Displaying all 7 publications

Abstract:
Sort:
  1. Mashaan NS, Karim MR, Abdel Aziz M, Ibrahim MR, Katman HY, Koting S
    ScientificWorldJournal, 2014;2014:968075.
    PMID: 25050406 DOI: 10.1155/2014/968075
    Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test), dynamic creep (repeated load creep), and fatigue test (indirect tensile fatigue test) at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa). Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.
  2. Ibrahim MR, Katman HY, Karim MR, Koting S, Mashaan NS
    ScientificWorldJournal, 2014;2014:240786.
    PMID: 24574875 DOI: 10.1155/2014/240786
    The main objective of this paper is to investigate the relations of rubber size, rubber content, and binder content in determination of optimum binder content for open graded friction course (OGFC). Mix gradation type B as specified in Specification for Porous Asphalt produced by the Road Engineering Association of Malaysia (REAM) was used in this study. Marshall specimens were prepared with four different sizes of rubber, namely, 20 mesh size [0.841 mm], 40 mesh [0.42 mm], 80 mesh [0.177 mm], and 100 mesh [0.149 mm] with different concentrations of rubberised bitumen (4%, 8%, and 12%) and different percentages of binder content (4%-7%). The appropriate optimum binder content is then selected according to the results of the air voids, binder draindown, and abrasion loss test. Test results found that crumb rubber particle size can affect the optimum binder content for OGFC.
  3. Koting S, Karim MR, Mahmud H, Mashaan NS, Ibrahim MR, Katman H, et al.
    ScientificWorldJournal, 2014;2014:596364.
    PMID: 24526911 DOI: 10.1155/2014/596364
    Semi-flexible pavement surfacing is a composite pavement that utilizes the porous pavement structure of the flexible bituminous pavement, which is subsequently grouted with appropriate cementitious materials. This study aims to investigate the compressive strength, flexural strength, and workability performance of cementitious grout. The grout mixtures are designed to achieve high strength and maintain flow properties in order to allow the cement slurries to infiltrate easily through unfilled compacted skeletons. A paired-sample t-test was carried out to find out whether water/cement ratio, SP percentages, and use of silica fume influence the cementitious grout performance. The findings showed that the replacement of 5% silica fume with an adequate amount of superplasticizer and water/cement ratio was beneficial in improving the properties of the cementitious grout.
  4. Ibrahim MR, Singh S, Merican AM, Raghavendran HR, Murali MR, Naveen SV, et al.
    BMC Vet Res, 2016 Jun 16;12(1):112.
    PMID: 27307015 DOI: 10.1186/s12917-016-0724-6
    Fracture healing in bone gap is one of the major challenges encountered in Orthopedic Surgery. At present, the treatment includes bone graft, employing either internal or external fixation which has a significant impact on the patient, family and even society. New drugs are emerging in the markets such as anabolic bone-forming agents including teriparatide and strontium ranelate to stimulate bone growth. Based on the mechanism of their actions, we embarked on a study on the healing of a fractured ulna with bone gap in a rabbit model. We segregated ten rabbits into two groups: five rabbits in the test group and five rabbits in the control group. We created a 5 mm bone gap in the ulna bone, removing the periosteum as well. Rabbits in the test group received 450 mg/kg of strontium ranelate via oral administration, daily, for six weeks. The x-rays, CT scans and blood tests were performed every two weeks. At the end of six weeks, the rabbits were sacrificed, and the radius and ulna bones harvested for histopathological examination.
  5. Arvind M, Dharmaraj B, Ibrahim MR, Nijhar JS, Azizi ZA
    Med J Malaysia, 2016 Aug;71(4):203-205.
    PMID: 27770121
    Meckel's diverticulitis or Meckel's associated pathology frequently presents in childhood with gastrointestinal bleeding. It is rarely seen in adults. It is a congenital abnormality that commonly goes undetected. We present a case of a perforated Meckel's diverticulum due to fishbone ingestion in an elderly gentleman. The aim of this case report is to highlight the rare presentation of a perforation in a Meckel's diverticulum due to an extrinsic pathology and to outline diagnostic and management options in cases of Meckel's diverticulum.
  6. Janahiraman S, Tay CY, Lee JM, Lim WL, Khiew CH, Ishak I, et al.
    BMJ Open Gastroenterol, 2020 05;7(1).
    PMID: 32371502 DOI: 10.1136/bmjgast-2020-000376
    OBJECTIVE: Preprocedural bowel preparation is necessary for optimal colonoscopy visualisation. However, it is challenging to achieve high-quality bowel preparation among patients scheduled for colonoscopy. This study aims to evaluate the impact of an intensive patient educational programme on the quality of bowel preparation.

    DESIGN: An accessor-blinded randomised controlled trial was carried out at the outpatient surgical clinic of a tertiary hospital. Patients were randomly assigned to the control group (received standard written and verbal instructions) or the experimental group (received an intensive and structured educational programme). All subjects completed a questionnaire before colonoscopy to assess their compliance, acceptability, and tolerability towards bowel preparation regime. Quality of bowel preparation was determined using the Boston Bowel Preparation Scale (BBPS).

    RESULTS: A total of 300 subjects who fulfilled the inclusion criteria were recruited. The experimental group had a significantly higher proportion of good quality bowel preparation than the control group (98.7% vs 52.3%, p<0.001). The median total BBPS score was also significantly higher in the experimental group (8 vs 5, p<0.001). Factors associated with good quality of bowel preparation included educational programme (OR: 22.79, 95% CI: 4.23 to 122.85, p<0.001), compliance to bowel cleansing agent (OR: 24.98, 95% CI 3.12 to 199.71, p<0.001), very difficult acceptability of preparation (OR: 0.11, 95% CI 0.03 to 0.38, p<0.001), tolerability towards bowel preparation (OR: 4.98, 95% CI 1.44 to 17.20, p<0.011) and hypomotility drugs (OR: 3.03, 95% CI 0.12 to 0.91, p<0.05).

    CONCLUSION: An intensive patient educational programme can significantly improve the quality of bowel preparation for colonoscopy.

  7. Abd Karim SB, Norman S, Koting S, Simarani K, Loo SC, Mohd Rahim FA, et al.
    Materials (Basel), 2023 Aug 08;16(16).
    PMID: 37629806 DOI: 10.3390/ma16165515
    The rapid economic and industrial growth experienced in the Asian region has significantly increased waste production, particularly single-use plastic. This surge in waste poses a significant challenge for these countries' municipal solid waste management systems. Consequently, there is a pressing need for progressive and effective solutions to address the plastic waste issue. One promising initiative involves utilizing used plastic to produce components for asphalt pavement. The concept of plastic road technology has gained traction in Asia, with 32 countries displaying varying levels of interest, ranging from small-scale laboratory experiments to large-scale construction projects. However, as a relatively new technology, plastic road implementation requires continuous and comprehensive environmental and health risk assessments to ascertain its viability as a reliable green technology. This review paper presents the current findings and potential implementation of plastic-modified asphalt in Asian countries, with particular attention given to its environmental and human health impacts. While plastic asphalt roads hold promise in waste reduction, improved asphalt properties, and cost savings, it is imperative to thoroughly consider the environmental and health impacts, quality control measures, recycling limitations, and long-term performance of this road construction material. Further research and evaluation are needed to fully understand the viability and sustainability of plastic asphalt roads. This will enable a comprehensive assessment of its potential benefits and drawbacks, aiding in developing robust guidelines and standards for its implementation. By addressing these considerations, it will be possible to optimize the utilization of plastic waste in road construction and contribute to a greener and more sustainable future.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links