MyMedR

Displaying all 10 publications

Abstract:

Sort:

Fulltext Differences in Motion Accuracy of Baduanjin between Novice and Senior Students on Inertial Sensor Measurement Systems

Li H, Khoo S, Yap HJ

Sensors (Basel), 2020 Nov 02;20(21).
PMID: 33147851 DOI: 10.3390/s20216258

This study aimed to evaluate the motion accuracy of novice and senior students in Baduanjin (a traditional Chinese sport) using an inertial sensor measurement system (IMU). Study participants were nine novice students, 11 senior students, and a teacher. The motion data of all participants were measured three times with the IMU. Using the motions of the teacher as the standard motions, we used dynamic time warping to calculate the distances between the motion data of the students and the teacher to evaluate the motion accuracy of the students. The distances between the motion data of the novice students and the teacher were higher than that between senior students and the teacher (p < 0.05 or p < 0.01). These initial results showed that the IMU and the corresponding mathematical methods could effectively distinguish the differences in motion accuracy between novice and senior students of Baduanjin.
Fulltext Virtual reality based support system for layout planning and programming of an industrial robotic work cell

Yap HJ, Taha Z, Dawal SZ, Chang SW

PLoS One, 2014;9(10):e109692.
PMID: 25360663 DOI: 10.1371/journal.pone.0109692

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell.
Fulltext Integrative machine learning analysis of multiple gene expression profiles in cervical cancer

Tan MS, Chang SW, Cheah PL, Yap HJ

PeerJ, 2018;6:e5285.
PMID: 30065881 DOI: 10.7717/peerj.5285

Although most of the cervical cancer cases are reported to be closely related to the Human Papillomavirus (HPV) infection, there is a need to study genes that stand up differentially in the final actualization of cervical cancers following HPV infection. In this study, we proposed an integrative machine learning approach to analyse multiple gene expression profiles in cervical cancer in order to identify a set of genetic markers that are associated with and may eventually aid in the diagnosis or prognosis of cervical cancers. The proposed integrative analysis is composed of three steps: namely, (i) gene expression analysis of individual dataset; (ii) meta-analysis of multiple datasets; and (iii) feature selection and machine learning analysis. As a result, 21 gene expressions were identified through the integrative machine learning analysis which including seven supervised and one unsupervised methods. A functional analysis with GSEA (Gene Set Enrichment Analysis) was performed on the selected 21-gene expression set and showed significant enrichment in a nine-potential gene expression signature, namely PEG3, SPON1, BTD and RPLP2 (upregulated genes) and PRDX3, COPB2, LSM3, SLC5A3 and AS1B (downregulated genes).
Fulltext Exoskeleton robot control for synchronous walking assistance in repetitive manual handling works based on dual unscented Kalman filter

Sado F, Yap HJ, Ghazilla RAR, Ahmad N

PLoS One, 2018;13(7):e0200193.
PMID: 30001415 DOI: 10.1371/journal.pone.0200193

Prolong walking is a notable risk factor for work-related lower-limb disorders (WRLLD) in industries such as agriculture, construction, service profession, healthcare and retail works. It is one of the common causes of lower limb fatigue or muscular exhaustion leading to poor balance and fall. Exoskeleton technology is seen as a modern strategy to assist worker's in these professions to minimize or eliminate the risk of WRLLDs. Exoskeleton has potentials to benefit workers in prolong walking (amongst others) by augmenting their strength, increasing their endurance, and minimizing high muscular activation, resulting in overall work efficiency and productivity. Controlling exoskeleton to achieve this purpose for able-bodied personnel without impeding their natural movement is, however, challenging. In this study, we propose a control strategy that integrates a Dual Unscented Kalman Filter (DUKF) for trajectory generation/prediction of the spatio-temporal features of human walking (i.e. joint position, and velocity, and acceleration) and an impedance cum supervisory controller to enable the exoskeleton to follow this trajectory to synchronize with the human walking. Experiment is conducted with four subjects carrying a load and walking at their normal speed- a typical scenario in industries. EMG signals taken at two muscles: Right Vastus Intermedius (on the thigh) and Right Gastrocnemius (on the calf) indicated reduction in muscular activation during the experiment. The results also show the ability of the control system to predict spatio-temporal features of the pilots' walking and to enable the exoskeleton to move in concert with the pilot.
Fulltext Industrial practitioner's perception on the application of exoskeleton system in automotive assembly industries: A Malaysian case study

Gan WY, Raja Ghazilla RA, Yap HJ, Selvarajoo S

Heliyon, 2024 Feb 29;10(4):e26183.
PMID: 38404870 DOI: 10.1016/j.heliyon.2024.e26183

The automotive industry is a key manufacturing industry for the Malaysian economy, where manual jobs and task are still common. Hence, Work-related Musculoskeletal Disorders (WMSD) is a common type of injury among workers. Exoskeleton system has gained global traction as a possible solution to reduce the risk of MSD among workers. Nonetheless, the application of exoskeleton in the automotive industry in Malaysia remains unknown. As such, this study attempts to provide insight into the industry's perception on the potential of exoskeleton application within the context of Malaysian automotive assembly sector. Therefore, a total of 52 management level respondents from various manufacturers participated in this study. It is found that, although the technology seems to be relatively new and disruptive, the respondents have a positive perception towards it with an acceptance rate of 86.5%. Cost of implementation exoskeleton technologies seems to be primary concern from the respondents, other concern such as maintenance cost and ease of application into existing application is also highlighted.
Fulltext Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment

Pai YS, Yap HJ, Md Dawal SZ, Ramesh S, Phoon SY

Sci Rep, 2016 06 07;6:27380.
PMID: 27271840 DOI: 10.1038/srep27380

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.
Fulltext A genetic programming approach to oral cancer prognosis

Tan MS, Tan JW, Chang SW, Yap HJ, Abdul Kareem S, Zain RB

PeerJ, 2016;4:e2482.
PMID: 27688975 DOI: 10.7717/peerj.2482

The potential of genetic programming (GP) on various fields has been attained in recent years. In bio-medical field, many researches in GP are focused on the recognition of cancerous cells and also on gene expression profiling data. In this research, the aim is to study the performance of GP on the survival prediction of a small sample size of oral cancer prognosis dataset, which is the first study in the field of oral cancer prognosis.
Fulltext Multi-objective AGV scheduling in an FMS using a hybrid of genetic algorithm and particle swarm optimization

Mousavi M, Yap HJ, Musa SN, Tahriri F, Md Dawal SZ

PLoS One, 2017;12(3):e0169817.
PMID: 28263994 DOI: 10.1371/journal.pone.0169817

Flexible manufacturing system (FMS) enhances the firm's flexibility and responsiveness to the ever-changing customer demand by providing a fast product diversification capability. Performance of an FMS is highly dependent upon the accuracy of scheduling policy for the components of the system, such as automated guided vehicles (AGVs). An AGV as a mobile robot provides remarkable industrial capabilities for material and goods transportation within a manufacturing facility or a warehouse. Allocating AGVs to tasks, while considering the cost and time of operations, defines the AGV scheduling process. Multi-objective scheduling of AGVs, unlike single objective practices, is a complex and combinatorial process. In the main draw of the research, a mathematical model was developed and integrated with evolutionary algorithms (genetic algorithm (GA), particle swarm optimization (PSO), and hybrid GA-PSO) to optimize the task scheduling of AGVs with the objectives of minimizing makespan and number of AGVs while considering the AGVs' battery charge. Assessment of the numerical examples' scheduling before and after the optimization proved the applicability of all the three algorithms in decreasing the makespan and AGV numbers. The hybrid GA-PSO produced the optimum result and outperformed the other two algorithms, in which the mean of AGVs operation efficiency was found to be 69.4, 74, and 79.8 percent in PSO, GA, and hybrid GA-PSO, respectively. Evaluation and validation of the model was performed by simulation via Flexsim software.
Assessing regional left ventricular thickening dysfunction and dyssynchrony via personalized modeling and 3D wall thickness measurements for acute myocardial infarction

Khalid A, Lim E, Chan BT, Abdul Aziz YF, Chee KH, Yap HJ, et al.

J Magn Reson Imaging, 2019 04;49(4):1006-1019.
PMID: 30211445 DOI: 10.1002/jmri.26302

BACKGROUND: Existing clinical diagnostic and assessment methods could be improved to facilitate early detection and treatment of cardiac dysfunction associated with acute myocardial infarction (AMI) to reduce morbidity and mortality.
PURPOSE: To develop 3D personalized left ventricular (LV) models and thickening assessment framework for assessing regional wall thickening dysfunction and dyssynchrony in AMI patients.
STUDY TYPE: Retrospective study, diagnostic accuracy.
SUBJECTS: Forty-four subjects consisting of 15 healthy subjects and 29 AMI patients.
FIELD STRENGTH/SEQUENCE: 1.5T/steady-state free precession cine MRI scans; LGE MRI scans.
ASSESSMENT: Quantitative thickening measurements across all cardiac phases were correlated and validated against clinical evaluation of infarct transmurality by an experienced cardiac radiologist based on the American Heart Association (AHA) 17-segment model.
STATISTICAL TEST: Nonparametric 2-k related sample-based Kruskal-Wallis test; Mann-Whitney U-test; Pearson's correlation coefficient.
RESULTS: Healthy LV wall segments undergo significant wall thickening (P 50% transmurality) underwent remarkable wall thinning during contraction (thickening index [TI] = 1.46 ± 0.26 mm) as opposed to healthy myocardium (TI = 4.01 ± 1.04 mm). For AMI patients, LV that showed signs of thinning were found to be associated with a significantly higher percentage of dyssynchrony as compared with healthy subjects (dyssynchrony index [DI] = 15.0 ± 5.0% vs. 7.5 ± 2.0%, P
Fulltext Automated classification of tropical shrub species: a hybrid of leaf shape and machine learning approach

Murat M, Chang SW, Abu A, Yap HJ, Yong KT

PeerJ, 2017;5:e3792.
PMID: 28924506 DOI: 10.7717/peerj.3792

Plants play a crucial role in foodstuff, medicine, industry, and environmental protection. The skill of recognising plants is very important in some applications, including conservation of endangered species and rehabilitation of lands after mining activities. However, it is a difficult task to identify plant species because it requires specialized knowledge. Developing an automated classification system for plant species is necessary and valuable since it can help specialists as well as the public in identifying plant species easily. Shape descriptors were applied on the myDAUN dataset that contains 45 tropical shrub species collected from the University of Malaya (UM), Malaysia. Based on literature review, this is the first study in the development of tropical shrub species image dataset and classification using a hybrid of leaf shape and machine learning approach. Four types of shape descriptors were used in this study namely morphological shape descriptors (MSD), Histogram of Oriented Gradients (HOG), Hu invariant moments (Hu) and Zernike moments (ZM). Single descriptor, as well as the combination of hybrid descriptors were tested and compared. The tropical shrub species are classified using six different classifiers, which are artificial neural network (ANN), random forest (RF), support vector machine (SVM), k-nearest neighbour (k-NN), linear discriminant analysis (LDA) and directed acyclic graph multiclass least squares twin support vector machine (DAG MLSTSVM). In addition, three types of feature selection methods were tested in the myDAUN dataset, Relief, Correlation-based feature selection (CFS) and Pearson's coefficient correlation (PCC). The well-known Flavia dataset and Swedish Leaf dataset were used as the validation dataset on the proposed methods. The results showed that the hybrid of all descriptors of ANN outperformed the other classifiers with an average classification accuracy of 98.23% for the myDAUN dataset, 95.25% for the Flavia dataset and 99.89% for the Swedish Leaf dataset. In addition, the Relief feature selection method achieved the highest classification accuracy of 98.13% after 80 (or 60%) of the original features were reduced, from 133 to 53 descriptors in the myDAUN dataset with the reduction in computational time. Subsequently, the hybridisation of four descriptors gave the best results compared to others. It is proven that the combination MSD and HOG were good enough for tropical shrubs species classification. Hu and ZM descriptors also improved the accuracy in tropical shrubs species classification in terms of invariant to translation, rotation and scale. ANN outperformed the others for tropical shrub species classification in this study. Feature selection methods can be used in the classification of tropical shrub species, as the comparable results could be obtained with the reduced descriptors and reduced in computational time and cost.