Displaying all 13 publications

Abstract:
Sort:
  1. Low YL, Pui LP
    Acta Sci Pol Technol Aliment, 2020 7 1;19(2):207-218.
    PMID: 32600017 DOI: 10.17306/J.AFS.0752
    BACKGROUND: The bite-sized jelly sphere with a gelatinous exterior and fruit puree interior is a type of innovative fruit-based dessert. This study aimed to produce jelly spheres with a gelatinous exterior and mangopineapple puree interior by using frozen reverse spherification.

    METHODS: A full factorial design (23) was applied to study the effects of mango-pineapple ratio (x1), immersion time in sugar solution (x2), and concentration of sugar solution (x3) in the production  of mango-pineapple jelly spheres using frozen reverse spherification. The responses studied were the physicochemical properties (color, total soluble solids, and texture) and sensory evaluation of mango-pineapple jelly spheres.

    RESULTS: Mango-pineapple ratio had a positive effect on a* and b* while having a negative effect L* value on the jelly sphere. Total soluble solids of jelly spheres were influenced by both immersion time in sugar solution and concentration of sugar solution. Immersion time in sugar solution had a positive effect on the peak force of the compression cycle and deformation at peak load while having a negative effect on the total soluble solid of jelly spheres. On the other hand, the concentration of sugar solution had a positive effect on the sensory evaluation in terms of flavor, texture, and overall acceptability. The desirability function approach was used to optimize the factors, and an overall desirability of 0.89 for all responses was achieved with 1.28:1 mango-pineapple ratio, 30 mins immersion time in sugar solution, and 22°Brix sugar solution. A proximate analysis of the optimized mango-pineapple jelly spheres had an energy content of 73.18 kcal/100 g and showed nutrient values of 81.11% moisture, 0.10% ash, 0.46% protein, 0% fat, 0.97% total dietary fiber, and 17.35% digestible carbohydrate.

    CONCLUSIONS: The development of the optimal mango-pineapple jelly sphere allows food producers to produce a dessert that is low in calories, with a good appearance and consumer acceptability.

  2. Pui LP, Mohammed AS, Ghazali HM
    Acta Sci Pol Technol Aliment, 2020 9 27;19(3):319-331.
    PMID: 32978914 DOI: 10.17306/J.AFS.0804
    BACKGROUND: 5'-Phosphodiesterase (5'-PDE) is an enzyme that hydrolyzes RNA to form 5'-inosine monophosphate (5'-IMP) and 5'-guanosine monophosphate (5'-GMP). These 5'-nucleotides can function as flavor enhancers. Adzuki beans (Vigna angularis L.) are found to be high in 5'-PDE.

    METHODS: 5'-phosphodiesterase (5'-PDE) enzyme was characterized from adzuki beans, in which the optimum pH and temperature were determined. In addition, the stability of 5'-PDE was assessed at different pH and temperature. The effects of cations and EDTA were evaluated to characterize the 5'-PDE enzymes further.

    RESULTS: The alkaline 5'-phosphodiesterase has an optimum pH of 8.5. This enzyme is also thermostable, with an optimum temperature of 80°C. The stability in terms of temperature and pH was also determined, and was found to be stable in the pH range of 7.0-8.5. This enzyme was found to retain more than 80% of its activity for 4 days at 60 and 65°C. In addition, the effects of 14 different metal ions, 4 types of detergents and ethylenediaminetetraacetic acid (EDTA) on 5'-PDE were studied. Ca2+, K+, Mg2+ and Li+ activated 5'-PDE while Na+, Zn2+, Ni+, Hg+, Cu2+, Pb2+, Fe2+, Al3+, Ba2+ and Co2+ were inhibitory. EDTA, Triton X-100 and sodium dodecyl sulfate (SDS) were strong inhibitors of 5'-PDE, while Tween 80 and Tween 20 were slightly inhibitory. The effects of cations and EDTA suggest that 5'-PDE from adzuki beans is a metalloenzyme.

    CONCLUSIONS: Although 5'-PDE from adzuki beans has a high temperature optimum of 80°C, the enzyme is more stable at 60°C, and different cations affected the activity of the enzyme differently.

  3. Yap KL, Kong I, Abdul Kalam Saleena L, Pui LP
    J Food Sci Technol, 2022 Nov;59(11):4341-4351.
    PMID: 36193470 DOI: 10.1007/s13197-022-05508-y
    Active packaging, such as edible film with antibacterial properties, can help extend the shelf life of food. The research aimed to develop a 3D printed gelatin edible film by using glycerol and Garcinia atroviridis extract (GAE). Mechanical properties of gelatin gel, physical, mechanical, and antimicrobial properties of edible film with glycerol and GAE were determined. Water solubility, total colour difference, and elongation of break of gelatin edible film increased as glycerol concentration increased (0-25% w/w), whereas tensile strength and Young's modulus value decreased from 26.5 to 4.64 MPa and 3.04 to 0.13 MPa, respectively. On the other hand, increasing GAE from 1 to 4% (w/w) increases elongation at break from 40.83 to 98.27%, while decreasing edible film tensile strength and gelatin gel hardness value from 8.94 to 6.21 MPa and 1848.67 to 999.67 g, respectively. Using 20% (w/w) glycerol and 4% (w/w) GAE, the best 3D printed film with low tensile strength (6.21 MPa), high elongation at break (98.27%), and antibacterial activity against S. aureus with 7.23 mm zone of inhibition was developed. It seems to have a great potentiality as an active packaging material for 3D printed gelatin edible film.
  4. Tan LF, Elaine E, Pui LP, Nyam KL, Yusof YA
    Acta Sci Pol Technol Aliment, 2021 1 16;20(1):55-66.
    PMID: 33449520 DOI: 10.17306/J.AFS.0771
    BACKGROUND: Biodegradable food packaging has improved in quality with recent research incorporating natural extracts for functionality purposes. This research aims to develop chitosan film with Chrysanthemum morifolium essential oil to improve the shelf life of fresh raw chicken and beef.

    METHODS: 1.5% (w/v) chitosan films with Chrysanthemum morifolium essential oil (0% to 6% (v/v)) were produced through homogenization, the casting of a film solution in a petri dish and convection drying. The edible film was evaluated in terms of its physical (color, thickness, water vapor permeability), mechanical (puncture strength, tensile strength, elongation at break) and chemical properties (antioxidant assay, Fourier Transform Infrared Spectroscopy (FTIR)).

    RESULTS: With an increasing concentration of Chrysanthemum morifolium in the chitosan film, the test values of physical properties such as tensile strength, puncture force, and elongation at break declined significantly. However, the thickness, water permeability, and color profile (L*, a*, b*) values of the chitosan film increased. Similarly, the scavenging effect of antioxidant assay increased (from 4.97% to 18.63%) with a rise in Chrysanthemum morifolium concentration. 2%, 3%, and 4% of Chrysanthemum morifolium in the chitosan film showed a significant inhibition zone ranging from 2.67 mm to 3.82 mm against Staphylococcus aureus, a spoilage bacterium that is commonly found in chicken and beef products. The storage and pH tests showed that 4% of Chrysanthemum morifolium in the film maintained pH level (safe to consume), and the shelf life was extended from 3 days to 5 days of meat storage.

    CONCLUSIONS: This study demonstrated that the incorporation of 4% (v/v) Chrysanthemum morifolium extract into 1.5% (w/v) chitosan film extends the storage duration of raw meat products noticeably by reducing Staphylococcus aureus activity. Therefore, it increases the quality of the edible film as an environmentally friendly food packaging material so that it can act as a substitute for the use of plastic bags. Future studies will be conducted on improving the tensile strength of the edible film to increase the feasibility of using it in the food industry. In addition, the microstructure and surface morphology of the edible film can be further determined.

  5. Pui LP, Karim R, Yusof YA, Wong CW, Ghazali HM
    Acta Sci Pol Technol Aliment, 2021 4 23;20(2):135-148.
    PMID: 33884852 DOI: 10.17306/J.AFS.0801
    BACKGROUND: 'Cempedak' (Artocarpus integer) is an aromatic fruit which is similar to jackfruit. Although it is rich in vitamin A and is consumed fresh, the fruit has a short shelf life. Hence, it can be converted through a spray-drying process, to form powder, which is more stable. Powder flow properties are important when considering storage, while its reconstitution characteristics are critical for the consumer to make juice from the product.

    METHODS: The parameters of spray-dried 'cempedak' fruit powder under study include inlet air temperature (140-180°C) and maltodextrin (DE 10) concentrations (5-15% w/w). Response surface methodology involving 14 runs was used to assess the effects of inlet temperature and maltodextrin on the powder flow properties and reconstitution properties of the spray-dried 'cempedak' powder.

    RESULTS: Out of the tested responses, only bulk density, change in cake height ratio, and water solubility index had a high coefficient of determination value. Inlet air temperature was found to be the main parameter to affect the bulk density, caking and water solubility index, when compared to maltodextrin concentration. By setting minimization of caking and maximization of water solubility index as the main determinants, the optimal parameters of 160°C inlet temperature and 15% (w/w) maltodextrin DE10 were generated, with a desirability of 0.697.

    CONCLUSIONS: The powder produced under optimal conditions (160°C and 15% w/w maltodextrin) had a low bulk density (480.01 kg/m3), low caking properties (0.17 change in cake height ratio), and a high solubility index (88.69). This indicates that the powder is stable to be stored (without caking) and will have good reconstitution when added to water.

  6. Chang LS, Lau KQ, Tan CP, Yusof YA, Nyam KL, Pui LP
    Acta Sci Pol Technol Aliment, 2021 11 2;20(4):417-421.
    PMID: 34724366 DOI: 10.17306/J.AFS.0903
    BACKGROUND: ‘Kedondong’ fruit is regarded as an exotic fruit that is gaining popularity due to its deliciousness and pleasant flavour. However, this fruit has a short shelf life, leading to problems with postharvest loss. In order to prevent losses, the fruit could be produced as a value-added product. In this study, the ‘kedondong’ fruit was preserved by drying into powder using different drying methods.

    METHODS: The kedondong powder was dried using five methods: convection oven drying, vacuum drying, spray drying, drum drying and freeze drying. The physical properties, flowability and DPPH radical scavenging ability of dried kedondong powder were examined.

    RESULTS: Spray-dried powder provided the significantly (p ≤ 0.05) highest process yield, which was 54.93%. All the powder produced had a low moisture content (3.03 to 5.66%) and water activity (0.19–0.37). Visually, whitish and fine powders were observed on spray-dried and freeze-dried samples, while convection oven-dried and vacuum-dried powder appeared yellowish and coarse. The pH of the reconstituted powders varied from 2.71 to 2.83, where drum-dried powder was the most acidic. Spray-dried powder showed the highest wettability and shortest dissolution time, which was 172.65 s and 10.55 s, respectively. With the exception of drum-dried powder, all the dried powders were classified as non-caking powders. The bulk and tapped density of the powders ranged from 0.32 to 0.70 g/mL and 0.38 to 0.86 g/mL, respectively. Vacuum-dried powder had very good flowability, convection oven-dried and drum-dried powder had good flowability, while spray-dried and drum-dried powder had fair flowability. Antioxidant assay showed that freeze-dried powder exhibited the highest free radical scavenging activity (IC50 = 701.29 μg/mL).

    CONCLUSIONS: This study indicates that spray-dried kedondong powder has great potential in the food industry due to its high process yield and better powder quality. Meanwhile, freeze drying best preserved the antioxidant properties of the powder, which could potentially be used as a functional ingredient as a result. This study is important for the fruit processing industry as it offers an alternative for the farmer to produce kedondong fruit powder because the fruit has a short shelf life. Converting the fruit into powder can diversify the resulting produce into different applications, such as fruit juice, beverages, jam and other food products.

  7. Wai SN, How YH, Saleena LAK, Degraeve P, Oulahal N, Pui LP
    Foods, 2022 Nov 10;11(22).
    PMID: 36429174 DOI: 10.3390/foods11223583
    Single-use synthetic plastics that are used as food packaging is one of the major contributors to environmental pollution. Hence, this study aimed to develop a biodegradable edible film incorporated with Limosilactobacillus fermentum. Investigation of the physical and mechanical properties of chitosan (CS), sodium caseinate (NaCas), and chitosan/sodium caseinate (CS/NaCas) composite films allowed us to determine that CS/NaCas composite films displayed higher opacity (7.40 A/mm), lower water solubility (27.6%), and higher Young's modulus (0.27 MPa) compared with pure CS and NaCas films. Therefore, Lb. fermentum bacteria were only incorporated in CS/NaCas composite films. Comparison of the physical and mechanical properties of CS/NaCas composite films incorporated with bacteria with those of control CS/NaCas composite films allowed us to observe that they were not affected by the addition of probiotics, except for the flexibility of films, which was improved. The Lb. fermentum incorporated composite films had a 0.11 mm thickness, 17.9% moisture content, 30.8% water solubility, 8.69 A/mm opacity, 25 MPa tensile strength, and 88.80% elongation at break. The viability of Lb. fermentum after drying the films and the antibacterial properties of films against Escherichia coli O157:H7 and Staphylococcus aureus ATCC 29213 were also evaluated after the addition of Lb. fermentum in the composite films. Dried Lb. fermentum composite films with 6.65 log10 CFU/g showed an inhibitory effect against E. coli and S. aureus (0.67 mm and 0.80 mm inhibition zone diameters, respectively). This shows that the Lb.-fermentum-incorporated CS/NaCas composite film is a potential bioactive packaging material for perishable food product preservation.
  8. Saleena LAK, Teo MYM, How YH, In LLA, Pui LP
    J Biosci Bioeng, 2023 Jan;135(1):1-9.
    PMID: 36428209 DOI: 10.1016/j.jbiosc.2022.10.010
    Fermented foods are gaining popularity due to health-promoting properties with high levels of nutrients, phytochemicals, bioactive compounds, and probiotic microorganisms. Due to its unique fermentation process, Lactococcus lactis plays a key role in the food business, notably in the manufacturing of dairy products. The superior biological activities of L. lactis in these functional foods include anti-inflammatory and immunomodulatory capabilities. L. lactis boosted growth performance, controlled amino acid profiles, intestinal immunology, and microbiota. Besides that, the administration of L. lactis increased the rate of infection clearance. Innate and acquired immune responses would be upregulated in both local and systemic compartments, resulting in these consequences. L. lactis is often employed in the food sector and is currently being exploited as a delivery vehicle for biological research. These bacteria are being eyed as potential candidates for biotechnological applications. With this in mind, we reviewed the immunomodulatory effects of different L. lactis strains.
  9. Lim TW, Lim RLH, Pui LP, Tan CP, Ho CW
    Heliyon, 2023 Oct;9(10):e21025.
    PMID: 37876430 DOI: 10.1016/j.heliyon.2023.e21025
    Nowadays, the demand for using healthy natural pigments (betacyanins) in the food industry is increasing. The present study aimed to overcome the circumstances that render the betacyanins instability in the red dragon fruit drink using mild approaches. These included optimised fermentation, incorporation of anionic polysaccharide mixture solution [xanthan gum (XG, 0.30-0.40 %, w/v) and carboxymethyl cellulose (CMC, 0.50-0.90 %, w/v)] and also addition of citric acid (CA, 0.05-0.20 %, w/v). The results of this study showed that the hydrocolloid mixture solution of XG and CMC significantly increased the samples' viscosity, pH and °Brix but reduced the aw, while betacyanins concentration had no significant change. The incorporation of CA at increasing concentration only reduced the samples' pH significantly without affecting the viscosity, aw and °Brix. Among all fermented samples, Formulation 3E (0.40 % XG + 0.50 % CMC + 0.20 % CA) had achieved the desired commercial reference viscosity while also successfully minimised betacyanins degradation from 60.18 % to 14.72 %, had the best pH stability and no significant change in viscosity, aw and °Brix values after 4-week storage at 25 °C. The fermented red dragon fruit drink with betacyanins stabilised by Formulation 3E can be produced and served as an independent functional drink product and as a stable, functional ingredient (natural colourant) for the food industry.
  10. Abdul Kalam Saleena L, Chang SK, Simarani K, Arunachalam KD, Thammakulkrajang R, How YH, et al.
    Crit Rev Microbiol, 2023 Aug 08.
    PMID: 37551693 DOI: 10.1080/1040841X.2023.2243617
    Recently, more consumers are interested in purchasing probiotic food and beverage products that may improve their immune health. The market for functional foods and beverages that include Bifidobacterium is expanding because of their potential uses in both food and therapeutic applications. However, maintaining Bifidobacterium's viability during food processing and storage remains a challenge. Microencapsulation technique has been explored to improve the viability of Bifidobacterium. Despite the technical, microbiological, and economic challenges, the market potential for immune-supporting functional foods and beverages is significant. Additionally, there is a shift toward postbiotics as a solution for product innovation, a promising postbiotic product that can be incorporated into various food and beverage formats is also introduced in this review. As consumers become more health-conscious, future developments in the functional food and beverage market discussed in this review could serve as a reference for researchers and industrialist.
  11. Lim TW, Choo KY, Lim RLH, Pui LP, Tan CP, Ho CW
    Heliyon, 2023 Nov;9(11):e21940.
    PMID: 38027851 DOI: 10.1016/j.heliyon.2023.e21940
    Red dragon fruit (RDF) is well-known for its high nutritional content, especially the red pigment betacyanins that possess high antioxidant activity. Natural fermentation is an ancient yet outstanding technique that relies on the autochthonous microbiota from fruits and vegetables surfaces to preserve and improve the nutritional values and quality of the food product. The present study was to evaluate and identify the indigenous microbial community (bacteria and fungi) that are involved in the natural fermentation of RDF. Results revealed a total of twenty bacterial pure cultures and nine fungal pure cultures were successfully isolated from fermented red dragon fruit drink (FRDFD). For the first time, the PCR amplification of 16S rRNA and ITS regions and sequence analysis suggested nine genera of bacteria and three genera of fungi (Aureobasidium pullulans, Clavispora opuntiae, and Talaromyces aurantiacus) present in the FRDFD. Four dominant (≥10 % isolates) bacteria species identified from FRDFD were Klebsiella pneumonia, Brevibacillus parabrevis, Bacillus tequilensis and Bacillus subtilis. The carbohydrate fermentation test showed that all the indigenous microbes identified were able to serve as useful starter culture by fermenting sucrose and glucose, thereby producing acid to lower the pH of FRDFD to around pH 4 for better betacyanins stability. The present study provides a more comprehensive understanding of the indigenous microbial community that serves as the starter culture in the fermentation of RDF. Besides, this study provides a useful guide for future research to be conducted on studying the rare bacterial strains (such as B. tequilensis) identified from the FRDFD for their potential bioactivities and applications in medical treatment and functional foods industries.
  12. Ng PY, Chye SM, Ng ChH, Koh RY, Tiong YL, Pui LP, et al.
    Asian Pac J Cancer Prev, 2017 04 01;18(4):917-926.
    PMID: 28545188
    Background: Clinacanthus nutans (C.nutans) is a plant consumed as a cancer treatment in tropical Asia. Despite
    the availability of numerous anecdotal reports, evaluation of active anticancer effects has remained elusive. Therefore
    we here examined antiproliferative, reactive oxygen species (ROS)-inducing and apoptosis mechanisms of whole plant
    extracts in different cancer cell lines. Methods: Antiproliferative actions of five solvent extracts (hexane, chloroform,
    ethyl acetate, methanol and water) of C.nutans were tested on non-small cell lung cancer (A549), nasopharygeal cancer
    (CNE1) and liver cancer (HepG2) cells using MTT assay. The most potent anticancer extract was then assessed by flow
    cytometry to study cell cycle changes . Intracellular levels of ROS were quantified by DCFH-DA assay. Involvement of
    the caspase pathway in induction of apoptosis was assessed using caspase assay kits. GC-MS analysis was performed
    to identify phytoconstituents in the extracts. Results: Hexane and chloroform extracts were antiproliferative against
    all three cell lines, while the ethyl acetate extract, at 300 μg/mL, was antiproliferative in the CNE1 but not A549 and
    HepG2 cases. Methanol and water extracts did not inhibit cancer cell proliferation. The most potent anticancer hexane
    extract was selected for further testing. It induced apoptosis in all three cell lines as shown by an increase in the
    percentage of cell in sub-G1 phase. Dose-dependent increase in ROS levels in all three cell lines indicated apoptosis to
    be possibly modulated by oxidative stress. At high concentrations (>100 μg/mL), hexane extracts upregulated caspases
    8, 9 and 3/7 across all three cell lines. GC-MS analysis of the hexane extract revealed abundance of 31 compounds.
    Conclusion : Among the five extracts of C.nutans, that with hexane extract demonstrated the highest antiproliferative
    activity against all three cancer cell lines tested. Action appeared to be via ion of intracellular ROS, and induction of
    apoptosis via intrinsic and extrinsic caspase pathways.
  13. Tirta GD, Martin L, Bani MD, Kho K, Pramanda IT, Pui LP, et al.
    Foods, 2022 Dec 28;12(1).
    PMID: 36613381 DOI: 10.3390/foods12010165
    Pediococcus acidilactici has gained research and commercial interest due to its outstanding probiotic properties, yet its survival during storage and consumption requires improvement. This study aims to enhance P. acidilactici survival using spray drying encapsulation. Different inlet air temperatures (120 °C, 150 °C, and 170 °C) and whey protein isolate (WPI):gum arabic (GA) ratios (1:1, 3:1, 1:3) were tested. Cell viability was significantly (p < 0.05) affected by the inlet temperature but not the WPI:GA ratio. Increasing the inlet temperature to 170 °C significantly decreased P. acidilactici viability by 1.36 log cycles, from 8.61 log CFU/g to 7.25 log CFU/g. The inlet temperature of 150 °C resulted in a powder yield (63.12%) higher than at 120 °C (58.97%), as well as significantly (p < 0.05) lower moisture content (5.71%) and water activity (aw 0.21). Viable cell counts in all encapsulated P. acidilactici were maintained at 5.24−6.75 log CFU/g after gastrointestinal tract (GIT) simulation, with WPI:GA of 3:1 and inlet temperature 150 °C having the smallest log reduction (0.3 log cycles). All samples containing different WPI:GA ratios maintained sufficient viability (>7 log CFU/g) during the first three weeks of storage at 25 °C. These results could provide insights for further developing P. acidilactici as commercial probiotic products.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links