MyMedR

Fulltext Polishing Mechanism And Its Effect On The Mechanical Properties Of Ceramic Restorations - A Review Of The Literature

Ahmad, R., Wu, B.W., Morgano, S.M.

Ann Dent, 2001;8(1):-.

MyJurnal

Polishing of dental ceramics has become an increasingly important procedure in restorative dentistry as allceramic restorations, which require post-cementation occlusal adjustment, are gaining in popularity. There are numerous studies in both dental and ceramic literature on polishing of dental ceramics and the effects of polishing on their mechanical properties. However, lack of standardization in polishing parameters, precludes comparison among these studies. A clear understanding is lacking of the relative roles and interdependence of handpiece speed, abrasive characteristic, and polishing load. This paper will discuss the mechanism of polishing and review the literature on polishing and its effect on the mechanical properties of ceramic restorations.

Matched MeSH terms: Dental Polishing

Cleansing and surface modifying agents on implants: fixation and related aspects of aesthetics

Ling BC, Gillings BR

Asian J Aesthet Dent, 1995;3:17-21.

PMID: 9063105

With the prognosis of dental implant replacement of missing teeth becoming better each year, practitioners are focusing their attention on the aesthetic aspects of implantology. However, improvement in aesthetics is only possible with the improvement in implant technology, surgical techniques and prosthodontic procedures. This study aimed at evaluating the effects of various physical and chemical agents on the implant surface; with the view of obtaining increased surface area and biocompatibility. The study found that the treatment of air-aluminum oxide blasted implants using a mixture of 30% HNO3-5% HF acids produced a surface which meets the consideration of aesthetics for implants placed in the anterior maxillary region.

Matched MeSH terms: Dental Polishing*

Fulltext Polishing of the composite resin restorations – literature review.

Gonzalez, M.A.G., Razak, A.A.A., Khokhar, N.H.

Ann Dent, 2010;17(1):25-34.

MyJurnal

The widespread use of aesthetic fillings has highlighted their advantages and disadvantages. One
of the most troublesome features of earlier aesthetic materials was the difficulty of finishing the restoration surface to decrease adherence of food debris. The rougher the finished surface, the greater the possibility of bacterial accumulation and discolouration of restoration along the restoration margin with secondary caries formation. Aside from these clinical implications, patients are highly discerning and could detect roughness of 0.30 μm with their tongue. The aesthetic restoration should mimic the appearance of natural dentition and should have an enamel-like appearance. An increased demand for superior aesthetics from composite resin has increased the
demand for more eff icient and simple polishing techniques. The development of nanocomposites has given a new perspective to the polishing of composite resins. Nanocomposites claim the advantage of improved gloss, optical characteristics and reduced wear. To date, results of in vitro studies have been equivocal regarding the most efficient and effective polishing system. There is variation in the effects of different finishing and polishing instruments on the surface roughness due to great diversity in size, shape, composition and distribution of the filler particles of composite resins, type of resin and a wide variety of finishing and polishing instruments. This paper will
review the different factors that affect polishing techniques used in achieving the desired polish on
composite resin restorations.

Matched MeSH terms: Dental Polishing

Fulltext A comparison of staining resistant of two composite resins

Mior Azrizal M. Ibrahim, Wan Zaripah Wan Bakar, Adam Husein

Archives of Orofacial Sciences, 2009;4(1):13-16.

MyJurnal

Composite resins Amaris is claimed to have hydrophobic effect which minimizes the staining intake. This study is to investigate the colour stability of Amaris compared to Filtek Z250 in coffee solution. Sixty discs of composite resins Filtek Z250 (3M ESPE) and Amaris (Voco) with diameter of 5mm and depth of 2mm were fabricated by packing in a drinking straw and sectioned with hard tissue cutter (Exakt, Japan). The surfaces of the specimens were polished with Sof-Lex disc before each group of the samples is immersed in coffee solution. They were kept in the solution for 4 days at 370C and assessed at the period of 2 hours, 1 day, 2 days, 3 days, and 4 days. The staining was assessed visually and recorded using Lobene (1968) Stain Index and score was given accordingly. The colour changes of both groups were not statistically significant (p

Matched MeSH terms: Dental Polishing

The effect of the surface roughness of porcelain on the adhesion of oral Streptococcus mutans

Al-Marzok MI, Al-Azzawi HJ

J Contemp Dent Pract, 2009;10(6):E017-24.

PMID: 20020077

Dental plaque has a harmful influence on periodontal tissue. When a porcelain restoration is fabricated and refinishing of the glazed surface is inevitable, the increase in surface roughness facilitates the adhesion of plaque and its components. The aim of this in vitro study was to evaluate the effect of surface roughness of glazed or polished porcelain on the adhesion of oral Streptococcus mutans.

Matched MeSH terms: Dental Polishing/methods

An evaluation of the effects of handpiece speed, abrasive characteristics, and polishing load on the flexural strength of polished ceramics

Ahmad R, Morgano SM, Wu BM, Giordano RA

J Prosthet Dent, 2005 Nov;94(5):421-9.

PMID: 16275301

Many studies on the strengthening effects of grinding and polishing, as well as heat treatment on ceramics, are not well standardized or use commercially available industrial polishing systems. The reported effectiveness of these strengthening mechanisms on ceramics may not be applicable to clinical dentistry.

Matched MeSH terms: Dental Polishing/instrumentation*

Effect of one-step polishing system on the color stability of nanocomposites

Alawjali SS, Lui JL

J Dent, 2013 Aug;41 Suppl 3:e53-61.

PMID: 23103847 DOI: 10.1016/j.jdent.2012.10.008

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system.

Matched MeSH terms: Dental Polishing/instrumentation; Dental Polishing/methods*

C-Reactive Protein Levels and Periodontal Diseases During Pregnancy in Malaysian Women

Ahmad A, Nazar Z, Swaminathan D

Oral Health Prev Dent, 2018 7 22;16(3):281-289.

PMID: 30027167 DOI: 10.3290/j.ohpd.a40759

PURPOSE: To investigate the association between plasma CRP levels and periodontal disease during pregnancy.

MATERIALS AND METHODS: Fifty-six pregnant women attending the Antenatal Clinic, UMMC for their first antenatal check-up consented and were recruited for this study: 28 subjects with diseased periodontium (test group) and 28 subjects with healthy periodontium (control). The test group underwent nonsurgical periodontal therapy and the control group was given oral hygiene education. Periodontal parameters and CRP levels were evaluated at baseline and 6 weeks. Pregnancy outcome data were recorded from the Antenatal Clinic, UMMC.

RESULTS: Plasma CRP levels in the test group were statistically significantly elevated compared to the control group (8.55 ± 5.28 mg/l vs 5.66 ± 2.91 mg/l). After nonsurgical periodontal therapy, a statistically significant reduction in the CRP level in the test group (2.06 mg/l) along with statistically significant improvement in periodontal status in both groups was observed. The mean birth weight for infants of both groups showed no statistically significant difference.

CONCLUSIONS: Plasma CRP levels in pregnant women with diseased periodontium were statistically significantly reduced after nonsurgical periodontal therapy. However, no association between CRP levels and adverse pregnancy outcome was observed.

Matched MeSH terms: Dental Polishing

Contour analysis of an implant--soft tissue interface

Chai WL, Moharamzadeh K, van Noort R, Emanuelsson L, Palmquist A, Brook IM

J Periodontal Res, 2013 Oct;48(5):663-70.

PMID: 23442017 DOI: 10.1111/jre.12062

Studies of peri-implant soft tissue on in vivo models are commonly based on histological sections prepared using undecalcified or 'fracture' techniques. These techniques require the cutting or removal of implant during the specimen preparation process. The aim of this study is to explore a new impression technique that does not require any cutting or removal of implant for contour analysis of soft tissue around four types of titanium (Ti) surface roughness using an in vitro three-dimensional oral mucosal model (3D OMM).

Matched MeSH terms: Dental Polishing/methods

Development of a novel model for the investigation of implant-soft tissue interface

Chai WL, Moharamzadeh K, Brook IM, Emanuelsson L, Palmquist A, van Noort R

J. Periodontol., 2010 Aug;81(8):1187-95.

PMID: 20450401 DOI: 10.1902/jop.2010.090648

In dental implant treatment, the long-term prognosis is dependent on the biologic seal formed by the soft tissue around the implant. The in vitro investigation of the implant-soft tissue interface is usually carried out using a monolayer cell-culture model that lacks a polarized-cell phenotype. This study developed a tissue-engineered three-dimensional oral mucosal model (3D OMM) to investigate the implant-soft tissue interface.

Matched MeSH terms: Dental Polishing

Displaying all 10 publications