Displaying publications 101 - 120 of 141 in total

Abstract:
Sort:
  1. Islam R, Islam MRR, Tanaka T, Alam MK, Ahmed HMA, Sano H
    Jpn Dent Sci Rev, 2023 Dec;59:48-61.
    PMID: 36880059 DOI: 10.1016/j.jdsr.2023.02.002
    The aim of direct pulp capping (DPC) is to promote pulp healing and mineralized tissue barrier formation by placing a dental biomaterial directly over the exposed pulp. Successful application of this approach avoids the need for further and more extensive treatment. In order to ensure a complete pulp healing with the placement of restorative materials, a mineralized tissue barrier must form to protect the pulp from microbial invasion. The formation of mineralized tissue barrier can only be induced when there is a significant reduction in pulp inflammation and infection. Consequently, promoting the healing of pulp inflammation may provide a favorable therapeutic opportunity to maintain the sustainability of DPC treatment. Mineralized tissue formation was observed as the favorable reaction of exposed pulp tissue against a variety of dental biomaterials utilized for DPC. This observation reveals an intrinsic capacity of pulp tissue for healing. Therefore, this review focuses on the DPC and its healing procedure as well as the materials used for DPC treatment and their mechanisms of action to promote pulpal healing. In addition, the factors that can affect the healing process of DPC, clinical considerations and future perspective has been described.
  2. Fahim A, Mahmood R, Haider I, Luqman M, Ikhlaq I, Mahmood T, et al.
    PeerJ, 2022;10:e14152.
    PMID: 36213513 DOI: 10.7717/peerj.14152
    OBJECTIVE: The perceived oral health refers to the very own perception of a person's oral health (OH). This study aims to explore the association of perceived oral health status (PSR-OHS) with clinically determined OHS in three age groups: young adults, adults and older adults. This study also aims to identify demographic, socio-economic and/or clinical factors that influence PSR-OHS.

    METHODS: A cross-sectional study was conducted in ten different dental hospitals of Pakistan. The one-way ANOVA test was used to analyze patient's demographic distribution with PSR-OHS and oral functions. The complex sample general linear model was used to determine association between clinical OH and PSR-OHS. Analyses of each age group were conducted separately.

    RESULTS: A total of 1,804 outdoor patients participated in the study, out of which 660 were young adults, 685 adults and 459 were older adults. Overall self-perception of all age groups about their oral health was 'good' (mean = 3.71). Female gender and education status were a significant factor in young adults and adults. Family income affected PSR-OHS of only the adult age group. Frequent visit to dental clinic and preventive reason of dental attendance were associated with good PSR-OHS. DMFT score, prosthesis score and periodontal score also affected the PSR-OHS of individuals. Association between PSR-OHS and clinical examination was confirmed by complex general linear model.

    CONCLUSION: There are differences in the perceived oral health status of young adults, adults and older adults. The variables, age, education, family income, DMFT score, prosthesis score and periodontal score directly influence the self-perception of individuals.

  3. Shahid F, Nowrin SA, Alam MK, Khamis MF, Husein A, Rahman NA
    Healthcare (Basel), 2023 Mar 15;11(6).
    PMID: 36981521 DOI: 10.3390/healthcare11060864
    This study aimed to assess the outcomes of low-level laser therapy (LLLT) with the conventional bracket (CB) and self-ligating (SL) bracket systems on root resorption (RR) during orthodontic treatment. A total of 32 patients were included in this randomized clinical trial. All the patients were randomly divided into four individual groups (SLL: self-ligating laser, CBL: conventional bracket laser, SLNL: self-ligating non-laser, CBNL: conventional bracket non-laser). RR was measured from the cone-beam computed tomography (CBCT) radiographs which were taken at two stages of the orthodontic treatment: pre-treatment (T1) and after leveling and alignment stage (T2). Wilcoxon rank test for the comparison was conducted to compare the RR at T1 and T2 stages within each group and showed a significant difference (p < 0.05) for various variables. Mann Whitney test compared the RR in laser and non-laser groups irrespective of the bracket systems and exhibited no significant differences except the left lateral incisor. Moreover, CB and SL groups showed no significant difference in RR among any tooth. Kruskal Wallis test was performed to compare the RR among all groups which presented no significant differences. LLLT and bracket systems have no consequences on RR until the leveling and alignment stage of orthodontic treatment.
  4. Hameed HA, Hasan HA, Luddin N, Husein A, Ariffin A, Alam MK
    Biomed Res Int, 2022;2022:3675703.
    PMID: 35496039 DOI: 10.1155/2022/3675703
    AIM: To investigate and compare the cell cytotoxicity, proliferation, cell attachment, and morphology of human fetal osteoblasts (hFOB) cells of coated samples (titanium nanocopper (Ti Cu), titanium nanohydroxyapatite (Ti HA) and titanium nanocopper ion doped hydroxyapatite (Ti Cu/HA) and uncoated samples (Ti) in order to assess the suitability of these surface modifications on Ti-6Al-7Nb for dental implant application.

    MATERIALS AND METHODS: The cytotoxicity was studied by examining the hFOB cell response by MTT assessment. The cell morphology was evaluated by inverted microscopy and observed under scanning electronic microscopy (SEM).

    RESULTS: MTT assay results displayed that the Cu content on the surface of Ti-6Al-7Nb alloys did not produce any cytotoxic effect on cell viability. The cell viability rate in all samples ranges from 97% to 126%, indicating that hFOB cells grew at a high proliferation rate. However, no significant differences in cell viability were observed between Ti and Ti Cu and between Ti HA and Ti Cu/HA groups. Microscopic examination demonstrated no difference in the cell morphology of hFOB among all samples. In addition, SEM observation indicated favorable adhesion and spreading of the cells on the coated and uncoated samples.

    CONCLUSIONS: The surface modification of Ti-6Al-7Nb alloy with Cu, HA, and Cu/HA exhibits good cell biocompatibility, and the Cu has no influence on the cell proliferation and differentiation of hFOB.

  5. Alam MK, Awawdeh M, Aljhani AS, Alotaib GS, Abutayyem H, Alswairki HJ, et al.
    Children (Basel), 2023 May 15;10(5).
    PMID: 37238433 DOI: 10.3390/children10050885
    BACKGROUND AND OBJECTIVES: Investigation into the impact of dental trauma on the results of orthodontic treatment is crucial because it can have a major influence on patient care. However, there has not yet been a thorough review or meta-analysis of the available data, which is inconsistent and scant. Therefore, the goal of this systematic review and meta-analysis is to investigate the impact of dental trauma on orthodontic parameters. Search methods and criterion of selection: Major online databases were searched (beginning from the year 2011) for relevant articles using a properly defined search strategy. Analysis protocol: Risk of bias (RoB) and the Cochrane risk of bias tool were utilized for the purposes of bias evaluation within the individual studies and within the review, respectively.

    RESULTS: Out of the six clinical trials selected, a significant impact of trauma was observed in individuals in all but one paper. Gender predilection varied across studies and could not be conclusively determined. The follow-up period ranged from two months to two years in the trials. The odds ratio (OR) 0.38 [0.19, 0.77] and the risk ratio (RR) 0.52 [0.32, 0.85] indicated that both the odds as well as the relative risk of experiencing dental trauma were lower in the group with negligible impact compared to the group with noticeable impact. Conclusion and further implications: The findings show that dental trauma significantly affects orthodontic parameters, with lower risk and likelihood of suffering dental trauma in the group with negligible impact than in the group with noticeable impact. However, given the substantial heterogeneity among the studies, it is advised to exercise caution when extrapolating the findings to all populations. Registration and protocol: Registration in the PROSPERO database was carried out before initiating the investigation [CRD42023407218].

  6. Abutayyem H, Alam MK, Kanwal B, Alswairki HJ, Alogaibi YA
    J Orthod Sci, 2023;12:51.
    PMID: 37881658 DOI: 10.4103/jos.jos_53_23
    Infection control is essential to protect both the doctor and the patient by preventing the spread of infectious diseases. There is no exception in the field of dentistry, particularly in orthodontics, where numerous appliances are used for a variety of functions and also because the mouth cavity has the highest concentration of bacteria of any body part. Through this systematic review, we aimed to assess the various methods of sterilization employed in an orthodontic setting. Using relevant keywords, reference searches, and citation searches, the databases such as PubMed, MEDLINE, Web of Science, Cochrane, and Scopus were all searched; a total of 206 documents were found, of which 113 were initially selected. The remaining 23 distinct papers were initially made available after 90 publications that were identical to or similar to one another were eliminated. The final selection was made from eight documents that met all inclusion and exclusion requirements. The existing methods of sterilization were found to be competent in dealing with the microorganisms found in a typical orthodontic setting. The chemical method of sterilization was the norm in most of the studies that we assessed, with glutaraldehyde and peracetic acid (PAA) being the most commonly employed compounds for disinfection. PROSPERO Registration Number: CRD42022380831.
  7. Alam MK, Abutayyem H, Alswairki HJ, Hajeer MY, Alogaibi YA
    J Orthod Sci, 2023;12:41.
    PMID: 37881655 DOI: 10.4103/jos.jos_85_23
    The nutritional needs already increased by adolescent growth, activity, and stress are further exacerbated by the physical, physiological, and psychological stress that orthodontic treatment causes. Hence, the main objective of this systematic review was to analyze the relationship between adequate nutrition and its impact on orthodontic treatment success rates. Using relevant keywords, reference searches, and citation searches, the databases such as PubMed-Medical Literature Analysis and Retrieval System Online, Web of Science, Cochrane, and Scopus were all searched. "Diet," "Minerals," "Nutrition," "Orthodontics," and "Vitamins" were the search terms used to scour the database. The 10 studies selected for the systematic review and subsequent meta-analysis could not conclusively establish the correlation between proper nutrition and its impact on orthodontic treatment of the patient. There was virtually little connection between patients' dietary intake and the effectiveness of their orthodontic treatment. Additionally, a direct causal link between the two could not be established legitimately because the majority of the studies reviewed only noted an impact during the early stages of the treatment. PROSPERO Registration Number: CRD42022380828.
  8. Abutayyem H, Alam MK, Kanwal B, Alswairki HJ, Alogaibi YA
    J Orthod Sci, 2023;12:50.
    PMID: 37881657 DOI: 10.4103/jos.jos_52_23
    A variety of metals and alloys are employed in the field of orthodontics, primary of which happen to be the construction of wires. Through this systematic review, we aimed to assess the various metallurgical characteristics of the said metals and alloys. Four hundred and eighty-two documents in total were found after a thorough search of the online journals, and 169 of the papers were initially chosen. Ultimately, 16 documents were selected that satisfied the necessary inclusion and exclusion criteria, primarily in vitro studies, literature reviews, and comparative analyses. NiTi alloy was found to be the most commonly used alloy in construction of orthodontic wires across all the studies that we had selected for our review. It also had better performance and consistency in terms of its usage as depicted by the meta-analysis performed, with stainless steel wires being a close second primarily due to its lesser cost compared to the former. Metallurgy and orthodontics are inextricably linked with one another. The various components of orthodontics such as wires, pliers, and other instruments utilize the metallurgical characteristics of metals and alloys that are specially prepared for the challenges of this field. PROSPERO Registration Number: CRD42022378444.
  9. Riaz S, Khamis MFB, Ahmad WMABW, Abdullah JY, Alam MK
    PMID: 37202588 DOI: 10.1007/s12024-023-00651-0
    In this study, we aimed to compare the cusp and crown areas of the maxillary first premolar (PM1), second premolar (PM2), and first molar (M1) in males and females in the Malay population and to formulate sex prediction models. For this purpose, the maxillary posterior teeth of 176 dental cast samples (from 88 males and 88 females) were selected and transformed to two-dimensional digital models using 2D-Hirox KH-7700. Cusp and crown area measurements were obtained using Hirox software by tracing the outermost circumference of the tooth cusps. Statistical analysis included independent t-tests, logistic regression analysis, and receiver-operating characteristic (ROC) curves as well as determination of sensitivity and specificity; analysis was performed with SPSS version 26.0. The significance threshold was set at 0.05. All crown and cusp area measurements were significantly larger in males than in females (p 
  10. Islam MS, Kasim S, Amin AM, Alam MK, Khatun MF, Ahmed S, et al.
    PLoS One, 2023;18(8):e0285954.
    PMID: 37643156 DOI: 10.1371/journal.pone.0285954
    Foliar fertilization is a reliable technique for correcting a nutrient deficiency in plants caused by inadequate nutrient supply to the roots in acid soil. Soluble nutrients in banana pseudostem sap might be effective to supplement chemical fertilizers. However, the limited nutrients in sole banana pseudostem sap as foliar fertilization may not meet-up the nutritional demand of the crop. Field trials were, therefore, conducted with the combination of soil-applied fertilizers with foliar spray of banana pseudostem sap to increase nutrient uptake, yield, and quality of sweet corn planted in acidic soil. Three treatments viz., 100% recommended dose of fertilizers (RD) as control (T1), 75% of RD applied in soil with foliar application of non-enriched banana pseudostem sap (T2), and 50% RD applied in soil with foliar spray of enriched banana pseudostem sap (T3) were replicated four times. The combination of soil-applied fertilizer with foliar spray of enriched banana pseudostem sap (T3) showed a significant increase in leaf area index (11.3%), photosynthesis (12%), fresh cob yield (39%), and biomass of corn (29%) over control. Besides, the 50% RD of soil fertilization with foliar spray of enriched pseudostem sap increased nutrient uptake in addition to an increase in sugar content, phenolic content, soluble protein, and amino acids of corn. Considering the economic analysis, the highest net income, BCR (3.74) and MBCR (1.25) values confirmed the economic viability of T3 treatment over the T1. The results suggest that foliar spray of enriched banana pseudostem sap can be used as a supplementary source of nutrients to enhance nutrient uptake by corn while increasing yield and minimizing chemical fertilizer use in acid soil.
  11. Subhan R, Ismail WA, Musharraf S, Khan M, Hafeez R, Alam MK
    Biomed Res Int, 2021;2021:8757859.
    PMID: 34540998 DOI: 10.1155/2021/8757859
    The current scenario of the COVID-19 pandemic has forced dentists to seek different options for delivering healthcare services other than the in-person direct examination in clinical practice. Teledentistry is one of the options for remote patient care and monitoring. Objective. The present survey was conducted to assess the knowledge and perception of the dentists in Pakistan regarding teledentistry as an emergent supportive tool. Materials and Methods. A self-administered, close-ended, and prevalidated survey questionnaire was used, comprising 21 questions, and distributed electronically via e-mail, WhatsApp, and Facebook Messenger to evaluate the knowledge and perception of dentists regarding teledentistry. The data collected was compiled in a systematic manner and analyzed in terms of frequency (yes/no). Results. Out of a total of 350 dentists, 325 responded to the questionnaire, and it was seen that 62.5% of them did not have knowledge about teledentistry prior to COVID-19. 65.8% of dentists considered the practice of teledentistry in nonpandemic situations in the future. Conclusion. In the present study, it was observed that most of the dental professionals had inadequate knowledge about teledentistry before COVID-19, but the awareness and perception regarding teledentistry were currently satisfactory among the dental professionals in Pakistan. This emerging trend gives a positive hope for the implementation of teledentistry in the healthcare setup of Pakistan in the near future, as it will prove to be beneficial for safe dental practice during times of pandemic and even after.
  12. Alam MK, Alfawzan AA, Shrivastava D, Srivastava KC, Alswairki HJ, Mussallam S, et al.
    PMID: 35564443 DOI: 10.3390/ijerph19095048
    This meta-analysis aimed to compare Marfan syndrome (MFS) patients with non-MFS populations based on orofacial health status to combine publicly available scientific information while also improving the validity of primary study findings. A comprehensive search was performed in the following databases: PubMed, Google Scholar, Scopus, Medline, and Web of Science, for articles published between 1 January 2000 and 17 February 2022. PRISMA guidelines were followed to carry out this systematic review. We used the PECO system to classify people with MFS based on whether or not they had distinctive oral health characteristics compared to the non-MFS population. The following are some examples of how PECO is used: P denotes someone who has MFS; E stands for a medical or genetic assessment of MFS; C stands for people who do not have MFS; and O stands for the orofacial characteristics of MFS. Using the Newcastle-Ottawa Quality Assessment Scale, independent reviewers assessed the articles' methodological quality and extracted data. Four case-control studies were analyzed for meta-analysis. Due to the wide range of variability, we were only able to include data from at least three previous studies. There was a statistically significant difference in bleeding on probing and pocket depth between MFS and non-MFS subjects. MFS patients are more prone to periodontal tissue inflammation due to the activity of FBN1 and MMPs. Early orthodontic treatment is beneficial for the correction of a narrow upper jaw and a high palate, as well as a skeletal class II with retrognathism of the lower jaw and crowding of teeth.
  13. Mok PL, Koh AE, Farhana A, Alsrhani A, Alam MK, Suresh Kumar S
    Saudi J Biol Sci, 2021 Apr;28(4):2502-2509.
    PMID: 33551661 DOI: 10.1016/j.sjbs.2021.01.051
    COVID-19 is a rapidly emerging infectious disease caused by the SARS-CoV-2 virus currently spreading throughout the world. To date, there are no specific drugs formulated for it, and researchers around the globe are racing against the clock to investigate potential drug candidates. The repurposing of existing drugs in the market represents an effective and economical strategy commonly utilized in such investigations. In this study, we used a multiple-sequence alignment approach for preliminary screening of commercially-available drugs on SARS-CoV sequences from the Kingdom of Saudi Arabia (KSA) isolates. The viral genomic sequences from KSA isolates were obtained from GISAID, an open access repository housing a wide variety of epidemic and pandemic virus data. A phylogenetic analysis of the present 164 sequences from the KSA provinces was carried out using the MEGA X software, which displayed high similarity (around 98%). The sequence was then analyzed using the VIGOR4 genome annotator to construct its genomic structure. Screening of existing drugs was carried out by mining data based on viral gene expressions from the ZINC database. A total of 73 hits were generated. The viral target orthologs were mapped to the SARS-CoV-2 KSA isolate sequence by multiple sequence alignment using CLUSTAL OMEGA, and a list of 29 orthologs with purchasable drug information was generated. The results showed that the SARS CoV replicase polyprotein 1a had the highest sequence similarity at 79.91%. Through ZINC data mining, tanshinones were found to have high binding affinities to this target. These compounds could be ideal candidates for SARS-CoV-2. Other matches ranged between 27 and 52%. The results of this study would serve as a significant endeavor towards drug discovery that would increase our chances of finding an effective treatment or prevention against COVID19.
  14. Fadil F, Affandi NDN, Misnon MI, Bonnia NN, Harun AM, Alam MK
    Polymers (Basel), 2021 Jun 24;13(13).
    PMID: 34202857 DOI: 10.3390/polym13132087
    Electrospinning technology, which was previously known as a scientific interdisciplinary research approach, is now ready to move towards a practice-based interdisciplinary approach in a variety of fields, progressively. Electrospun nanofiber-applied products are made directly from a nonwoven fabric-based membranes prepared from polymeric liquids involving the application of sufficiently high voltages during electrospinning. Today, electrospun nanofiber-based materials are of remarkable interest across multiple fields of applications, such as in electronics, sensors, functional garments, sound proofing, filters, wound dressing and scaffolds. This article presents such a review for summarizing the current progress on the manufacturing scalability of electrospun nanofibers and the commercialization of electrospun nanofiber products by dedicated companies globally. Despite the clear potential and limitless possibilities for electrospun nanofiber applications, the uptake of electrospinning by the industry is still limited due to the challenges in the manufacturing and turning of electrospun nanofibers into physical products. The recent developments in the field of electrospinning, such as the prominent nonwoven technology, personal views and the potential path forward for the growth of commercially applied products based on electrospun nanofibers, are also highlighted.
  15. Barman A, Rashid F, Farook TH, Jamayet NB, Dudley J, Yhaya MFB, et al.
    Polymers (Basel), 2020 Jul 12;12(7).
    PMID: 32664615 DOI: 10.3390/polym12071536
    Although numerous studies have demonstrated the benefits of incorporating filler particles into maxillofacial silicone elastomer (MFPSE), a review of the types, concentrations and effectiveness of the particles themselves was lacking. The purpose of this systematic review and meta-analysis was to review the effect of different types of filler particles on the mechanical properties of MFPSE. The properties in question were (1) tensile strength, (2) tear strength, (3) hardness, and (4) elongation at break. The findings of this study can assist operators, technicians and clinicians in making relevant decisions regarding which type of fillers to incorporate based on their needs. The systematic review was performed according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A total of 26 original articles from 1970 to 2019 were selected from the databases, based on predefined eligibility criteria by two reviewers. The meta-analyses of nine papers were carried out by extracting data from the systematic review based on scoring criteria and processed using Cochrane Review Manager 5.3. Overall, there were significant differences favoring filler particles when incorporated into MFPSE. Nano fillers (69.23% of all studies) demonstrated superior comparative outcomes for tensile strength (P < 0.0001), tear strength (P < 0.00001), hardness (P < 0.00001) and elongation at break (P < 0.00001) when compared to micro fillers (30.76% of all studies). Micro fillers demonstrated inconsistent outcomes in mechanical properties, and meta-analysis of elongation at break argued against (P < 0.01) their use. Current findings suggest that 1.5% ZrSiO4, 3% SiO2, 1.5% Y2O3, 2-6% TiO2, 2-2.5% ZnO, 2-2.5% CeO2, 0.5% TiSiO4 and 1% Ag-Zn Zeolite can be used to reinforce MFPSE, and help the materials better withstand mechanical degradation.
  16. Nishi SE, Basri R, Rahman NA, Husein A, Alam MK
    J Orthod Sci, 2018;7:3.
    PMID: 29765915 DOI: 10.4103/jos.JOS_74_17
    OBJECTIVES: The aim of the study was to assess the association and correlation between the overjet and muscle activity (the masseter and temporalis muscles) in patient with Class II malocclusion in different genders using surface electromyography (sEMG).

    MATERIALS AND METHODS: The overjet (measured clinically) and electromyographical activity (rest, chew, post chew rest, clench and post clench rest) of the masseter and temporalis muscle of class II malocclusion patient were assessed in 18 patients (3 males and 15 females) from the School of Dental Science, Hospital University Sains Malaysia.

    RESULTS: The results were compared by simple linear regression test to evaluate the association between overjet and muscle activity in different genders. Class II malocclusion patients with increased overjet group showed significant association with masseter muscle activity on chewing stage (P = 0.005, F = 6.081 and adj-R2 = 0.473). Left temporalis muscle in class II malocclusion showed a significant linear association (P = 0.014, F = 0.812 and adj-R2= -0.034) with gender during clench.

    CONCLUSION: In conclusion, class II malocclusion patient with increased overjet can affect masticatory muscle function and as well as clench force may differ in gender.

  17. Chowdhury MA, Jahan I, Karim N, Alam MK, Abdur Rahman M, Moniruzzaman M, et al.
    Biomed Res Int, 2014;2014:145159.
    PMID: 24711991 DOI: 10.1155/2014/145159
    In the present study, the residual pesticide levels were determined in eggplants (Solanum melongena) (n = 16), purchased from four different markets in Dhaka, Bangladesh. The carbamate and organophosphorus pesticide residual levels were determined by high performance liquid chromatography (HPLC), and the efficiency of gamma radiation on pesticide removal in three different types of vegetables was also studied. Many (50%) of the samples contained pesticides, and three samples had residual levels above the maximum residue levels determined by the World Health Organisation. Three carbamates (carbaryl, carbofuran, and pirimicarb) and six organophosphates (phenthoate, diazinon, parathion, dimethoate, phosphamidon, and pirimiphos-methyl) were detected in eggplant samples; the highest carbofuran level detected was 1.86 mg/kg, while phenthoate was detected at 0.311 mg/kg. Gamma radiation decreased pesticide levels proportionately with increasing radiation doses. Diazinon, chlorpyrifos, and phosphamidon were reduced by 40-48%, 35-43%, and 30-45%, respectively, when a radiation strength of 0.5 kGy was utilized. However, when the radiation dose was increased to 1.0 kGy, the levels of the pesticides were reduced to 85-90%, 80-91%, and 90-95%, respectively. In summary, our study revealed that pesticide residues are present at high amounts in vegetable samples and that gamma radiation at 1.0 kGy can remove 80-95% of some pesticides.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links