The first evidence for the Higgs boson decay to a Z boson and a photon is presented, with a statistical significance of 3.4 standard deviations. The result is derived from a combined analysis of the searches performed by the ATLAS and CMS Collaborations with proton-proton collision datasets collected at the CERN Large Hadron Collider (LHC) from 2015 to 2018. These correspond to integrated luminosities of around 140 fb^{-1} for each experiment, at a center-of-mass energy of 13 TeV. The measured signal yield is 2.2±0.7 times the standard model prediction, and agrees with the theoretical expectation within 1.9 standard deviations.
A qualitative study was conducted with semistructured interviews to explore the experiences of well-being in 15 adult palliative care inpatients of University Malaya Medical Center, Kuala Lumpur, Malaysia. The results were thematically analyzed. Six basic themes were generated (1) positive attitude, (2) positive cognitions, (3) positive emotions, (4) positive engagement, (5) positive relationships, and (6) positive circumstances. The Seeds Model was conceptualized from the analysis. This model may inform the development of interventions in the enhancement of well-being of palliative care patients.
A qualitative study was conducted with semistructured interviews to explore the experiences of stress in 20 palliative care providers of University Malaya Medical Centre in Malaysia. The results were thematically analyzed. Nine basic themes were generated: (1) organizational challenges, (2) care overload, (3) communication challenges, (4) differences in opinion, (5) misperceptions and misconceptions, (6) personal expectations, (7) emotional involvement, (8) death and dying thoughts, and (9) appraisal and coping. A total care model of occupational stress in palliative care was conceptualized from the analysis. This model may inform the development of interventions in the prevention and management of stress in palliative care.
Tin-based materials have been intensively studied as attractive candidates for high-capacity and long-cycle-life anodes in Li-ion batteries (LIBs) owing to their low cost and high energy density. However, they all suffer from severe structural decay during the lithium ion insertion/extraction process, which results in deterioration in the overall performance of the batteries. To mitigate this problem, we have synthesized a Mo-doped SnO2 nanostructure via a facile hydrothermal method, which then fragmented into ultrafine particles after dozens of cycles. The fracture-resistant size and ample contact with Super-P and Li2O greatly improved the electrochemical kinetics and cyclability to deliver a reversible capacity of 670 mA h g-1 after 700 cycles, which demonstrated the potential suitability of Mo-doped SnO2 nanoparticles as a long-cycle-life anode material. Then, the compounds were uniformly dispersed in carbon nanofibers and reduced in situ to prepare a free-standing anode via electrospinning and carbonization. When used directly as an anode in LIBs (without a polymeric binder or conductive agent, as well as a current collector), the nanofiber membrane anode delivered comparable cycling performance and capacity to that of a slurry-coated electrode.
Lithium-sulfur (Li-S) batteries have attracted great attention owing to their excellent electrochemical properties, such as the high discharge voltage of 2.3 V, specific capacity of 1675 mA h g(-1) and energy density of 2600 Wh kg(-1). The widely used slurry made electrodes of Li-S batteries are plagued by the serious shuttle effect and insulating nature of sulfur. Herein, a reduced graphene oxide coated porous carbon nanofiber flexible paper (rGO@S-PCNP) was fabricated and directly used as an additive-free cathode for Li-S batteries. The results show that the rGO@S-PCNP is certified to be effective at relieving the shuttle effect and improving the conductivity, thus achieving high electrochemical performance. The rGO@S-PCNP composite with a sulfur content of 58.4 wt% delivers a high discharge capacity of 623.7 mA h g(-1) after 200 cycles at 0.1 C (1 C = 1675 mA g(-1)) with the average Coulombic efficiency of 97.1%. The excellent cyclability and high Coulombic efficiency indicate that the as-prepared rGO@S-PCNP composite paper can be a promising cathode for lithium-sulfur batteries, and is envisioned to have great potential in high energy density flexible power devices. This facile strategy brings great significance for large-scale industrial fabrication of flexible lithium-sulfur batteries.
Phytomining technology cultivates hyperaccumulator plants on heavy metal contaminated soils, followed by biomass harvesting and incineration to recover valuable metals, offering an opportunity for resource recycling and soil remediation. Large areas of ultramafic soils, naturally rich in nickel (Ni), are present in numerous places around the world. As an environmentally friendly and cost-effective soil remediation technology, phytomining has a broad application prospect in such areas and thus has attracted great attention from global researchers. The key processes of phytomining include: (1) high-selectivity response of hyperaccumulator plants to Ni the underlying mechanisms involved in the rhizosphere; (2) underlying mechanisms of high-efficiency uptake and translocation of Ni in hyperaccumulators; and (3) resource recycling of high-added value Ni products from the Ni-rich bio-ore of hyperaccumulators. In recent 30 years, phytomining practices have successfully carried out in United States, Albania and Malaysia. However, the research and application of this technology in China are still in the fledging stage. This paper reviews the key processes and research progress of phytomining, and points out the bottleneck, to provide theoretical basis and technical guidance for phytomining.
Water availability needs to be accurately assessed to understand and effectively manage hydrologic environments. However, the estimation of evapotranspiration (ET) is prone to errors due to the complex interactions that occur between the atmosphere, the Earth's surface, and vegetation cover. This paper proposes a novel approach for analyzing the sources of inaccuracy in estimating the annual ET using the Budyko framework (BF), particularly temporal variability in precipitation (P), potential evapotranspiration (EP), runoff (R), and the change in soil storage (ΔS). Error decomposition is employed to determine the individual contributions of P, R, EP, and ΔS to the ET error variance at 12 locations in the state of Illinois using a dataset covering a 22-year period. To the best of our knowledge, this study represents the first BF-based investigation that considers R in the error decomposition of the predicted ET variance. The ET error variance increases with the variance in the P and R in Illinois and decreases with the covariance between these two variables. In addition, when accounting for ΔS in the BF, the scenario in which ΔS affects the total available water (i.e., P) is reliable, with a low prediction error and a 13.87 % lower root mean square error compared with the scenario in which the effect of ΔS is negligible. We thus recommend the inclusion of ΔS and R as key variables in the BF to improve water budget estimations.
In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.
Artificial electronic synapses are commonly used to simulate biological synapses to realize various learning functions, regarded as one of the key technologies in the next generation of neurological computation. This work used a simple spin coating technique to fabricate polyimide (PI):graphene quantum dots(GQDs) memristor structure. As a result, the devices exhibit remarkably stable exponentially decaying postsynaptic suppression current over time, as interpreted in the spike-timing-dependent plasticity phenomenon. Furthermore, with the increase of the applied electrical signal over time, the conductance of the electrical synapse gradually changes, and the electronic synapse also shows plasticity dependence on the amplitude and frequency of the pulse applied. In particular, the devices with the structure of Ag/PI:GQDs/ITO prepared in this study can produce a stable response to the stimulation of electrical signals between millivolt to volt, showing not only high sensitivity but also a wide range of "feelings", which makes the electronic synapses take a step forwards to emulate biological synapses. Meanwhile, the electronic conduction mechanisms of the device are also studied and expounded in detail. The findings in this work lay a foundation for developing brain-like neuromorphic modeling in artificial intelligence.
INTRODUCTION: None of the quantitative scales for public attitudes toward epilepsy had been translated to Malay language. This study aimed to translate and test the validity and reliability of a Malay version of the Public Attitudes Toward Epilepsy (PATE) scale.
METHOD: The translation was performed according to standard principles and tested in 140 Malay-speaking adults aged more than 18 years for psychometric validation.
RESULTS: The items in each domain had similar standard deviations (equal item variance), ranging from 0.90 to 1.00 in the personal domain and from 0.87 to 1.23 in the general domain. The correlation between an item and its domain was 0.4 and above for all items and was higher than the correlation with the other domain. Multitrait analysis showed that the Malay PATE had a similar variance, floor and ceiling effects, and relative relationship between the domains as the original PATE. The Malay PATE scale showed a similar correlation with almost all demographic variables except age. Item means were generally clustered in the factor analysis as the hypothesized domains, except those for items 1 and 2. The Cronbach's α values were within acceptable range (0.757 and 0.716 for the general and personal domains, respectively).
CONCLUSION: The Malay PATE scale is a validated and reliable translated version for measuring public attitudes toward epilepsy.
A quantitative scale of public attitudes toward epilepsy is essential to determine the magnitude of social stigma against epilepsy. This study aims to develop and validate a cross-culturally applicable scale of public attitudes toward epilepsy.
Students' attitudes toward epilepsy have been studied in several countries, but none of the studies used a quantitative scale. We aimed to determine the validity and reliability of the Public Attitudes Toward Epilepsy (PATE) scale in a homogenous population consisting of secondary and tertiary students in Malaysia and to quantify their attitudes toward epilepsy, using a web-based survey.
INTRODUCTION: There is a lack of study comparing the attitudes toward epilepsy between the teachers and general population, teachers and students, using a similar quantitative scale.
METHODS: This study was performed in one primary and one secondary school in Kuala Lumpur, Malaysia, using the Public Attitudes Toward Epilepsy (PATE) scale.
RESULTS: A total of 186 teachers aged 39.6±10.4 years completed the questionnaire. The mean scores in both personal and general domains of PATE scale were significantly better in the teachers, comparing to the scores in the secondary and college students reported in previous study (Lim et al., 2013; p<0.001 and <0.05, respectively). The mean scores in personal domain was significantly better in the teachers, comparing to the general population reported by Lim et al. (2012; p<0.001). This hold true when comparing teachers with general population with tertiary education, suggesting that the better attitude is specific to the job, rather than tertiary education generally. Subanalysis showed that the attitudes of teachers were significantly better than the general population and the students related to employment and social life, but were equally negative on issues directly related to education, such as placing children with epilepsy in regular classes.
CONCLUSION: Teachers had more positive attitudes toward epilepsy as compared with the general population with tertiary education. Attitude to epilepsy may differ specific to types of work.
The effect of melatonin treatment on the carotenoid metabolism in broccoli florets during storage was explored. The results indicated that 100 µmol/L of melatonin maintained the sensory quality of broccoli florets, which retarded the increase of the L* value and the decrease of the H value. Melatonin treatment increased the activities of tryptophan decarboxylase (TDC), tryptamine 5-hydroxylase (T5H), serotonin N-acetyltransferase (SNAT) and N-acetylserotonin methyltransferase (ASMT), leading to the enrichment of endogenous melatonin content in broccoli florets. Meanwhile, the treatment inhibited the concentrations of β-carotene, β-cryptoxanthin, zeaxanthin and lutein, which was beneficial in delaying the yellowing of broccoli. In addition, a series of carotenoid biosynthetic genes such as BoPSY, BoPDS, BoZDS, BoLCYβ and BoZEP was also suppressed by melatonin. Further analysis revealed that the lower carotenoid content and the down-regulated BoNCED expression in treated broccoli resulted in less accumulation of abscisic acid precursors, inhibiting abscisic acid production during the yellowing process.
To develop a highly efficient adsorbent to remediate and remove hexavalent chromium ions (Cr(VI)) from polluted water, cellulose acetate (CA) and chitosan (CS), along with metal oxides (titanium dioxide (TiO2) and ferroferric oxide (Fe3O4)), and a zirconium-based metal-organic framework (UiO-66) were used to fabricate the composite porous nanofiber membranes through electrospinning. The adsorption performance, influencing factors, adsorption kinetics and isotherms of composite nanofiber membranes were comprehensively investigated. The multi-layer membrane with interpenetrating nanofibers and surface functional groups enhanced the natural physical adsorption and provided potential chemical sites. The thermal stability was improved by introducing TiO2 and UiO-66. CA/CS/UiO-66 exhibited the highest adsorption capacity (118.81 mg g-1) and removal rate (60.76%), which were twice higher than those of the control. The correlation coefficients (R2) of all the composite nanofibers regressed by the Langmuir model were significantly higher than those by the Freundlich model. The pseudo-first-order kinetic curve of CA/CS composite nanofibers showed the highest R2 (0.973), demonstrating that the whole adsorption process involved a combination of strong physical adsorption and weak chemical adsorption by the amino groups of CS. However, the R2 values of the pseudo-second-order kinetic model increased after incorporating TiO2, Fe3O4, and UiO-66 into the CA/CS composite nanofiber membranes since an enhanced chemical reaction with Cr (VI) occured during the adsorption.
Topological defect nucleation and boundary branching in crystal growth on a curved surface are two typical elastic instabilities driven by curvature induced stress, and have usually been discussed separately in the past. In this work they are simultaneously considered during crystal growth on a sphere. Phase diagrams with respect to sphere radius, size, edge energy and stiffness of the crystal for the equilibrium crystal morphologies are achieved by theoretical analysis and validated by Brownian dynamics simulations. The simulation results further demonstrate the detail of morphological evolution governed by these two different stress relaxation modes. Topological defect nucleation and boundary branching not only compete with each other but also coexist in a range of combinations of factors. Clarification of the interaction mechanism provides a better understanding of various curved crystal morphologies for their potential applications.
To investigate large structural clonal mosaicism of chromosome X, we analysed the SNP microarray intensity data of 38,303 women from cancer genome-wide association studies (20,878 cases and 17,425 controls) and detected 124 mosaic X events >2 Mb in 97 (0.25%) women. Here we show rates for X-chromosome mosaicism are four times higher than mean autosomal rates; X mosaic events more often include the entire chromosome and participants with X events more likely harbour autosomal mosaic events. X mosaicism frequency increases with age (0.11% in 50-year olds; 0.45% in 75-year olds), as reported for Y and autosomes. Methylation array analyses of 33 women with X mosaicism indicate events preferentially involve the inactive X chromosome. Our results provide further evidence that the sex chromosomes undergo mosaic events more frequently than autosomes, which could have implications for understanding the underlying mechanisms of mosaic events and their possible contribution to risk for chronic diseases.
Higher levels of circulating adiponectin have been related to lower risk of colorectal cancer in several prospective cohort studies, but it remains unclear whether this association may be causal. We aimed to improve causal inference in a Mendelian Randomization meta-analysis using nested case-control studies of the European Prospective Investigation into Cancer and Nutrition (EPIC, 623 cases, 623 matched controls), the Health Professionals Follow-up Study (HPFS, 231 cases, 230 controls) and the Nurses' Health Study (NHS, 399 cases, 774 controls) with available data on pre-diagnostic adiponectin concentrations and selected single nucleotide polymorphisms in the ADIPOQ gene. We created an ADIPOQ allele score that explained approximately 3% of the interindividual variation in adiponectin concentrations. The ADIPOQ allele score was not associated with risk of colorectal cancer in logistic regression analyses (pooled OR per score-unit unit 0.97, 95% CI 0.91, 1.04). Genetically determined twofold higher adiponectin was not significantly associated with risk of colorectal cancer using the ADIPOQ allele score as instrumental variable (pooled OR 0.73, 95% CI 0.40, 1.34). In a summary instrumental variable analysis (based on previously published data) with higher statistical power, no association between genetically determined twofold higher adiponectin and risk of colorectal cancer was observed (0.99, 95% CI 0.93, 1.06 in women and 0.94, 95% CI 0.88, 1.01 in men). Thus, our study does not support a causal effect of circulating adiponectin on colorectal cancer risk. Due to the limited genetic determination of adiponectin, larger Mendelian Randomization studies are necessary to clarify whether adiponectin is causally related to lower risk of colorectal cancer.