MyMedR

Displaying publications 1 - 20 of 48 in total

Abstract:

Sort:

ACB2015: Biotechnology and bioeconomy for sustainable future

Abd-Aziz S, Faizal Ibrahim M

Biotechnol J, 2016 Jun;11(6):729-31.
PMID: 27273842 DOI: 10.1002/biot.201600156
Effect of agitation and aeration rates on chitinase production using Trichoderma virens UKM1 in 2-l stirred tank reactor

Abd-Aziz S, Fernandez CC, Salleh MM, Illias RM, Hassan MA

Appl Biochem Biotechnol, 2008 Aug;150(2):193-204.
PMID: 18633736 DOI: 10.1007/s12010-008-8140-4

Shrimps have been a popular raw material for the burgeoning marine and food industry contributing to increasing marine waste. Shrimp waste, which is rich in organic compounds is an abundant source of chitin, a natural polymer of N-acetyl-D-glucosamine (GluNac), a reducing sugar. For this respect, chitinase-producing fungi have been extensively studied as biocontrol agents. Locally isolated Trichoderma virens UKM1 was used in this study. The effect of agitation and aeration rates using colloidal chitin as control substrate in a 2-l stirred tank reactor gave the best agitation and aeration rates at 200 rpm and 0.33 vvm with 4.1 U/l per hour and 5.97 U/l per hour of maximum volumetric chitinase activity obtained, respectively. Microscopic observations showed shear sensitivity at higher agitation rate of the above system. The oxygen uptake rate during the highest chitinase productivity obtained using sun-dried ground shrimp waste of 1.74 mg of dissolved oxygen per gram of fungal biomass per hour at the kappaL a of 8.34 per hour.
Sago starch and its utilisation

Abd-Aziz S

J Biosci Bioeng, 2002;94(6):526-9.
PMID: 16233345

The importance and development of industrial biotechnology processing has led to the utilisation of microbial enzymes in various applications. One of the important enzymes is amylase, which hydrolyses starch to glucose. In Malaysia, the use of sago starch has been increasing, and it is presently being used for the production of glucose. Sago starch represents an alternative cheap carbon source for fermentation processes that is attractive out of both economic and geographical considerations. Production of fermentable sugars from the hydrolysis of starches is normally carried out by an enzymatic processes that involves two reaction steps, liquefaction and saccharification, each of which has different temperature and pH optima with respect to the maximum reaction rate. This method of starch hydrolysis requires the use of an expensive temperature control system and a complex mixing device. Our laboratory has investigated the possibility of using amylolytic enzyme-producing microorganisms in the continuous single-step biological hydrolysis of sago flour for the production of a generic fermentation medium. The ability of a novel DNA-recombinated yeast, Saccharomyces cerevisiae strain YKU 107 (expressing alpha-amylase production) to hydrolyse gelatinised sago starch production has been studied with the aim of further utilizing sago starch to obtain value-added products.
Fulltext Combination of Superheated Steam with Laccase Pretreatment Together with Size Reduction to Enhance Enzymatic Hydrolysis of Oil Palm Biomass

Ahmad Rizal NFA, Ibrahim MF, Zakaria MR, Kamal Bahrin E, Abd-Aziz S, Hassan MA

Molecules, 2018 Apr 02;23(4).
PMID: 29614823 DOI: 10.3390/molecules23040811

The combination of superheated steam (SHS) with ligninolytic enzyme laccase pretreatment together with size reduction was conducted in order to enhance the enzymatic hydrolysis of oil palm biomass into glucose. The oil palm empty fruit bunch (OPEFB) and oil palm mesocarp fiber (OPMF) were pretreated with SHS and ground using a hammer mill to sizes of 2, 1, 0.5 and 0.25 mm before pretreatment using laccase to remove lignin. This study showed that reduction of size from raw to 0.25 mm plays important role in lignin degradation by laccase that removed 38.7% and 39.6% of the lignin from OPEFB and OPMF, respectively. The subsequent saccharification process of these pretreated OPEFB and OPMF generates glucose yields of 71.5% and 63.0%, which represent a 4.6 and 4.8-fold increase, respectively, as compared to untreated samples. This study showed that the combination of SHS with laccase pretreatment together with size reduction could enhance the glucose yield.
Fulltext Systematic Review of Brain-Eating Amoeba: A Decade Update

Ahmad Zamzuri M'I, Abd Majid FN, Mihat M, Ibrahim SS, Ismail M, Abd Aziz S, et al.

Int J Environ Res Public Health, 2023 Feb 09;20(4).
PMID: 36833715 DOI: 10.3390/ijerph20043021

INTRODUCTION: Primary amoebic meningoencephalitis (PAM) is a rare but lethal infection of the brain caused by a eukaryote called Naegleria fowleri (N. fowleri). The aim of this review is to consolidate the recently published case reports of N. fowleri infection by describing its epidemiology and clinical features with the goal of ultimately disseminating this information to healthcare personnel.
METHODS: A comprehensive literature search was carried out using PubMed, Web of Science, Scopus, and OVID databases until 31 December 2022 by two independent reviewers. All studies from the year 2013 were extracted, and quality assessments were carried out meticulously prior to their inclusion in the final analysis.
RESULTS: A total of 21 studies were selected for qualitative analyses out of the 461 studies extracted. The cases were distributed globally, and 72.7% of the cases succumbed to mortality. The youngest case was an 11-day-old boy, while the eldest was a 75-year-old. Significant exposure to freshwater either from recreational activities or from a habit of irrigating the nostrils preceded onset. The symptoms at early presentation included fever, headache, and vomiting, while late sequalae showed neurological manifestation. An accurate diagnosis remains a challenge, as the symptoms mimic bacterial meningitis. Confirmatory tests include the direct visualisation of the amoeba or the use of the polymerase chain reaction method.
CONCLUSIONS: N. fowleri infection is rare but leads to PAM. Its occurrence is worldwide with a significant risk of fatality. The suggested probable case definition based on the findings is the acute onset of fever, headache, and vomiting with meningeal symptoms following exposure to freshwater within the previous 14 days. Continuous health promotion and health education activities for the public can help to improve knowledge and awareness prior to engagement in freshwater activities.
Fulltext Enhanced genetic algorithm optimization model for a single reservoir operation based on hydropower generation: case study of Mosul reservoir, northern Iraq

Al-Aqeeli YH, Lee TS, Abd Aziz S

Springerplus, 2016;5(1):797.
PMID: 27390638 DOI: 10.1186/s40064-016-2372-5

Achievement of the optimal hydropower generation from operation of water reservoirs, is a complex problems. The purpose of this study was to formulate and improve an approach of a genetic algorithm optimization model (GAOM) in order to increase the maximization of annual hydropower generation for a single reservoir. For this purpose, two simulation algorithms were drafted and applied independently in that GAOM during 20 scenarios (years) for operation of Mosul reservoir, northern Iraq. The first algorithm was based on the traditional simulation of reservoir operation, whilst the second algorithm (Salg) enhanced the GAOM by changing the population values of GA through a new simulation process of reservoir operation. The performances of these two algorithms were evaluated through the comparison of their optimal values of annual hydropower generation during the 20 scenarios of operating. The GAOM achieved an increase in hydropower generation in 17 scenarios using these two algorithms, with the Salg being superior in all scenarios. All of these were done prior adding the evaporation (Ev) and precipitation (Pr) to the water balance equation. Next, the GAOM using the Salg was applied by taking into consideration the volumes of these two parameters. In this case, the optimal values obtained from the GAOM were compared, firstly with their counterpart that found using the same algorithm without taking into consideration of Ev and Pr, secondly with the observed values. The first comparison showed that the optimal values obtained in this case decreased in all scenarios, whilst maintaining the good results compared with the observed in the second comparison. The results proved the effectiveness of the Salg in increasing the hydropower generation through the enhanced approach of the GAOM. In addition, the results indicated to the importance of taking into account the Ev and Pr in the modelling of reservoirs operation.
Fulltext Evaluation of single reservoir performance for flood risk reduction using a developed simulation model: case study of Makhoul reservoir

Al-Aqeeli, Yousif H., Abd Aziz, S., Wayayok, Aimrun, Badronnisa Yusuf

Pertanika Journal of Science & Technology, 2018;26(2):571-584.
MyJurnal

The objectives of this study were firstly, to develop a simulation model (SM) for a single reservoir to identify the standard operating policy (SOP) of a reservoir based on a monthly operating period, and secondly, to evaluate the performance of the proposed Makhoul reservoir using a Developed Simulation Model (DSM) in reducing flood risk. This reservoir is located on the River Tigris, approximately 180 km upstream of Baghdad, Iraq. The performance of the reservoir in reducing flood risk was evaluated using two designs and records of flood waves gathered over two years. The first design was the present one, while the second was developed by increasing the operational storage to its maximum, based on the digital maps of the region. The flows downstream of the reservoir were compared, with and without the reservoir in the two years in question. Four parameters resulting from the two designs were compared: storage, surface area, elevation and power. The results suggested that the reservoir would be ineffective in reducing flood risk, but it would have the ability to provide hydroelectric power using the two designs, with the new one showing better ability at doing this. The reservoir can also serve purposes such as irrigation, fish wealth development and recreation. This DSM proved its effectiveness in evaluating the performance of the single storage system used for reservoirs.
Bioconversion of domestic wastewater sludge by immobilized mixed culture of penicillum Corylophilum WWZA1003 and Aspergillus niger SCahmA103

Alam MZ, Fakhru'l-Razi A, Idris A, Abd-Aziz S

Artif Cells Blood Substit Immobil Biotechnol, 2002 Jul;30(4):307-18.
PMID: 12227649

The bioconversion of domestic wastewater sludge by immobilized mixed culture of filamentous fungi was investigated in a laboratory. The potential mixed culture of Penicillium corylophilum WWZA1003 and Aspergillus niger SCahmA103 was isolated from its local habitats (wastewater and sludge cake) and optimized on the basis of biodegradability and dewaterability of treated sludge. The observed results in this study showed that the sludge treatment was highly influenced by the effect of immobilized mixed fungi using liquid state bioconversion (LSB) process. The maximum production of dry filter cake (DFC) was enriched with fungal biomass to about 20.05 g/kg containing 23.47 g/kg of soluble protein after 4 days of fungal treatment. The reduction of COD, TSS, turbidity (optical density against distilled water, 660 nm), reducing sugar and protein in supernatant and filtration rate of treated sludge were influenced by the fungal mixed culture as compared to control (uninnoculated). After these processes, 99.4% of TSS, 98.05% of turbidity, 76.2% of soluble protein, 98% of reducing sugar and 92.4% of COD in supernatant of treated sludge were removed. Filtration time was decreased tremendously by the microbial treatment after 2 days of incubation. The effect of fungal strain on pH was also studied and presented. Effective bioconversion was observed after 4 days of fungal treatment.
Fulltext Lard classification from other animal fats using Dielectric Spectroscopy technique

Amat Sairin, M., Abd Aziz, S., Tan, C.P., Mustafa, S., Abd Gani, S.S., Rokhani, F.Z.

International Food Research Journal, 2019;26(3):773-782.
MyJurnal

Lard adulteration in processed foods is a major public concern as it involves religion and
health. Most lard discriminating works require huge lab-based equipment and complex sample
preparation. The objective of the present work was to assess the feasibility of dielectric
spectroscopy as a method for classification of fats from different animal sources, in particular,
lard. The dielectric spectra of each animal fat were measured in the radio frequency of 100
Hz – 100 kHz at 45°C to 55°C. The fatty acid composition of each fat was studied by using
data from gas chromatography mass spectrometry (GCMS) to explain the dielectric behaviour
of each fat. The principal component analysis (PCA) and artificial neural network (ANN)
were used to classify different animal fats based on their dielectric spectra. It was found that
lard showed the highest dielectric constant spectra among other animal fats, and was mainly
affected by the composition of C16 and C18 fatty acids. PCA classification plot showed clear
performance in classifying different animal fats. Finally, ANN classification showed different
animal fats were classified into their respective groups effectively at high accuracy of 85%.
Dielectric spectroscopy, in combination with quantitative analysis, was concluded to provide
rapid method to discriminate lard from other animal fats.
Isolation, screening, and identification of potential cellulolytic and xylanolytic producers for biodegradation of untreated oil palm trunk and its application in saccharification of lemongrass leaves

Ang SK, Yahya A, Abd Aziz S, Md Salleh M

Prep Biochem Biotechnol, 2015;45(3):279-305.
PMID: 24960316 DOI: 10.1080/10826068.2014.923443

This study presents the isolation and screening of fungi with excellent ability to degrade untreated oil palm trunk (OPT) in a solid-state fermentation system (SSF). Qualitative assay of cellulases and xylanase indicates notable secretion of both enzymes by 12 fungal strains from a laboratory collection and 5 strains isolated from a contaminated wooden board. High production of these enzymes was subsequently quantified in OPT in SSF. Aspergillus fumigates SK1 isolated from cow dung gives the highest xylanolytic activity (648.448 U g(-1)), generally high cellulolytic activities (CMCase: 48.006, FPase: 6.860, beta-glucosidase: 16.328 U g(-1)) and moderate lignin peroxidase activity (4.820 U/g), and highest xylanolytic activity. The xylanase encoding gene of Aspergillus fumigates SK1 was screened using polymerase chain reaction by a pair of degenerate primers. Through multiple alignment of the SK1 strain's xylanase nucleotide sequences with other published xylanases, it was confirmed that the gene belonged to the xylanase glycoside hydrolase family 11 (GH11) with a protein size of 24.49 kD. Saccharification of lemongrass leaves using crude cellulases and xylanase gives the maximum reducing sugars production of 6.84 g/L with glucose as the major end product and traces of phenylpropanic compounds (vanillic acid, p-coumaric acid, and ferulic acid).
Fulltext Recovery of glucose from residual starch of sago hampas for bioethanol production

Awg-Adeni DS, Bujang KB, Hassan MA, Abd-Aziz S

Biomed Res Int, 2013;2013:935852.
PMID: 23509813 DOI: 10.1155/2013/935852

Lower concentration of glucose was often obtained from enzymatic hydrolysis process of agricultural residue due to complexity of the biomass structure and properties. High substrate load feed into the hydrolysis system might solve this problem but has several other drawbacks such as low rate of reaction. In the present study, we have attempted to enhance glucose recovery from agricultural waste, namely, "sago hampas," through three cycles of enzymatic hydrolysis process. The substrate load at 7% (w/v) was seen to be suitable for the hydrolysis process with respect to the gelatinization reaction as well as sufficient mixture of the suspension for saccharification process. However, this study was focused on hydrolyzing starch of sago hampas, and thus to enhance concentration of glucose from 7% substrate load would be impossible. Thus, an alternative method termed as cycles I, II, and III which involved reusing the hydrolysate for subsequent enzymatic hydrolysis process was introduced. Greater improvement of glucose concentration (138.45 g/L) and better conversion yield (52.72%) were achieved with the completion of three cycles of hydrolysis. In comparison, cycle I and cycle II had glucose concentration of 27.79 g/L and 73.00 g/L, respectively. The glucose obtained was subsequently tested as substrate for bioethanol production using commercial baker's yeast. The fermentation process produced 40.30 g/L of ethanol after 16 h, which was equivalent to 93.29% of theoretical yield based on total glucose existing in fermentation media.
Improved cellulase production by Botryosphaeria rhodina from OPEFB at low level moisture condition through statistical optimization

Bahrin EK, Ibrahim MF, Abd Razak MN, Abd-Aziz S, Shah UK, Alitheen N, et al.

Prep Biochem Biotechnol, 2012;42(2):155-70.
PMID: 22394064 DOI: 10.1080/10826068.2011.585413

The response surface method was applied in this study to improve cellulase production from oil palm empty fruit bunch (OPEFB) by Botryosphaeria rhodina. An experimental design based on a two-level factorial was employed to screen the significant environmental factors for cellulase production. The locally isolated fungus Botryosphaeria rhodina was cultivated on OPEFB under solid-state fermentation (SSF). From the analysis of variance (ANOVA), the initial moisture content, amount of substrate, and initial pH of nutrient supplied in the SSF system significantly influenced cellulase production. Then the optimization of the variables was done using the response surface method according to central composite design (CCD). Botryosphaeria rhodina exhibited its best performance with a high predicted value of FPase enzyme production (17.95 U/g) when the initial moisture content was at 24.32%, initial pH of nutrient was 5.96, and 3.98 g of substrate was present. The statistical optimization from actual experiment resulted in a significant increment of FPase production from 3.26 to 17.91 U/g (5.49-fold). High cellulase production at low moisture content is a very rare condition for fungi cultured in solid-state fermentation.
Lipase-catalyzed dimethyl adipate synthesis: response surface modeling and kinetics

Chaibakhsh N, Rahman MB, Basri M, Salleh AB, Abd-Aziz S

Biotechnol J, 2010 Aug;5(8):848-55.
PMID: 20632329 DOI: 10.1002/biot.201000063

Dimethyl adipate (DMA) was synthesized by immobilized Candida antarctica lipase B-catalyzed esterification of adipic acid and methanol. To optimize the reaction conditions of ester production, response surface methodology was applied, and the effects of four factors namely, time, temperature, enzyme concentration, and molar ratio of substrates on product synthesis were determined. A statistical model predicted that the maximum conversion yield would be 97.6%, at the optimal conditions of 58.5 degrees C, 54.0 mg enzyme, 358.0 min, and 12:1 molar ratio of methanol to adipic acid. The R(2) (0.9769) shows a high correlation between predicted and experimental values. The kinetics of the reaction was also investigated in this study. The reaction was found to obey the ping-pong bi-bi mechanism with methanol inhibition. The kinetic parameters were determined and used to simulate the experimental results. A good quality of fit was observed between the simulated and experimental initial rates.
Optimized lipase-catalyzed synthesis of adipate ester in a solvent-free system

Chaibakhsh N, Abdul Rahman MB, Abd-Aziz S, Basri M, Salleh AB, Abdul Rahman RN

J Ind Microbiol Biotechnol, 2009 Sep;36(9):1149-55.
PMID: 19479288 DOI: 10.1007/s10295-009-0596-x

Immobilized Candida antarctica lipase-catalyzed esterification of adipic acid and oleyl alcohol was investigated in a solvent-free system (SFS). Optimum conditions for adipate ester synthesis in a stirred-tank reactor were determined by the response surface methodology (RSM) approach with respect to important reaction parameters including time, temperature, agitation speed, and amount of enzyme. A high conversion yield was achieved using low enzyme amounts of 2.5% w/w at 60 degrees C, reaction time of 438 min, and agitation speed of 500 rpm. The good correlation between predicted value (96.0%) and actual value (95.5%) implies that the model derived from RSM allows better understanding of the effect of important reaction parameters on the lipase-catalyzed synthesis of adipate ester in an organic solvent-free system. Higher volumetric productivity compared to a solvent-based system was also offered by SFS. The results demonstrate that the solvent-free system is efficient for enzymatic synthesis of adipate ester.
Fulltext Electrical Impedance Spectroscopy for Moisture and Oil Content Prediction in Oil Palm (Elaeis guineensis Jacq.) Fruitlets

Chin-Hashim NF, Khaled AY, Jamaludin D, Abd Aziz S

Plants (Basel), 2022 Dec 05;11(23).
PMID: 36501412 DOI: 10.3390/plants11233373

The global palm oil industry is targeting an increased oil extraction rate in oil palm milling to meet global demand. This can be achieved through the certification of mills and adherence to bunch grading as part of ensuring that only high-quality and ripe fresh fruit bunches are accepted and processed at all mills. However, the current grading process requires the analysis of oil palm bunches, which is laborious and tedious or prone to error due to human subjectivity. This paper introduces a non-destructive technique to predict the moisture and oil content in oil palm fruitlets using electrical impedance spectroscopy. In total, 90 samples of oil palm fruitlets at different stages of ripeness were acquired. Electrical impedance measurement of each fruitlet was done using electrocardiogram (ECG) electrodes connected to an LCR meter at frequencies of 1 kHz, 10 kHz, 20 kHz, and 100 kHz. The actual oil content in the fruitlets was determined using the Soxhlet extraction method, while the actual moisture content was determined using a standard oven-drying method. The variation of electrical impedance values at each frequency was analyzed. At 100 kHz, the correlation coefficients relating the electrical impedance to the moisture and oil content were around -0.84 and 0.80, respectively. Predictions of the moisture and oil content using linear regression of the impedance measurements at 100 kHz gave RMSE values of 5.85% and 5.71%, respectively. This information is useful for oil palm fruit grading and oil yield production estimation in the palm oil industry.
Fulltext Reduction of the acidity and peroxide numbers of tengkawang butter (Shorea stenoptera) using thermal and acid activated bentonites

Darmawan MA, Muhammad BZ, Harahap AFP, Ramadhan MYA, Sahlan M, Haryuni, et al.

Heliyon, 2020 Dec;6(12):e05742.
PMID: 33364505 DOI: 10.1016/j.heliyon.2020.e05742

Tengkawang fat (Shorea stenoptera), from an indigenous plant of the Kalimantan forest, has excellent potential as an alternative source of vegetable fat because it has a high level of fatty acids composition. Activated natural bentonite can be used as a bleaching agent to improve the quality of tengkawang fat. This research aims to reduce the acidity, peroxide number values and identify the physicochemical properties (fatty acid composition, nutrients, and thermal) of tengkawang butter. Initially, tengkawang samples from Nanga Yen and Sintang were pre-treated using the degumming process with 1% phosphoric acid and the neutralization process with a 1 M NaOH 10% w/w solution. The results show that the acidity (mg NaOH/g) of the tengkawang fat samples was reduced from 11.00 to 3.36 when using bentonite activated at 200 °C. The bentonite activated with 0.5 M HCl reduced the acidity to 3.61. The peroxide number (meq O2/kg) of the tengkawang fat samples was reduced from 9.45 to 4.84 and 3.47 by bleaching with thermal-activated and acid-activated bentonites, respectively. Peroxide value correlates with β-carotene content. The smaller of the β-carotene content, the smaller the peroxide value. The acidity, peroxide number, and iodine number values from tengkawang fat after treatment adhere to the SNI 2903: 2016 standard. The main content of fatty acids in tengkawang fat is palmitic acid, stearic acid, and oleic acid. These results show that both products are suitable for the food industry in terms of the acid and peroxide numbers. The application of this research results will assist local people in increasing the economic value of the product from tengkawang plant, which is an indigenous plant from Kalimantan.
Domestic wastewater biosolids accumulation by liquid state bioconversion process for rapid composting

Fakhru'l-Razi A, Alam MZ, Idris A, Abd-Aziz S, Molla AH

J Environ Sci Health A Tox Hazard Subst Environ Eng, 2002 Sep;37(8):1533-43.
PMID: 12369644

Bioconversion of higher strength of domestic wastewater biosolids (sludge) (4% w/w of TSS) by mixed fungal culture of Aspergillus niger and Penicillium corylophilum was studied in a laboratory. The effect of potential mixed fungi on domestic wastewater sludge accelerated the liquid state bioconversion (LSB) process. The highest production of dry sludge cake (biosolids) was enriched with fungal biomass to about 85.66 g/kg containing 25.23 g/kg of protein after 8 days of treatment. The results presented in this study revealed that the reduction of chemical oxygen demand (COD), total suspended solid (TSS), and specific resistance to filtration (SRF) of treated sludge were highly influenced by the fungal culture as compared to control (uninnoculated). The maximum removal rates in treated sludge (biosolids) supernatant recorded were 92% of COD and 98.8% of TSS. Lower SRF (1.08 x 10(12) m/kg) was perceived in microbially treated sludge after 6 days of fermentation. The observed parameters were highly influenced after 8 days of treatment. The influence of pH was also studied and presented in the paper.
Filamentous fungi in Indah Water Konsortium (IWK) sewage treatment plant for biological treatment of domestic wastewater sludge

Fakhrul-Razi A, Alam MZ, Idris A, Abd-Aziz S, Molla AH

J Environ Sci Health A Tox Hazard Subst Environ Eng, 2002 Mar;37(3):309-20.
PMID: 11929070

A study was carried out to isolate and identify filamentous fungi for the treatment of domestic wastewater sludge by enhancing biodegradability, settleability and dewaterability of treated sludge using liquid state bioconversion process. A total of 70 strains of filamentous fungi were isolated from three different sources (wastewater, sewage sludge and leachate) of IWK's (Indah Water Konsortium) sewage treatment plant, Malaysia. The isolated strains were purified by conventional techniques and identified by microscopic examination. The strains isolated belonged to the genera of Penicillium, Aspergillus, Trichoderma, Spicaria and Hyaloflorae The distribution of observed isolated fungi were 41% in sewage sludge followed by 39% in wastewater and 20% in leachate. The predominant fungus was Penicillium (39 strains). The second and third most common isolates were Aspergillus (14 strains) and Trichoderma (12 strains). The other isolates were Spicaria (3 strains) and Hyaloflorae (2 strains). Three strains (WWZP1003, LZP3001, LZP3005) of Penicillium (P. corylophilum, P. waksmanii, and P. citrinum respectively), 2 strains (WWZA1006 and SS2017) of Aspergillus (A. terrues and A. flavus respectively) and one strain (SSZT2008) of Trichoderma (T. harzianum) were tentatively identified up to species level and finally verified by CABI Bioscience Identification Services, UK.
Crude cellulase from oil palm empty fruit bunch by Trichoderma asperellum UPM1 and Aspergillus fumigatus UPM2 for fermentable sugars production

Ibrahim MF, Razak MN, Phang LY, Hassan MA, Abd-Aziz S

Appl Biochem Biotechnol, 2013 Jul;170(6):1320-35.
PMID: 23666614 DOI: 10.1007/s12010-013-0275-2

Cellulase is an enzyme that converts the polymer structure of polysaccharides into fermentable sugars. The high market demand for this enzyme together with the variety of applications in the industry has brought the research on cellulase into focus. In this study, crude cellulase was produced from oil palm empty fruit bunch (OPEFB) pretreated with 2% NaOH with autoclave, which was composed of 59.7% cellulose, 21.6% hemicellulose, and 12.3% lignin using Trichoderma asperellum UPM1 and Aspergillus fumigatus UPM2. Approximately 0.8 U/ml of FPase, 24.7 U/ml of CMCase and 5.0 U/ml of β-glucosidase were produced by T. asperellum UPM1 at a temperature of 35 °C and at an initial pH of 7.0. A 1.7 U/ml of FPase, 24.2 U/ml of CMCase, and 1.1 U/ml of β-glucosidase were produced by A. fumigatus UPM2 at a temperature of 45 °C and at initial pH of 6.0. The crude cellulase was best produced at 1% of substrate concentration for both T. asperellum UPM1 and A. fumigatus UPM2. The hydrolysis percentage of pretreated OPEFB using 5% of crude cellulase concentration from T. asperellum UPM1 and A. fumigatus UPM2 were 3.33% and 19.11%, with the reducing sugars concentration of 1.47 and 8.63 g/l, respectively.
Oil palm empty fruit bunch as alternative substrate for acetone-butanol-ethanol production by Clostridium butyricum EB6

Ibrahim MF, Abd-Aziz S, Razak MN, Phang LY, Hassan MA

Appl Biochem Biotechnol, 2012 Apr;166(7):1615-25.
PMID: 22391689 DOI: 10.1007/s12010-012-9538-6

Acetone-butanol-ethanol (ABE) production from renewable resources has been widely reported. In this study, Clostridium butyricum EB6 was employed for ABE fermentation using fermentable sugar derived from treated oil palm empty fruit bunch (OPEFB). A higher amount of ABE (2.61 g/l) was produced in a fermentation using treated OPEFB as the substrate when compared to a glucose based medium that produced 0.24 g/l at pH 5.5. ABE production was increased to 3.47 g/l with a yield of 0.24 g/g at pH 6.0. The fermentation using limited nitrogen concentration of 3 g/l improved the ABE yield by 64%. The study showed that OPEFB has the potential to be applied for renewable ABE production by C. butyricum EB6.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links