals. Artificial cultivation of A. polytricha on rubberwood sawdust yields many sporophores with potent antioxidant capacity.
This paper aim is to design an education kit for wastewater system that can maintain
the standard parameters of neutralized wastewater by maintaining the suitable pH
(Potential Hydronium) level and temperature of the wastewater from industry by using
fuzzy controller. This study is capable to control the unwanted bacteria by automatic
regulatory and monitoring the temperature, pH and water level. Fuzzy logic method is
use to control and monitor pH level as well as the temperature during clarifying process
because pH control process is a complex physical-chemistry process of strong
individuality of time-varying and non-linearity properties. Pumps used in the prototype
need to be controlled precisely to enable either acid or base to be pumped into mix
tank of the wastewater treatment. The control and monitoring system, which has been
designed through LabVIEW front panel will ease end user in inspection of the
parameters involve in wastewater treatment. The entire system output could be
observed remotely in Data Dashboard application in smartphone or tablet. The GUI
was designed and interfaced with the prototype constructed to carry out the process
of controlling and monitoring the required parameters. Few tests were conducted
repetitively to analyse the performance of the system parameters. It was found that
the controlled set point fixed within the range of pH 7.6-8.4, temperature 25-29.44
Celsius and water level of 20cm in this research that was effectively achieved in the
entire test conducted. In addition, the wastewater system accuracy and performance
is 96.72% and 90.22% respectively.
This paper assessed the relationship between team competency and design risk
management among Kuantan construction industries. Similarly, a survey was
conducted among 10 local and national construction industries in Kuantan with a
stratified random sampling. The returned questionnaires yielded 10 responses which
was used for data analysis. Five point Likert scale categories of risk management from
the previous studies was used and statistical analysis affirmed that there is positive
relationship between team competency and design risk management among Kuantan
construction industries.
This paper assessed the effect of time overruns on apartment building among
Kuantan Malaysian construction industries. A survey was conducted among 10
construction industries in Kuantan Pahang. Using proportionate stratified random
sampling, out of which 10 questionnaires were distributed for data analysis. Using
five point Likert scale categories from previous studies, statistical analysis affirmed a
significant positive relationship between time overruns and apartment building
among Kuantan Malaysian construction industries.
This paper examined the significant relationship between government regulation and
construction waste management among Malaysian construction industries. Survey
was conducted among 10 contractors registered G7, using proportionate stratified
random sampling, out of which 10 questionnaire were collected for data analysis with
five point Likert scale categories of waste management from previous studies,
statistical analysis affirmed a significant positive relationship between government
regulation and construction waste management in Malaysian construction industries
through Statistical Package for the Social Sciences.
This paper presents the housing improvement proposition in the Melaka resident area.Quality Function Deployment is used as a method to analyze customer behavior regarding customer requirement, satisfaction and comparison among the developers. By using this method, the main requirement by the buyer for their bungalow is their need of sufficient space to place their appliances in the house. At the end of the study, the details of buyer requirements are plotted into House of Quality, where it is believed to improve the quality of future bungalow house development in Melaka.
Evidence on rising global temperature, melting of ice caps, and withdrawal of glaciers
brings attentions to the enhancement of energy efficiency in energy intensive industries. Having a
realistic comparison between one plant and the best practice technology (BPT) in operation in the field
helps significantly to distinguish and diagnose the potentials where measures towards energy efficiency
improvement would be applicable. In this regard, for manufacturing industries, one of the most widely
used energy benchmarking tools is the Energy Benchmark Curve. An energy benchmark curve plots the
efficiency of plants as a function of the total production volume from all similar plants or as a function
of the total number of plants that operate at that level of efficiency or worse. This paper reviews the
methodology through which the benchmark curve is obtained for a specific industry followed by a
comparison of energy intensity for the iron and steel industry among China and the US. According to
the international energy benchmark curve for the iron and steel industry, the savings potentials per ton
of crude steel for the US. and China have been respectively 4.1 and 7.1 gigajoule comparing with the
BPT in the field. Finally, an overview over certain measures to enhance efficiency of such plants is
presented.
This paper provides a qualitative overview of different Optical Fiber Sensors (OFS),
which play important role in the field of sensors due to their excellent
characteristics, spontaneous response and easy handling system. The current
state of the art of optical fiber technology is reviewed, namely based on its main
characteristics and sensing advantages. In addition, the working principle of OFS
and their applications are discussed, particularly for sensor employment.
In this paper, the syntheses of kojic acid esters via chemical and enzymatic methods are
reviewed. The advantages and disadvantages of chemical process in term of process, safety and
efficiency are discussed. In enzymatic process, the significant process parameters related to the
synthesis of kojic acid esters such as the lipases, solvent, temperature and water content are
highlighted. Possible enzymatic synthesis using solvent and solvent-free system taking into
consideration of the difference in these systems involving cost, lipase reusability and efficiency
is comparatively reviewed. The possible approach for large scale production using various
enzyme reactor designs is also discussed and re-evaluated.
This paper is about the reduction of the overall size of metal blanking sheet that is being used to form a stamping product or car body panel of a car manufacturer in Malaysia. The current blanking sheet produces extra waste which will be recycled and does not contribute to increase productivity but increases inventory cost. The reduction in the blanking sheet size will lead to the reduction of raw material hence reduced the production cost. However, the reduced size of blanking sheet could affect the yield strength of the product. The study of the yield strength and yield improvement of the product are done by simulating stress analysis by using CATIA software. The results show that the new proposed size of the metal blanking sheet provides accuracy of the product dimension as well as maintaining the yield strength of the product and it reduced a significant amount of metal scrap which is nearly 4% of material weight and save around 10% of inventory cost.
The paper describes the uses of microfocus XRF to identify infected Basal Stem Rot (BSR) disease in Malaysian palm oil plants. Among symptoms of BSR are wilting of the leaves and plant malnutrition. The study involves determining the inorganic element content of normal and infected leaves. Si, Mo, Cl, K, Ca and Mn had been identified as the major elements. Their distribution was determined by constructing an elemental map of each of this element on the leaves. Line scan was also performed to look into changes on the element composition on a defined region. Quantitative analysis of Cl, Ca and K on the normal and infected leaves show that the infected leaves have lower Cl content and a higher Ca/K ratio than the normal leaves.
Batu Reput’ is primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of ‘Batu Reput’ in Malaysia that content large deposit of high-purity dolomite [CaMg (CO3)2]. Pure samples of ‘Batu Reput’ recently explored in the Koperasi Rimba Mas Padang Besar Quarry were investigated for their physical, chemical and mineralogical composition. SEM and XRD analysis methods were applied. The potential of ‘Batu Reput’ as a raw material in fertilizer production was investigated in this paper.
The amount of sugarcane bagasse and rice straw in the state of Perlis (Malaysia) is abundant while its utilization is still limited. One of the alternatives for the bagasse and straw utilization is as pulp raw material. This paper reviews on pulp from sugarcane bagasse and rice straw and its suitability for paper production. In this study, the pulp was extracted by the Soxhlet extraction method. The objective of this study was to investigate the cellulose, lignin and silica content of the pulp from sugarcane bagasse and rice straw. For rice straw, the presence of large amount of pentosanes in the pulp and black liquors, which also contain silica were decreased the using of straw in the paper industry. Therefore, formic acid pulping and NaOH treatment are studied to reduce or prevent silica. The isolated pulp samples were further characterized by Scanning Electron Microscope (SEM) to investigate their fiber dimensions.
The storage of oil sludge at refineries is a major problem to the petroleum industry. Oil sludge treatments such as by using sludge farming, incineration, physical and chemical techniques have been applied to separate the hydrocarbon from the solid sediment. The paper relates a characteristic study performed on solid sediment from a local oil sludge sample for making sintered brick. The study includes the used of XRD, XRF, digital microscopy and particle size analyzer. The result shows that the sample highly contains quartz minerals with particle size ranging from 0.5 – 200 ȝm. The chemical phosphorous from the surfactant can be removed by washing to make this solid sediment to be used as a material in the brick making.
The Lembah Bujang archeological complex near Sungai Petani, Kedah consists of various structures constructed at different times and spread over a wide area. This paper reports on the thermoluminescence (TL) dating of one of these structures. The structure was found to be 350 ± 90 yrs old. This is very young as compared with other structures that are from the 4th to the 16th centuries. This structure is suspected to be remnant of a Muslim Mosque whereas the other structures were Hindu and Buddist temples.
The paper looks into the possibility of using standard addition method to analyse uranium and thorium in tin slag. Tin slag samples obtained from Butterworth was grind to 180 ȝm and injected with different concentrations of uranium and thorium. Linear calibration graphs were obtained for both these samples with R 2 values for uranium and thorium as 0.9989 and 0.9915 respectively. Based on this graphs, the initial uranium and thorium in the tin slag sample was established as 60 ppm for uranium and 160 ppm for thorium.
One of the non-destructive methods used for the identification and verification of metals is by the energy-dispersive X-ray fluorescence (EDXRF) technique. EDXRF analysis provides several important advantages such as simultaneous determination of the elements present, enable to analyse a very wide concentration range, fast analysis with no tedious sample preparation. The paper shows how this technique is developed and applied in the identification and verification of different grades of stainless steels. Comparison of the results obtained from this analysis with certified reference standards show very small differences between them.
This paper studies the use of gamma irradiation for textile waste water treatment. Prior to irradiation, the raw wastewa ter was diluted using tap water to targeted concentration of COD 400 mg/l. The sample was irradiated at selected dose between the ranges of 2kGy to 100kGy. The results showed that Irradiation was effective in removing the highly colored refractory organic pollutants. The COD removal at lowest dose, 2kGy is about 310 mg/l. Meanwhile, at highest dose, 1 00kGy the COD reduced to 100mg/l. The degree of removal influenced by the dose introduced during the treatment pro cess. As the dose increased, higher removal of organic pollutant was recorded. On the other hand, other properties of t he wastewater such as pH, turbidity, suspended solid, BOD and color shows tremendous changes as the dose increases. This shows the concentration of pollutants and dose of irradiation applied are directly proportional to each other.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
Boundary element method (BEM) is a numerical technique that used for modeling infinite domain as is the case for galvanic corrosion analysis. The use of boundary element analysis system (BEASY) has allowed cathodic protection (CP) interference to be assessed in terms of the normal current density, which is directly proportional to the corrosion rate. This paper was present the analysis of the galvanic corrosion between Aluminium and Carbon Steel in natural sea water. The result of experimental was validated with computer simulation like BEASY program. Finally, it can conclude that the BEASY software is a very helpful tool for
future planning before installing any structure, where it gives the possible CP interference on any nearby unprotected metallic structure.