MyMedR

Displaying publications 1721 - 1740 of 2920 in total

Abstract:

Sort:

Fulltext Effect of Cellulose Nanofibrils on the Properties of Jatropha Oil-Based Waterborne Polyurethane Nanocomposite Film

Amri MR, Guan CT, Osman Al-Edrus SS, Md Yasin F, Mohamad SF

Polymers (Basel), 2021 Apr 30;13(9).
PMID: 33946517 DOI: 10.3390/polym13091460

The objective of this work was to study the influence of cellulose nanofibrils (CNF) on the physical, mechanical, and thermal properties of Jatropha oil-based waterborne polyurethane (WBPU) nanocomposite films. The polyol to produce polyurethane was synthesized from crude Jatropha oil through epoxidation and ring-opening method. The chain extender, 1,6-hexanediol, was used to improve film elasticity by 0.1, 0.25, and 0.5 wt.% of CNF loading was incorporated to enhance film performance. Mechanical performance was studied using a universal test machine as specified in ASTM D638-03 Type V and was achieved by 0.18 MPa at 0.5 wt.% of CNF. Thermal gravimetric analysis (TGA) was performed to measure the temperature of degradation and the chemical crosslinking and film morphology were studied using Fourier-transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The results showed that when the CNF was incorporated, it was found to enhance the nanocomposite film, in particular its mechanical and thermal properties supported by morphology. Nanocomposite film with 0.5 wt.% of CNF showed the highest improvement in terms of tensile strength, Young's modulus, and thermal degradation. Although the contact angle decreases as the CNF content increases, the effect on the water absorption of the film was found to be relatively small (<3.5%). The difference between the neat WPBU and the highest CNF loading film was not more than 1%, even after 5 days of being immersed in water.

Matched MeSH terms: Temperature
A current overview of the oxidative desulfurization of fuels utilizing heat and solar light: from materials design to catalysis for clean energy

Lim XB, Ong WJ

Nanoscale Horiz, 2021 May 21.
PMID: 34018529 DOI: 10.1039/d1nh00127b

The ceaseless increase of pollution cases due to the tremendous consumption of fossil fuels has steered the world towards an environmental crisis and necessitated urgency to curtail noxious sulfur oxide emissions. Since the world is moving toward green chemistry, a fuel desulfurization process driven by clean technology is of paramount significance in the field of environmental remediation. Among the novel desulfurization techniques, the oxidative desulfurization (ODS) process has been intensively studied and is highlighted as the rising star to effectuate sulfur-free fuels due to its mild reaction conditions and remarkable desulfurization performances in the past decade. This critical review emphasizes the latest advances in thermal catalytic ODS and photocatalytic ODS related to the design and synthesis routes of myriad materials. This encompasses the engineering of metal oxides, ionic liquids, deep eutectic solvents, polyoxometalates, metal-organic frameworks, metal-free materials and their hybrids in the customization of advantageous properties in terms of morphology, topography, composition and electronic states. The essential connection between catalyst characteristics and performances in ODS will be critically discussed along with corresponding reaction mechanisms to provide thorough insight for shaping future research directions. The impacts of oxidant type, solvent type, temperature and other pivotal factors on the effectiveness of ODS are outlined. Finally, a summary of confronted challenges and future outlooks in the journey to ODS application is presented.

Matched MeSH terms: Temperature
Fulltext EFFECT OF DIFFERENT RATIOS OF LOW PROTEIN FLOUR TO OYSTER MUSHROOM (Pleurotus sajor-caju) POWDER ON THE PHYSICOCHEMICAL PROPERTIES AND SENSORY ACCEPTABILITY OF EDIBLE TABLESPOON

Au Jee Yuan, Faridah Yahya

UMT Journal of Undergraduate Research, 2020;2(1):37-46.
MyJurnal

The aim of this study was to determine the effect of different ratios of low protein flour to oyster mushroom (Pleurotus sajor-caju) powder on the physicochemical properties and sensory acceptability of edible tablespoon. Fresh grey oyster mushroom was dried in a convection oven at temperature of 55.0˚C ± 2.0˚C for 20 h prior to the grinding process. The low protein flour (LPF) was then incorporated with oyster mushroom powder (OMP) at different ratios of 100:0, 96:4, 92:8, 88:12 and 84:16, before being with vegetable oil, sugar, egg white and water in formulating the edible tablespoon. The proximate analyses were carried out in triplicate for calorie content, colour profile, hardness value and morphological structure of edible tablespoon. This study revealed that with decreasing LPF and increasing OMP in the formulation, the ash content (1.24% to 1.92%), crude fat content (8.98% to 10.40%) and fiber content (0.13% to 1.24%) were observed to have increased as well as the hardness value (2042.03g to 2844.57g) and pore’s size of the morphological structure of edible tablespoon. However, the carbohydrate content (78.64% to 75.56%) significantly decreased (p>0.05) together with L* value (from 68.47 to 61.71) when the decrease was in the the percentage of LPF and an increase the percentage of OMP. The calorie content, moisture content and protein content of edible tablespoon were not significantly (p>0.05) affected by different ratios of LPF to OMP. The edible tablespoon formulated with up to 8% of OMP was accepted by the sensory panelists but further increase in OMP addition significantly decreased the degree of likeness in terms of colour, odour, taste and overall acceptability of edible tablespoon. This study suggested that oyster mushroom edible tablespoon could be potential alternative disposable cutlery which will help to reduce the use of huge amount of non-biodegradable materials for environmental conservation.

Matched MeSH terms: Temperature
Fulltext POPULATION ABUNDANCE OF RED PALM WEEVIL, RHYNCHOPHORUS FERRUGINEUS (COLEOPTERA: DRYOPHTHORIDAE) IN RHU TAPAI COCONUT PLANTATION

Nurul Syafiqah Senafi, Nor Zalipah Mohamed

UMT Journal of Undergraduate Research, 2020;2(1):71-76.
MyJurnal

Red Palm Weevil (RPW), Rhynchophorus ferrugineus is a lethal pest which has been described as a serious pest that reduces the production of coconut tree and other major cultivated palms. RPW infestation was initially detected by Department of Agriculture (DOA) in 2007 in all eight Terengganu districts. Rhu Tapai plantation area is one of the highly infested areas in Terengganu. Until now, limited reports on population abundance of this lethal pest have been discussed particularly in Rhu Tapai. Therefore, a study on population abundance is a must in order to understand the population dynamic of RPW which will be the first step of its control strategy. A total of 12 traps were installed and synthetic pheromones (P028 Ferrolure+) were used in attracting the RPW adults. Overall, 81 individuals of RPW were successfully collected after 16 weeks of pheromone trapping (3rd September until 28th November 2018). The trend of weekly RPW captured was eventually decreasing from Week 1 to Week 16 but showed a sudden increment in Week 10. Pandan cultivar plot captured the highest number of adult RPW compared with Mawa cultivar plots. Result showed no significant difference between RPW sexes percentage of sexes which was 53% of male and 47% of female (1:1 ratio) (U= 0.143, p > 0.05). Daily rainfall and temperature significantly reduced the trapping efficiency (R²rainfall = 0.142, p = 0.145; R²temperature = 0.0858; p = 0.258). These results will be the baseline information for future study regarding control management strategy using pheromone-based mass trapping system.

Matched MeSH terms: Temperature
Fulltext SYNTHESIS OF ZINC OXIDE NANOPARTICLES BY USING ALOE VERA LEAF EXTRACT AS PONTENTIAL ANODE MATERIAL IN LITHIUM ION BATTERY

SITI RABIATUL ADAWIYAH MAZLI, HANIS MOHD YUSOFF, NURUL HAYATI IDRIS

UMT Journal of Undergraduate Research, 2020;2(2):0-0.
MyJurnal

Synthesis of nanoparticles by using plant have sparked interest among researchers due to environmentally safe, inexpensive and simple method to compare with chemical method. Use of plant in synthesis zinc oxide nanoparticles (ZnO NPs) that act as reducing and capping agent are more recommended, due to high production of product and rate of synthesis is faster than using microorganism. This study focus on the synthesis of ZnO NPs by using leaf extract of aloe vera (Aloe bardenisis miller) with different concentration (30%, 40% and 50%) and various calcination temperature which are 500 ˚C, 700 ˚C and 900 ˚C for 4 hours. Fourier – transform infrared spectroscopy (FTIR), Thermogravimetric Analysis (TGA), scanning electron microscopy (SEM), X-ray Diffraction (XRD) and Brunauer-Emmet and Teller (BET) were used to characterize the prepared samples. FTIR spectra showed present wavenumber in between 400-500 cm-1 indicated the presence of Zn-O stretch. Powder XRD pattern confirmed the hexagonal wurtzite structure with average particles size from 24.19 nm to 67.69 nm for all concentration and temperature by using Scherer’s equation. For SEM analysis the images show irregular shape for concentrations 30% and 50% with size range from 500 nm to 900 nm while for concentration 40% cubic shape was observe with size range from 140 nm to 900 nm. All characterize show that formation of ZnO NPs depend on the concentration and calcination temperature. Sample 30% and 50% ZnO NPs was applied in lithium battery at voltage from 0.01 to 3. 1.2 mAhg-1 was recorded for sample 30% ZnO NPs while 100 mAhg-1.

Matched MeSH terms: Temperature
MECHANICAL AND PHYSICAL PROPERTIES OF BIO-NANOCOMPOSITE FILMS BASED ON CHICKEN SKIN GELATIN WITH DIFFERENT CONCENTRATION OF CHITOSAN NANOPARTICLES

GUI CHAN LEE, NORIZAH MHD. SARBON

UMT Journal of Undergraduate Research, 2019;2(3):1-14.
MyJurnal

Plastics packaging is non-biodegradable and risks to human health and environmental pollution. In contrast, gelatin-based film lack of desired mechanical, thermal and water vapour barrier properties. Thus, this study aimed to investigate the mechanical and physical properties of bio-nanocomposite films based on chicken skin gelatin with different concentration of chitosan nanoparticles (CSNPs). Gelatin/CSNPs film solutions with different CSNPs concentration (0-8%, w/w) were stirred at 45oC for 30 min and oven-dried at 45oC. Film characterization determination includes tensile strength (TS), elongation at break (EAB), Young’s modulus (YM), water solubility, water vapour permeability (WVP), film morphology and melting temperature (Tm). Results of the study indicated that incorporation of CSNPs significantly influenced film properties. The addition of CSNPs increased the TS and YM value, which lead to stronger films than the pure chicken skin gelatin films. However the addition of CSNPs decreased the EAB value. Furthermore, WVP and water solubility significantly decreased (p < 0.05) by the addition of 6% CSNPs. Morphology images showed that increased CSNPs reduced the film’s amorphous character, especially in high level, in which higher CSNPs (8%) resulted in the aggregation of particles in the composites. The nano-reinforcement films showed higher thermal stability as compared to pure chicken skin gelatin films. In conclusion, the film with 6% CSNPs showed the best formulation, as it demonstrated high in TS, YM and Tm value, while low in EAB, water solubility and WVP value compared to other films. The results presented in this study showed the feasibility of using bio-nanocomposite technology to improve the properties of biopolymer films based on chicken skin gelatin.

Matched MeSH terms: Temperature
Fulltext EFFECT OF PHOTO-SELECTIVE NETTING ON GROWTH DEVELOPMENT OF GREEN AMARANTH (Amaranthus viridis L.)

SITI NABILAH MOHAMMAD SABRI, NURUL FAZIHA IBRAHIM, SITI NABILAH MOHAMMAD SABRI, SUHAIZAN LOB

UMT Journal of Undergraduate Research, 2020;2(3):67-72.
MyJurnal

Green amaranth (Amaranthus viridis L.) is one of the most popular leafy vegetables cultivated in Malaysia. Photo-selective netting is a revolutionary agricultural-technical idea, allowing traditional nets to be improved to a sophisticated level, which can impact microclimate and solar radiation as well as protect crops from pests. This study aims to investigate the growth performance of green amaranth under different three different treatments of photo-selective nets including black, and yellow shade nets and control. The assessed physiological, pre-harvest and post-harvest parameters were air temperature and relative humidity, measurement of absorption of photosynthetically active radiation (PAR), plant height, number of leaves, and dry weight. This study found that the yellow shade net showed the best performance in plant growth with the average difference in plant height (4.11 cm), average leaves number (7 leaves) and average dry weight (18.58 mg) were the highest compared to black shade net and control (without shading). In conclusion, photo-selective yellow shade net was able to enhance the growth development of green amaranth and could be applied in the large scale production to boost the growth and yield of leafy vegetables.

Matched MeSH terms: Temperature
Fulltext STUDY ON AQUEOUS KAFFIR LIME EXTRACT AS TREATMENT AGENT ON FRESH TOMATO FRUITS

NUR FAZLEEN SYUHADA ROSTAM, NOR AMIRA IZATI NOR AZMAN, NURUL FAZIHA IBRAHIM, SUHAIZAN LOB

UMT Journal of Undergraduate Research, 2020;2(4):17-22.
MyJurnal

Tomatoes have a short shelf life thus they pose a big challenge for growers to maintain the quality of tomatoes to increase customer acceptance. In this study, fungi associated with tomato disease symptoms were isolated and the potential of kaffir lime aqueous extract was evaluated in maintaining post-harvest quality of tomatoes. For this purpose, healthy tomatoes were dipped in 10% aqueous kaffir lime extract before evaluating the post-harvest parameters namely weight loss and firmness. A fungus namely Rhizophus stolonifer was isolated from the symptomatic tomatoes. Subsequently, it was confirmed to be pathogenic on healthy tomato fruits with 100% disease severity. Application of aqueous kaffir lime extract showed that tomato fruits dipped in 10% aqueous kaffir lime extract recorded higher weight loss and higher firmness as compared to untreated tomato fruits. The results showed that treatment with this concentration of plant extract did not help to reduce the weight loss, but it retained the firmness of the tomato fruits stored at room temperature at 27+2oC. Higher transpiration process would lead to shrinkage, weight loss, changes in texture and appearance of the fruits. Therefore, this study suggested an increased concentration of aqueous kaffir lime extract as a treatment agent in order to have a better effect in maintaining the quality of tomato fruits.

Matched MeSH terms: Temperature
Fulltext Projected Streamflow in the Kurau River Basin of Western Malaysia under Future Climate Scenarios

Adib MNM, Rowshon MK, Mojid MA, Habibu I

Sci Rep, 2020 05 20;10(1):8336.
PMID: 32433561 DOI: 10.1038/s41598-020-65114-w

Climate change-induced spatial and temporal variability of stremflow has significant implications for hydrological processes and water supplies at basin scale. This study investigated the impacts of climate change on streamflow of the Kurau River Basin in Malaysia using a Climate-Smart Decision Support System (CSDSS) to predict future climate sequences. For this, we used 25 reliazations consisting from 10 Global Climate Models (GCMs) and three IPCC Representative Concentration Pathways (RCP4.5, RCP6.0 and RCP8.5). The generated climate sequences were used as input to Soil and Water Assessment Tool (SWAT) to simulate projected changes in hydrological processes in the basin over the period 2021-2080. The model performed fairly well for the Kurau River Basin, with coefficient of determination (R2), Nash-Sutcliffe Efficiency (NSE) and Percent Bias (PBIAS) of 0.65, 0.65 and -3.0, respectively for calibration period (1981-1998) and 0.60, 0.59 and -4.6, respectively for validation period (1996-2005). Future projections over 2021-2080 period show an increase in rainfall during August to January (relatively wet season, called the main irrigation season) but a decrease in rainfall during February to July (relatively dry season, called the off season). Temperature projections show increase in both the maximum and minimum temperatures under the three RCP scenarios, with a maximum increase of 2.5 °C by 2021-2080 relative to baseline period of 1976-2005 under RCP8.5 scenario. The model predicted reduced streamflow under all RCP scenarios compared to the baseline period. Compared to 2021-2050 period, the projected streamflow will be higher during 2051-2080 period by 1.5 m3/s except in February for RCP8.5. The highest streamflow is predicted during August to December for both future periods under RCP8.5. The seasonal changes in streamflow range between -2.8% and -4.3% during the off season, and between 0% (nil) and -3.8% during the main season. The assessment of the impacts of climatic variabilities on the available water resources is necessary to identify adaptation strategies. It is supposed that such assessment on the Kurau River Basin under changing climate would improve operation policy for the Bukit Merah reservoir located at downstream of the basin. Thus, the predicted streamflow of the basin would be of importance to quantify potential impacts of climate change on the Bukit Merah reservoir and to determine the best possible operational strategies for irrigation release.

Matched MeSH terms: Temperature
Fulltext SOLAR PHOTOCATALYTIC EFFICIENCY OF ZINC OXIDE FOR WATER DECONTAMINATION

FARAH EILYANA MOHAMED

UMT Journal of Undergraduate Research, 2019;1(1):92-102.
MyJurnal

Solar photocatalysis is a green technology that takes advantage of sustainable solar energy for enhancing oxidation process of numerous harmful water contaminants. In this study, a custom solar driven zinc oxide (ZnO)-mediated photocatalytic system was developed and its efficiency to remove organic contaminants as well as to disinfect selected bacteria was investigated. Methylene blue (MB) dye was used as the model organic contaminant, while Escherichia coli(E.coli) was used as the model fecal coliform bacteria in contaminated water. A series of photodegradation experiments were conducted on water contaminated with either 10 mg/L of MB or ~1010CFU/ml of E.coli. The experiments were completed under sunlight irradiation in the presence of 1 g/L of nano ZnO photocatalyst for up to 6 hours. Using a solar thermal collector, the photoreactor operated in the temperature range of 25 to 50 oC. The findings revealed that the combination of solar thermal with solar photocatalysis usingZnO intensified the degradation of MB and disinfection of E.coli. 98.08% of MB dye and 99.99% of E.coliwere successfully removed from the water within the first 3 hours of treatment. Almost complete removal was eventually achieved after 6 hours of treatment. It is therefore suggested that ZnO-based solar photocatalytic system developed in this study is highly efficient at enhancing water decontamination process.

Matched MeSH terms: Temperature
Fulltext PRELIMINARY ASSESSMENT OF THE DISTRIBUTION OF PM2.5-BOUND POLYCYCLIC AROMATIC HYDROCARBONS IN PRIMARY SCHOOL ENVIRONMENTS IN KUALA LUMPUR

MOHAMAD FIRDAUS ISMAIL, MUHAMMAD FAIS FADZIL, NORHAYATI MOHD TAHIR, NORHAYATI MOHD TAHIR, MOHD TALIB LATIF, NOORLIN MOHAMAD

UMT Journal of Undergraduate Research, 2019;1(2):51-58.
MyJurnal

Fine particulate matter (aerodynamic diameter ≤2.5 μm) (PM2.5) has become a major concern because it can adsorb chemicals e.g. polycyclic aromatic hydrocarbons (PAHs) onto its surface. Although PAHs are priority pollutants that can cause adverse health effect, there is still limited information concerning indoor exposures to PAHs in Malaysia. This study aimed to characterise the distribution of PAHs bounded to PM2.5in primary school environments. Indoor and outdoor PM2.5 were collected between May and July 2017 using low volume samplers (LVS) at three public primary schools in the Federal Territory of Kuala Lumpur. PAHs were extracted by ultrasonic extraction with Dichloromethane: n-Hexane (1:1, v/v) as the extraction solvent and analysed using gas chromatography coupled with mass spectrometer (GC-MS). Based on the results, the average total concentration of PAHs (∑PAHs) ranged from 3.8 to 10.1 ng m-3and 1.6 to 8.0 ng m-3for outdoors and indoors, respectively. PAHs in PM2.5samples indicated the potential contribution of combustion at high temperature and indoor sources and the infiltration of outdoor PAHs were the important sources for outdoor and indoor, respectively. In addition, the diagnostic ratio analysis showed that vehicular emissions were the most predominant sources of PAHs in school environments.

Matched MeSH terms: Temperature
Characterization of crude 5'-phosphodiesterase from germinated adzuki (Vigna angularis L.) beans

Pui LP, Mohammed AS, Ghazali HM

Acta Sci Pol Technol Aliment, 2020 9 27;19(3):319-331.
PMID: 32978914 DOI: 10.17306/J.AFS.0804

BACKGROUND: 5'-Phosphodiesterase (5'-PDE) is an enzyme that hydrolyzes RNA to form 5'-inosine monophosphate (5'-IMP) and 5'-guanosine monophosphate (5'-GMP). These 5'-nucleotides can function as flavor enhancers. Adzuki beans (Vigna angularis L.) are found to be high in 5'-PDE.
METHODS: 5'-phosphodiesterase (5'-PDE) enzyme was characterized from adzuki beans, in which the optimum pH and temperature were determined. In addition, the stability of 5'-PDE was assessed at different pH and temperature. The effects of cations and EDTA were evaluated to characterize the 5'-PDE enzymes further.
RESULTS: The alkaline 5'-phosphodiesterase has an optimum pH of 8.5. This enzyme is also thermostable, with an optimum temperature of 80°C. The stability in terms of temperature and pH was also determined, and was found to be stable in the pH range of 7.0-8.5. This enzyme was found to retain more than 80% of its activity for 4 days at 60 and 65°C. In addition, the effects of 14 different metal ions, 4 types of detergents and ethylenediaminetetraacetic acid (EDTA) on 5'-PDE were studied. Ca2+, K+, Mg2+ and Li+ activated 5'-PDE while Na+, Zn2+, Ni+, Hg+, Cu2+, Pb2+, Fe2+, Al3+, Ba2+ and Co2+ were inhibitory. EDTA, Triton X-100 and sodium dodecyl sulfate (SDS) were strong inhibitors of 5'-PDE, while Tween 80 and Tween 20 were slightly inhibitory. The effects of cations and EDTA suggest that 5'-PDE from adzuki beans is a metalloenzyme.
CONCLUSIONS: Although 5'-PDE from adzuki beans has a high temperature optimum of 80°C, the enzyme is more stable at 60°C, and different cations affected the activity of the enzyme differently.

Matched MeSH terms: Temperature
Bioremediation and Detoxification of the Textile Wastewater with Membrane Bioreactor Using the White-rot Fungus and Reuse of Wastewater

Hossain K, Quaik S, Ismail N, Rafatullah M, Avasan M, Shaik R

Iran J Biotechnol, 2016 Sep;14(3):154-162.
PMID: 28959331 DOI: 10.15171/ijb.1216

BACKGROUND: Application of membrane technology to wastewater treatment has expanded over the last decades due to increasingly stringent legislation, greater opportunities for water reuse/recycling processes and continuing advancement in membrane technology.
OBJECTIVES: In the present study, a bench-scale submerged microfiltration membrane bioreactor (MBR) was used to assess the treatment of textile wastewater.
MATERIALS AND METHODS: The decolorization capacity of white-rot fungus coriolus versicolor was confirmed through agar plate and liquid batch studies. The temperature and pH of the reactor were controlled at 29±1°C and 4.5±2, respectively. The bioreactor was operated with an average flux of 0.05 m.d(-1) (HRT=15hrs) for a month.
RESULTS: Extensive growth of fungi and their attachment to the membrane led to its fouling and associated increase of the transmembrane pressure requiring a periodic withdrawal of sludge and membrane cleaning. However, stable decoloration activity (approx. 98%), BOD (40-50%), COD (50-67%) and total organic carbon (TOC) removal (>95%) was achieved using the entire system (fungi + membrane), while the contribution of the fungi culture alone for TOC removal, as indicated by the quality of the reactor supernatant, was 35-50% and 70%, respectively.
CONCLUSIONS: The treated wastewater quality satisfied the requirement of water quality for dyeing and finishing process excluding light coloration. Therefore, textile wastewater reclamation and reuse is a promising alternative, which can both conserve or supplement the available water resource and reduce or eliminate the environmental pollution.

Matched MeSH terms: Temperature
Fulltext Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel

Akhtar MN, Khan M, Khan SA, Afzal A, Subbiah R, Ahmad SN, et al.

Materials (Basel), 2021 May 18;14(10).
PMID: 34070060 DOI: 10.3390/ma14102639

In the present investigation, the non-recrystallization temperature (TNR) of niobium-microalloyed steel is determined to plan rolling schedules for obtaining the desired properties of steel. The value of TNR is based on both alloying elements and deformation parameters. In the literature, TNR equations have been developed and utilized. However, each equation has certain limitations which constrain its applicability. This study was completed using laboratory-grade low-carbon Nb-microalloyed steels designed to meet the API X-70 specification. Nb- microalloyed steel is processed by the melting and casting process, and the composition is found by optical emission spectroscopy (OES). Multiple-hit deformation tests were carried out on a Gleeble® 3500 system in the standard pocket-jaw configuration to determine TNR. Cuboidal specimens (10 (L) × 20 (W) × 20 (T) mm3) were taken for compression test (multiple-hit deformation tests) in gleeble. Microstructure evolutions were carried out by using OM (optical microscopy) and SEM (scanning electron microscopy). The value of TNR determined for 0.1 wt.% niobium bearing microalloyed steel is ~ 951 °C. Nb- microalloyed steel rolled at TNR produce partially recrystallized grain with ferrite nucleation. Hence, to verify the TNR value, a rolling process is applied with the finishing rolling temperature near TNR (~951 °C). The microstructure is also revealed in the pancake shape, which confirms TNR.

Matched MeSH terms: Temperature
Fulltext The Effect of Tropical Environment on Fatigue Failure in Royal Malaysian Airforce (RMAF) Aircraft Structure and Operational Readiness

Venugopal A, Mohammad R, Koslan MFS, Sayd Bakar SR, Ali A

Materials (Basel), 2021 May 06;14(9).
PMID: 34066461 DOI: 10.3390/ma14092414

The environmental condition in which the Royal Malaysian Airforce is currently operating its aircraft is prone to corrosion. This is due to the high relative humidity and temperature. With most of its aircraft being in the legacy aircraft era, the aircraft's main construction consists of the aluminium 2024 material. However, this material is prone to corrosion, thus reducing fatigue life and leading to fatigue failure. Using the concept of either Safe Life or Damage Tolerance as its fatigue design philosophy, the RMAF adopts the Aircraft Structure Integrity Program (ASIP) to monitor its structural integrity. With the current problem of not having the structural limitation on corrosion-damaged structure, the RMAF has embarked on its fatigue testing method. Finite Element (FE) studies and flight tests were conducted, and the outcome is summarized. The conclusion is that the longeron tested on the aircraft can withstand the operational load, and its yield strength is below the ultimate yield strength of the material. These research outcomes will also enhance the ASIP for other aircraft platforms in the RMAF fleet for its structure life assessment or service life extension program.

Matched MeSH terms: Temperature
Cu-Doped SnO₂ Nanoparticles: Synthesis and Properties

Sagadevan S, Chowdhury ZZ, Johan MRB, Aziz FA, Roselin LS, Podder J, et al.

J Nanosci Nanotechnol, 2019 Nov 01;19(11):7139-7148.
PMID: 31039868 DOI: 10.1166/jnn.2019.16666

In this work, a simple, co-precipitation technique was used to prepare un-doped, pure tin oxide (SnO₂). As synthesized SnO₂ nanoparticles were doped with Cu2+ ions. Detailed characterization was carried out to observe the crystalline phase, morphological features and chemical constituents with opto-electrical and magnetic properties of the synthesized nanoparticles (NPs). X-ray diffraction analysis showed the existence of crystalline, tetragonal structure of SnO₂. Both the sample synthesized here showed different crystalline morphology. The band gap energy (Eg) of the synthesized sample was estimated and it was found to decrease from 3.60 to 3.26 eV. The band gap energy reduced due to increase in Cu2+ dopant amount inside the SnO₂ lattice. Optical properties were analyzed using absorption spectra and Photoluminescence (PL) spectra. It was observed that Cu2+ ions incorporated SnO₂ NPs exhibited more degradation efficiencies for Rhodamine B (RhB) dye compared to un-doped sample under UV-Visible irradiation. The dielectric characteristics of un-doped, pure and Cu2+ incorporated SnO₂ nanoparticles were studied at different frequency region under different temperatures. The ac conductivity and impedance analysis of pure and Cu2+ incorporated SnO₂ nanoparticles was also studied. The magnetic properties of the synthesized samples were analysed. Both the sample showed ferromagnetic properties. The research indicated that the Cu2+ ions doping can make the sample a promising candidate for using in the field of optoelectronics, magneto electronics, and microwave devices.

Matched MeSH terms: Temperature
Effect of Synthesis Temperature on the Morphologies, Optical and Electrical Properties of MgO Nanostructures

Sagadevan S, Venilla S, Marlinda AR, Johan MR, Wahab YA, Zakaria R, et al.

J Nanosci Nanotechnol, 2020 Apr 01;20(4):2488-2494.
PMID: 31492266 DOI: 10.1166/jnn.2020.17185

Herein, we report the effect of synthesis temperature on the morphologies, optical and electronic properties of magnesium oxide (MgO) nanostructures. The MgO nanostructures were synthesized at different temperatures, i.e., 100 °C, 300 °C, and 600 °C by simple chemical reaction process and their morphology, particle size, optical, and electrical properties were examined by different techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and UV-Vis. spectroscopy. The morphological investigations revealed that various morphologies of MgO nanostructures, i.e., nanoparticles, nanosheet networks, and nanoneedles were synthesized at 100 °C, 300 °C, and 600 °C. The XRD results confirmed that with increasing the synthesis temperature, the crystallinity of the synthesized nanostructures increases. Further, the dielectric properties and AC conductivity at various frequencies for MgO nanostructures were studied which revealed that the dielectric losses decrease with increase in frequency and temperature. In addition, the observed band gap decreases from 4.89 eV to 4.438 eV (100 °C to 600 °C) representing its increase in the conductivity.

Matched MeSH terms: Temperature
Preparation, Stability and Thermal Characteristic of Al₂O₃/Bio-Oil Based Nanofluids for Heat Transfer Applications

Umar S, Sulaiman F, Abdullah N, Mohamad SN

J Nanosci Nanotechnol, 2020 12 01;20(12):7569-7576.
PMID: 32711628 DOI: 10.1166/jnn.2020.18616

Conventional thermal fluids with suspended nanoparticles, known as nanofluids, have been developed for heat transfer applications. Heat transfer loss could be reduced significantly if the thermophysical properties of the heat transfer fluid are improved, which to some extent, could reduce the present global environmental challenges associated with energy utilization, such as climate change and global warming. In this work, the role of the concentration of sodium dodecyl-benzene sulfonate (SDBS) in the stability of Al₂O₃/bio-oil nanofluid is investigated the zeta potential value, and its implications to the viscosity and thermal conductivity of the nanofluid are explored. The bio-oil based nanofluid is fixed using a two-step method in which the prepared base fluid is added with 13-nm alumina nanoparticles powder. Various weight fractions of SDBS (0.1, 0.2, 0.4, 0.6, and 1.0 wt%) are used for both 0.1 and 0.2 wt% Al₂O₃ to investigate the significance of the stability of a nanofluid on its thermal conductivity and viscosity. Results indicate that a stable nanofluid has reduced viscosity and increased thermal conductivity.

Matched MeSH terms: Hot Temperature
Rapid Nucleation of Reduced Graphene Oxide-Supported Palladium Electrocatalysts for Methanol Oxidation Reaction

Ng JC, Tan CY, Ong BH, Matsuda A, Basirun WJ, Tan WK, et al.

J Nanosci Nanotechnol, 2019 Nov 01;19(11):7236-7243.
PMID: 31039881 DOI: 10.1166/jnn.2019.16717

Small sized electrocatalysts, which can be obtained by rapid nucleation and high supersaturation are imperative for outstanding methanol oxidation reaction (MOR). Conventional microwave synthesis processes of electrocatalysts include ultrasonication, stirring, pH adjustment, and microwave irradiation of the precursor mixture. Ethylene glycol (EG), which serves as a reductant and solvent was added during the ultrasonication or stirring stage. However, this step and pH adjustment resulted in unintended multi-stage gradual nucleation. In this study, the microwave reduction approach was used to induce rapid nucleation and high supersaturation in order to fabricate small-sized reduced graphene oxide-supported palladium (Pd/rGO) electrocatalysts via the delayed addition of EG, elimination of the pH adjustment step, addition of sodium carbonate (Na₂CO₃), prior microwave irradiation of the EG mixed with Na₂CO₃, and addition of room temperature precursor mixture. Besides its role as a second reducing agent, the addition of Na₂CO₃ was primarily intended to generate an alkaline condition, which is essential for the high-performance of electrocatalysts. Moreover, the microwave irradiation of the EG and Na₂CO₃ mixture generated highly reactive free radicals that facilitate rapid nucleation. Meanwhile, the room temperature precursor mixture increased supersaturation. Results showed improved electrochemically active surface area (78.97 m² g-1, 23.79% larger), MOR (434.49 mA mg-1, 37.96% higher) and stability.

Matched MeSH terms: Temperature
Effect of Sintering on Di-Electric Characteristics of Al-Cu Doped Cobalt Ferrite Nanoparticles

Dabagh S, Chaudhary K, Haider Z, Ali J

J Nanosci Nanotechnol, 2019 Jul 01;19(7):4142-4146.
PMID: 30764983 DOI: 10.1166/jnn.2019.16331

Aluminium substituted cobalt-copper Co1-xCuxFe2-xAlxO₄, (x ═ 0.8) nanoparticles are grown and sintered at different temperature in the range 600 to 900 °C. XRD analysis on nanoparticles prepared at sintered temperatures of 700 °C and 800 °C confirms the spinel structure and presence of hematite phase (alpha ferrite) in them. The dielectric behaviour of the prepared nano-particles is investigated. Although crystallinity improved with increase in sintering temperature and there was a dielectric loss at higher probe analyser frequency. The synthesized nanoparticles an average particle size of 20-24 nm while the FTIR absorption in regions of 586-595 cm-1 and 450-460 cm-1 indicated the presence of intrinsic vibrations of the tetrahedral and octahedral complexes respectively. Electrical resistivity as a function of temperature confirms the semiconducting nature of the Cu-Al substituted cobalt ferrite, and is attributed to the hopping mechanism between Fe2+ Fe3+ ions and Co2+ Cu2+, Co2+ Al3+. The lower values of dielectric constants and dielectric losses make Al-Cu doped cobalt ferrite, a potential material for microwave and radio wave absorber applications.

Matched MeSH terms: Temperature

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links