Objectives. This article aims to prompt first-line workers to go beyond regular job roles and engage in more discretionary safety behavior-safety participation in the Chinese construction industry. The construction industry is a high-risk industry, and first-line workers are more likely to be exposed to workplace hazards. Once accidents happen, the negative consequences would come out. Therefore, employee voluntary safety behavior is focused on in this research. Methods. The present research framework examines the roles of safety leadership and safety management practices from the group and organizational perspectives in predicting the voluntary safety behavior (safety participation) of first-line workers in the Chinese construction industry through casual-chain mediators (safety climate and job satisfaction). In this study, partial least squares structural equation modeling (PLS-SEM) is adopted for data analysis and hypotheses testing. Results. After data analysis, the results show that safety leadership and safety management practices are significantly and positively associated with safety participation of first-line workers through safety climate and job satisfaction. Moreover, safety management practices have a more statistical effect on safety climate compared to safety leadership. Conclusions. These results provide some practical implications for facilitating the workers to conduct safety participation inthe construction industry.
The agriculture sector is a traditional economic pillar of many emerging economies. However, it is facing greater occupational health and safety (OHS) challenges in Pakistan, and its performance is continuously decreasing. An effective OHS implementation provides better control over OHS challenges and may help to restore its former glory. Therefore, this study aims to explore different organizational decision-making styles and safety accountability to put OHS into practice in this sector. Based on institutional theory, a theoretical framework was developed. Two hundred and eighty-seven agriculture farms in Punjab, Pakistan were surveyed and analyzed using SmartPLS 3.3.7. The findings revealed that implementation styles (rational and incremental) and safety accountability positively impact OHS implementation. Similarly, the moderating role of mimetic motives was found positively significant in the relationship between rational style and OHS implementation, and negatively significant in the relationship between incremental style and OHS implementation. While no moderating effect of mimetic motive was found between safety accountability and OHS implementation. This study suggested that OHS implementation should not be viewed as a social or technical issue alone. Strategic arrangements should be made at the organizational level to gain better control over OHS challenges by considering the institutional environment in which the organization operates.
This study illustrates about the most hazardous and risky activities associated with well drilling operation at on and offshore
oil and gas drilling sites by adopting exploratory research design (quantitative leading to qualitative). In this study researcher has
targeted three oil and gas industries each from Malaysia, Saudi Arabia and Pakistan for the identification of associated hazards
and nature of hazardous activities faced by drilling crew during well drilling operation. Eighty (80) drilling crew members have
been randomly selected for answering the survey questionnaire. Likewise, nine (09) drilling health and safety officials have been
conveniently selected based on their safety expertise in oil and gas drilling field for semi structured in-depth interview. For analyzing
quantitative findings descriptive statistical methods has been used. While for qualitative section thematic analysis approach has
been utilized. Based on the findings, respondents from Malaysian oil and gas industries reported starting drilling activity as highly
hazardous at onshore well drilling, while handling drilling pipe has been considered more hazardous activity at offshore domain.
Similarly, in the context of Saudi Arabia, respondents highlighted that the handling drilling pipes are cause of major injuries at onshore
well drilling site. Whereas drilling fluid preparation and coring process is considered harmful at offshore sites. In contrast, participant
from Pakistan indicated coring process as a highly hazardous activity at on and offshore well drilling operation. According to overall
results based on the participant response, oil and gas well drilling operation at onshore domain is considered more hazardous
at Pakistani oil and gas industry as compare to other targeted industries with mean range 3.42. While for offshore well drilling,
Malaysian industry is recorded highly hazardous as compare to others leading with mean value 3.39 and related with chemical and
safety hazards in well drilling activities.
Environmental degradation is frequently cited as one of the eminent issues in the modern era. To limit environmental degradation, prior literature discerns several macroeconomic, socio-economic, and institutional factors that affect environmental degradation. However, the relationship between geopolitical risk and environmental degradation is understudied in the previous literature. To fill this gap, the inquiry at hand aims to scrutinize the influence of geopolitical risk on environmental degradation for E7 countries while controlling the effect of renewable energy, non-renewable energy, and GDP. Further, we utilize both the ecological footprint and CO2 emissions as proxies of environmental degradation and employ second-generation panel methods for robust findings. In addition to this, the present study uses augmented mean group (AMG) estimator to provide long-run relationship among the selected variables. The findings from the AMG estimator expound that there exists environmental Kuznets curve (EKC) for E7 countries. Moreover, renewable energy ameliorates environmental quality because it plunges both ecological footprint and CO2 emissions. On the contrary, non-renewable energy consumption escalates both ecological footprint and CO2 emissions. Finally, geopolitical risk tends to decrease CO2 emissions as well as ecological footprint. Our findings deduce a few policy implications to replenish environmental quality. For instance, the share of renewables in the energy mix should be surged to ameliorate the environmental quality. Further, to control both the geopolitical risk and environmental degradation at the same time, policymakers should put forward reforms and initiatives (e.g., policies to escalate R&D, technological innovations, and tax exemptions on imports of renewables) that can help to improve environmental quality without affecting geopolitical risk. At times of low geopolitical risk, environmental degradation will surge; therefore, the rate of environmental control taxes should be increased by the policymakers.
The main objective of the present study was to explore the potential of matrix tablets as extended release dosage form of tianeptine, using HMPC K100 as a polymer. HPMC K100 extended the release of the drug from formulation due to the gel-like structure. Direct compression method was adopted to compress the tablets using different concentrations of polymer. Tablets were evaluated for pre-compression and post-compression parameters. Drug release study showed that tablet extends the release of drug with the increasing concentration of polymer. Drug, polymers and tablets were analyzed and/or characterized for compatibility, degradation, thermal stability, amorphous or crystalline nature via FTIR, DSC, TGA, XRD studies. SEM study predicted that tablets had a uniform structure. HPMC K100 based tablets were similar to that of the reference product. Acute toxicity study conducted on Swiss albino mice showed that matrix tablets were safe and non-toxic, as no changes in physical activity and functions of organs were observed. Biochemical and histopathological study revealed lack of any kind of abnormality in liver and renal function. Moreover, necrotic changes were absent at organ level.
The purpose of this study is to investigate the incidence of service failure in rendering service process during COVID-19. It further explores the outcomes of service recovery offered to customers in case of service failure. Like other businesses, webstores have also faced the challenges in their efforts to satisfy their customers during COVID-19. Service failure has increased due to unexpected circumstances produced by this pandemic. It has become necessary for the webstores to retain their dissatisfied customers by reconsidering their service strategies. Relevant data for the purpose of this study were collected through questionnaires from 383 respondents by using online channels. The online channels were exclusively employed for maintaining the safety of respondents during COVID-19. Respondents for this study were online shoppers who encountered service failure during COVID-19. The results indicated that the incidence of service failure has increased due to an increase in online shopping during COVID-19. Some customers tend to repurchase from the same webstore. On the other hand, some customers do not want to purchase again from the same seller and decided to switch to the alternative webstore. Based on the findings, new strategy for online shopping service providers was introduced. This strategy will be helpful for the online service providers to increase their profitability by retaining their dissatisfied customers. Service providers can minimize the number of customers switching to other webstores by reducing the events of service failure. Customer's assistive intent can also be helpful for service providers to increase the efficiency of service recovery. Conducting a proper follow-up after providing service recovery can also reduce the switching of customer. It will be helpful for service providers to understand the customers' expectations before recovery process and their feeling after getting service recovery.
The optoelectronic and structural characteristics of the Zn1-xCrxSe (0 ≤ x ≤ 1) semiconductor are reported by employing density functional theory (DFT) within the mBJ potential. The findings revealed that the lattice constant decreases with increasing Cr concentration, although the bulk modulus exhibits the opposite trend. ZnSe is a direct bandgap material; however, a change from direct to indirect electronic bandgap has been seen with Cr presence. This transition is caused by structural alterations by Cr and defects forming, which results in novel optical features, including electronic transitions. The electronic bandgap decreases from 2.769 to 0.216 eV, allowing phonons to participate and improving optical absorption. A higher concentration of Cr boosts infrared absorption and these Cr-based ZnSe (ZnCrSe) semiconductors also cover a wider spectrum in the visible range from red to blue light. Important optical parameters such as reflectance, optical conductivity, optical bandgap, extinction coefficient, refractive index, magnetization factor, and energy loss function are discussed, providing a theoretical understanding of the diverse applications of ZnCrSe semiconductors in photonic and optoelectronic devices.
The increase in global energy consumption and the related ecological problems have generated a constant demand for alternative energy sources superior to traditional ones. This is why unlimited photon-energy harnessing is important. A notable focus to address this concern is on advancing and producing cost-effective low-loss solar cells. For efficient light energy capture and conversion, we fabricated a ZnPC:PC70BM-based dye-sensitized solar cell (DSSC) and estimated its performance using a solar cell capacitance simulator (SCAPS-1D). We evaluated the output parameters of the ZnPC:PC70BM-based DSSC with different photoactive layer thicknesses, series and shunt resistances, and back-metal work function. Our analyses show that moderate thickness, minimum series resistance, high shunt resistance, and high metal-work function are favorable for better device performance due to low recombination losses, electrical losses, and better transport of charge carriers. In addition, in-depth research for clarifying the impact of factors, such as thickness variation, defect density, and doping density of charge transport layers, has been conducted. The best efficiency value found was 10.30% after tweaking the parameters. It also provides a realistic strategy for efficiently utilizing DSSC cells by altering features that are highly dependent on DSSC performance and output.