MyMedR

Displaying all 7 publications

Abstract:

Sort:

Fulltext Effects of partial sugar replacement on the physicochemical and sensory properties of low sugar cookies

Ho, L. H., Pulsawat, M. M.

International Food Research Journal, 2020;27(3):557-567.
MyJurnal

The aim of the present work was to produce low sugar cookies by partial substitution with a
sugar replacer (i.e. maltitol, sorbitol, and isomalt) for sucrose. Four different types of cookies
were prepared. Sucrose was replaced by maltitol, sorbitol, and isomalt at 50% level (based on
relative degree of sweetness of sucrose) to produce CMAL50, CSOR50, and CISO50, respectively. Cookies that contained sucrose represented the control. All the cookies produced were
analysed for chemical properties, physical properties, and sensorial acceptance. The chemical
analysis results indicated that CMAL50, CSOR50, and CISO50 had higher moisture, crude
fibre, and the total carbohydrate content, but with lower ash, crude protein, crude fat, calories,
and total sugar content than the control. CSOR50 showed the lowest total sugar content; thus,
could be denoted as ‘low sugar’ cookies. Cookies containing maltitol and isomalt presented
good physical quality. The hardness value of cookies decreased with 50% substitution of
sorbitol and isomalt for sucrose. CISO50 showed the lowest lightness and yellowness values
than other cookie samples. The sensory evaluation results showed that the cookies incorporated with maltitol and isomalt did not influence the overall acceptability of cookies. In conclusion, the replacement of sucrose with maltitol, sorbitol, and isomalt could reduce sugar and
daily calorie intake. However, sorbitol substitution at 50% level is feasible to produce ‘low
sugar’ cookies, and this cookie could provide benefits to weight and health-conscious
consumers.

Matched MeSH terms: Sugar Alcohols
Fulltext Effect of different types of low sweetness sugar on physicochemical properties of threadfin bream surimi (Nemipterus spp.) during frozen storage

Nopianti, R., Huda, N., Fazilah, A., Ismail, N., Easa, A. M.

International Food Research Journal, 2012;19(3):1011-1021.
MyJurnal

The effects of different types of low-sweetness sugar (lactitol, maltodexrin, palatinit, polydextrose,
trehalose) on the physicochemical properties of threadfin bream (Nemipterus spp.) surimi during six months of frozen storage were investigated. The characteristics analyzed were moisture content, pH, water-holding capacity, whiteness, folding test, gel strength, expressible moisture, and texture profile analyses. Generally, the cryoprotective effectiveness decreased as the storage time increased. Polydextrose was able to maintain a water-holding capacity of 77.0%, 98.6% whiteness, a folding test value of 100%, and a gel strength of 53.6% compared with its initial value during six months of frozen storage. Meanwhile, sucrose was able to maintain a water-holding capacity of 80.3%, 98.6% whiteness, a folding test value of 75%, and a gel strength of 56.8%
compared with its initial value. Raw surimi was able to maintain water holding capacity of 62.2%, 98.7% whiteness, a folding test value of 75%, and a gel strength of 36.0% compared with its initial value. It is suggested that, polydextrose as a potential alternative cryoprotectant to replace other low-sweetness sugars.

Matched MeSH terms: Sugar Alcohols
Binding Hotspot and Activation Mechanism of Maltitol and Lactitol toward the Human Sweet Taste Receptor

Mahalapbutr P, Lee VS, Rungrotmongkol T

J Agric Food Chem, 2020 Jul 29;68(30):7974-7983.
PMID: 32551626 DOI: 10.1021/acs.jafc.0c02580

Human sweet taste receptor (hSTR) recognizes a wide array of sweeteners, resulting in sweet taste perception. Maltitol and lactitol have been extensively used in place of sucrose due to their capability to prevent dental caries. Herein, several molecular modeling approaches were applied to investigate the structural and energetic properties of these two polyols/hSTR complexes. Triplicate 500 ns molecular dynamics (MD) simulations and molecular mechanics/generalized Born surface area (MM/GBSA)-based free energy calculations revealed that the TAS1R2 monomer is the preferential binding site for maltitol and lactitol rather than the TAS1R3 region. Several polar residues (D142, S144, Y215, D278, E302, R383, and especially N143) were involved in polyols binding through electrostatic attractions and H-bond formations. The molecular complexation process not only induced the stable form of ligands but also stimulated the conformational adaptation of the TAS1R2 monomer to become a close-packed structure through an induced-fit mechanism. Notably, the binding affinity of the maltitol/TAS1R2 complex (ΔGbind of -17.93 ± 1.49 kcal/mol) was significantly higher than that of the lactitol/TAS1R2 system (-8.53 ± 1.78 kcal/mol), in line with the experimental relative sweetness. These findings provide an in-depth understanding of the differences in the sweetness response between maltitol and lactitol, which could be helpful to design novel polyol derivatives with higher sweet taste perception.

Matched MeSH terms: Sugar Alcohols/metabolism*; Sugar Alcohols/chemistry
Fulltext A perspective bioproduction of xylitol by enzyme technology and future prospects

Rafiqul, I.S.M., Mimi Sakinah, A.M.

International Food Research Journal, 2012;19(2):405-408.
MyJurnal

Xylitol is a high value sugar alcohol with anticariogenic properties that is used as an ideal sweetener for diabetic patients. Industrially, xylitol is manufactured by catalytic reduction of pure xylose, which has
some disadvantages. The fermentation process has been studied as an alternative, but its viability is dependent on the optimization of several variables. This fermentation process on an industrial-scale is not feasible due to decreased productivity. Compared to the fermentation process, enzymatic method is expected to make a substantial increase in productivity. Enzymatic xylitol production from xylose exist in lignocellulosics is an attractive and promising alternative method to the chemical process. The enzymatic method might be able to overcome the disadvantages of the chemical process. This article reviews the literature on the processes for xylitol production and identifies further ways for improved xylitol production to compete with the current chemical process.

Matched MeSH terms: Sugar Alcohols
Effect of Various Polyols on the Acid-Denatured States of Champedak Galactose-Binding Lectin

Kameel NIA, Shuib AS, Tayyab S

Protein Pept Lett, 2018;25(3):314-324.
PMID: 29384048 DOI: 10.2174/0929866525666180130155007

BACKGROUND: Champedak galactose-binding (CGB) lectin is a tetrameric protein with noncovalently bound monomers, isolated from Artocarpus integer fruit seeds. We had previously reported existence of a structured monomer and an unfolded monomer of CGB lectin at pH 2.5 and pH 1.5, respectively. Polyols are known to induce significant refolding in denatured proteins and stabilize proteins against environmental stresses. Studies on the effect of various polyols on the acid-denatured states of CGB lectin are lacking.
OBJECTIVE: The objective of this study was to investigate the effects of four different polyols, namely, ethylene glycol, erythritol, xylitol and sorbitol on the acid-denatured states of CGB lectin.
METHODS: CGB lectin was subjected to acid denaturation at pH 2.5 and pH 1.5, both in the absence and presence of 30% (w/v) polyols, i.e. ethylene glycol, erythritol, xylitol and sorbitol. Thermal denaturation of the acid-denatured states was also studied in the absence and presence of these polyols. Different spectroscopic probes such as tryptophan fluorescence, ANS fluorescence and far-UV CD spectral signal were used to monitor structural changes in the acid-denatured states of CGB lectin in the presence of polyols.
RESULTS: Presence of erythritol, xylitol and sorbitol in the incubation mixture was found to stabilize the lectin at both pH 2.5 and pH 1.5, as evident from the burial of the hydrophobic clusters and decreased polarity around Trp residues. These polyols also stabilized the acid-denatured states of CGB lectin against thermal denaturation by shifting the thermal transition curves towards higher temperatures. Exposure of the acid-denatured states of CGB lectin, obtained at pH 2.5 and pH 1.5 to 61°C and 51°C, respectively, induced formation of non-native β-structures, compared to that present at 25°C, and this phenomenon was significantly suppressed in the presence of these polyols. Based on the spectral data, both sorbitol and erythritol appeared to exude better stabilizing effect. On the other hand, ethylene glycol was shown to destabilize the aciddenatured states of CGB lectin.
CONCLUSION: Thermal stabilization of the lectin was noticed in the presence of erythritol, xylitol and sorbitol at both pH 2.5 and pH 1.5. These polyols also stabilize the secondary and tertiary structures of the acid-denatured CGB lectin at 25°C. Ethylene glycol was proved to be a destabilizer of the acid-denatured CGB lectin.

Matched MeSH terms: Sugar Alcohols/chemistry*
Fulltext Purification and Characterization of Lipase Produced by Leuconostoc mesenteroides Subsp. mesenteroides ATCC 8293 Using an Aqueous Two-Phase System (ATPS) Composed of Triton X-100 and Maltitol

Eko Sukohidayat NH, Zarei M, Baharin BS, Manap MY

Molecules, 2018 Jul 20;23(7).
PMID: 30037038 DOI: 10.3390/molecules23071800

Purification of lipase produced by L. mesenteroides subsp. mesenteroides ATCC 8293 was conducted for the first time using a novel aqueous two-phase system (ATPS) composed of Triton X-100 and maltitol. The partitioning of lipase was optimized according to several parameters including pH, temperature, and crude load. Results showed that lipase preferentially migrated to the Triton X-100 rich phase and optimum lipase partitioning was achieved in ATPS at TLL of 46.4% and crude load of 20% at 30 °C and pH 8, resulting in high lipase purification factor of 17.28 and yield of 94.7%. The purified lipase showed a prominent band on SDS-PAGE with an estimated molecular weight of 50 kDa. The lipase was stable at the temperature range of 30⁻60 °C and pH range of 6⁻11, however, it revealed its optimum activity at the temperature of 37 °C and pH 8. Moreover, lipase exhibited enhanced activity in the presence of non-ionic surfactants with increased activity up to 40%. Furthermore, results exhibited that metals ions such as Na⁺, Mg2+, K⁺ and Ca2+ stimulated lipase activity. This study demonstrated that this novel system could be potentially used as an alternative to traditional ATPS for the purification and recovery of enzymes since the purified lipase still possesses good process characteristics after undergoing the purification process.

Matched MeSH terms: Sugar Alcohols/pharmacology; Sugar Alcohols/chemistry
Fulltext Saliva pH changes in patients with high and low caries risk after consuming organic (sucrose) and non-organic (maltitol) sugar

Widowati, W., Akbar, S.H., Tin, M.H.

International Medical Journal Malaysia, 2013;12(2):15-21.
MyJurnal

Enamel demineralization is associated with decrease in saliva pH due to fermentation of sugar by oral commensal. Thus, exploring the changing pattern of saliva pH is meaningful in dental caries prevention. The aim of this study was to compare the changing pattern of saliva pH after consuming different types of sweeteners (sucrose and maltitol). Methods: It was a case-control study involving 14 male patients attending IIUM dental clinic who were selected with the intention of getting seven patients with high caries risk ( DMFT ≥6) and seven patients with low caries risk (DMFT ≤3) with initial saliva pH interval of 6.5 to7.5. Patients were asked to consume snacks containing 8 gram sucrose and 8 gram maltitol as sweeteners. The changing pH values of the saliva were measured by Waterproof pHTestr 10BNC (Oakton, Vernon Hills, USA) seven times consecutively at 0 (before snack consumption), and at 5, 10, 15, 20, 30 and 60 minutes after snack consumption. The pH values of saliva of patients with low and high caries risk after consuming sucrose and maltitol were statistically analized by using Anova and Tukey-HSD tests at α = 0.05. Result: There were significant differences in saliva pH changes between low-risk group and high-risk group after consuming sucrose and maltitol. Conclusion: The changing patterns of saliva pH in high-risk patients were lower than those of low-risk patients after consuming two types of snacks containing sucrose and maltitol.

Matched MeSH terms: Sugar Alcohols