MyMedR

Displaying all 8 publications

Abstract:

Sort:

Fulltext 3,4-Dichlorophenoxyacetate interleaved into anionic clay for controlled release formulation of a new environmentally friendly agrochemical

Sheikh Mohd Ghazali SA, Hussein MZ, Sarijo SH

Nanoscale Res Lett, 2013;8(1):362.
PMID: 23968197 DOI: 10.1186/1556-276X-8-362

A new layered organic-inorganic nanohybrid material, zinc-aluminum-3,4-dicholorophenoxyacetate (N3,4-D) in which an agrochemical, 3,4-dichlorophenoxyacetic acid (3,4-D), is intercalated into zinc-aluminum-layered double hydroxide (ZAL), was synthesized by coprecipitation method. A well-ordered nanomaterial was formed with a percentage loading of 53.5% (w/w). Due to the inclusion of 3,4-D, basal spacing expanded from 8.9 Å in ZAL to 18.7 Å in N3,4-D. The Fourier transform infrared study shows that the absorption bands of the resulting nanohybrid composed of both the 3,4-D and ZAL further confirmed the intercalation episode. Thermal analysis shows that ZAL host enhances the thermal stability of 3,4-D. Controlled-release experiment shows that the release of 3,4-D in the aqueous media is in the order of phosphate > carbonate > sulfate > chloride. These studies demonstrate the successful intercalation of the 3,4-D and its controlled release property in various aqueous media.
Fulltext Herbicide-intercalated zinc layered hydroxide nanohybrid for a dual-guest controlled release formulation

Hussein MZ, Rahman NS, Sarijo SH, Zainal Z

Int J Mol Sci, 2012;13(6):7328-42.
PMID: 22837696 DOI: 10.3390/ijms13067328

Herbicides, namely 4-(2,4-dichlorophenoxy) butyrate (DPBA) and 2-(3-chlorophenoxy) propionate (CPPA), were intercalated simultaneously into the interlayers of zinc layered hydroxide (ZLH) by direct reaction of zinc oxide with both anions under aqueous environment to form a new nanohybrid containing both herbicides labeled as ZCDX. Successful intercalation of both anions simultaneously into the interlayer gallery space of ZLH was studied by PXRD, with basal spacing of 28.7 Å and supported by FTIR, TGA/DTG and UV-visible studies. Simultaneous release of both CPPA and DPBA anions into the release media was found to be governed by a pseudo second-order equation. The loading and percentage release of the DPBA is higher than the CPPA anion, which indicates that the DPBA anion was preferentially intercalated into and released from the ZLH interlayer galleries. This work shows that layered single metal hydroxide, particularly ZLH, is a suitable host for the controlled release formulation of two herbicides simultaneously.
Effect of incoming and outgoing exchangeable anions on the release kinetics of phenoxyherbicides nanohybrids

Sarijo SH, Hussein MZ, Yahaya AH, Zainal Z

J Hazard Mater, 2010 Oct 15;182(1-3):563-9.
PMID: 20633986 DOI: 10.1016/j.jhazmat.2010.06.070

The release of chlorophenoxyherbicides agrochemicals, namely 2-chloro- (2CPA), 4-chloro and 2,4,5-trichloro (TCPA) phenoxyacetates from their nanohybrids into various aqueous solutions; carbonate, sulfate and chloride was found to be controlled by pseudo-second order rate expression. The percentage saturated released was found to be anionic-dependent, in the order of carbonate>sulfate>chloride for the release media and 2CPA>4CPA>TCPA for the anionic guests. This study demonstrates that the release of the phenoxyherbicides agrochemicals from the nanohybrid compounds can be tuned by choosing the right combination of exchangeable anions both the incoming and the outgoing anions.
Synthesis of 4-chlorophenoxyacetate-zinc-aluminium-layered double hydroxide nanocomposite: physico-chemical and controlled release properties

Hussein MZ, Sarijo SH, Yahaya AH, Zainal Z

J Nanosci Nanotechnol, 2007 Aug;7(8):2852-62.
PMID: 17685307

Layered organic-inorganic hybrid nanocomposite material was synthesised using 4-chlorophenoxyacetate (4CPA) as guest anion intercalated into the Zn-Al layered double hydroxide inorganic host by direct co-precipitation method at pH = 7.5 and Zn to Al molar ratio of 4. Both PXRD and FTIR results confirmed that the 4CPA was successfully intercalated into the Zn-AI-LDH interlayer. As a result, a well-ordered nanolayered organic-inorganic hybrid nanocomposite, with the expansion of the basal spacing from 8.9 angstroms in the layered double hydroxide to 20.1 angstroms in the resulting nanocomposite was observed. The FTIR spectrum of the nanocomposite (ZAC) showed that it composed spectral features of Zn-AI-LDH (ZAL) and 4CPA. The nanocomposites synthesized in this work are of mesoporous-type containing 39.8% (w/w) of 4CPA with mole fraction of Al3+ in the inorganic brucite-like layers (xAI) of 0.224. The release studies showed a rapid release of the 4CPA for the first 600 min, and more sustained thereafter. The total amount of 4CPA released from the nanocomposite interlayer into the aqueous solution were 21%, 66%, and 72% in 0.0001, 0.00025, and 0.0005 M sodium carbonate, respectively. In distilled water, about 75, 35, and 57% of 4CPA could be released in 1000 min, when the pH of the release media was set at 3, 6.25, and 12, respectively. In comparison with a structurally similar organic moiety with one more chlorine atom at the 2-position of the aromatic ring, namely 2,4-dichlorophenoxyacetate (24D), the 4CPA showed a slower release rate. The slightly bulkier organic moiety of 24D together with the presence of chlorine atom at the 2-position presumably had contributed to its higher release rate, and it seems that these factors may be exploited for tuning the release rate of intercalated guest anions with similar properties. This study suggests that layered double hydroxide can be used as a carrier for an active agent and the chemical structure of the intercalated moiety can be used to tune the desired release kinetics of the beneficial agent.
Fulltext Effects of xanthan gum and HPMC on physicochemical and microstructure properties of sponge cakes during storage

Noorlaila A, Hasanah HN, Yusoff A, Sarijo SH, Asmeda R

J Food Sci Technol, 2017 Oct;54(11):3532-3542.
PMID: 29051648 DOI: 10.1007/s13197-017-2810-6

The effects of xanthan gum (XG) and hydroxypropyl methylcellulose (HPMC) in sponge cakes were studied. Hydrocolloids enhanced the thickening effect in batter that affected the textural attributes of sponge cakes. During storage, the structural changes in XG-cake resulted in higher hardness compared to HPMC-cake. Similar to XG, HPMC also contributed moistness to cake. The moisture loss of cake containing XG was slower than HPMC-cake. FTIR study showed absorption of OH at region of 3600-2900 cm-1 that explained the strong interaction of water in cake containing XG compared to other cake formulations.
Fulltext Synthesis of (cinnamate-zinc layered hydroxide) intercalation compound for sunscreen application

Mohsin SM, Hussein MZ, Sarijo SH, Fakurazi S, Arulselvan P, Hin TY

Chem Cent J, 2013 Feb 06;7(1):26.
PMID: 23383738 DOI: 10.1186/1752-153X-7-26

BACKGROUND: Zinc layered hydroxide (ZLH) intercalated with cinnamate, an anionic form of cinnamic acid (CA), an efficient UVA and UVB absorber, have been synthesized by direct method using zinc oxide (ZnO) and cinnamic acid as the precursor.
RESULTS: The resulting obtained intercalation compound, ZCA, showed a basal spacing of 23.9 Å as a result of cinnamate intercalated in a bilayer arrangement between the interlayer spaces of ZLH with estimated percentage loading of cinnamate of about 40.4 % w/w. The UV-vis absorption spectrum of the intercalation compound showed excellent UVA and UVB absorption ability. Retention of cinnamate in ZLH interlayers was tested against media usually came across with sunscreen usage to show low release over an extended period of time. MTT assay of the intercalation compound on human dermal fibroblast (HDF) cells showed cytotoxicity of ZCA to be concentration dependent and is overall less toxic than its precursor, ZnO.
CONCLUSIONS: (Cinnamate-zinc layered hydroxide) intercalation compound is suitable to be used as a safe and effective sunscreen with long UV protection effect.
Evaluation of Controlled-Release Property and Phytotoxicity Effect of Insect Pheromone Zinc-Layered Hydroxide Nanohybrid Intercalated with Hexenoic Acid

Ahmad R, Hussein MZ, Kadir WR, Sarijo SH, Hin TY

J Agric Food Chem, 2015 Dec 30;63(51):10893-902.
PMID: 26501358 DOI: 10.1021/acs.jafc.5b03102

A controlled release formulation for the insect pheromone hexenoic acid (HE) was successfully developed using zinc-layered hydroxide (ZLH) as host material through a simple coprecipitation technique, resulting in the formation of inorganic-organic nanolayered material with sustained release properties. The release of HE from its nanohybrid was found to occur in a controlled manner, governed by a pseudo-second order kinetics model. The maximum amount of HE released from the nanocomposite into solutions at pH 4, 6.5, and 8 was found to be 84, 73, and 83% for 1100 min, respectively. The hexenoate zinc-layered hydroxide nanomaterial (HEN) was found to be nontoxic for plants when green beans and wheat seeds were successfully germinated in all HEN concentrations tested in the experiment, with higher percentage of seed germination and higher radical seed growth as compared to its counter anion, HE. ZLH can be a promising carrier for insect pheromone toward a new generation of environmentally safe pesticide nanomaterial for crop protection.
Fulltext Nanolayered composite with enhanced ultraviolet ray absorption properties from simultaneous intercalation of sunscreen molecules

Megat Nabil Mohsin S, Hussein MZ, Sarijo SH, Fakurazi S, Arulselvan P, Taufiq-Yap YH

Int J Nanomedicine, 2018;13:6359-6374.
PMID: 30349255 DOI: 10.2147/IJN.S171390

Introduction: The potential of layered double hydroxide (LDH) as a host of multiple ultraviolet-ray absorbers was investigated by simultaneous intercalation of benzophenone 4 (B4) and Eusolex® 232 (EUS) in Zn/Al LDH.
Methods: The nanocomposites were prepared via coprecipitation method at various molar ratios of B4 and EUS.
Results: At equal molar ratios, the obtained nanocomposite showed an intercalation selectivity that is preferential to EUS. However, the selectivity ratio of intercalated anions was shown to be capable of being altered by adjusting the molar ratio of intended guests during synthesis. Dual-guest nanocomposite synthesized with B4:EUS molar ratio 3:1 (ZEB [3:1]) showed an intercalation selectivity ratio of B4:EUS =53:47. Properties of ZEB (3:1) were monitored using powder X-ray diffractometer to show a basal spacing of 21.8 Å. Direct-injection mass spectra, Fourier transform infrared spectra, and ultraviolet-visible spectra confirmed the dual intercalation of both anions into the interlayer regions of dual-guest nanocomposite. The cytotoxicity study of dual-guest nanocomposite ZEB (3:1) on human dermal fibroblast cells showed no significant toxicity until 25 μg/mL.
Conclusion: Overall, the findings demonstrate successful customization of ultraviolet-ray absorbers composition in LDH host.