Displaying all 9 publications

Abstract:
Sort:
  1. Jayawardhana Y, Keerthanan S, Lam SS, Vithanage M
    Environ Res, 2021 06;197:111102.
    PMID: 33798520 DOI: 10.1016/j.envres.2021.111102
    The present study investigated adsorptive removal of toluene and ethylbenzene from the aqueous media via using biochar derived from municipal solid waste (termed "MSW-BC") in a single and binary contaminant system at 25-45 °C. The adsorption was evaluated at different pH (3-10), experimental time (up to 24 h), and initial adsorbate concentrations (10-600 μg/L) in single and binary contaminant system. A fixed-bed column experiment was also conducted using MSW-BC (0.25%) and influent concentration of toluene and ethylbenzene (4 mg/L) at 2 mL/min of flow rate. The adsorption of toluene and ethylbenzene on the MSW-BC was mildly dependent on the pH, and the peak adsorption ability (44-47 μg/g) was recorded at a baseline pH of ~8 in mono and dual contaminant system. Langmuir and Hill are the models that match the isotherm results in a single contaminant environment for both toluene (R2 of 0.97 and 0.99, respectively) and ethylbenzene (R2 of 0.99 and 0.99, respectively) adsorption. In the binary system, the isotherm models matched in the order of Langmuir > Hill > Freundlich for toluene, whereas Hill > Freundlich > Langmuir for ethylbenzene. The adsorption in the batch experiment was likely to take place via cooperative and multilayer adsorption onto MSW-BC involving hydrophobic, π- π and n- π attractions, specific interaction such as hydrogen-π and cation-π interactions, and van der Waals interactions. The thermodynamic results indicate exothermic adsorption occurred by physical attractions between toluene and ethylbenzene, and MSW-BC. The breakthrough behavior of toluene and ethylbenzene was successfully described with Yoon-Nelson and Thomas models. The data demonstrate that the low-cost adsorbent derived from the municipal solid waste can be utilized to remove toluene and ethylbenzene in landfill leachate.
  2. Zahmatkesh S, Klemeš JJ, Bokhari A, Wang C, Sillanpaa M, Amesho KTT, et al.
    Int J Environ Sci Technol (Tehran), 2023;20(2):2229-2246.
    PMID: 36438928 DOI: 10.1007/s13762-022-04654-2
    Microplastics (MPs) and SARS-CoV-2 interact due to their widespread presence in our environment and affect the virus' behaviour indoors and outdoors. Therefore, it is necessary to study the interaction between MPs and SARS-CoV-2. The environmental damage caused by MPs is increasing globally. Emerging pollutants may adversely affect organisms, especially sewage, posing a threat to human health, animal health, and the ecological system. A significant concern with MPs in the air is that they are a vital component of MPs in the other environmental compartments, such as water and soil, which may affect human health through ingesting or inhaling. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membrane bioreactors, advanced oxidation processes, adsorption, etc., are highly effective in removing MPs; they can still serve as an entrance route due to their constantly being discharged into aquatic environments. Following that, an analysis of each process for MPs' removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, an airborne microplastic has been reported in urban areas, raising health concerns since aerosols are considered a possible route of SARS-CoV-2 disease transmission and bind to airborne MP surfaces. The MPs can be removed from wastewater through conventional treatment processes with physical processes such as screening, grit chambers, and pre-sedimentation.
  3. Wijekoon P, Koliyabandara PA, Cooray AT, Lam SS, Athapattu BCL, Vithanage M
    J Hazard Mater, 2021 Jul 12;421:126627.
    PMID: 34343881 DOI: 10.1016/j.jhazmat.2021.126627
    The escalating loads of municipal solid waste (MSW) end up in open dumps and landfills, producing continuous flows of landfill leachate. The risk of incorporating highly toxic landfill leachate into environment is important to be evaluated and measured in order to facilitate decision making for landfill leachate management and treatment. Leachate pollution index (LPI) provides quantitative measures of the potential environmental pollution by landfill leachate and information about the environmental quality adjacent to a particular landfill. According to LPI values, most developing countries show high pollution potentials from leachate, mainly due to high organic waste composition and low level of waste management techniques. A special focus on leachate characterization studies with LPI and its integration to treatment, which has not been focused in previous reviews on landfill leachate, is given here. Further, the current review provides a summary related to leachate generation, composition, characterization, risk assessment and treatment together with challenges and perspectives in the sector with its focus to developing nations. Potential commercial and industrial applications of landfill leachate is discussed in the study to provide insights into its sustainable management which is original for the study.
  4. Mukhopadhyay R, Bhaduri D, Sarkar B, Rusmin R, Hou D, Khanam R, et al.
    J Hazard Mater, 2020 02 05;383:121125.
    PMID: 31541959 DOI: 10.1016/j.jhazmat.2019.121125
    Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of individual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.
  5. Mohanty SS, Vyas S, Koul Y, Prajapati P, Varjani S, Chang JS, et al.
    Sci Total Environ, 2023 Feb 20;860:160377.
    PMID: 36414054 DOI: 10.1016/j.scitotenv.2022.160377
    Landfilling is the most widely used disposal method for municipal solid waste around the world. The main disadvantage of this strategy is formation of leachate, among other aspects. Landfill leachate contains highly toxic and bio-refractory substances that are detrimental to the environment and human health. Hence, the risk(s) of discharging potentially harmful landfill leachate into the environment need to be assessed and measured in order to make effective choices about landfill leachate management and treatment. In view of this, the present review aims to investigate (a) how landfill leachate is perceived as an emerging concern, and (b) the stakeholders' mid- to long-term policy priorities for implementing technological and integrative solutions to reduce the harmful effects of landfill leachate. Because traditional methods alone have been reported ineffective, and in response to emerging contaminants and stringent regulations, new effective and integrated leachate treatments have been developed. This study gives a forward-thinking of the accomplishments and challenges in landfill leachate treatment during the last decade. It also provides a comprehensive compilation of the formation and characterization of landfill leachate, the geo-environmental challenges that it raises, as well as the resource recovery and industrial linkage associated with it in order to provide an insight into its sustainable management.
  6. Satya ADM, Cheah WY, Yazdi SK, Cheng YS, Khoo KS, Vo DN, et al.
    Environ Res, 2023 Feb 01;218:114948.
    PMID: 36455634 DOI: 10.1016/j.envres.2022.114948
    Water usage increased alongside its competitiveness due to its finite amount. Yet, many industries still rely on this finite resource thus recalling the need to recirculate their water for production. Circular bioeconomy is presently the new approach emphasizing on the 'end-of-life' concept with reusing, recycling, and recovering materials. Microalgae are the ideal source contributing to circular bioeconomy as it exhibits fast growth and adaptability supported by biological rigidity which in turn consumes nutrients, making it an ideal and capable bioremediating agent, therefore allowing water re-use as well as its biomass potential in biorefineries. Nevertheless, there are challenges that still need to be addressed with consideration of recent advances in cultivating microalgae in wastewater. This review aimed to investigate the potential of microalgae biomass cultivated in wastewater. More importantly, how it'll play a role in the circular bioeconomy. This includes an in-depth look at the production of goods coming from wastes tattered by emerging pollutants. These emerging pollutants include microplastics, antibiotics, ever-increasingly sewage water, and heavy metals which have not been comprehensively compared and explored. Therefore, this review is aiming to bring new insights to researchers and industrial stakeholders with interest in green alternatives to eventually contribute towards environmental sustainability.
  7. Weralupitiya C, Wanigatunge R, Joseph S, Athapattu BCL, Lee TH, Kumar Biswas J, et al.
    Bioresour Technol, 2021 Aug;334:125240.
    PMID: 33964811 DOI: 10.1016/j.biortech.2021.125240
    The discovery of anammox process has provided eco-friendly and low-cost means of treating ammonia rich wastewater with remarkable efficiency. Furthermore, recent studies have shown that the possibility of operating the anammox process under low temperatures and high organic matter contents broadening the application of the anammox process. However, short doubling time and extensive levels of sensitivity towards nutrients and environmental alterations such as salinity and temperature are the limitations in practical applications of the anammox process. This review article provides the recent yet comprehensive viewpoint on anammox bacteria and the key perspectives in applying them as an efficient strategy for wastewater treatment.
  8. Hoang SA, Sarkar B, Seshadri B, Lamb D, Wijesekara H, Vithanage M, et al.
    J Hazard Mater, 2021 08 15;416:125702.
    PMID: 33866291 DOI: 10.1016/j.jhazmat.2021.125702
    The term "Total petroleum hydrocarbons" (TPH) is used to describe a complex mixture of petroleum-based hydrocarbons primarily derived from crude oil. Those compounds are considered as persistent organic pollutants in the terrestrial environment. A wide array of organic amendments is increasingly used for the remediation of TPH-contaminated soils. Organic amendments not only supply a source of carbon and nutrients but also add exogenous beneficial microorganisms to enhance the TPH degradation rate, thereby improving the soil health. Two fundamental approaches can be contemplated within the context of remediation of TPH-contaminated soils using organic amendments: (i) enhanced TPH sorption to the exogenous organic matter (immobilization) as it reduces the bioavailability of the contaminants, and (ii) increasing the solubility of the contaminants by supplying desorbing agents (mobilization) for enhancing the subsequent biodegradation. Net immobilization and mobilization of TPH have both been observed following the application of organic amendments to contaminated soils. This review examines the mechanisms for the enhanced remediation of TPH-contaminated soils by organic amendments and discusses the influencing factors in relation to sequestration, bioavailability, and subsequent biodegradation of TPH in soils. The uncertainty of mechanisms for various organic amendments in TPH remediation processes remains a critical area of future research.
  9. Kumar V, Sharma N, Duhan L, Pasrija R, Thomas J, Umesh M, et al.
    Environ Toxicol Pharmacol, 2023 Mar;98:104045.
    PMID: 36572198 DOI: 10.1016/j.etap.2022.104045
    Microplastics are the small fragments of the plastic molecules which find their applications in various routine products such as beauty products. Later, it was realized that it has several toxic effects on marine and terrestrial organisms. This review is an approach in understanding the microplastics, their origin, dispersal in the aquatic system, their biodegradation and factors affecting biodegradation. In addition, the paper discusses the major engineering approaches applied in microbial biotechnology. Specifically, it reviews microbial genetic engineering, such as PET-ase engineering, MHET-ase engineering, and immobilization approaches. Moreover, the major challenges associated with the plastic removal are presented by evaluating the recent reports available.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links