Displaying publications 81 - 95 of 95 in total

Abstract:
Sort:
  1. Hussain PB, Mohammad M
    Med J Malaysia, 2004 May;59 Suppl B:180-1.
    PMID: 15468877
    Failure analysis was performed to investigate the failure of the femur fixation plate which was previously fixed on the femur of a girl. Radiography, metallography, fractography and mechanical testing were conducted in this study. The results show that the failure was due to the formation of notches on the femur plate. These notches act as stress raisers from where the cracks start to propagate. Finally fracture occurred on the femur plate and subsequently, the plate failed.
    Matched MeSH terms: Bone Screws
  2. Ambrosio L, Battista S, Borzacchiello A, Borselli C, Causa F, De Santis R, et al.
    Med J Malaysia, 2004 May;59 Suppl B:71-2.
    PMID: 15468824
    Matched MeSH terms: Bone Screws
  3. Vert M
    Med J Malaysia, 2004 May;59 Suppl B:73-4.
    PMID: 15468825
    Matched MeSH terms: Bone Screws
  4. Shanmugam R, Ernst M, Stoffel K, Fischer MF, Wahl D, Richards RG, et al.
    Clin Biomech (Bristol, Avon), 2015 Jun;30(5):405-10.
    PMID: 25846324 DOI: 10.1016/j.clinbiomech.2015.03.019
    Dorsal plating is commonly used in proximal phalanx fractures but it bears the risk of interfering with the extensor apparatus. In this study, dorsal and lateral plating fixation methods are compared to assess biomechanical differences using conventional 1.5mm non-locking plates and novel 1.3mm lateral locking plates.
    Matched MeSH terms: Bone Screws
  5. Teh PH, Krishnamoorty S
    Med J Malaysia, 1986 Sep;41(3):205-12.
    PMID: 3670136
    A retrospective study of 34 patients with supracondylar-condylar fractures of the femur admitted to the Alexandra Hospital, Singapore, from January 1979 to December 1983 was carried out. These fractures were surgically treated by AO principles and fixation, and the surgery performed mainly by the two authors. Using strict criteria adopted from Schatzker of Toronto, 1 it was found that 62% of patients had excellent/ good results. The importance of treating supracondylar-condylar fractures by AO principles and fixation is emphasised.
    Matched MeSH terms: Bone Screws
  6. Tan SY, Leong WH, Ong LH, Mohd-Amin MZ
    Malays Orthop J, 2020 Jul;14(2):138-140.
    PMID: 32983390 DOI: 10.5704/MOJ.2007.023
    Lateral femoral wall perforation is a rare intra-operative complication in anterior cruciate ligament (ACL) reconstruction surgery. However, it can be challenging to manage if it occurs. We share our experience on lateral femoral wall perforation managed by a large fragment washer. A 25-year-old man with right ACL injury presented with knee instability despite physiotherapy. Anterior drawer test (ADT) and Lachman test were grade 3, glide on pivot shift was positive. During ACL reconstruction, the lateral femoral wall was perforated. Due to unavailability of the rescue endobutton and budget constraint, we passed the endobutton through a washer and allowed it to sit on the washer over the lateral femoral wall. ADT and Lachman test on post-operative 6, 12 and 24 weeks were grade 1, with a negative pivot shift test. Lysholm knee score improved from 69 pre-operatively to 98 post-operatively. Conventionally, lateral femoral wall perforation can be managed by rescue endobutton, or screw and washer post technique. As this complication is rare, the rescue endobutton may not be available at all times, and the cost of the implant is also another important factor to consider. A washer can be used as an alternative technique to manage lateral femoral wall perforation in ACL reconstruction as it is not only cost-effective but also provides stable fixation with good functional outcome.
    Matched MeSH terms: Bone Screws
  7. Wei R, Lim CY, Yang Y, Tang XD, Yan TQ, Yang RL, et al.
    Orthop Surg, 2021 Apr;13(2):553-562.
    PMID: 33665985 DOI: 10.1111/os.12918
    OBJECTIVES: This study aims to: (i) evaluate the outcome of patients with Harrington class III lesions who were treated according to Harrington classification; (ii) propose a modified surgical classification for Harrington class III lesions; and (iii) assess the efficiency of the proposed modified classification.

    METHODS: This study composes two phases. During phase 1 (2006 to 2011), the clinical data of 16 patients with Harrington class III lesions who were treated by intralesional excision followed by reconstruction of antegrade/retrograde Steinmann pins/screws with cemented total hip arthroplasty (Harrington/modified Harrington procedure) were retrospectively reviewed and further analyzed synthetically to design a modified surgical classification system. In phase 2 (2013 to 2019), 62 patients with Harrington class III lesions were classified and surgically treated according to our modified classification. Functional outcome was assessed using the Musculoskeletal Tumor Society (MSTS) 93 scoring system. The outcome of local control was described using 2-year recurrence-free survival (RFS). Owing to the limited sample size, we considered P bone destruction, we categorized the lesions into two subgroups: with the bone destruction distal to or around the inferior border of the sacroiliac joint (IIIa) and the bone destruction extended proximal to inferior border of the sacroiliac joint (IIIb). Six patients with IIIb lesions had significant prolonged surgical time (313.3 vs 249.0 min, P = 0.022), massive intraoperative hemorrhage (3533.3 vs 1760.0 mL, P = 0.093), poor functional outcome (46.7% vs 62.3%, P = 0.093), and unfavorable local control (31.3% vs 80.0%, P = 0.037) compared to the 10 patients with IIIa lesions. We then modified the surgical strategy for two subgroup of class III lesions: Harrington/modified Harrington procedure for IIIa lesions and en bloc resection followed by modular hemipelvic endoprosthesis replacement for IIIb lesions. Using the proposed modified surgical classification, 62 patients in the phase 2 study demonstrated improved surgical time (245.3 min, P = 0.086), intraoperative hemorrhage (1466.0 mL, P = 0.092), postoperative MSTS 93 scores (65.3%, P = 0.067), and 2-year RFS rate (91.3%, P = 0.002) during a mean follow-up time of 19.9 (1 to 60) months compared to those in the phase 1 study.

    CONCLUSION: The Harrington surgical classification is insufficient for class III lesions. We proposed modification of the classification for Harrington class III lesions by adding two subgroups and corresponding surgical strategies according to the involvement of bone destruction. Our proposed modified classification showed significant improvement in functional outcome and local control, along with acceptable surgical complexity in surgical management for Harrington class III lesions.

    Matched MeSH terms: Bone Screws
  8. Raymond DK Yeak, Nasir M Nizlan
    MyJurnal
    A 29-year-old man, who was a medical intern presented with history of recurrent shoulder dislocation. Radiographs
    and computed tomography imaging revealed a bony bankart lesion with glenoid bone loss of 25% with moderate
    Hill- Sachs lesion. Latarjet surgery was performed. At post-operative 8 months, the patient experienced pain and
    clicking in the left shoulder while performing cardiopulmonary resuscitation. At post-operative 1 year, magnetic resonance arthrography showed a united coracoid graft and intact posterior labrum. Left shoulder diagnostic arthroscopy and removal of Latarjet screws through a limited anterior deltopectoral approach were performed. The symptoms
    pain, clicking and instability sense was caused by either the prominent distal screw or the remnant suture material
    from the anchor which resulted in impingement of the infraspinatus muscle. We recommend the use of image intensifier to check on the position and length of the screw at the end of the surgery to avoid this complication
    Matched MeSH terms: Bone Screws
  9. Syed J, Zamri AR, Jamaluddin S, Ruben JK, Gopindran M
    Malays Orthop J, 2017 Mar;11(1):82-84.
    PMID: 28435584 MyJurnal DOI: 10.5704/MOJ.1703.016
    Traumatic elbow dislocations in children are rare but most of them are complex dislocations, and in such dislocations, medial humerus epicondyle fractureis the most common associated injury. Fracture incarceration in the elbow joint occurs in 5-18% of medial humerus epicondyle fractures but ulnar neuropraxia is very rare. Open reduction internal fixation is indicated in medial humerus epicondyle fracture with fracture incarceration, ulnar neuropraxia, marked instability or open fracture. Operative treatment options include fragment excision and sutures, closed or open reduction and Kirschner wire fixation, open reduction and suture fixation, open reduction and smooth pin fixation, and open reduction and screw fixation. However, ulnar nerve transposition is debatable as good outcome had been reported with and without nerve transposition. We report a case of a 13-year old boy, who presented with right elbow dislocation and intra-articular entrapment of medial humerus epicondyle fracture fragment, complicated with sensory ulnar neuropraxia, following a fall onto his right outstretched hand in a motor vehicle accident. The elbow joint was reduced using close manipulative reduction but the fracture fragment remained entrapped post-reduction. The patient then underwent open reduction and screw fixation of the medial humerus epicondyle fracture without ulnar nerve transposition. He had good functional outcome six weeks after surgical intervention, with complete recovery of ulnar neuropraxia six months later. Currently, he is doing well at school and is active with his sporting activity.
    Matched MeSH terms: Bone Screws
  10. Hoang T, Kieu H, Nguyen V, Tran T, Ngee T, Duong H
    PMID: 39230213
    BACKGROUND: To evaluate the treatment outcomes of lateral interbody bone graft surgery and posterior percutaneous screws for lumbar spinal stenosis Methods: This is a cross-sectional descriptive study. There were 27 patients with 30 segments of surgery diagnosed with lumbar spinal stenosis that were surgically treated with the XLIF method. Clinical outcomes measured included VAS scores for lower back pain and leg pain, ODI, and JOA scores. Magnetic resonance imaging of the lumbar spine after surgery was used to evaluate indirect decompression. X-ray or CT scan to evaluate bone fusion after 6 months of surgery. Differences were determined by independent T-test.

    RESULTS: There were 27 patients with 30 segments of surgery. They were 12 males and 15 females with an average age of 58.81±8.1. There was significant improvement in VAS for lower back pain from 7.11±1.31 to 3.67±1.3, VAS for leg pain from 6.81±2.19 to 1.59±1.89, ODI from 26.41±8.95 to 13.69±8.34, and JOA score from 7.63±2.87 to 13.5±1.73. A-P diameter increased 134%, lateral diameter increased 120%, lateral recess depth increased 166%, disc height increased 126%, foraminal height increased 124%, spinal canal area increased 30%. The p-values were all <0.001. The average hospital stay was 6.79±3.01 days. Complications included 1 pedicle screw malformation, 1 ALL avulsion fracture, 1 abdominal herniation, 1 venous damage, 1 failure.

    CONCLUSION: XLIF surgery presents a favorable option for patients with lumbar spinal stenosis. This is a minimally invasive surgical method that reduces pain, reduces bleeding, and is effective in indirectly decompressing the spinal canal both clinal and imaging.

    Matched MeSH terms: Bone Screws
  11. Yeak RD, Daud H, Nizlan NM
    Chin J Traumatol, 2019 Jun;22(3):182-185.
    PMID: 31060897 DOI: 10.1016/j.cjtee.2019.03.004
    Acromioclavicular joint (ACJ) injury is a common shoulder injury. There are various techniques of ACJ reconstruction. Superficial infection after ACJ reconstruction is not an uncommon complication. However, osteomyelitis post ACJ reconstruction has never been highlighted as a possible complication. Our patient is a 31-year-old male who sustained a Rockwood 5 ACJ dislocation and had anatomical ACJ reconstruction with autogenous gracilis and semitendinosus graft. Our technique involved the anatomical reconstruction of the ACJ and the coracoclavicular ligament with the usage of two bioscrews and the temporary stabilisation of the ACJ with two k-wires. As in any orthopaedic surgery, infection is often disastrous especially when the surgery involves implants. It can be disastrous with high morbidity to the patient as well as a costly complication to treat. Therefore, we wish to highlight this case as despite its rarity, osteomyelitis can be devastating to the patient and should be prevented if possible.
    Matched MeSH terms: Bone Screws/adverse effects
  12. Yeap EJ, Rao J, Pan CH, Soelar SA, Younger ASE
    Foot Ankle Surg, 2016 Sep;22(3):164-169.
    PMID: 27502224 DOI: 10.1016/j.fas.2015.06.008
    BACKGROUND: This study compares the outcomes of calcaneal fracture surgery after open reduction internal fixation and plating (ORIF) versus arthroscopic assisted percutaneous screw fixation (APSF).

    METHODS: Group I (N=12) underwent ORIF. Group II (N=15) underwent APSF. Anthropometric data, pre and post-operative stay, complications and duration off work were recorded in this retrospective case cohort study. Radiographs were analyzed for Bohler's, Gissane's angle and Sanders' classification. AOFAS Hindfoot and SF 36 scores were collected at final follow-up.

    RESULTS: Anthropometric data, Bohler's and Gissane's angles, AOFAS and SF 36 scores were not significantly different. Pre-operative duration was 12.3 days in ORIF and 6.9 days in APSF. Post-operative duration was 7.3 days vs 3.8 days. Duration off work was 6.2 months vs 2.9 months.

    CONCLUSION: The APSF group was able to have surgery earlier, go home faster, and return to work earlier. This study was not powered to demonstrate a difference in wound complication rates.

    Matched MeSH terms: Bone Screws*
  13. Chan CY, Kwan MK, Saw LB
    Eur Spine J, 2010 Jan;19(1):78-84.
    PMID: 19763636 DOI: 10.1007/s00586-009-1157-8
    The objective of this cadaveric study is to determine the safety and outcome of thoracic pedicle screw placement in Asians using the funnel technique. Pedicle screws have superior biomechanical as well as clinical data when compared to other methods of instrumentation. However, misplacement in the thoracic spine can result in major neurological implications. There is great variability of the thoracic pedicle morphometry between the Western and the Asian population. The feasibility of thoracic pedicle screw insertion in Asians has not been fully elucidated yet. A pre-insertion radiograph was performed and surgeons were blinded to the morphometry of the thoracic pedicles. 240 pedicle screws were inserted in ten Asian cadavers from T1 to T12 using the funnel technique. 5.0 mm screws were used from T1 to T6 while 6.0 mm screws were used from T7 to T12. Perforations were detected by direct visualization via a wide laminectomy. The narrowest pedicles are found between T3 and T6. T5 pedicle width is smallest measuring 4.1 +/- 1.3 mm. There were 24 (10.0%) Grade 1 perforations and only 1 (0.4%) Grade 2 perforation. Grade 2 or worse perforation is considered significant perforation which would threaten the neural structures. There were twice as many lateral and inferior perforations compared to medial perforations. 48.0% of the perforations occurred at T1, T2 and T3 pedicles. Pedicle fracture occurred in 10.4% of pedicles. Intra-operatively, the absence of funnel was found in 24.5% of pedicles. In conclusion, thoracic pedicle screws using 5.0 mm at T1-T6 and 6.0 mm at T7-T12 can be inserted safely in Asian cadavers using the funnel technique despite having smaller thoracic pedicle morphometry.
    Matched MeSH terms: Bone Screws/adverse effects; Bone Screws/standards*
  14. Nizlan MNM, Suhail A, Samsudin OC, Masbah O
    Med J Malaysia, 2004 Dec;59 Suppl F:65-8.
    PMID: 15941168
    A case of traumatic posterior cruciate ligament (PCL) avulsion fracture presenting with unusual radiographic findings is described. CT scan of the right knee showed features suggestive of combined ACL and PCL avulsion fractures. Arthroscopic findings showed that the injury was in fact a PCL avulsion fracture that was displaced anteriorly so as to mimic an ACL avulsion fracture on CT scan.
    Matched MeSH terms: Bone Screws
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links