Displaying publications 161 - 180 of 260 in total

Abstract:
Sort:
  1. Yong HS, Mak JW
    Experientia, 1984 Aug 15;40(8):833-4.
    PMID: 6468590
    Glucose phosphate isomerase of subperiodic Brugia malayi was studied by horizontal starch-gel electrophoresis. Two heterophenotypes, each represented by 3 bands of enzyme activity, were found among 38 parasites studied. This finding is attributed to the occurrence of 2 Gpi gene loci.
    Matched MeSH terms: Electrophoresis, Starch Gel
  2. Yong HS, Yao L, Dhaliwal SS, Cheong WH, Chiang GL
    Comp. Biochem. Physiol., B, 1983;75(1):43-5.
    PMID: 6406135
    1. A total of 8 samples from three natural populations and a laboratory strain of Aedes albopictus were analysed for glycerol-3-phosphate dehydrogenase phenotypes by means of horizontal starch-gel electrophoresis. 2. The electrophoretic phenotypes were governed by three codominant Gpd alleles. 3. There was low variability, with the heterozygosity in the variable samples ranging from 0.02 to 0.12. 4. The commonest allele in all the population samples was GpdB which encoded an electrophoretic band with intermediate mobility. 5. There was no temporal or spatial variation.
    Matched MeSH terms: Electrophoresis, Starch Gel
  3. Fix AG, Lie-injo LE
    Am. J. Phys. Anthropol., 1975 Jul;43(1):47-55.
    PMID: 1155591
    Blood samples, demographic and cultural data were collected from seven settlements of Semai Senoi, a swidden farming ethnic group of Malaysia. Three genetic loci (ABO blood group, hereditary ovalcytosis, and hemoglobin) were analyzed in a total sample of 546 individuals. These data indicate a considerable degree of genetic microdifferentiation in this area of the Semai distribution. Parent-offspring birthplace data (analyzed by means of a migration matrix) and settlement histories show that settlements are not strongly isolated. Genetic differences in the study area demonstrate a reasonable correspondence with migration and the history of the settlements. Genetic convergence also occurs through the addition of migrant groups to established populations leading to new patterns of marriage between donor and recipient groups. The genetic structure of the total Semai population through time thus comprises a mosaic of shifiting allele frequencies in a series of semi-isolated local populations.
    Matched MeSH terms: Electrophoresis, Starch Gel
  4. Lie-Injo LE
    Med J Malaya, 1972 Dec;27(2):120-4.
    PMID: 4268037
    Matched MeSH terms: Electrophoresis, Starch Gel
  5. Jau CL, Wan Aizan Wan Abdul Rahman, Avérous L, Teck HL
    Sains Malaysiana, 2016;45:633-641.
    This paper reports the post-processing ageing phenomena of thermoplastic sago starch (TPS) and plasticised sago pith waste (SPW), which were processed using twin-screw extrusion and compression moulding techniques. Wide angle X-ray diffraction (XRD) analyses showed that after processing, starch molecules rearranged into VH-type (which was formed rapidly right post processing and concluded within 4 days) and B-type (which was formed slowly over a period of months) crystallites. Evidence from Fourier transform infrared spectroscopy (FTIR) analyses corroborated the 2-stage crystallisation process, which observed changes in peak styles and peak intensities (at 1043 and 1026 cm-1) and bandnarrowing. Thermogravimetric analysis (TGA) studies showed that the thermal stability of plasticised SPW declined continuously for 90 days before gradual increments ensued. For all formulations tested, post-processing ageing led to drastic changes in the tensile strength (increased) and elongation at break (decreased). Glycerol and fibres restrained the retrogradation of starch molecules in TPS and SPW.
    Matched MeSH terms: Starch
  6. Roberts AD, Brackley CA
    J Dent, 1996 Sep;24(5):339-43.
    PMID: 8916648
    OBJECTIVES: A survey of general dental practitioners and dental surgery assistants was carried out to ascertain their preferences and opinions on powder-free hydrogel-coated gloves compared with starch-powdered gloves. The aim was to relate the survey findings to laboratory measurements of the frictional characteristics of glove inner surfaces and their water absorptive capability.

    METHODS: The survey was carried out using a questionnaire given to local dental practitioners. Glove friction and water absorption measurements were made using specially designed equipment.

    RESULTS: The survey showed that a selected group of dentist and dental surgery assistants preferred hydrogel-coated gloves, particularly for damp donning, durability and long-term wear comfort. Laboratory measurements showed that the hydrogel coating gave a low friction coefficient against damp skin. The coating was durable, and absorbed water more readily than other treatments.

    CONCLUSION: A survey of dental practitioners and dental surgery assistants and laboratory measurements indicates that hydrogel-coated gloves have superior properties, and are preferred to other non-sterile glove types.

    Matched MeSH terms: Starch
  7. Siti Suhara Ramli, Aini `Izzati Mohd Rosdi
    ESTEEM Academic Journal, 2019;15(1):64-75.
    MyJurnal
    Fried banana is one of the popular local snacks in Malaysia. However, tremendous interest in healthy food has risen among consumers and producers resulting in a rising demand for low-fat foods. Thus, oil uptake needs to be considered during frying since it also affects the flavour, odour
    and general organoleptic properties of the food. The main objective of this study is to determine the effect of different concentrations of sugar beet pectin in the frying batter of fried banana and introduce the new usage of sugar beet pectin as one of the ingredients in the frying batter. Three different formulations of frying batter were prepared using 1%, 1.5% and 2% of sugar beet pectin (SBP) together with other ingredients including rice flour, water, plain flour, baking powder and salt. The addition of sugar beet pectin improved the characteristic of the batter as well as the fried banana crust. The moisture content of the crust increased about 7.6% when 1.5% SBP (F2) was used in the formulation thereby reducing the oil absorption by 8.5%. The crust crispiness also increased by 16.7% when 1.5% SBP (F2) was added to the frying batter formulation. Batter pick-up value was found highest in F1 (1% SBP) with 8.84% increment as compared to batter with no added hydrocolloids. Addition of SBP in batter formulations significantly increased the batter pick-up value. In terms of acceptability, F1 (1% SBP) was the most preferred by the panellist which was due to the appearance and colour of the fried bananas. All formulations obtained attributes scores higher than six thus were accepted by the panellists.
    Matched MeSH terms: Starch
  8. Alrimawi BH, Chan MY, Ooi XY, Chan SY, Goh CF
    Polymers (Basel), 2021 Feb 15;13(4).
    PMID: 33671895 DOI: 10.3390/polym13040578
    Rice starch is a promising biomaterial for thin film development in buccal drug delivery, but the plasticisation and antiplasticisation phenomena from both plasticisers and drugs on the performance of rice starch films are not well understood. This study aims to elucidate the competing effects of sorbitol (plasticiser) and drug (antiplasticiser) on the physicochemical characteristics of rice starch films containing low paracetamol content. Rice starch films were prepared with different sorbitol (10, 20 and 30% w/w) and paracetamol contents (0, 1 and 2% w/w) using the film casting method and were characterised especially for drug release, swelling and mechanical properties. Sorbitol showed a typical plasticising effect on the control rice starch films by increasing film flexibility and by reducing swelling behaviour. The presence of drugs, however, modified both the mechanical and swelling properties by exerting an antiplasticisation effect. This antiplasticisation action was found to be significant at a low sorbitol level or a high drug content. FTIR investigations supported the antiplasticisation action of paracetamol through the disturbance of sorbitol-starch interactions. Despite this difference, an immediate drug release was generally obtained. This study highlights the interplay between plasticiser and drug in influencing the mechanical and swelling characteristics of rice starch films at varying concentrations.
    Matched MeSH terms: Starch
  9. Nur Azura AB, Yusoff M, Tan GY, Jegadeesh R, Appleton DR, Vikineswary S
    J Ind Microbiol Biotechnol, 2016 Apr;43(4):485-93.
    PMID: 26721619 DOI: 10.1007/s10295-015-1724-4
    Actinomycete strain AUM 00500 was 99.5 % similar to Streptomyces sanglieri NBRC 100784(T) and was evaluated for antagonistic activity towards Ganoderma boninense, the causative fungus of basal stem rot of oil palm. The strain showed strong antifungal activity towards G. boninense in in vitro and SEM analysis showed various modes of inhibition of the fungus. Ethyl acetate extracts of single culture and inhibition zone of cross-plug culture by HPLC indicated that strain AUM 00500 produced two different antibiotics of the glutarimide group namely cycloheximide and actiphenol. In greenhouse trials, oil palm seed treated with spores of S. sanglieri strain AUM 00500 at 10(9) cfu/ml showed significant (P starch casein agar.
    Matched MeSH terms: Starch
  10. Lai DS, Osman AF, Adnan SA, Ibrahim I, Alrashdi AA, Ahmad Salimi MN, et al.
    Polymers (Basel), 2021 Mar 15;13(6).
    PMID: 33803984 DOI: 10.3390/polym13060897
    Thermoplastic starch (TPS) hybrid bio-composite films containing microcrystalline cellulose (C) and nano-bentonite (B) as hybrid fillers were studied to replace the conventional non-degradable plastic in packaging applications. Raw oil palm empty fruit bunch (OPEFB) was subjected to chemical treatment and acid hydrolysis to obtain C filler. B filler was ultra-sonicated for better dispersion in the TPS films to improve the filler-matrix interactions. The morphology and structure of fillers were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). TPS hybrid bio-composite films were produced by the casting method with different ratios of B and C fillers. The best ratio of B/C was determined through the data of the tensile test. FTIR analysis proved the molecular interactions between the TPS and the hybrid fillers due to the presence of polar groups in their structure. XRD analysis confirmed the intercalation of the TPS chains between the B inter-platelets as a result of well-developed interactions between the TPS and hybrid fillers. SEM images suggested that more plastic deformation occurred in the fractured surface of the TPS hybrid bio-composite film due to the higher degree of stretching after being subjected to tensile loading. Overall, the results indicate that incorporating the hybrid B/C fillers could tremendously improve the mechanical properties of the films. The best ratio of B/C in the TPS was found to be 4:1, in which the tensile strength (8.52MPa), Young's modulus (42.0 MPa), elongation at break (116.4%) and tensile toughness of the film were increased by 92%, 146%, 156% and 338%, respectively. The significantly improved strength, modulus, flexibility and toughness of the film indicate the benefits of using the hybrid fillers, since these features are useful for the development of sustainable flexible packaging film.
    Matched MeSH terms: Starch
  11. Yasmin F, Tamrin KF, Sheikh NA, Barroy P, Yassin A, Khan AA, et al.
    Materials (Basel), 2021 Mar 09;14(5).
    PMID: 33803364 DOI: 10.3390/ma14051311
    Laser-assisted high speed milling is a subtractive machining method that employs a laser to thermally soften a difficult-to-cut material's surface in order to enhance machinability at a high material removal rate with improved surface finish and tool life. However, this machining with high speed leads to high friction between workpiece and tool, and can result in high temperatures, impairing the surface quality. Use of conventional cutting fluid may not effectively control the heat generation. Besides, vegetable-based cutting fluids are invariably a major source of food insecurity of edible oils which is traditionally used as a staple food in many countries. Thus, the primary objective of this study is to experimentally investigate the effects of water-soluble sago starch-based cutting fluid on surface roughness and tool's flank wear using response surface methodology (RSM) while machining of 316 stainless steel. In order to observe the comparison, the experiments with same machining parameters are conducted with conventional cutting fluid. The prepared water-soluble sago starch based cutting fluid showed excellent cooling and lubricating performance. Therefore, in comparison to the machining using conventional cutting fluid, a decrease of 48.23% in surface roughness and 38.41% in flank wear were noted using presented approach. Furthermore, using the extreme learning machine (ELM), the obtained data is modeled to predict surface roughness and flank wear and showed good agreement between observations and predictions.
    Matched MeSH terms: Starch
  12. Syafiq R, Sapuan SM, Zuhri MYM, Ilyas RA, Nazrin A, Sherwani SFK, et al.
    Polymers (Basel), 2020 Oct 19;12(10).
    PMID: 33086533 DOI: 10.3390/polym12102403
    Recently, many scientists and polymer engineers have been working on eco-friendly materials for starch-based food packaging purposes, which are based on biopolymers, due to the health and environmental issues caused by the non-biodegradable food packaging. However, to maintain food freshness and quality, it is necessary to choose the correct materials and packaging technologies. On the other hand, the starch-based film's biggest flaws are high permeability to water vapor transfer and the ease of spoilage by bacteria and fungi. One of the several possibilities that are being extensively studied is the incorporation of essential oils (EOs) into the packaging material. The EOs used in food packaging films actively prevent inhibition of bacteria and fungi and have a positive effect on food storage. This work intended to present their mechanical and barrier properties, as well as the antimicrobial activity of anti-microbacterial agent reinforced starch composites for extending product shelf life. A better inhibition of zone of antimicrobial activity was observed with higher content of essential oil. Besides that, the mechanical properties of starch-based polymer was slightly decreased for tensile strength as the increasing of essential oil while elongation at break was increased. The increasing of essential oil would cause the reduction of the cohesion forces of polymer chain, creating heterogeneous matrix and subsequently lowering the tensile strength and increasing the elongation (E%) of the films. The present review demonstrated that the use of essential oil represents an interesting alternative for the production of active packaging and for the development of eco-friendly technologies.
    Matched MeSH terms: Starch
  13. Hasan M, Hanafiah MM, Alhilfy IHH, Aeyad Taha Z
    PeerJ, 2021;9:e10614.
    PMID: 33520446 DOI: 10.7717/peerj.10614
    Background: Laser applications in agriculture have recently gained much interest due to improved plant characteristics following laser treatment before the sowing of seeds. In this study, maize seeds were exposed to different levels of laser treatment prior to sowing to improve their field performance. The aim of this study is to evaluate the impact of pre-sowing laser photobiomodulation on the field emergence and growth of treated maize seeds.

    Methods: The maize seeds were first photobiomodulated with two lasers: 1) a helium-neon (He-Ne) red laser (632.8 nm), and 2) a neodymium-doped yttrium aluminum garnet (Nd:YAG) green laser (532 nm). Following three replications of randomized complete block design (RCBD), four irradiation treatments were applied (45 s, 65 s, 85 s, and 105 s) at two power intensities (2 mW/cm2 and 4 mW/cm2).

    Results: Based on the results, maize seeds pretreated with a green laser and 2 mW/cm2 power intensity for 105 s exhibited the highest rate of seed emergence (96%) compared to the untreated control seeds with a lower seed emergence rate (62.5%). Furthermore, maize seeds treated with a red laser for 45 s showed an increased vigor index compared to the other treatment options and the control (P starch contents of the seeds irradiated with the green laser were 17.54%, 6.18%, and 73.32%, respectively, compared to the seeds irradiated by the red laser with 16.51%, 6.33%, and 71.05%, respectively.

    Conclusions: The photo biomodulation of maize seeds using a green laser light can improve the field emergence, seedling growth, and seed quality of the treated seed compared to the red laser treatment.

    Matched MeSH terms: Starch
  14. Othman SH, Othman NFL, Shapi'i RA, Ariffin SH, Yunos KFM
    Polymers (Basel), 2021 Jan 27;13(3).
    PMID: 33513664 DOI: 10.3390/polym13030390
    This work aims to develop corn starch/chitosan nanoparticles/thymol (CS/CNP/Thy) bio-nanocomposite films as potential food packaging materials that can enhance the shelf life of food. CS/CNP/Thy bio-nanocomposite films were prepared by the addition of different concentrations of thymol (0, 1.5, 3.0, 4.5 w/w%) using a solvent casting method. The resulting films were characterized in terms of optical, mechanical, and water vapor permeability (WVP) properties. The addition of thymol was found to reduce the tensile strength (TS), elongation at break (EAB), and Young's modulus (YM) of the films. Generally, the increment in the concentration of thymol did not significantly affect the TS, EAB, and YM values. The addition of 1.5 w/w% thymol increased the WVP of the films but the WVP reduced with the increase in thymol concentrations. CS/CNP/Thy-3% bio-nanocomposite films demonstrated the potential to lengthen the shelf life of cherry tomatoes packed with the films, whereby the cherry tomatoes exhibited no significant changes in firmness and the lowest weight loss. In addition, no mold growth was observed on the sliced cherry tomatoes that were in direct contact with the films during 7 days of storage, proving the promising application of the films as active food packaging materials.
    Matched MeSH terms: Starch
  15. Aziman N, Kian LK, Jawaid M, Sanny M, Alamery S
    Polymers (Basel), 2021 Jan 27;13(3).
    PMID: 33513665 DOI: 10.3390/polym13030391
    The development of antimicrobial film for food packaging application had become the focus for researchers and scientists. This research aims to study the characteristics and antimicrobial activity of novel biofilms made of poly (butylene succinate) (PBS) and tapioca starch (TPS) added with 1.5% or 3% of Biomaster-silver (BM) particle. In morphological examination, the incorporation of 3% BM particle was considerably good in forming well-structured PBS film. Meanwhile, the functional groups analysis revealed the 3% BM particle was effectively interacted with PBS molecular chains. The flame retard behavior of BM metal particle also helped in enhancing the thermal stability for pure PBS and PBS/TPS films. The nucleating effect of BM particles had improved the films crystallinity. Small pore size features with high barrier property for gas permeability was obtained for BM filled PBS/TPS films. From antimicrobial analysis, the BM particles possessed antimicrobial activity against three bacteria Staphylococcus aureus, Escherichia coli, and Salmonella Typhimurium in which PBS/TPS 3% BM film exhibited strong antimicrobial activity against all tested bacteria, however, PBS/TPS 1.5% BM film exhibited strong antimicrobial activity against E. coli only. Hence, the incorporation of BM into PBS/TPS film could be a sustainable way for developing packaging films to preserve food products.
    Matched MeSH terms: Starch
  16. Elgadir MA, Bakar J, Zaidul ISM, Rahman RA, Abbas KA, Hashim DM, et al.
    Compr Rev Food Sci Food Saf, 2009 Jul;8(3):195-201.
    PMID: 33467796 DOI: 10.1111/j.1541-4337.2009.00078.x
      This review article highlights the thermal behaviors of selected starches that were studied using differential scanning calorimetery (DSC) with data shown in various research publications. The starches of sago, potato, sweet potato, cassava, yam, and corn are included in this overview. Our examinations indicate that thermal properties are highly affected by the type of starch, its amylose/amylopectin content, and the presence of other food ingredients such as sugar, sodium chloride, water, milk, hydrocolloids, and meat. When the heating temperatures of the starches were increased, the DSC measurements also showed an increase in the temperatures of the gelatinization (onset [To ], peak [Tp ], and conclusion [Tc ]). This may be attributed to the differences in the degree of crystallinity of the starch, which provides structural stability and makes the granule more resistant to gelatinization.
    Matched MeSH terms: Starch
  17. Syed FNN, Zakaria MH, Bujang JS, Christianus A
    Int J Food Sci, 2021;2021:8825970.
    PMID: 33553420 DOI: 10.1155/2021/8825970
    Several aquatic macrophytes such as Colocasia esculenta, Eleocharis dulcis, Nelumbo nucifera, Sagittaria sagittifolia, Trapa bispinosa, and Typha angustifolia possessed carbohydrate mainly in their storage and reproductive parts. Starch morphology, total starch, and amylose content of these six freshwater plant species were determined. Their functional properties, i.e., starch crystallinity, thermal properties, and rheological behaviour were assessed. Large starch granules were in N. nucifera rhizome (>15 μm), medium-sized was N. nucifera seed (8-18 μm), while the rest of the starches were small starch granules (<8 μm). Shapes of the starch granules varied from oval and irregular with centric hilum to elongated granules with the eccentric hilum. Eleocharis dulcis corm starch had significantly higher total starch content (90.87%), followed by corms of C. esculenta (82.35%) and S. sagittifolia (71.71%). Nelumbo nucifera seed starch had significantly higher amylose content (71.45%), followed by T. angustifolia pollen (36.47%). In comparison, the waxy starch was in N. nucifera rhizome (7.63%), T. bispinosa seed (8.83%), C. esculenta corm (10.61%), and T. angustifolia rhizome (13.51%). Higher resistant starch was observed mostly in rhizomes of N. nucifera (39.34%)>T. angustifolia (37.19%) and corm parts of E. dulcis (37.41%)>S. sagittifolia (35.09%) compared to seed and pollen starches. The XRD profiles of macrophytes starches displayed in all the corms and N. nucifera seed had A-type crystallinity. The T. bispinosa seed had CA-type, whereas the rest of the starches exhibited CB-type crystallinity. Waxy starches of C. esculenta corm had higher relative crystallinity (36.91%) and viscosity (46.2 mPa s) than regular starches. Based on thermal properties, high-amylose of N. nucifera seed and T. angustifolia pollen resulted in higher gelatinization enthalpy (19.93 and 18.66 J g-1, respectively). Starch properties showed equally good potential as commercial starches in starch-based food production based on their starch properties and functionality.
    Matched MeSH terms: Starch
  18. Cheng, S. H., Sarbon, N. M.
    MyJurnal
    The aim of the present work was to develop chicken skin gelatin films incorporated with
    different concentrations of rice starch prepared by casting techniques. Six film-forming
    solutions were prepared separately with different blend ratios of chicken skin gelatin to rice
    starch: A (0/100), B (5/100), C (10/100), D (15/100), E (20/100), and F (25/100). The
    rheological properties of the film-forming solutions (FFS) were determined using frequency
    sweep. The mechanical and physical properties of the respective films were also evaluated.
    With the increase in rice starch concentration, the storage (G’) modulus of FFS increased
    dramatically with loss (G”) modulus as the oscillatory frequency rising to contribute to gel
    behaviour (G’ > G”). As rice starch concentration increased, the chicken skin gelatin films
    also demonstrated higher tensile strength, elongation at break, and water vapour permeability,
    but reduced the solubility of gelatin films in water. Additionally, elevation in melting point
    values indicated that the thermal stability of the composite films was enhanced with the
    increment of rice starch concentration. Film F (with 25% rice starch) yielded the optimal film
    formulation, as it had the highest tensile strength and a high elongation at break value. Thus,
    film F shows the best potential as a film for food packaging.
    Matched MeSH terms: Starch
  19. Jumaidin R, Diah NA, Ilyas RA, Alamjuri RH, Yusof FAM
    Polymers (Basel), 2021 Apr 28;13(9).
    PMID: 33924842 DOI: 10.3390/polym13091420
    Increasing environmental concerns have led to greater attention to the development of biodegradable materials. The aim of this paper is to investigate the effect of banana leaf fibre (BLF) on the thermal and mechanical properties of thermoplastic cassava starch (TPCS). The biocomposites were prepared by incorporating 10 to 50 wt.% BLF into the TPCS matrix. The samples were characterised for their thermal and mechanical properties. The results showed that there were significant increments in the tensile and flexural properties of the materials, with the highest strength and modulus values obtained at 40 wt.% BLF content. Thermogravimetric analysis showed that the addition of BLF had increased the thermal stability of the material, indicated by higher-onset decomposition temperature and ash content. Morphological studies through scanning electron microscopy (SEM) exhibited a homogenous distribution of fibres and matrix with good adhesion, which is crucial in improving the mechanical properties of biocomposites. This was also attributed to the strong interaction of intermolecular hydrogen bonds between TPCS and fibre, proven by the FT-IR test that observed the presence of O-H bonding in the biocomposite.
    Matched MeSH terms: Starch
  20. Roslan MAM, Jefri NQUA, Ramlee N, Rahman NAA, Chong NHH, Bunawan H, et al.
    Saudi J Biol Sci, 2021 May;28(5):3001-3012.
    PMID: 34012331 DOI: 10.1016/j.sjbs.2021.02.041
    Food waste (FW) minimization at the source by using food waste biodigester (FWBs) has a vast potential to lower down the impact of increasing organic fraction in municipal solid waste generation. To this end, this research sought to check the performance of locally isolated hydrolase-producing bacteria (HPB) to improve food waste biodegradation rate. Two under-explored HPB identified as Bacillus paralicheniformis GRA2 and Bacillus velezensis TAP5 were able to produce maximum amylase, cellulase, protease and lipase activities, and demonstrated a significant hydrolase synergy in co-culture fermentation. In vitro biodegradation analysis of both autoclaved and non-autoclaved FW revealed that the HPB inoculation was effective to degrade total solids (>62%), protein (>19%), total fat (>51), total sugar (>86%), reducing sugar (>38%) and starch (>50%) after 8-day incubation. All co-culture treatments were recorded superior to the respective monocultures and the uninoculated control. The results of FW biodegradation using batch-biodigester trial indicated that the 1500 mL and 1000 mL inoculum size of HPB inoculant reached a plateau on the 4th day, with gross biodegradation percentage (GBP) of >85% as compared to control (66.4%). The 1000 mL inoculum was sufficient to achieve the maximum GBP (>90%) of FW after an 8-day biodigestion in a FWB.
    Matched MeSH terms: Starch
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links