Many children are affected by early childhood caries (ECC) with some requiring dental treatment under general anesthesia (GA). In pediatric dentistry, GA is one of the established methods of behavior management. GA data is useful for understanding the caries burden among young children. This study aimed to determine the trends, patient characteristics, and types of treatments conducted under GA among young children in a Malaysian dental hospital over a 7-year period. A retrospective study using pediatric patient records from 2013 to 2019 was conducted on children aged 2-6 years (24-71 months) having ECC. Relevant data were collected and analyzed. In total, 381 children with a mean age of 49.8 months were identified. Some of the ECC cases were associated with abscesses (32.5%) and multiple retained roots (36.7%). Over a 7-year period, there was an upward trend of preschool children receiving GA. Of the 4713 carious teeth treated, 55.1% were extracted, 29.9% were restored, 14.3% had preventive procedures, and 0.4% were pulp treated. Mean extractions were significantly higher among preschoolers compared to toddlers (p = 0.001), while preventive treatment was markedly higher among toddlers. In terms of the type of restorative materials, almost similar distribution was observed between the two age groups with 86.5% treated using composite restorations. Dental treatment under GA was more frequently used among preschoolers than in toddlers, with extractions and restoration with composite resin being the common treatment options. The findings can help decision-makers or relevant parties address the burden of ECC and enhance oral health promotion activities.
In this study, oil palm mesocarp fiber (OPMF) was treated with superheated steam (SHS) in order to modify its characteristics for biocomposite applications. Treatment was conducted at temperatures 190-230 °C for 1, 2 and 3 h. SHS-treated OPMF was evaluated for its chemical composition, thermal stability, morphology and crystallinity. OPMF treated at 230 °C exhibited lower hemicellulose content (9%) compared to the untreated OPMF (33%). Improved thermal stability of OPMF was found after the SHS treatment. Moreover, SEM and ICP analyses of SHS-treated OPMF showed that silica bodies were removed from OPMF after the SHS treatment. XRD results exhibited that OPMF crystallinity increased after SHS treatment, indicating tougher fiber properties. Hemicellulose removal makes the fiber surface more hydrophobic, whereby silica removal increases the surface roughness of the fiber. Overall, the results obtained herewith suggested that SHS is an effective treatment method for surface modification and subsequently improving the characteristics of the natural fiber. Most importantly, the use of novel, eco-friendly SHS may contribute to the green and sustainable treatment for surface modification of natural fiber.
Over the past few decades, there has been an increasing demand for bio-based polymers and resins in industrial applications, due to their potential lower cost and environmental impact compared with petroleum-based counterparts. The present research concerns the synthesis of epoxidized palm oil acrylate (EPOLA) from an epoxidized palm oil product (EPOP) as environmentally friendly material. EPOP was acrylated by acrylic acid via a ring opening reaction. The kinetics of the acrylation reaction were monitored throughout the reaction course and the acid value of the reaction mixture reached 10 mg KOH/g after 16 h, indicating the consumption of the acrylic acid. The obtained epoxy acrylate was investigated intensively by means of FTIR and NMR spectroscopy, and the results revealed that the ring opening reaction was completed successfully with an acrylation yield about 82%. The UV free radical polymerization of EPOLA was carried out using two types of photoinitiators. The radiation curing behavior was determined by following the conversion of the acrylate groups. The cross-linking density and the hardness of the cured EPOLA films were measured to evaluate the effect of the photoinitiator on the solid film characteristics, besides, the thermal and mechanical properties were also evaluated.
The major hurdle in melt-processing of ultra-high molecular weight polyethylene (UHMWPE) nanocomposite lies on the high melt viscosity of the UHMWPE, which may contribute to poor dispersion and distribution of the nanofiller. In this study, UHMWPE/cellulose nanofiber (UHMWPE/CNF) bionanocomposites were prepared by two different blending methods: (i) melt blending at 150 °C in a triple screw kneading extruder, and (ii) non-melt blending by ethanol mixing at room temperature. Results showed that melt-processing of UHMWPE without CNF (MB-UHMWPE/0) exhibited an increment in yield strength and Young's modulus by 15% and 25%, respectively, compared to the Neat-UHMWPE. Tensile strength was however reduced by almost half. Ethanol mixed sample without CNF (EM-UHMWPE/0) on the other hand showed slight decrement in all mechanical properties tested. At 0.5% CNF inclusion, the mechanical properties of melt-blended bionanocomposites (MB-UHMWPE/0.5) were improved as compared to Neat-UHMWPE. It was also found that the yield strength, elongation at break, Young's modulus, toughness and crystallinity of MB-UHMWPE/0.5 were higher by 28%, 61%, 47%, 45% and 11%, respectively, as compared to the ethanol mixing sample (EM-UHMWPE/0.5). Despite the reduction in tensile strength of MB-UHMWPE/0.5, the value i.e., 28.4 ± 1.0 MPa surpassed the minimum requirement of standard specification for fabricated UHMWPE in surgical implant application. Overall, melt-blending processing is more suitable for the preparation of UHMWPE/CNF bionanocomposites as exhibited by their characteristics presented herein. A better mechanical interlocking between UHMWPE and CNF at high temperature mixing with kneading was evident through FE-SEM observation, explains the higher mechanical properties of MB-UHMWPE/0.5 as compared to EM-UHMWPE/0.5.
Understanding the nature of ruminant nutrition and digestion is essential to improve feeding management and animal production. Among many approaches, manipulating ruminant nutrition and fermentation through feed supplementation is being practised and researched. Over the last decade, the utilization of vegetable oils in feed formulation and their effects on various aspects of ruminants have been reported by many researchers. It is important to understand the lipid metabolism in ruminants by microorganisms because it affects the quality of ruminant-derived products such as meat and milk. Majority of vegetable oil supplementation could reduce rumen protozoa population in ruminants due to the effects of medium-chain fatty acids (FAs). However, vegetable oil also contains unsaturated FAs that are known to have a negative effect on cellulolytic bacteria which could show inhibitory effects of the fibre digestion. In this paper, the physiology of nutrient digestion of ruminants is described. This paper also provides a current review of studies done on improvement and modification of rumen fermentation and microbial population through vegetable oil supplementation.
Ammoniation of oil palm frond (OPF) with non-protein nitrogen (N) sources has been shown to improve the nutritional value and digestibility of OPF in ruminants. This study evaluated the effect of treating OPF without (control) or with different urea levels (1%-5%) on chemical composition and in vitro gas production, digestibility and fermentation properties using goat rumen fluids. The results showed that the treated OPF with urea (1%-5%) had significantly lower (p
Residual hemicellulose could enhance cellulose nanofiber (CNF) processing as it impedes the agglomeration of the nanocellulose fibrils and contributes to complete nanofibrillation within a shorter period of time. Its effect on CNF performance as a reinforcement material is unclear, and hence this study seeks to evaluate the performance of CNF in the presence of amorphous hemicellulose as a reinforcement material in a polypropylene (PP) nanocomposite. Two types of CNF were prepared: SHS-CNF, which contained about 11% hemicellulose, and KOH-CNF, with complete hemicellulose removal. Mechanical properties of the PP/SHS-CNF and PP/KOH-CNF showed an almost similar increment in tensile strength (31% and 32%) and flexural strength (28% and 29%) when 3 wt.% of CNF was incorporated in PP, indicating that hemicellulose in SHS-CNF did not affect the mechanical properties of the PP nanocomposite. The crystallinity of both PP/SHS-CNF and PP/KOH-CNF nanocomposites showed an almost similar value at 55-56%. A slight decrement in thermal stability was seen, whereby the decomposition temperature at 10% weight loss (Td10%) of PP/SHS-CNF was 6 °C lower at 381 °C compared to 387 °C for PP/KOH-CNF, which can be explained by the degradation of thermally unstable hemicellulose. The results from this study showed that the presence of some portion of hemicellulose in CNF did not affect the CNF properties, suggesting that complete hemicellulose removal may not be necessary for the preparation of CNF to be used as a reinforcement material in nanocomposites. This will lead to less harsh pretreatment for CNF preparation and, hence, a more sustainable nanocomposite can be produced.
A deferral takes place when donors fail to meet the eligibility criteria for donating blood during their visit to a blood collection site. Deferral periods, which can be either permanent or temporary, are implemented to protect the well-being of both the donor and the recipient. This study aimed to investigate the frequency of deferrals and the various factors contributing to them. A retrospective analysis was conducted at the Transfusion Medicine Unit of Hospital Universiti Sains Malaysia (USM), utilizing data obtained from blood donors during the period from January 2022 to June 2023. The research included a cohort of 18,751 donors who visited our transfusion unit for blood donation. Data, including gender, age, and reasons for deferral, were collected by reviewing the records of donors who were deferred. Descriptive statistics were employed to analyze the data of deferral blood donors. Out of 18,751 blood donors, 3,533 (18.84%) were deferred, consisting of 1,267 males (35.86%) and 2,266 females (64.14%). The age group of 18-25 years accounted for the highest number, comprising 1,875 donors (53.07%). Among the deferred cases, 53.33% were first-time donors, followed by 25.28% regular donors and 21.40% lapsed donors. The deferral of blood donors resulted from various reasons. The most common cause of overall deferral among blood donors was low hemoglobin (38.33%), followed by upper respiratory tract infections (8.38%), chronic medical illness (7.08%), and high blood pressure (7.02%). Temporary deferrals were more prevalent than permanent deferrals, accounting for 91.57% of cases compared to 8.43% for permanent deferrals. Voluntary non-remunerative blood donors constitute the backbone for a safe and reliable blood supply in transfusion services. Utilizing a comprehensive database will enable effective counseling of temporarily deferred donors, providing insights into the reasons for their deferral, the expected duration, and the appropriate treatments. This information is crucial for motivating these donors to recruit again in the donor pool. Public education initiatives aimed at raising awareness about the causes of deferral and promoting regular health check-ups can play a pivotal role in minimizing these deferrals.
Different biological methods are gaining recognition for the production of silver nanoparticles (Ag-NPs) due to their multiple applications. The use of plants in the green synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. In this study the green biosynthesis of silver nanoparticles using Callicarpa maingayi stem bark extract has been reported. Characterizations of nanoparticles were done using different methods, which include; ultraviolet-visible spectroscopy (UV-Vis), powder X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray fluorescence (EDXF) spectrometry, zeta potential measurements and Fourier transform infrared (FT-IR) spectroscopy. UV-visible spectrum of the aqueous medium containing silver nanoparticles showed absorption peak at around 456 nm. The TEM study showed that mean diameter and standard deviation for the formation of silver nanoparticles were 12.40 ± 3.27 nm. The XRD study showed that the particles are crystalline in nature, with a face centered cubic (fcc) structure. The most needed outcome of this work will be the development of value added products from Callicarpa maingayi for biomedical and nanotechnology based industries.
Despite efforts in improving medication safety, medication administration errors are still common, resulting in significant clinical and economic impact. Studies conducted using a valid and reliable tool to assess clinical impact are lacking, and to the best of our knowledge, studies evaluating the economic impact of medication administration errors among neonates are not yet available. Therefore, this study aimed to determine the potential clinical and economic impact of medication administration errors in neonatal intensive care units and identify the factors associated with these errors. A national level, multi centre, prospective direct observational study was conducted in the neonatal intensive care units of five Malaysian public hospitals. The nurses preparing and administering the medications were directly observed. After the data were collected, two clinical pharmacists conducted independent assessments to identify errors. An expert panel of healthcare professionals assessed each medication administration error for its potential clinical and economic outcome. A validated visual analogue scale was used to ascertain the potential clinical outcome. The mean severity index for each error was subsequently calculated. The potential economic impact of each error was determined by averaging each expert's input. Multinomial logistic regression and multiple linear regression were used to identify factors associated with the severity and cost of the errors, respectively. A total of 1,018 out of 1,288 (79.0%) errors were found to be potentially moderate in severity, while only 30 (2.3%) were found to be potentially severe. The potential economic impact was estimated at USD 27,452.10. Factors significantly associated with severe medication administration errors were the medications administered intravenously, the presence of high-alert medications, unavailability of a protocol, and younger neonates. Moreover, factors significantly associated with moderately severe errors were intravenous medication administration, younger neonates, and an increased number of medications administered. In the multiple linear regression analysis, the independent variables found to be significantly associated with cost were the intravenous route of administration and the use of high-alert medications. In conclusion, medication administration errors were judged to be mainly moderate in severity costing USD 14.04 (2.22-22.53) per error. This study revealed important insights and highlights the need to implement effective error reducing strategies to improve patient safety among neonates in the neonatal intensive care unit.