A study of heavy metal contents in freshwater snails from rice fields have been made. The results indicate that the levels of heavy metals, Pb, Cu, Zn and Cd, are low and within the permissible limit of Malaysian Food Regulations. The results can serve as background data for further reference.
The Juru River flows through largely urbanized areas and is grossly polluted by domestic wastes and discharges from pig farms. Other than carrying highly polluting organic materials, these wastes are also contaminated with heavy metals. To ascertain the extent of heavy metal pollution in the river, total and non-residual concentrations of Cu, Pb, Zn, Mn and Fe in sediment samples collected along the river were determined. The results indicate that both the total and non-residual metal concentrations in sediments can successfully be used to identify heavy metal pollution sources. The speciation of Zn, Mn and Fe in the sediment samples were investigated using a sequential leaching technique which identifies the elements among six operationally defined host fractions: (1) exchangeable, (2) carbonate and surface-associated, (3) easily reducible, (4) moderately reducible, (5) bound to organic matter and sulphides and (6) residual. The results indicate that Zn is mainly associated with the reducible fractions. Zn and Fe found in the moderately reducible fraction are significantly correlated, indicating that iron oxides is the preferred host phase by Zn.
A preliminary study on the concentration and distribution of heavy metals (Cd, Co, Cr, Cu, Ni, Pb and Zn) was carried out for the whole of Ranau District. Topsoil samples (0-15 cm depth) were collected randomly in accordance with the distribution of soil associations in the area. It was found that only three of the heavy metals (Ni, Cr, and Cu) were present above the threshold of toxicity level, whilst the others were below this level. These higher levels of heavy metal concentration were most likely associated with the mining activities in the headwater of the study area and also to the occurrence of serpentinite parent material. The area affected is confined only to the northern part of the study area.
Kajian awal bagi menentukan taburan dan kepekatan logam-logam berat (Cd, Co, Cr, Cu, Ni, Pb dan Zn) telah dijalankan bagi seluruh daerah Ranau. Sample tanah atas (kedalaman 0-15 cm) telah dikutip secara rawak bergantung kepada taburan asosiasi tanah di kawasan tersebut. Didapati bahawa hanya tiga daripada logam berat ini (Ni, Cr dan Cu) melebihi had keracunan, sementara yang lain berada di bawah paras keracunan. Kepekatan logam berat yang tinggi di dalam sampel kajian' dapat dikaitkan dengan aktiviti pelombongan tembaga di kawasan punca air dan juga dengan batuan serpentinit yang menjadi bahan induk tanah. Kawasan yang terlibat terhad di bahagian utara kawasan kajian sahaja.
A study of the heavy metal bio-accumulation by fresh water fish, Tilapia nilotica around Lohan Dam was carried out in aquarium system. The study showed that the fish tissues cultured in contaminated water samples, (location S3 and 54) contain higher heavy metals concentration compared with the fish cultured in uncontaminated water samples (S1 and S2). The concentrations of Fe, Zn, Mn, Cu, Ni and Cr in fish tissues are higher compared with those of Co, Cd and Pb. The bio-accumulation rates of Zn, Mn, Cu, Ni and Co are 25 times higher than those of the base levels and 10 times higher than those of the controls. The heavy metal bio-accumulation order in T. nilotica is as follows: Mn> Cu> Cr> Ni> Co> Zn> Pb> Cd> Fe. The heavy metal intakes by fish during the experimental period did not exceed the level concentration levels.
Kajian bioakumulasi logam berat oleh ikan air tawar, Tilapia nilotica di perairan sekitar Empangan Lohan dilakukan dengan kaedah ternakan akuarium. Hasil kajian menunjukkan tisu ikan yang diternak dalam sampel air tercemar (lokasi S3 dan S4) mengandungi logam berat yang lebih tinggi dari tisu ikan yang diternak dalam sampel air tidak tercemar (lokasi S1 dan S2). Kepekatan logam berat seperti Fe, Zn, Mn, Cu, Ni dan Cr didapati tinggi dalam tisu ikan berbanding dengan kepekatan Co, Cd dan Pb. Kadar bioakumulasi logam berat daIam ikan didapati tinggi bagi Zn, Mn, Cu, Ni dan Co yang masing-masing melebihi 25 kali ganda dari paras asal dan lebih 10 kali ganda dari paras kawalan. Siri bioakumulasi logam berat yang dikaji dalam ikan T. nilotica menurut urutan; Mn> Cu> Cr> Ni> Co> Zn> Pb> Cd> Fe. Kepekatan logam berat yang dapat diambil oleh ikan dalam masa kajian tidak mencapai nilai yang dapat menyebabkan kematian kepada ikan.
A study on the kinetics of accumulation and depuration of Zn, Cu, Pb and Cd by the oysters (Crassostrea iredalei and Crassostrea belcheri) cultured at two locations in the Merbok Estuary, Malaysia was conducted. A first-order kinetic model was employed to fit the experimental data in order to estimate the rate constants for uptake and elimination processes and to predict the bioconcentration factors (BCF). Among the four metals studied, only the Zn accumulation process could not be modelled using first-order kinetics. The elimination rate constants estimated from depuration data for C. iredalei are found to be much greater than those from accumulation data. The results suggest that the values of kinetic parameters and BCFs derived under conditions of both aqueous and dietary exposure are probably more site- than species-specific.
Heavy metals in the aquatic environment have to date come mainly from naturally occurring geochemical materials. However, this has been enhanced by human activity such as gold mining in the case of heavy metal pollution in Sg Sarawak Kanan. The high suspended solid loads in the river have quite efficiently removed most soluble metals from the water and trapped them in the bottom sediment. Three freshwater mollusc species were collected at the point source of the heavy metal pollutants and analysed for the heavy metal contents in their tissues and shells. Two of the mollusc species (Brotia costula and Melanoides tuberculata) are purely freshwater species while the Clithon sp. nr retropictus is able to survive in fresh and brackish water environments. The Brotia costula and the Clithon sp. are the edible species which are sold in the market. Accumulation of As, Cu, Fe, Se and Zn in all the three mollusc species were determined and the level of As in the tissues of Brotia costula and the Clithon sp. was much higher than the permissible level for human consumption. The mollusc species also demonstrated different preferences for the uptake of different metals. Variations in the heavy metal contents in the shell and tissues of the same species were also observed.
Non-living biomass of Pycnoporus sanguineus has an ability to take up lead,copper and cadmium ions from an aqueous solution. The role played by various functional groups in the cell wall and the mechanism uptake of lead, copper and cadmium by Pycnoporus sanguineus were investigated. Modification of the functional groups such as lipids, carboxylic and amino was done through chemical pretreatment in order to study their role in biosorption of metal ions. Results showed that the chemical modification of these functional groups has modified the ability of biomass to remove lead, copper and cadmium ions from the solution. Scanning electron microscopy was also used to study the morphological structure of the biomass before and after adsorption. The electron micrograph indicated that the structure of biomass changed due to the adsorption of the metals onto the cell walls. Furthermore, the X-ray energy dispersion analysis (EDAX) showed that the calcium ion present in the cell wall of biomass was released and replaced by lead ions. This implied that an ion exchange is one of the principal mechanisms for metal biosorption.
Inductively Coupled Argon Plasma Atomic Emission Spectroscopy (ICP-AES) has been used to determine Pb, Zn and Cu levels in 47 exfoliated human teeth (all of which required extraction for orthodontic reasons). Lead concentrations for the group were 1.7 microg (g tooth mass)(-1) to 40.5 microg (g tooth mass)(-1). with a median of 9.8 microg (g tooth mass)(-1). A median lead level in excess of the group value was found for the teeth of six lorry drivers who were included in the study. A more significant enhancement was found for the seven subjects whose age was in excess of 60 years. The median values for Zn and Cu were 123.0 and 0.6 microg (g tooth mass)(-1) respectively. Present values for tooth-Zn are lower than published data for other ethnic groups.
Currently, the generated brake lining waste dust, which contains asbestos as its major component, is disposed of into a secure landfill without any additional treatment. As an alternative to this, solidification/stabilization (S/S) disposal of the dust was investigated using Portland cement alone and Portland cement mixed with activated carbon (AC), as the binders. Toxicity Characteristics Leaching Procedure (TCLP) results on the solidified matrix showed that cement was able to immobilize the heavy metals, Ba, Zn, Cr, Pb, Cu and Fe, to within the limits set by the US EPA for TCLP. Addition of AC to the cement reduced the leaching of heavy metals by an additional 4-24% compared to cement alone. The pH of the TCLP leachate extracted from virgin cement, and from dust treated with cement with or without AC was found to increase to 10.9-12.5 as opposed to an initial value of 4.93 for the TCLP extract for the untreated dust. Results of ANS 16.1 (modified) leach protocol revealed that Ba in cement-treated samples showed the highest leach rate, followed by Zn, Pb, Cr, Cu and Fe. The leach rate of heavy metals decreased with progress in time. Cement mixed with AC exhibited similar leach characteristics, however, the leach rate was lower. The linear relationship between the cumulative fraction leached (CFL) and the square root of leaching time in all cement-based samples indicate that a diffusional process is the controlling transport mechanism for the leaching of the heavy metals. The obtained Leachability Indices (L(i)) of 7.6-9.1 and 8.3-9.5 for cement and cement with AC, respectively, were low but exceeded the guidance value of 6, which clearly indicates that all the heavy metals studied are retained well within solid matrices. Cement-based S/S hardening times increased from 30 to 96 h as the dust content increased from 40 to 70 wt.%. The resulting solid matrices exhibited a compressive strength ranging from 1 to 12 MPa, which was well above the specified limit of 414 kPa for such matrices. An economic analysis indicates that the disposal costs for the dust in the only available secure landfill would increase by 40.3% if one were to go for the cement S/S option. Addition of AC to the cement would escalate this by an additional 43.8%. Although the S/S of brake lining dust using cement effectively immobilized the heavy metals of concern, cost considerations may hinder the commercial adaptation of this technique for waste disposal unless new regulatory demands are implemented.
The speciation patterns of Cu, Cd, Zn, Pb, Fe and Mn in sediment samples under anoxic and oxidized conditions were investigated using three-stage, four-stage and five-stage sequential extraction schemes. All the extraction schemes identify the non-residual metal among three basic operationally-defined host fractions, namely, exchangeable, reducible and organic/sulfide bound. The anoxic sediment samples were found to have been oxidized during the extraction stage for the reducible fraction under the three-stage and four-stage schemes and the moderately reducible fraction under the five-stage scheme despite the maintenance of an oxygen-free environment. This artifact has resulted in an over-representation of the reducible fraction and an under-representation of the organic/sulfide fraction in the heavy metal speciation patterns of anoxic sediment samples. For Cd, Zn and Pb which had > 70% associated with the acid volatile sulfide in the organic/sulfide fraction, this artifact has resulted in the observation of a decrease in the reducible fraction and, in some cases, an increase in the organic/sulfide fraction upon oxidation of the anoxic sediment samples.
Landfills are sources of groundwater and soil pollution due to the production of leachate and its migration through refuse. This study was conducted in order to determine the extent of groundwater and soil pollution within and around the landfill of Seri Petaling located in the State of Selangor, Malaysia. The condition of nearby surface water was also determined. An electrical resistivity imaging survey was used to investigate the leachate production within the landfill. Groundwater geochemistry was carried out and chemical analysis of water samples was conducted upstream and downstream of the landfill. Surface water was also analyzed in order to determine its quality. Soil chemical analysis was performed on soil samples taken from different locations within and around the landfill in the vadose zone (unsaturated zone) and below the water table (in the soil saturated zone). The resistivity image along line L-L1 indicated the presence of large zones of decomposed waste bodies saturated with highly conducting leachate. Analysis of trace elements indicated their presence in very low concentrations and did not reflect any sign of heavy metal pollution of ground and surface water or of soil. Major ions represented by Na, K, and Cl were found in anomalous concentrations in the groundwater of the downstream bore hole, where they are 99.1%, 99.2%, and 99.4%, respectively, higher compared to the upstream bore hole. Electrical conductivity (EC) was also found in anomalous concentration downstream. Ca and Mg ions represent the water hardness (which is comparatively high downstream). There is a general trend of pollution towards the downstream area. Sulfates (SO4) and nitrates (NO3) are found in the area in low concentrations, even below the WHO standards for drinking water, but are significantly higher in the surface water compared to the groundwater. Phosphate (PO4) and nitrite (NO2), although present in low levels, are significantly higher at the downstream. There is no significant difference in the amount of fluoride (F) in the different locations. In the soil vadose zone, heavy metals were found to be in their typical normal ranges and within the background concentrations. Soil exchangeable bases were significantly higher in the soil saturated zone compared to the vadose zone, and no significant difference was obtained in the levels of inorganic pollutants. With the exception of Cd, the concentration ranges of all trace elements (Cu, Zn, Cr, Pb, and Ni) of Seri Petaling landfill soils were below the upper limits of baseline concentrations published from different sources.
The ability of Pycnoporus sanguineus to adsorb heavy metals from aqueous solution was investigated in fixed-bed column studies. The experiments were conducted to study the effect of important design parameters such as column bed height, flow rate and initial concentration of solution. The breakthrough profiles were obtained in these studies. A mathematical model based on external mass transfer and pore diffusion was used for the prediction of mass transfer coefficient and effective diffusivity of metals in macro-fungi bed. Experimental breakthrough profiles were compared with the simulated breakthrough profiles obtained from the mathematical model. Bed Depth Service Time (BDST) model was used to analyse the experimental data and evaluated the performance of biosorption column. The BDST model parameters needed for the design of biosorption columns were evaluated for lead, copper and cadmium removal in the column. The columns were regenerated by eluting the metal ions using 0.1 M hydrochloric acid solution after the adsorption studies. The columns were subjected to repeated cycles of adsorption of same metal ions and desorption to evaluate the removal efficiency after adsorption-desorption.
Leaf samples of tropical trees, i.e. Dryobalanops lanceolata (Kapur paji), Dipterocarpaceae and Macaranga spp. (Mahang), Euphorbiaceae were analyzed for 21 chemical elements. The pioneer Macaranga spp. exhibited higher concentrations for the majority of elements compared to the emergent species of Dryobalanops lanceolata, which was attributed to the higher physiological activity of the fast growing pioneer species compared to emergent trees. Lead showed rather high concentrations in several samples from the Bakam re-forestation site. This is suggested to be caused by emissions through brick manufacturing and related activities in the vicinity. A comparison of Dryobalanops lanceolata samples collected in 1993, 1995 and 1997 in the Lambir Hills National Park revealed that certain heavy metals, i.e. Co, Cu, Mn, Ni, Pb and Ti showed higher values in 1997 compared to the previous years, which could indicate an atmospheric input from the haze caused by the extensive forest fires raging in Borneo and other parts of Southeast Asia.
Toxicity testing of four heavy metals (Cd, Cu, Mn and As) using four species of tropical marine phytoplankton, Chaetoceros calcitrans, Isochrysis galbana, Tetraselmis tetrahele and Tetraselmis sp., was carried out in multiwell plates with test volumes of 2 mL and the results compared to those of standard, large volume, shake-flasks. IC50 values (concentrations of metals estimated to inhibit 50% growth relative to the control) were determined after 96 hours based on automated O.D. readings measured in Elisa microplates by a Multiskan spectrophotometer. Good agreement was achieved between O.D. readings and cell counts indicating that this new method is a simple, economical, practical and rapid technique for toxicity testing, and provides good reproducibility of IC50 values. Results of the toxicity tests indicate that Cu was the most toxic metal (average IC50 values ranging from 0.04 to 0.37 mg L(-1)), followed by Cd (0.06-5.7 mg L(-1)), Mn (7.2-21.4 mg L(-1)) and As (33.9-319.3 mg L(-1)). Test species had different degrees of sensitivity to the metals tested, with I. galbana and C. calcitrans the most sensitive to Cu, Cd and Mn. Based on these findings it is recommended that the existing Malaysian Interim Standards for Marine Water Quality for Cd and Cu be reviewed.
Total concentrations and speciation of cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn) in surface sediment samples were correlated with the respective metal measured in the total soft tissue of the green-lipped mussel Perna viridis, collected from water off the west coast of Peninsular Malaysia. The aim of this study is to relate the possible differences in the accumulation patterns of the heavy metals in P. viridis to those in the surface sediment. The sequential extraction technique was employed to fractionate the sediment into 'freely leachable and exchangeable' (EFLE), 'acid-reducible,' 'oxidisable-organic' and 'resistant' fractions. The results showed that significant (P .05) was found between Zn in P viridis and all the sediment geochemical fractions of Zn and total Zn in the sediment. This indicated that Zn was possibly regulated from the soft tissue of P. viridis. The present results supported the use of P viridis as a suitable biomonitoring agent for Cd, Cu and Pb.
Ash produced from a hospital waste incinerator was treated using a high temperature melting process at 1200 degrees C. The quality of the produced slag was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), leaching tests and sequential chemical extraction of metals. The slag contained large amounts of SiO(2,) CaO, Al(2)O(3), Sn, Ni, Cu, Ba and B. XRD analysis revealed a moderate crystal structure for the melted slag and identified the main crystals as quartz (SiO(2)), kaolinite (Al(2)Si(2)O(5)(OH)(4)), albite (NaAlSi(3)O(8)) and gibbsite (Al(OH)(3)). The observed crystal structure assists in preventing the leaching of heavy metals from the slag. Furthermore, the leaching results found the produced slag to comply with disposal limits set by the US EPA. Results from sequential chemical extraction analysis showed that metals in the slag exhibited the strongest preference to be bound to the residual fraction (stable fraction), which is known to have very low leaching characteristics. Melting was found to stabilize heavy metals in hospital waste successfully and therefore it can be an acceptable method for disposal.
Carbide sludge (10.4-11.5 tonnes day(-1)) is generated from the reaction of calcium carbide (900 kg) and water (6,000 L) in the production of acetylene (2,400 m3), in three selected acetylene manufacturing plants. The sludge (of pH 12.2 and containing Cu, Pb, Fe, Mn, Ni and Zn ions whose concentrations exceed the Department of Environment limits for industrial wastewater) was treated by vacuum filtration as a substitute for the ponding system, which is environmentally less acceptable. A similar system by flocculation was also developed. The filtration system represents an improvement over the ponding method, as shown by a pH of 7 for the clear filtrate; the solid cake, which contains 98% of the metals, can be conveniently disposed at an integrated scheduled waste treatment centre.
Some of the major concerns when applying sewage sludge to land include the potential effect on pH and cation exchange capacity; the mobility and the accumulation of heavy metals in sludge treated soil; the potential of applying too much nutrients and the problems associated with odors and insects. The main objective of this study is to identify the effects of sewage sludge application on the physical and chemical properties of sludge treated soil. Sewage sludge was applied to soil at various rates ranging from 0 L/m2 to 341 L/m2. In order to simulate the natural environment, the study was carried out at a pilot treatment site (5.2 m x 6.7 m) in an open area, covered with transparent roofing material to allow natural sunlight to pass through. Simulated rain was applied by means of a sprinkler system. Data obtained from sludge treated soil showed that the pH values decreased when the application rates were increased and the application period prolonged. The effect of sewage sludge on cation exchange capacity was not so clear; the values obtained for every application rate of sewage sludge did not indicate any consistent behaviour. The mobility of heavy metals in soils treated with sludge were described by observing the changes in the concentration of the heavy metals. The study showed that Cd has the highest mobility in sludge treated soil followed by Cu, Cr, Zn, Ni and Pb.