Fulltext

Assessment of drinking water quality using Water Quality Index and synthetic pollution index in urban areas of mega city Lahore: a GIS-based approach

Latif M 1 , Nasir N 1 , Nawaz R 2 , Nasim I 1 , Sultan K 1 , Irshad MA 1 Show all authors , Irfan A 3 , Dawoud TM 4 , Younous YA 5 , Ahmed Z 6 , Bourhia M 7

Affiliations 

  • 1 Department of Environmental Sciences, The University of Lahore, Lahore, 54000, Pakistan
  • 2 Department of Environmental Sciences, The University of Lahore, Lahore, 54000, Pakistan. rab.nawaz@envs.uol.edu.pk
  • 3 Department of Chemistry, Government College University Faisalabad, Faisalabad, 38000, Pakistan. raialiirfan@gmail.com
  • 4 Botany and Microbiology Department, College of Science, King Saud University, P.O. Box 2455, 11451, Riyadh, Saudi Arabia
  • 5 Evangelical College, BP 1200, N'Djamena, Chad. scientifcresearcher@gmail.com
  • 6 College of Resource and Civil Engineering, Northeast University, Shenyang, China
  • 7 Laboratory of Biotechnology and Natural Resources Valorization, Faculty of Sciences, Ibn Zohr University, 80060, Agadir, Morocco
Sci Rep, 2024 Jun 11;14(1):13416.
PMID: 38862670 DOI: 10.1038/s41598-024-63296-1

Abstract

The aim of the present study was to assess the drinking water quality in the selected urban areas of Lahore and to comprehend the public health status by addressing the basic drinking water quality parameters. Total 50 tap water samples were collected from groundwater in the two selected areas of district Lahore i.e., Gulshan-e-Ravi (site 1) and Samanabad (site 2). Water samples were analyzed in the laboratory to elucidate physico-chemical parameters including pH, turbidity, temperature, total dissolved solids (TDS), electrical conductivity (EC), dissolved oxygen (DO), total hardness, magnesium hardness, and calcium hardness. These physico-chemical parameters were used to examine the Water Quality Index (WQI) and Synthetic Pollution Index (SPI) in order to characterize the water quality. Results of th selected physico-chemical parameters were compared with World Health Organization (WHO) guidelines to determine the quality of drinking water. A GIS-based approach was used for mapping water quality, WQI, and SPI. Results of the present study revealed that the average value of temperature, pH, and DO of both study sites were within the WHO guidelines of 23.5 °C, 7.7, and 6.9 mg/L, respectively. The TDS level of site 1 was 192.56 mg/L (within WHO guidelines) and whereas, in site 2 it was found 612.84 mg/L (higher than WHO guidelines), respectively. Calcium hardness of site 1 and site 2 was observed within the range from 25.04 to 65.732 mg/L but, magnesium hardness values were higher than WHO guidelines. The major reason for poor water quality is old, worn-out water supply pipelines and improper waste disposal in the selected areas. The average WQI was found as 59.66 for site 1 and 77.30 for site 2. Results showed that the quality of the water was classified as "poor" for site 1 and "very poor " for site 2. There is a need to address the problem of poor water quality and also raise the public awareness about the quality of drinking water and its associated health impacts.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.

MeSH terms
Similar publications