MyMedR

Displaying publications 81 - 100 of 193 in total

Abstract:

Sort:

Fulltext The effect of job organizational factors on job satisfaction in two automotive industries in Malaysia

Dawal SZ, Taha Z

J Hum Ergol (Tokyo), 2007 Dec;36(2):63-8.
PMID: 18572797 DOI: 10.11183/jhe1972.36.2_63

A methodology is developed in diagnosing the effect of job organizational factors on job satisfaction in two automotive industries in Malaysia. One hundred and seventy male subjects of age 18-40 years with the mean age of 26.8 and standard deviation (SD) of 5.3 years and the mean work experience of 6.5 years and SD of 4.9 years took part in the study. Five job organizational factors were tested in the study including job rotation, work method, training, problem solving and goal setting. A job organization questionnaire was designed and was based on respondents' perception in relation to job satisfaction. The results showed that job organization factors were significantly related to job satisfaction. Job rotation, work method, training and goal setting showed strong correlation with job satisfaction while problem solving had intermediate correlation in the first automotive industry. On the other hand, most job organization factors showed intermediate correlation with job satisfaction in the second automotive industry except the training factor which had low correlation with job satisfaction. These results highlight that job rotation, work methods, problem solving and goal setting are outstanding factors in the study of job satisfaction for automotive industries.

Matched MeSH terms: Occupational Health
Fulltext Ergonomic task analysis in electronics industries: some case studies

Tan GL

J Hum Ergol (Tokyo), 1996 Jun;25(1):49-62.
PMID: 9551132 DOI: 10.11183/jhe1972.25.38

The analyses of a few tasks were carried out in an electronics factory. The main objectives are to identify the ergonomic and biomechanical hazards of problem work tasks, to analyze each task systematically in order to evaluate the workers' exposures to the risk factors of force, posture pressure and repetition and to make recommendations to reduce the risks and hazards. The methodology includes objective measures--detailed analysis by going through training manuals, job description and production records. Subjective measures include interviewing the operator and supervisors informally, the operators were also required to fill in a structured questionnaire. The paper concludes by making recommendations to reduce the ergonomic hazards by engineering solutions, redesign or administrative controls or the implementation of procedures.

Matched MeSH terms: Occupational Health*
Fulltext The Impact of Heat on Health and Productivity among Maize Farmers in a Tropical Climate Area

Sadiq LS, Hashim Z, Osman M

J Environ Public Health, 2019;2019:9896410.
PMID: 31061664 DOI: 10.1155/2019/9896410

Background: Heat stress disorders may cause negative health outcome and subsequent productivity reduction especially in those who work under direct sunlight for an extended number of hours.
Objective: This study assessed the impact of heat on the health and productivity among maize farmers in a hot tropical country.
Methods: A cross-sectional study was conducted among 396 maize farmers, randomly selected across Gombe province, Nigeria. The wet bulb globe temperature monitor (WBGT) Model QuesTemp036 was used in determining the heat index. Health was determined using a validated questionnaire, while productivity was determined by recording work output based on the number of ridges cultivated during the working hours.
Results: The farms recorded mean heat index with standard deviation (SD) of 31.56 (2.19) and 34.08 (1.54) in the hours of 9 am to 12 pm and 12-3 pm respectively, which exceeded the threshold level set by the ACGIH. Heavy sweating (93.2%), tiredness (48.5%), dizziness (34.1%), and headache (40.4%) were experienced by the respondents almost on daily basis. The finding further showed a significant difference in the farmers' productivity during the three time duration of the work day (p < 0.001). The productivity was significantly higher between the hours of 6-9 am (p < 0.001) and 12-3 pm (p < 0.001), compared to the hours of 9 am to 12 pm (p < 0.001). The factors that significantly predict the productivity outcome include temperature (p < 0.001), gender (p < 0.001), age (p=0.033), and BMI (p=0.008).
Conclusion: The farmers were frequently experiencing heat exhaustion which decreased their productivity.

Matched MeSH terms: Occupational Health
Fulltext Occupational Disease and Injury in Malaysia: A Thematic Review of Literature from 2016 to 2021

Awaluddin SM, Mahjom M, Lim KK, Shawaluddin NS, Tuan Lah TMA

J Environ Public Health, 2023;2023:1798434.
PMID: 36761248 DOI: 10.1155/2023/1798434

INTRODUCTION: Working people are exposed to occupational hazards and are at risk of having occupational disease or injury in a rapidly industrializing country like Malaysia. This study aims to review and summarize the occupational disease and injury in Malaysia from 2016 to 2021.
METHODS: This study used PubMed and Scopus databases to conduct a systematic literature search using a set of keywords. The selected records dated from 1 January 2016 to 8 September 2021 were extracted into the Mendeley Desktop and ATLAS.ti 8 software. Systematic screening was conducted by two independent researchers and finalized by the third researcher. Data were coded and grouped according to the themes. The results were presented as the table for descriptive analysis and cross-tabulation between the themes.
RESULTS: A total of 120 records were included in this study. Under the theme of main health problems, the findings showed that mental health, infectious disease, and work-related musculoskeletal disorders are the top three problems being discussed in the literature for the working people in Malaysia. The findings also showed an increasing trend of mental health problems during pandemic COVID-19 years. In addition, hospital was the highest workplace where the occupational health problems were reported.Discussion/Conclusion. There was substantial work on the mental health problem, infectious diseases, and work-related musculoskeletal disorders as the main health problem among workers in Malaysia in the past five years. The employers must report any occupational health and injury case to the authority and prompt intervention can be initiated.

Matched MeSH terms: Occupational Health*
Personal Protective Equipment for Endoscopy in Low-Resource Settings During the COVID-19 Pandemic: Guidance From the World Gastroenterology Organisation

Leddin D, Armstrong D, Raja Ali RA, Barkun A, Butt AS, Chen Y, et al.

J Clin Gastroenterol, 2020 9 11;54(10):833-840.
PMID: 32909973 DOI: 10.1097/MCG.0000000000001411

Performance of endoscopic procedures is associated with a risk of infection from COVID-19. This risk can be reduced by the use of personal protective equipment (PPE). However, shortage of PPE has emerged as an important issue in managing the pandemic in both traditionally high and low-resource areas. A group of clinicians and researchers from thirteen countries representing low, middle, and high-income areas has developed recommendations for optimal utilization of PPE before, during, and after gastrointestinal endoscopy with particular reference to low-resource situations. We determined that there is limited flexibility with regard to the utilization of PPE between ideal and low-resource settings. Some compromises are possible, especially with regard to PPE use, during endoscopic procedures. We have, therefore, also stressed the need to prevent transmission of COVID-19 by measures other than PPE and to conserve PPE by reduction of patient volume, limiting procedures to urgent or emergent, and reducing the number of staff and trainees involved in procedures. This guidance aims to optimize utilization of PPE and protection of health care providers.

Matched MeSH terms: Occupational Health/statistics & numerical data
Human energy expenditure in lowland rice cultivation in Malaysia

Nawi NM, Yahya A, Chen G, Bockari-Gevao SM, Maraseni TN

J Agric Saf Health, 2012 Jan;18(1):45-56.
PMID: 22458015

A study was undertaken to evaluate the human energy consumption of various field operations involved in lowland rice cultivation in Malaysia. Based on recorded average heart rates, fertilizing was found to be the most strenuous operation, with an average heart rate of 138 beats min(-1). There were no significant differences in the average heart rates of the subjects among the individual tasks within the first plowing, second plowing, and harvesting operations, with the average heart rates for these three tasks being 116, 106, and 106 beats min(-1), respectively. The corresponding energy expenditures were 3.90, 3.43, and 3.35 kcal min(-1). Loading the seed into the blower tank and broadcasting the seed were the most critical tasks for the seed broadcasting operation, with average heart rates of 124 and 136 beats min(-1), respectively. The highest energy expenditure of 418.38 kcal ha(-1) was observed for seed broadcasting, and the lowest energy expenditure of 127.96 kcal ha(-1) was for second plowing. The total seasonal human energy expenditure for rice cultivation was estimated to be 5810.71 kcal ha(-1), 55.7% of which was spent on pesticide spraying. Although the sample size in this study was relatively small, the results indicated that human energy expenditure per unit area (kcal ha(-1)) was positively linked to the average heart rate of the subjects and negatively linked to the field capacity. Thus, mechanization of certain tasks could decrease worker physical effort and fatigue and increase production.

Matched MeSH terms: Occupational Health
Fulltext An investigation of knowledge, attitude and practice of occupational safety and health (OSH) on safety climate at workplace in manufacturing industry

Nuruzzakiyah Mohd Ishanuddin, Ezrin Hani Sukadarin, Hanida Abdul Aziz, Junaidah Zakaria

Journal of Occupational Safety and Health, 2019;16(2):21-29.
MyJurnal

To investigate the safety climate and knowledge, attitude and practice (KAP) on occupational safety and health (OSH)in the manufacturing industry, also to determine the association between safety climate factors and KAP of safety among manufacturing worker. A cross-sectional study was conducted among 59 respondents from two manufacturing plants located in Gebeng, Kuantan, Pahang. Most of the respondents were Malay (91.5%) and male (96.6%). Participants were administered a set of questionnaires (Cronbach alpha=0.674) that measured the safety climate as perceived by the workers towards their supervisor and KAP of the workers regarding safety-related matters at the workplace. Self-administered questionnaires consisted of 5 points Likert scale used to measure each of the items of safety climate and KAP. The scales for safety climate and KAP were probed using 16 items and 17 items in the questionnaires, respectively. The results were analysed using a non-parametric test, which is Spearman’s rho correlations and descriptive statistics. Bivariate analysis was performed. There was a moderate positive correlation between safety climate and KAP domains (Spearman’s rho: 0.581, p

Matched MeSH terms: Occupational Health
Fulltext Empowering occupational health doctors through the occupational safety & health (noise exposure) regulations 2019

Manivasagam, Dayanath

Journal of Occupational Safety and Health, 2019;16(1):1-7.
MyJurnal

The Department of Occupational Safety and Health Malaysia (DOSH) is the authority responsible to safeguard the occupational safety, health and welfare of workers in Malaysia. Occupational noise-related hearing disorders are the leading type of occupational diseases recorded by DOSH every year. Occupational Health Doctor (OHD) is a competency recognized by DOSH and their scope of duties in industries is currently confined to conduct medical surveillance for workers with hazardous chemical exposure and confined space medical fitness examination. The duties of OHD are good to be expanded by empowering more of their roles in industrial activities involving other legislations under DOSH. The noise exposure regulation under the Factories and Machinery Act (FMA) 1967 has been governing the worker’s exposure to hazardous industrial noise and preventing noise-induced hearing loss (NIHL) since 1989. However, the provisions of the regulation need to be strengthened in some essential medical elements of the Hearing Conservation Programme (HCP) for a comprehensive prevention of NIHL at the workplace. Recently enacted Occupational Safety and Health (Noise Exposure) Regulations 2019 offer a wider coverage of workers in ten sectors of industries applicable under the Occupational Safety and Health Act (OSHA) 1994. The current regulatory requirements for management of workplace noise have many improvements compared to the existing law. Enhancement in the medical requirements of industrial audiometry is made prominent by involving OHDs to interpret audiograms and conduct medical examination for workers. The reporting of occupational noise-related hearing disorders to DOSH is outlined better in the new regulation. The occurrence of NIHL and other related hearing disorders are expected to reduce eventually after the introduction of Occupational Safety and Health (Noise Exposure) Regulations 2019. The OHDs will play a pivotal role in industrial audiometry and prevention of hearing disorders among the working population.

Matched MeSH terms: Occupational Health; Occupational Health Physicians
Fulltext The adoption of 5S practice and its impact on safety management performance: a case study in a university environment

Rhaffor, Kauthar A., Nurul Hafieza Azizul, Rahim Jamian, Jum’azulhisham Abdul Shukor

Journal of Occupational Safety and Health, 2019;16(1):9-17.
MyJurnal

he practice of 5S has been adopted by many organizations as a method to organize the workplace towards reducing waste and improving productivity. Moreover, the practice also promotes a safe and efficient environment in organisations. As safety performance of the workplace is among the key issues in most industries including universities to become world class organizations, this study seeks to address empirically the impact of 5S practice on safety management performance. In this context, a survey questionnaire is employed and distributed to 60 employees of the selected university to examine the employees’ perception on the adoption of 5S practice as well as the impact of 5S practice towards safety management performance. The questionnaires were validated by a pilot test with an acceptable value of Cronbach's alpha. Overall findings highlight there was positive perceptions toward 5S practice among the respondents. The results also revealed that 5S Audit has a very strong positive correlation with safety management performance. Furthermore, 5S Training and Top Management Commitment were (2) factors that strongly correlated to safety management performance. These factors are highly important in contributing toward the success of safety management performance. Additionally, since most of the employees were not exposed with Occupational Safety and Health (OSH), this study reveals moderate negative correlation between compliance to OSH Requirements and safety management performance.

Matched MeSH terms: Occupational Health
Fulltext The potential of blockchain technology for occupational safety and health management system

Rafizah Musa, Mohamad Syazli Fathib

Journal of Occupational Safety and Health, 2019;16(1):27-31.
MyJurnal

Industries in Malaysia are entering a period of major disruption caused by new technologies such as Artificial Intelligent, Robotics, Blockchain, Nanotechnology as well as Building Information Modelling (BIM) and the Internet of Things (IoT). In this fourth industrial revolution where information is generated and exchanged at a rapid and huge scale, its reliability is of paramount importance. The success of Occupational Safety & Health Management System (OSHMS) is highly dependent on the reliability of the information gathered and used, where a large number of intermediaries authenticate the information to establish trust between the stakeholders. Blockchain technology is able to do verification by virtue of secured distributed storage brings about a paradigm shift in the way we establish trust. This paper gives an overview of the potential use of Blockchain technology for Occupational Safety & Health Management System. The discussions focused on the benefits and challenges of implementing the Blockchain technology in OSHMS. The conclusion is drawn based on the strength in the characteristics provided by the Blockchain technology itself.

Matched MeSH terms: Occupational Health
Fulltext Occupational safety and health practice in school's classroom in Malaysia

Noor Adilah Hamzah, Ahmad Rasdan Ismail, Nor Kamilah Makhtar, Khairul Azhar Mat Daud, Norhidayah Mat Sout

Journal of Occupational Safety and Health, 2018;15(2):13-22.
MyJurnal

Today, more accidents reported in school, resulting not only minor injuries but also severe injuries such as fire in schools, mercury spills and falling from high places. The study was aimed at measuring the level of occupational safety and health practices in schools. The study was conducted at 205 schools in Kelantan, Malaysia. This study is a semi-quantitative study using observation method. Data collection is conducted based on Hazard Identification, Risk Assessment and Risk Control (HIRARC) Guidelines provided by the Department of Occupational Safety and Health, Malaysia. Hazard identification, risk assessment and risk control are determined using the HIRARC form. The findings were measured by determining the discrete data according to the number of low, medium and high-risk levels found. The study found that there were two dominant hazards namely physical hazard and ergonomic hazard. Therefore, the management should increase and improve classroom safety awareness to ensure safety and health of all occupants.

Matched MeSH terms: Occupational Health
Fulltext Job hazard analyses (JHA) for ergonomics risk factors in Malaysian pineapple plantation

Nur Fazrina Mohamad Salleh, Ezrin Hani Sukadarin

Journal of Occupational Safety and Health, 2018;15(1):17-25.
MyJurnal

The prevalence of Musculoskeletal Symptoms (MSS) rapidly increases and it is recognized as a significant health outcome in agricultural sector. Agricultural ergonomics risk factor is one of hazards constantly arising from all job task activities including awkward postures and heavy lifting. Job hazard analyses (JHA) were conducted to assess the exposure of ergonomics risk factors in Malaysia Pineapple Plantation. The analyses performed involved two steps. They were: 1) guidelines and manual book Malaysia Pineapple Plantation as references; and 2) conducting walkthrough observation based on checklist approaches at the plantation. The identified risk factors were prolonged exposure of standing, squatting, stooping and kneeling, highly repetitive motion on the lower limbs, deviation and twisting of wrist and lastly, heavy lifting. The analyses confirmed that the exposure to ergonomics risk factors in pineapple plantation is high. It would be desirable to reduce the risk factors by educating and training the pineapple workers to perform their task with strong consideration of occupational safety and health.

Matched MeSH terms: Occupational Health
Questionnaires results for data consolidation on occupational safety and health management system among gas contractor in peninsular Malaysia

Hamdan Bin Ramat, Shamsul Bahri Bin Mohd Tamrin, Mohd Rafee Bin Baharuddin, Mansor Bin Ahmad

Journal of Occupational Safety and Health, 2014;11(1):39-45.
MyJurnal

There is a need to develop an Occupational Safety and Health Management System (OSHMS) Critical Success Factors (CSF) Monitoring among gas contractor in Malaysia. Critical Success Factors (CSF) can be used for future implementation, adaptation and practice for gas contractor work for both by clients and contractors in Malaysia. The main purpose of CSF implementation is to reduce the number of accident related with Occupational Safety and Health (OSH). The need for CSF is due to the requirement by law and standard that require companies to establish an arrangement related to the identified OSH risks. The objective of this study is to assess the established of OSHMS among gas contractor in Peninsular Malaysia and to identify the CSF imposed by these industries. A cross sectional study for eighty gas contractor companies using established questionnaire has been done. All data consolidated in order to determine the OSHMS and it CSF among gas contractor in Peninsular Malaysia that has registered with Department of Occupational Safety and Health. Established questionnaire are based on OSHMS MS 1722:2011 elements requirement No 1: Policy, No 2: Organizing, No 3: Planning and Implementation, No 4: Evaluation and No 5: Action for Improvement as parameters to come out with organization means and Z-scores. Descriptive statistic showed that element mean (standard deviation) score for policy is 75(6.6), for Organizing is 63(5.2), for Planning and Implementation is 59(9.4), for Evaluation is 66(5.1) and Action for Improvement is 63(1.3). Percentage of company that complies with the main element for Policy is 15%, for Organizing is 8.8%, for Planning and Implementation is 11.3%, for evaluation is 11.3% and for Action for improvement is 13.8%. Percentage of companies that partially comply with Policy element is distributed between 61.0% to 85.0% which is 76.3 %, for Organizing score is mainly distributed between 46.0% to 60.0% which is 62.5%, for planning and Implementation score for 80 companies distributed mainly in group score between 46.0 to 60.0% which is 56.3 %, for Evaluation the partially comply score is distributed in group score between 61.0% to 85.5% which is 41 % and for Action for Improvement partially comply score, the distribution is mainly distribute in range of 61.0% to 85.0% which is 62.5 %. Z-score for element policy is five points from policy mean, for organizing Z-score is three points from Organizing mean, for Planning and Implementation the Z-score is three points from Planning and Implementation mean, for Evaluation the Z-score is three points from evaluation mean and for Action for improvement Z-score is two to three points from Action for Improvement mean. Percentage of compliance with OSHMS MS 1722:2011 elements by gas contractors in almost main element and sub element are still low and can be further improved by focusing on all company element score for continual improvement of OSH elements compliances.

Matched MeSH terms: Occupational Health
OHSAS 18001 and MS 1722 Certification initiatives prove the commitment to sustainability

Wai Onn Hong

Journal of Occupational Safety and Health, 2013;10(2):27-36.
MyJurnal

Malaysia’s palm oil industry is growing in complexity and successively to succeed on the global level by accounts for about 36% of the word production of palm oil [1]. But, Occupational Health and Safety (OHS) issues are still problematic areas that need to be addressed by all parties concerned in this industry. In the olden days, unlike construction or manufacturing industry, palm oil industry was green in OHS management system. However, due to stringent in the legislative enforcement in the past few years, it has lead some of the plantation companies to develop OHS management system, which are based on Occupational Health and Safety Assessment Series (OHSAS), towards corporate sustainability. Sustainability is not about paying lip-service to the latest corporate buzzword; neither is it about superficially meeting minimum requirements for the sake of compliance. Rather, sustainability is a core value that lies at the heart of the companies’ business conduct. In practical terms, this means strive to operate with due consideration for the interest of all stakeholders by making the health and safety of all workers a priority. This paper describes the certification of OHSAS 18001 and MS 1722 in Genting Plantations Berhad (GENP) prove the commitment to sustainability by forming guiding principle on safety management. Further, this paper also demonstrates that the implementation of safety management can help to reduce the accident rate, especially fatal accident.

Matched MeSH terms: Occupational Health
Local exhaust ventilation: past, present, and future

Nor Halim Hasan, Said, M.R., Leman, A.M.

Journal of Occupational Safety and Health, 2013;10(1):9-26.
MyJurnal

Engineering control is a method of controlling the risk of exposure to contaminants. Health effects to industrial workers are more severe whilst high exposure and time exposed to contaminants at workplace. Installation of industrial ventilation or local exhaust ventilation (LEV) system is the proposed method to reduce the risk. This paper discusses the past, present and future relating to LEV system in Malaysia. Current issues related to monitoring reported by Hygiene Technician in compliance with Occupational Safety and Health (Use of Standard Chemical Hazardous to Health Regulation 2000) carried out in several states in Malaysia as a sample. The nanotechnology is a new area at present and future. The involvement of government, employers and employees need to be justified due to the attention to prevent and control of any exposure. It is suggested that using the Computational Fluid Dynamic (CFD) simulation, a new design of LEV system can be upgraded and predicted.

Matched MeSH terms: Occupational Health
Fulltext Respiratory symptoms and spirometry findings among pottery makers in Perak

Ibrahim Zubil, AR., Wan Adnan W. A

Journal of Occupational Safety and Health, 2013;10(1):49-58.
MyJurnal

Occupational health hazards as a result to exposure to mineral dust containing silica has been established long time ago in occupational health history. Its effects on lung function and symptom was evaluated in a cross sectional studied among 49 small enterprise pottery workers in the county of Sayong clustered in 3 villages. Respiratory symptoms and lung function was evaluated using MRC respiratory questionnaire 86 and standard spirometry performed. The prevalence of chronic cough, phlegm and chest tightness was 24.5%, 16% and16% respectively. There was no significant decrement in lung function parameters from the predicted normal value with the mean predicted FVC; FEV1 and FEV1/FVC ratio was 85.32%, 83.87% and 99.22 respectively. The relationship between lung symptoms and lung function parameters was evaluated and the result was not significant.

Matched MeSH terms: Occupational Health
Fulltext Conformity to occupational safety and health regulations in small and medium enterprises

Baba Md Deros, Ahmad Rasdan Ismail, Mohd Yusri Mohd Yusof

Journal of Occupational Safety and Health, 2012;9(1):1-6.
MyJurnal

Regulation on occupational safety and health in Malaysia had evolved from the prescriptive Factory and Machinery Act (1967) to a self-regulated Occupational Safety and Health Act (1994). However, from the authors’ observation the high standards of occupational safety and health culture that surpass the legal requirement were not widely practiced by small and medium enterprises (SMEs). The two main objectives of this study are: first, to identify and determine the level of conformity; and second, to investigate the reasons of nonconformity to Occupational Safety and Health Act (1994) regulation in SMEs involved the chemical industry sub-sectors. The survey questionnaire was distributed to 150 SMEs in chemical industry sub-sectors. Forty one of the survey questionnaires were completed and returned, giving a response rate of 27.3% for the survey. The survey results revealed that an overwhelming majority (92.7%) of the respondents from SMEs are likely not conforming to the basic requirement of Occupational Safety and Health Act (1994). In addition to this, the survey also found that only 3.1% of the management personnel can be considered competent in terms of knowledge, skill and ability in carrying out occupational safety and health regulation within their respective organization. While, 96.9% of the respondents that participated in the survey can be considered not competent. The authors hope the result of this survey could assist the relevant authorities in formulating a better policy and strategy for implementing occupational safety and health in SMEs involved in chemical industry sub-sectors.

Matched MeSH terms: Occupational Health
A study of the effectiveness of local exhaust ventilation (LEV) using computational fluid dynamics (CFD) approach

Ng, C. S., Leman, A. M., N. Asmuin

Journal of Occupational Safety and Health, 2012;9(3):1-8.
MyJurnal

Local exhaust ventilation (LEV) is used in industries to capture contaminants such as gases, dusts, mists, vapours or fumes out of workstations to protect occupants’ exposure to contaminants. LEV is allocated and installed by employers, however it doesn’t work accordingly. LEV design is often overlooked and underappreciated. Effectiveness of LEV system can be achieved if more attention is focused to proper design of LEV system. To solve this issue, computational fluid dynamics (CFD) can be performed. CFD is a software tool to predict and simulate fluid dynamic phenomena. CFD is used to forecast or reconstruct the behaviour of an engineering product under assumed or measure boundary conditions. However, CFD is just a prediction tool, which can lead to inaccuracy of predicting airflow due to problems with pre-processing, solver and post-processing with parameter from actual experimental results. Therefore, validation is needed to help minimizing percentage error of CFD methods. In this research, measurements of airflow parameter of LEV system at National Institute of Occupational Safety and Health (NIOSH) Bangi, Selangor were conducted. Control Speed panel found at NIOSH Bangi, which is used to increase or decrease speed of fan, was performed using Control Speed of 20%, 40% 60% and 80%. Upon validation, average absolute error obtained from four different control speeds ranges from 3.372% to 4.862%. Validity of CFD modelling is acceptable, which is less than 5% and good agreement is achieved between actual experimental results and CFD simulation results. Therefore, it can be concluded that CFD software tool can be performed to simulate air velocity in LEV system. CFD methods can save labour costs and time consumption when it is used during earliest stage of LEV design, before actual construction is implemented. The outcome of this paper can be used as a baseline for factories equipped with LEV system to protect occupants’ exposure to contaminants.

Matched MeSH terms: Occupational Health
Compliances of airborne microbe in different phases of building commisioning

Ahmad Sayuti Zainal Abidin, Leman, A.M., Nor Mohd Razif Noraini

Journal of Occupational Safety and Health, 2012;9(3):39-44.
MyJurnal

This study intended to investigate the level on airborne microbe in indoor air for new constructed building. It was divided by three different phase of building commissioning in Bandar Baru Bangi, Selangor. The first phase of the sampling was carried out after the building fully handed over from the main contractor to the building owner. Second phase of the sampling take place after the building is equipped with furniture. Phase three sampling is conducted after one month of building occupancy. Airborne microbes’ concentrations were determined by using a single stage impactor (Biosampler) as per requirement of National Institute of Occupational Safety and Health (NIOSH) method, NIOSH Manual Analytical Method MAM 0800. The total concentration of airborne bacteria and fungi were average to 641 and 38 CFU/m³ in the first phase, 133 and 117 CFU/m³ in the second phase, and 389 and 52 CFU/m³ in the third phase. These findings indicate that although a new constructed building should be having a significant background level of airborne microbe (total bacteria and total fungi). The building owner should be aware to their indoor air status to protect the occupant from the safety and health problem (risk) especially for ventilated building.

Matched MeSH terms: Occupational Health
Data comparison on fumes local exhaust ventilation: Examination and testing compliance to USECHH regulation 2000

Nor Halim Hasan, Mohd Radzai Said, Abdul Mutalib Leman, B.Norerama D.Pagukuman, Jaafar Othman

Journal of Occupational Safety and Health, 2012;9(3):45-54.
MyJurnal

The paper focused on the examination and testing of local exhaust ventilation (LEV) systems at one of Electrical Company to check the transport velocity whether it meet the recommended American Governmental Industrial Hygienist (ACGIH) Standard. The industrial hygiene approaches, AREC (Anticipating, Recognize, Evaluate and Control) were adopted in this study. This is to ensure that the LEV system installed has the optimum efficiency to extract out the contaminants from the workstation. Objective of this study is to make comparison with previous and current monitoring data. The efficiency and the other parameter measured will be the main source to analyze for the particular applications. The differential of data was discussed and several recommendations are proposed to make sure the LEV system performance is excellent.

Matched MeSH terms: Occupational Health

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links