Displaying publications 81 - 89 of 89 in total

Abstract:
Sort:
  1. Hussin, A.S., Mokhtar, N., Naing, L., Taylor, J.A., Mahmood, Z.
    MyJurnal
    The purpose of this study was to determine the timing and sequence of emergence of the first 28 permanent teeth in a cross-section of Malay children in the district of Kota Bharu, in northeastern Peninsula Malaysia. The sample consists of 478 boys and 908 girls of Malay descent aged between 5-19 years. The criterion for tooth emergence was the appearance of the tooth through the gingivae. Descriptive statistics were calculated and probit regression analysis performed to determine the mean age of emergence of the permanent dentition. The mean age at emergence was found to conform to general trends, with emergence seen earlier in girls than in boys. Comparisons were made with the Chinese (Hong Kong) and the Punjabi (Chandigarh) profiles, which showed earlier emergence timings in those ethnic groups. The emergence timing in Malays, however, was earlier than in Thais (Central Thailand). The sequence of emergence was determined by referring to the mean age of tooth emergence of individual teeth and conforms to the general trend seen in other studies.
    Matched MeSH terms: Bicuspid
  2. Sultan T, Cheah CW, Ibrahim NB, Asif MK, Vaithilingam RD
    J Dent, 2020 Oct;101:103455.
    PMID: 32828845 DOI: 10.1016/j.jdent.2020.103455
    OBJECTIVES: This clinical study assessed and compared the linear and volumetric changes of extraction sockets grafted with a combination of Platelet-Rich Fibrin (PRF) and Calcium Sulfate (CS) (PRF-CS), and extraction sockets grafted with a combination of PRF and xenograft (X) (PRF-X).

    METHODS: Five single maxillary premolar extraction sockets received PRF-CS grafts and five single maxillary premolar sockets received PRF-X grafts. Linear (horizontal and vertical) measurements were accomplished using Cone Beam Computed Tomography (CBCT) images and volumetric changes were assessed using MIMICS software. Soft tissue level changes were measured using Stonecast models. All measurements were recorded at baseline (before extraction) and at 5-months post-extraction.

    RESULTS: Significant reduction in vertical and horizontal dimensions were observed in both groups except for distal bone height (DBH = 0.44 ± 0.45 mm, p = 0.09) and palatal bone height (PBH = 0.39 ± 0.34 mm, p = 0.06) in PRF-X group. PRF-CS group demonstrated mean horizontal shrinkage of 1.27 ± 0.82 mm (p = 0.02), when compared with PRF-X group (1.40 ± 0.85 mm, p = 0.02). Vertical resorption for mesial bone height (MBH = 0.56 ± 0.25 mm, p = 0.008), buccal bone height (BBH = 1.62 ± 0.91 mm, p = 0.01) and palatal bone height (PBH = 1.39 ± 0.87 mm, p = 0.02) in PRF-CS group was more than resorption in PRF-X group (MBH = 0.28 ± 0.14 mm, p = 0.01, BBH = 0.63 ± 0.39 mm, p = 0.02 and PBH = 0.39 ± 0.34 mm, p = 0.06). Volumetric bone resorption was significant within both groups (PRF-CS = 168.33 ± 63.68 mm3, p = 0.004; PRF-X = 102.88 ± 32.93 mm3, p = 0.002), though not significant (p = 0.08) when compared between groups. In PRF-X group, the distal soft tissue level (DSH = 1.00 ± 0.50 mm, p = 0.03) demonstrated almost 2 times more reduction when compared with PRF-CS group (DSH = 1.00 ± 1.00 mm, 0.08). The reduction of the buccal soft tissue level was pronounced in PRF-CS group (BSH = 2.00 ± 2.00 mm, p = 0.06) when compared with PRF-X group (BSH = 1.00 ± 1.50 mm, p = 0.05).

    CONCLUSIONS: PRF-CS grafted sites showed no significant difference with PRF-X grafted sites in linear and volumetric dimensional changes and might show clinical benefits for socket augmentation. The study is officially registered with ClinicalTrials.gov Registration (NCT03851289).

    Matched MeSH terms: Bicuspid
  3. Surendran S, Thomas E
    Am J Orthod Dentofacial Orthop, 2014 Jan;145(1):7-14.
    PMID: 24373650 DOI: 10.1016/j.ajodo.2013.09.007
    The objective of this study was to determine whether dental calcification can be used as a first-level diagnostic tool for assessment of skeletal maturity.
    Matched MeSH terms: Bicuspid/growth & development; Bicuspid/radiography
  4. Al-Khatib AR, Rajion ZA, Masudi SM, Hassan R, Anderson PJ, Townsend GC
    Orthod Craniofac Res, 2011 Nov;14(4):243-53.
    PMID: 22008304 DOI: 10.1111/j.1601-6343.2011.01529.x
    To investigate tooth size and dental arch dimensions in Malays using a stereophotogrammetric system.
    Matched MeSH terms: Bicuspid/anatomy & histology
  5. Bakri MM, Yahya F, Munawar KMM, Kitagawa J, Hossain MZ
    Arch Oral Biol, 2018 May;89:94-98.
    PMID: 29499561 DOI: 10.1016/j.archoralbio.2018.02.011
    OBJECTIVE: Transient receptor potential vanilloid 4 (TRPV4) has been considered as a mechano-, thermo- and osmo-receptor. Under inflammatory conditions in dental pulp, teeth can become sensitive upon exposure to a variety of innocuous stimuli. The objective of the present study was to investigate the expression of the TRPV4 channel on nerve fibers in human dental pulp of non-symptomatic and symptomatic teeth associated with inflammatory conditions.

    DESIGN: Dental pulp from extracted human permanent teeth was processed for fluorescence immunohistochemistry. Ten asymptomatic (normal) and 10 symptomatic (symptoms associated with pulpitis) teeth were used in this study. Nerve fibers were identified by immunostaining for a marker, protein gene product 9.5, and the cells were counterstained with 4',6-diamidino-2-phenylindole. An anti-TRPV4 antibody was used to trace TRPV4 expression.

    RESULTS: TRPV4 expression was co-localized with the nerve fiber marker. Immunoreactivity for TRPV4 was more intense (p 

    Matched MeSH terms: Bicuspid
  6. Ngeow, W.C.
    Ann Dent, 1996;3(1):-.
    MyJurnal
    Supernumerarypremolars have been reported to occur in 0.29% of the general populationand to represent about 9.1% of all supernumerary teeth. Most of the supernumerary teeth reported in the literature were detected by radiographsas most of them were unerupted or impacted.Asearch of the literature revealed not many cases of fully erupted and well aligned supernumerary premolars being reported. A case of a unilateral transposed supernumery premolarthat had erupted into alignment is presented here. The remarkable featureof this case is that the supernumery premolar is transposed between the first and second permanent maxillary molars. The etiology of supernumeraryteeth is also reviewed.
    Matched MeSH terms: Bicuspid
  7. Shanmuhasuntharam P, Thong YL
    Singapore Dent J, 1990 Dec;15(1):27-31.
    PMID: 2097726
    Transposition of teeth is a rare and special type of ectopic eruption where two contiguous teeth are found occupying each other's respective normal positions. Nine patients with transposed maxillary teeth are reported. The literature on transpositions, especially on the theories regarding the aetiology, is reviewed.
    Matched MeSH terms: Bicuspid/abnormalities
  8. Ahmed T, Rahman NA, Alam MK
    Prog Orthod, 2019 Jul 08;20(1):26.
    PMID: 31281954 DOI: 10.1186/s40510-019-0277-x
    BACKGROUND: To introduce an orthodontic bracket debonding device capable of measuring debonding force clinically by a novel sensor mechanism MATERIALS AND METHOD: A prototype orthodontic debonding device was constructed utilizing a lift-off debonding instrument (LODI) and force-sensitive resistor (FSR). For data interpretation, the force sensor was equipped with a microcontroller and C++ programming software running on a computer. Ninety-nine (99) 0.022-in. conventional metallic brackets were bonded to premolar teeth in vitro by a single clinician applying the same adhesive and bonding technique. For validation, the mean debonding force measured by the prototype debonding device (n = 30) and the universal testing machine (n = 30) was compared. Both intra- and inter-examiner reliability tests were done by holding and operating the device in a standardized manner. Following debonding by the prototype device, the bracket failure pattern was evaluated (n = 30) by adhesive remnant index (ARI) under the stereomicroscope at × 30 magnification. Statistical analysis included independent samples t test for validation and intraclass correlation coefficient (ICC) with a 95% confidence interval for both intra- and inter-examiner reliability.

    RESULTS: Mean orthodontic bracket debonding force measured by the prototype device (9.36 ± 1.65 N) and the universal testing machine (10.43 ± 2.71 N) was not significantly different (p 

    Matched MeSH terms: Bicuspid
  9. Mohd Zambri M.M., Wan Nurazreena W.H.
    Ann Dent, 2018;25(1):1-10.
    MyJurnal
    This report aimed to describe an effective biomechanics to control the upper incisors inclination during the
    correction of gummy smile with bimaxillary proclinations. A 14-year-old female presented with a Class II
    division I incisor relationship complicated with bimaxillary proclination on a Class 2 skeletal base. The lips
    were incompetent, showing 7 mm of upper incisors at rest and 5mm maxillary gingival display on smiling
    with normal upper lip length. Treatment involved extraction of all first permanent premolars followed by
    upper and lower fixed appliances. Intrusion of the upper incisors with controlled labial crown torque was
    accomplished with mini-implant anchorage placed bilaterally on the infrazygomatic crests with the retraction
    forces above the centre of resistance using 0.019x0.025-in stainless steel archwire in 0.022-in slot. The
    0.019x0.025-in stainless steel archwire in 0.022-in slot provided the vertical play to favour lingual crown
    tipping despite having forces above the centre of resistance for concurrent anterior segment intrusion.
    Matched MeSH terms: Bicuspid
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links