Displaying publications 1 - 20 of 21 in total

Abstract:
Sort:
  1. Azizah Murtuzah Shekh, Noor Azlin Yahya
    Ann Dent, 2019;26(1):1-7.
    MyJurnal
    The study aimed to evaluate the shear bond strength (SBS) and to analyse the failure mode at the resin-dentine interface of different dental adhesive systems. A total of 75 sound premolar teeth were selected and randomly assigned into five different adhesive groups (n=15): OptiBond Solo (OBS, total-etch), OptiBond Versa (OBV, two-bottles, self-etch), Adhe SE Ivoclar (ADHE, two-bottles, self-etch), G-Bond (GB, one-bottle, self-etch), and OptiBond All in One (OBO, one-bottle, self-etch). The occlusal surface of each tooth was flattened and composite resin cylinder (4x2 mm) was built up on the flat dentine surface using a custom made mould. The specimens were then subjected to 500 thermal cycles between 5 °C and 55 °C and dwell time of 20s. The SBS test was conducted using a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed using one-way ANOVA and Dunnett T3 Test. Failure mode was determined as adhesive, cohesive or mixed mode using a stereomicroscope and the data were analyzed using Fisher's exact test. The total-etch (OBS) had significantly higher value of SBS than the two self-etch (ADHE and GB) adhesive systems. Within the self-etch systems, OBV showed significantly higher SBS value compared to ADHE and GB. There were no statistically significant differences between types of failure mode (p > 0.05) and adhesive group. It can be concluded that the different compositions in the self-etch adhesive materials may contribute to the different SBS value. The failure modes detected within all tested groups did not show clinically important differences.
  2. E.Suhartiningsih, Sarimah, Noor Azlin, Norly Marlia, Nasirin
    MyJurnal
    Inap Desa adalah merupakan produk pelancongan yang menyediakan perkhidmatan penginapan kepada para pelancong. Perkhidmatan ini biasanya disediakan di destinasi pelancongan yang terletak jauh daripada bandar. Memandangkan destinasi pelancongan ini terletak di pinggir bandar / luar bandar dan tidak mempunyai perkhidmatan penginapan seperti hotel, resort dan chalet, masyarakat kampung telah mengambil inisiatif untuk menyediakan kemudahan penginapan di kawasan mereka. Walaupun Pengusaha Inap Desa mempunyai pengetahuan yang sedikit mengenai industri pelancongan, tetapi mereka mempunyai semangat untuk bersama-sama memajukan industri ini dengan bantuan dari kerajaan dan juga sektor swasta. Berdasarkan pada beberapa kajian lepas, kebanyakan kajian hanya melaporkan kejayaan Inap Desa yang hanya memberi tumpuan kepada beberapa destinasi Inap Desa yang terkenal sahaja walaupun terdapat lebih banyak Inap Desa yang tersenarai berdasarkan rekod di Kementerian Kebudayaan, Seni dan Pelancongan. Oleh itu, keperluan penyelidikan lebih lanjut perlu dilakukan untuk meningkatkan pembangunan Inap Desa di Melaka. Setiap komuniti Inap Desa menghadapi cabaran yang sama atau berbeza dalam mengurus operasi kerana mereka mungkin menawarkan pakej yang berbeza. Oleh itu, majoriti penyelidikan yang sedia ada berkemungkinan untuk berat sebelah kerana saiz sampel adalah agak kecil yang berkemungkinan tidak sesuai mewakili seluruh program Inap Desa di Malaysia. Oleh yang demikian, objektif kajian ini adalah untuk mengkaji kesan pembangunan Inap Desa kepada masyarakat terutama dalam menggalakkan penyertaan masyarakat dan untuk melihat hubungan antara ekonomi dan budaya terhadap pembangunan Inap Desa. Kajian ini menggunakan kaedah pensampelan rawak berstrata dimana sembilan (9) Inap Desa dipilih di bawah penyeliaan MOTAC . Keputusan kajian ini menunjukkan bahawa hanya budaya memberi sumbangan besar kepada pembangunan Inap Desa.
  3. Mohd Shahminan Ibrahim, Wen, Yap Kai, Gonzalez, Maria Angela Garcia, Noor Azlin Yahya
    Ann Dent, 2020;27(1):41-49.
    MyJurnal
    This study compared the surface roughness of selected tooth coloured restorative materials that were polished according to manufacturers’ instructions and Sof-Lex. It also assessed the surface roughness of polished materials after thermocycling.Filtek Z350XT, Beautifil-Bulk Restorative and Cention N, were used in this study. A stainless steel mould (10mm diameter x 2mm height) was used to fabricate 75 cylindrical specimens: 15 Filtek Z350XT (FZ), 30 Beautifil-Bulk Restorative (BB) and 30 Cention N (CN). All 15 FZ specimens were polished with Sof-Lex. Fifteen BB and CN specimens were polished according to manufacturers’ instructions. The remaining fifteen BB and CN specimens were polished using Sof-Lex. All the specimens were subjected to thermocycling (1000 cycles). Surface roughness was assessed quantitatively with profilometry after specimen preparation (Mylar stage), polishingand thermocycling. Data were analysed using SPSS version 25.0 at α=0.05. When polished according to manufacturers’ instructions, BB had the lowest mean surface roughness (Ra) values (0.13±0.01μm) followed sequentially by CN (0.14±0.03μm) and FZ (0.15±0.02μm). The differences were not statistically significant. When polished with Sof-Lex, BB exhibited the smoothest surface (0.116±0.03μm) followed sequentially by and FZ (0.150±0.02μm) and CN (0.157±0.02μm). Thermocycling caused an increase in the Ra. The differences were statistically significant. All materials tested had Ra values below the threshold value of 0.2 μm at Mylar stage and after polishing with their recommended polishing system and Sof-Lex. Thermocycling produced rougher surfaces that did not exceed the threshold Ra value. Polishability was material dependent.
  4. Rahman MT, Hossain A, Pin CH, Yahya NA
    Biol Trace Elem Res, 2019 Jan;187(1):51-58.
    PMID: 29744817 DOI: 10.1007/s12011-018-1369-z
    Chronic oxidative stress and reactive oxygen species (ROS) in oral cavity as well as acidic pH on dental enamel surface due to the metabolic activities of bacterial plaque are the major contributors in the development and progression of dental caries. Along with other factors, deposition or dissolution Ca and Mg mostly determines the re- or demineralization of dental enamel. Zn plays an important role for both Ca and Mg bioavailability in oral cavity. Metallothionein (MT), a group of small molecular weight, cysteine-rich proteins (~ 7 kDa), is commonly induced by ROS, bacterial infection, and Zn. In the current review, we evaluated MT at the junction between the progression of dental caries and its etiologies that are common in MT biosynthesis.
  5. Eweis AH, Yap AU, Yahya NA
    J Mech Behav Biomed Mater, 2017 10;74:183-188.
    PMID: 28605721 DOI: 10.1016/j.jmbbm.2017.06.004
    This study investigated the effect of food simulating liquids on visco-elastic properties of bulk-fill restoratives using dynamic mechanical analysis. One conventional composite (Filtek Z350 [FZ]), two bulk-fill composites (Filtek Bulk-fill [FB] and Tetric N Ceram [TN]) and a bulk-fill giomer (Beautifil-Bulk Restorative [BB]) were evaluated. Specimens (12 × 2 × 2mm) were fabricated using customized stainless steel molds. The specimens were light-cured, removed from their molds, finished, measured and randomly divided into six groups. The groups (n = 10) were conditioned in the following mediums for 7 days at 37°C: air (control), artificial saliva (SAGF), distilled water, 0.02N citric acid, heptane, 50% ethanol-water solution. Specimens were assessed using dynamic mechanical testing in flexural three-point bending mode and their respective mediums at 37°C and a frequency range of 0.1-10Hz. The distance between the supports were fixed at 10mm and an axial load of 5N was employed. Data for elastic modulus, viscous modulus and loss tangent were subjected to ANOVA/Tukey's tests at significance level p < 0.05. Significant differences in visco-elastic properties were observed between materials and mediums. Apart from bulk-fill giomer, elastic modulus was the highest after conditioning in heptane. No apparent trends were noted for viscous modulus. Generally, loss tangent was the highest after conditioning in ethanol. The effect of food-simulating liquids on the visco-elastic properties of bulk-fill composites was material and medium dependent.
  6. Eweis AH, Yap AU, Yahya NA
    Saudi Dent J, 2018 Jul;30(3):232-239.
    PMID: 29942108 DOI: 10.1016/j.sdentj.2018.04.002
    OBJECTIVE: This study investigated the effect of dietary solvents on flexural strength and modulus of bulk-fill composites.

    MATERIALS AND METHODS: One conventional composite (Filtek Z350 [FZ]), two bulk-fill composites (Filtek Bulk-fill [FB] and Tetric N Ceram [TN]) and a bulk-fill giomer (Beautifil-Bulk Restorative [BB]) were evaluated. Specimens (12 × 2 × 2 mm) were fabricated using customized stainless steel molds. Specimens were light-cured, removed from their molds, finished, measured and randomly divided into six groups. The groups (n = 10) were conditioned in the following mediums for 7 days at 37 °C: air (control), artificial saliva (SAGF), distilled water, 0.02 N citric acid, heptane, 50% ethanol-water solution. After conditioning, the specimens were rinsed, blotted dry, measured and subjected to flexural testing using a universal testing machine. Representative SEM images of the intact surfaces were obtained to appraise the degradation mechanism by dietary solvents. Data was subjected to statistical analysis using ANOVA/Tukey's tests at significance level p 

  7. Wan Nur Aimi WMZ, Noorazliyana S, Tuan Salwani TI, Adlin Zafrulan Z, Najib Majdi Y, Noor Azlin Azraini CS
    Malays J Med Sci, 2021 Oct;28(5):64-71.
    PMID: 35115888 DOI: 10.21315/mjms2021.28.5.6
    Background: In end-stage renal disease (ESRD), troponin T concentrations can be elevated even without cardiac ischaemia, which hampers the diagnosis of acute myocardial infarction (AMI). The objectives of our study were to determine the proportion of dialysisdependent ESRD patients without acute coronary syndrome (ACS) but with highly sensitive cardiac troponin T (hs-cTnT) levels above the 99th percentile upper reference limit and to evaluate the range of hs-cTnT among this population.

    Methods: A cross-sectional study was conducted at the haemodialysis (HD) unit of a tertiary hospital in Malaysia from January 2018 to February 2019. Dialysis-dependent ESRD patients were included and those with a recent history of ACS (within 30 days) were excluded. Pre-dialysed serum hs-cTnT levels were measured using Cobas e411. The upper limit of the 99th percentile value for troponin T was 14 ng/L.

    Results: A total of 150 patients were recruited as study participants. The majority were female (62%) and of Malay ethnicity (94%), and the mean (SD) age was 45.19 (16.36) years old. The hs-cTnT range (min, max) was 11.39-738.30 ng/L and the median (interquartile range [IQR]) of hs-cTnT was 59.20 (83.41) ng/L. Elevated hs-cTnT levels were observed in 149/150 (99%) of the study participants (54/55 [98.2%] of the patients were on HD, and 95/95 [100.0%] of the patients were on continuous ambulatory peritoneal dialysis).

    Conclusion: This study supports prior research showing that even without ACS, most ESRD patients have elevated concentrations of cardiac troponin. Furthermore, our study illustrates the need to revisit the use of absolute troponin values when making a diagnosis of ACS in ESRD patients.

  8. Abdul Hayei NA, Yahya NA, Safii SH, Saub R, Vaithilingam RD, Baharuddin NA
    BMC Oral Health, 2021 03 31;21(1):169.
    PMID: 33789646 DOI: 10.1186/s12903-021-01540-0
    BACKGROUND: The influence of scaler tip design on root surface roughness, tooth substance loss and patients' pain perception is investigated.

    METHODS: This article was divided into the following parts: Part 1 Surface roughness and substance loss: an in vitro study, which involves intact extracted teeth sectioned and treated using a piezoelectric ultrasonic device (PM200 EMS Piezon, Switzerland) with a conventional scaler tip (FS-407) and a Perio Slim (PS) scaler tip (Perio Slim DS-016A). All sectioned samples for tooth surface roughness (n = 20) and tooth substance loss (n = 46) analyses were measured and compared using a 3D surface texture analyser and scanning electron microscope (SEM) respectively, at baseline and following scaling. Part 2 Pain Perception: a clinical study, which was a split mouth study design including 30 participants with gingivitis and/or mild chronic periodontitis; treated with supra-gingival scaling from teeth #13 to #23. Subjects were randomised to group A or group B. Group A was treated first with PS scaler tips, whereas group B was treated first with conventional scaler tips. Pain perception was recorded using the visual analogue scale (VAS).

    RESULTS: In vitro study: both scaler tips caused significant reduction in root substance roughness after scaling (p  0.05) was observed. The PS scaler tip caused statistically significantly less root substance loss (p 

  9. Aziz J, Shezali H, Radzi Z, Yahya NA, Abu Kassim NH, Czernuszka J, et al.
    Skin Pharmacol Physiol, 2016;29(4):190-203.
    PMID: 27434176 DOI: 10.1159/000447017
    Collagen and elastin networks make up the majority of the extracellular matrix in many organs, such as the skin. The mechanisms which are involved in the maintenance of homeostatic equilibrium of these networks are numerous, involving the regulation of genetic expression, growth factor secretion, signalling pathways, secondary messaging systems, and ion channel activity. However, many factors are capable of disrupting these pathways, which leads to an imbalance of homeostatic equilibrium. Ultimately, this leads to changes in the physical nature of skin, both functionally and cosmetically. Although various factors have been identified, including carcinogenesis, ultraviolet exposure, and mechanical stretching of skin, it was discovered that many of them affect similar components of regulatory pathways, such as fibroblasts, lysyl oxidase, and fibronectin. Additionally, it was discovered that the various regulatory pathways intersect with each other at various stages instead of working independently of each other. This review paper proposes a model which elucidates how these molecular pathways intersect with one another, and how various internal and external factors can disrupt these pathways, ultimately leading to a disruption in collagen and elastin networks.
  10. Aziz J, Ahmad MF, Rahman MT, Yahya NA, Czernuszka J, Radzi Z
    Int J Biol Macromol, 2018 Feb;107(Pt A):1030-1038.
    PMID: 28939521 DOI: 10.1016/j.ijbiomac.2017.09.066
    Successful use of tissue expanders depends on the quality of expanded tissue. This study evaluates the impact of anisotropic self-inflating tissue expander (SITE) on the biomechanics of skin. Two different SITE were implanted subcutaneously on sheep scalps; SITE that requires 30days for maximum expansion (Group A; n=5), and SITE that requires 21days for maximum expansion (Group B; n=5). Control animals (n=5) were maintained without SITE implantation. Young's Modulus, D-periodicity, overlap and gap region length, diameter, and height difference between overlap and gap regions on collagen fibrils were analyzed using atomic force microscopy. Histology showed no significant differences in dermal thickness between control and expanded skin of groups A and B. Furthermore, most parameters of expanded skin were similar to controls (p>0.05). However, the height difference between overlap and gap regions was significantly smaller in group B compared to both control and group A (p<0.01). Strong correlation was observed between Young's Modulus of overlap and gap regions of the control and group A, but not group B. Results suggest that a relatively slower SITE can be useful in reconstructive surgery to maintain the biomechanical properties of expanded skin.
  11. Tuygunov N, Zakaria MN, Yahya NA, Abdul Aziz A, Cahyanto A
    J Mech Behav Biomed Mater, 2023 Oct;146:106099.
    PMID: 37660446 DOI: 10.1016/j.jmbbm.2023.106099
    Bone regeneration is a rapidly growing field that seeks to develop new biomaterials to regenerate bone defects. Conventional bone graft materials have limitations, such as limited availability, complication, and rejection. Glass ionomer cement (GIC) is a biomaterial with the potential for bone regeneration due to its bone-contact biocompatibility, ease of use, and cost-effectiveness. GIC is a two-component material that adheres to the bone and releases ions that promote bone growth and mineralization. A systematic literature search was conducted using PubMed-MEDLINE, Scopus, and Web of Science databases and registered in the PROSPERO database to determine the evidence regarding the efficacy and bone-contact biocompatibility of GIC as bone cement. Out of 3715 initial results, thirteen studies were included in the qualitative synthesis. Two tools were employed in evaluating the Risk of Bias (RoB): the QUIN tool for assessing in vitro studies and SYRCLE for in vivo. The results indicate that GIC has demonstrated the ability to adhere to bone and promote bone growth. Establishing a chemical bond occurs at the interface between the GIC and the mineral phase of bone. This interaction allows the GIC to exhibit osteoconductive properties and promote the growth of bone tissue. GIC's bone-contact biocompatibility, ease of preparation, and cost-effectiveness make it a promising alternative to conventional bone grafts. However, further research is required to fully evaluate the potential application of GIC in bone regeneration. The findings hold implications for advancing material development in identifying the optimal composition and fabrication of GIC as a bone repair material.
  12. Tuygunov N, Khairunnisa Z, Yahya NA, Aziz AA, Zakaria MN, Israilova NA, et al.
    Dent Mater J, 2024 Jan 30;43(1):1-10.
    PMID: 38220163 DOI: 10.4012/dmj.2023-132
    This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement (GIC). Electronic databases, including PubMed-MEDLINE, Scopus, and Web of Science, were systematically searched according to PRISMA guidelines. This review was registered in the PROSPERO database. Five eligible studies on modifying GIC with calcium and phosphate ions were included. The risk of bias was assessed using the RoBDEMAT tool. The incorporation of these ions into GIC enhanced its bioactivity and remineralization properties. It promoted hydroxyapatite formation, which is crucial for remineralization, increased pH and inhibited cariogenic bacteria growth. This finding has implications for the development of more effective dental materials. This can contribute to improved oral health outcomes and the management of dental caries, addressing a prevalent and costly oral health issue. Nevertheless, comprehensive longitudinal investigations are needed to evaluate the clinical efficacy of this GIC's modification.
  13. Omar J, Isa S, Ismail TST, Yaacob NM, Soh NAAC
    Malays J Med Sci, 2019 Jul;26(4):61-69.
    PMID: 31496894 MyJurnal DOI: 10.21315/mjms2019.26.4.7
    Background: As an early recognition of neonatal sepsis is important for triggering the initiation of treatment, this study was thus designed to assess the diagnostic performance and discrimination value of procalcitonin (PCT) in neonatal sepsis cases.

    Methods: This cross-sectional study, which was carried out at the Paediatric Intensive Care Unit of Hospital Universiti Sains Malaysia (HUSM) in Kelantan, Malaysia, had involved 60 neonates admitted for suspected sepsis. Sensitivity, specificity, positive predictive values (PPV), negative predictive values (NPV) and the area under receiver operating characteristics curve (AUC) for PCT were determined at initial presentation (0 h) as well as 12 h and 24 h after presentation in comparison to blood culture as the gold standard.

    Results: The study consisted of 27 (45.0%) male and 33 (55.0%) female neonates with a mean (SD) age of 76.8 (48.25) h. At cut-off PCT value of > 2 ng/mL, the sensitivity, specificity, PPV and NPV were 66.7%, 66.7%, 33.3% and 88.9% at 0 h. The respective parameters were 83.3%. 56.3%, 32.3% and 93.1% at 12 h and 83.3%, 52.1%, 30.3% and 92.6% at 24 h. AUC was 71.6%, 76.6% and 71.7% at 0 h, 12 h and 24 h.

    Conclusions: Diagnostic performance and discrimination values of PCT for diagnosis of neonatal sepsis varied with time of obtaining the blood samples. The PCT result at 12 h demonstrates the most optimal diagnostic performance and discrimination values.

  14. Manssor NA, Radzi Z, Yahya NA, Mohamad Yusof L, Hariri F, Khairuddin NH, et al.
    Skin Pharmacol Physiol, 2016;29(2):55-62.
    PMID: 26836267 DOI: 10.1159/000431328
    Mechanical properties of expanded skin tissue are different from normal skin, which is dependent mainly on the structural and functional integrity of dermal collagen fibrils. In the present study, mechanical properties and surface topography of both expanded and nonexpanded skin collagen fibrils were evaluated. Anisotropic controlled rate self-inflating tissue expanders were placed beneath the skin of sheep's forelimbs. The tissue expanders gradually increased in height and reached equilibrium in 2 weeks. They were left in situ for another 2 weeks before explantation. Expanded and normal skin samples were surgically harvested from the sheep (n = 5). Young's modulus and surface topography of collagen fibrils were measured using an atomic force microscope. A surface topographic scan showed organized hierarchical structural levels: collagen molecules, fibrils and fibers. No significant difference was detected for the D-banding pattern: 63.5 ± 2.6 nm (normal skin) and 63.7 ± 2.7 nm (expanded skin). Fibrils from expanded tissues consisted of loosely packed collagen fibrils and the width of the fibrils was significantly narrower compared to those from normal skin: 153.9 ± 25.3 and 106.7 ± 28.5 nm, respectively. Young's modulus of the collagen fibrils in the expanded and normal skin was not statistically significant: 46.5 ± 19.4 and 35.2 ± 27.0 MPa, respectively. In conclusion, the anisotropic controlled rate self-inflating tissue expander produced a loosely packed collagen network and the fibrils exhibited similar D-banding characteristics as the control group in a sheep model. However, the fibrils from the expanded skin were significantly narrower. The stiffness of the fibrils from the expanded skin was higher but it was not statistically different.
  15. Che Soh NAA, Yaacob NM, Omar J, Mohammed Jelani A, Shafii N, Tuan Ismail TS, et al.
    PMID: 33171973 DOI: 10.3390/ijerph17218199
    Hyperprolactinemia (hPRL) often poses a diagnostic dilemma due to the presence of macroprolactin. Understanding the prevalence of macroprolactinemia (mPRL) has an important implication in managing patients with hPRL. The primary aim of this study was to determine the prevalence of mPRL globally and to explore selected factors influencing the prevalence estimate. Studies with original data related to the prevalence of mPRL among patients with hPRL from inception to March 2020 were identified, and a random effects meta-analysis was performed. Of the 3770 records identified, 67 eligible studies from 27 countries were included. The overall global prevalence estimate was 18.9% (95% CI: 15.8%, 22.1%) with a substantial statistical heterogeneity (I2 = 95.7%). The highest random effects pooled prevalence was observed in the African region (30.3%), followed by Region of the Americas (29.1%), European (17.5%), Eastern Mediterranean (13.9%), South-East Asian (12.7%), and Western Pacific Region (12.6%). Lower prevalence was observed in studies involving both sexes as compared to studies involving only female participants (17.1% vs. 25.4%) and in more recent studies (16.4%, 20.4%, and 26.5% in studies conducted after 2009, between 2000 and 2009, and before 2000, respectively). The prevalence estimate does not vary according to the age group of study participants, sample size, and types of polyethylene glycol (PEG) used for detection of macroprolactin (PEG 6000 or PEG 8000). With macroprolactin causing nearly one-fifth of hPRL cases, screening for mPRL should be made a routine before an investigation of other causes of hPRL.
  16. Krishnamurithy G, Mohan S, Yahya NA, Mansor A, Murali MR, Raghavendran HRB, et al.
    PLoS One, 2019;14(3):e0214212.
    PMID: 30917166 DOI: 10.1371/journal.pone.0214212
    It has been demonstrated that nanocrystalline forsterite powder synthesised using urea as a fuel in sol-gel combustion method had produced a pure forsterite (FU) and possessed superior bioactive characteristics such as bone apatite formation and antibacterial properties. In the present study, 3D-scaffold was fabricated using nanocrystalline forsterite powder in polymer sponge method. The FU scaffold was used in investigating the physicochemical, biomechanics, cell attachment, in vitro biocompatibility and osteogenic differentiation properties. For physicochemical characterisation, Fourier-transform infrared spectroscopy (FTIR), Energy dispersive X-ray (EDX), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoemission spectrometer (XPS) and Brunauer-Emmett-Teller (BET) were used. FTIR, EDX, XRD peaks and Raman spectroscopy demonstrated correlating to FU. The XPS confirmed the surface chemistry associating to FU. The BET revealed FU scaffold surface area of 12.67 m2/g and total pore size of 0.03 cm3/g. Compressive strength of the FU scaffold was found to be 27.18 ± 13.4 MPa. The human bone marrow derived mesenchymal stromal cells (hBMSCs) characterisation prior to perform seeding on FU scaffold verified the stromal cell phenotypic and lineage commitments. SEM, confocal images and presto blue viability assay suggested good cell attachment and proliferation of hBMSCs on FU scaffold and comparable to a commercial bone substitutes (cBS). Osteogenic proteins and gene expression from day 7 onward indicated FU scaffold had a significant osteogenic potential (p<0.05), when compared with day 1 as well as between FU and cBS. These findings suggest that FU scaffold has a greater potential for use in orthopaedic and/or orthodontic applications.
  17. Chen YZ, Yong MJ, Tan VY, Kong SLS, Elnawawy HMA, Yahya NA, et al.
    Eur Endod J, 2023 May;8(3):215-224.
    PMID: 37257037 DOI: 10.14744/eej.2023.36449
    OBJECTIVE: This study compared the effects of calcium chloride dihydrate (CaCl2.2H2O) on the physical properties and push-out bond strength of white Mineral Trioxide Aggregate (WMTA) and an experimental Malaysian Portland cement mixed with nano-zirconium oxide (nano-ZrO) [(radiopaque Malaysian Portland cement (RMPC). Mineral Trioxide Aggregate (MTA) was the first calcium silicate cement (CSC) introduced in dentistry, but up to date, it is an expensive cement with long setting time and causes tooth discolouration. Although Portland cement has been introduced as a potential substitute to MTA, it still faces some challenges such as long setting time and lack of sufficient radiopacity.

    METHODS: Four groups [WMTA, RMPC, fast-set WMTA (FS-WMTA) and fast-set RMPC (FS-RMPC)] were prepared. Initial setting time was evaluated using Vicat apparatus. The pH was measured at seven-day intervals. For discolouration potential, cements were packed in the pulp chamber of 46 extracted maxillary incisors. Spectrophotometric readings were obtained at seven-day intervals, and the rate of colour change (ΔE) was recorded. For the push-out bond strength testing, cements were applied in 48 sectioned root samples, and the test was performed using universal testing machine at crosshead speed of 0.5 mm/min until bond failure. Statistical analysis was done according to the nature of each group of data using SPSS 26.

    RESULTS: Addition of CaCl2.2H2O decreased the initial setting times of both RMPC and WMTA significantly (p<0.05). The pH values of FS-WMTA and FS-RMPC were comparable to their non-accelerated counterparts ranging from 10 to 12. Discolouration effect was more obviously observed with WMTA and FS-WMTA with time compared to RMPC formulations. Push-out bond strength of the two materials also showed an increase with the addition of the accelerator, however, only FS-WMTA showed statistically significant difference compared to WMTA (p<0.05).

    CONCLUSION: The addition of CaCl2.2H2O improves the physical and mechanical properties of the newly formulated RMPC and WMTA. The RMPC formulation overcomes the discolouration potential of WMTA. (EEJ-2022-12-155).

  18. Lin GSS, Ng YS, Hashim H, Foong CC, Yahya NA, Halil MHM, et al.
    BMC Oral Health, 2024 Jul 04;24(1):762.
    PMID: 38965533 DOI: 10.1186/s12903-024-04532-y
    BACKGROUND: Interprofessional education (IPE) is essential to foster collaboration among healthcare professionals for holistic patient care. However, Malaysian dental education remains discipline-centric, hindering multidisciplinary learning approaches. Hence, this study aimed to explore Malaysian undergraduate dental students' perceptions of IPE.

    METHODS: The present cross-sectional study employed convenience sampling to survey undergraduate dental students from four Malaysian institutions using a modified questionnaire with 20 close-ended and 2 open-ended questions. The questionnaire covered three domains (effectiveness, preference, importance) to assess students' perceptions using a five-point Likert scale. Psychometric validation was performed to assure validity and reliability of the modified questionnaire. Quantitative analysis (descriptive and inferential statistics), and qualitative analysis (content analysis) were subsequently performed.

    RESULTS: 397 students responded, and positive perceptions were generally noted with mean scores ranging from 4.13 to 4.35 across all domains. Questions 2 and 3, assessing the improvement in understanding the roles and responsibilities, and communication among healthcare professionals, received the highest mean scores. Meanwhile, Question 15 concerning the incorporation of IPE into educational goals received the lowest mean score. Regression analysis identified gender and clinical phase as significant factors, with females and preclinical students exhibiting more favourable perceptions. Motivators for IPE included a keen interest in diverse perspectives and recognising the importance of teamwork, while barriers encompassed tightly packed schedules, lack of understanding about IPE, misconceptions regarding dental education, and students' nervousness and fear of participation.

    CONCLUSION: This study produced a valid and reliable instrument to measure undergraduate dental students' perceptions towards IPE. Strategic planning, such as overcoming logistical challenges, improving awareness, and creating a supportive learning environment are crucial for successful IPE integration into existing curricula, especially in resource-constrained developing countries like Malaysia.

  19. Elnawawy HM, Kutty MG, Yahya NA, Kasim NHA, Cooper PR, Camilleri J, et al.
    Dent Mater J, 2024 Sep 10.
    PMID: 39261022 DOI: 10.4012/dmj.2024-015
    This study compared the chemical and physical properties of an experimental radiopaque white Portland cement (REPC) with reduced particle size to ProRoot white mineral trioxide aggregate (WMTA). The particle size distribution of experimental Portland cement (EPC) was examined, and then nano-zirconium oxide (nano-ZrO) was added to produce REPC. Chemical analysis, initial setting time, pH values, and push-out bond strength were evaluated. Results showed that REPC had smallest particle size (354.5±26.45 nm), while PC had the largest (1,309.67±60.54 nm) (p<0.05). Differences in chemical composition were observed. REPC exhibited shorter setting time (32.7±0.58 min) compared to WMTA (131.67±2.89 min) and PC (163.33±2.89 min) (p<0.05). All groups showed alkaline pH (p<0.05). REPC demonstrated the highest push-out bond strength (22.24±4.33 MPa) compared with WMTA (15.53±3.26 MPa) and PC (16.8±5.43 MPa) (p<0.05). This cost-effective PC formulation reduced the setting time and increased the push-out bond strength while maintaining the alkaline properties of the original cements.
  20. Majeed R, Elnawawy HM, Kutty MG, Yahya NA, Azami NH, Abu Kasim NH, et al.
    Odontology, 2023 Oct;111(4):759-776.
    PMID: 36864211 DOI: 10.1007/s10266-023-00786-0
    This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links