Control synthesis of high quality large-area graphene on transition metals (TMs) by chemical vapor deposition (CVD) is the most fascinating approach for practical device applications. Interaction of carbon atoms and TMs is quite critical to obtain graphene with precise layer number, crystal size and structure. Here, we reveal a solid phase reaction process to achieve Cu assisted graphene growth in nanoscale by in-situ transmission electron microscope (TEM). Significant structural transformation of amorphous carbon nanofiber (CNF) coated with Cu is observed with an applied potential in a two probe system. The coated Cu particle recrystallize and agglomerate toward the cathode with applied potential due to joule heating and large thermal gradient. Consequently, the amorphous carbon start crystallizing and forming sp(2) hybridized carbon to form graphene sheet from the tip of Cu surface. We observed structural deformation and breaking of the graphene nanoribbon with a higher applied potential, attributing to saturated current flow and induced Joule heating. The observed graphene formation in nanoscale by the in-situ TEM process can be significant to understand carbon atoms and Cu interaction.
The endless introduction of toxic heavy metals through industrialization has worsened the heavy metal pollution in the environment. Thus, the need for its effective removal has become more crucial than before. Studies on graphene-based nanomaterials and their use in removing heavy metals are gaining tremendous traction over the past decade. The properties of graphene oxide (GO), such as large surface areas, desired functional groups and excellent mechanical properties are advantageous. Nevertheless, due to its tendency to agglomerate and difficulty in phase separation after treatment, the functionalization of GO using various materials of different surface functional groups is an ongoing study. The surface modification of GO is done by using various materials to introduce heteroatoms, which have high affinity for heavy metals. This review summarizes the utilization of different surface functional groups, such as oxygen-containing, nitrogen-containing, and sulphur-containing functionalized graphene oxide composites in the adsorption of cationic and oxyanionic heavy metals. The toxicity of these heavy metals is also addressed. Furthermore, the interactions between adsorbents and heavy metals which are influenced by pH and surface functional groups, are also discussed in detail. This is followed by the review in adsorption isotherms and kinetics. Future research needs are also offered.
The growth of carbon nanotubes (CNTs) in a flame requires conditions that are difficult to achieve in a highly heterogeneous environment. Therefore, the analysis of the properties of the reaction zone within the flame is critical for the optimal growth of CNTs. In the present study, a comprehensive comparison between the CNT synthesis using a methane diffusion flame and a premixed flame is conducted regarding the morphology and crystallinity of the as-grown nanotubes. The premixed burner configuration created a flame that is stabilized through axisymmetric stagnation flow through sintered metal with one-dimensional geometry, different from a conventional co-flow flame. The significant difference in temperature distribution between the two flames causes a difference in the characteristics of the growth products. In the diffusion flame, the growth is limited to specific regions at certain height-above-burner (HAB) values with a temperature range of 750 to 950 °C at varying radial locations. The identified growth regions at different HAB values showed similar temperature distributions that yield CNTs of similar characteristics. Interestingly, the growth of CNTs in the premixed flame is dictated by only the HAB because the temperature distribution is relatively uniform along the radial directions but significantly different in the vertical direction. 17.3% variation in temperature in the axial direction successfully led to 44% and 66% variation in CNT diameter and crystallinity, respectively. The morphology control capability demonstrated in the present study is important for CNT functionalization for energy storage, nanosensor, and nanocomposite applications, where diameter and crystallinity are influential properties that govern the overall performance of the components.
A vacuum ultraviolet (VUV) field emission lamp was developed by using a neodymium ion doped lutetium fluoride (Nd(3+) : LuF3) thin film as solid-state phosphor and carbon nanofiber field electron emitters. The thin film was synthesized by pulsed laser deposition and incorporated into the lamp. The cathodoluminescence spectra of the lamp showed multiple emission peaks at 180, 225, and 255 nm. These emission spectra were in good agreement with the spectra reported for the Nd(3+) : LuF3 crystal. Moreover, application of an acceleration voltage effectively increased the emission intensity. These results contribute to the performance enhancement of the lamp operating in the VUV region.