Displaying publications 1 - 20 of 75 in total

Abstract:
Sort:
  1. Fulltext Evaluation of closed vessel microwave digestion of fish muscle with various solvent combinations using fractional factorial design
    Low, K.H., Zain, S.M., Abas, M.R., Ali Mohd, M.
    ASM Science Journal, 2009;3(1):71-76.
    MyJurnal
    Fractional factorial design was utilized to evaluate the effect of combinations of nitric acid, hydrogen peroxide, hydrochloric acid and water for microwave digestion of fish muscle. Upon digestion, copper, iron and zinc were determined by flame atomic absorption spectroscopy. H2O2 and HCl volumes were found to be the most significant parameters which resulted in good metal recoveries. This is especially so for the effect of HCl on Fe recovery. The results indicated that the combination of 4 mL 65% HNO3, 2 mL 30% H2O2 and 2 mL 30% HCl gave the most satisfactory percentage recovery. There was good agreement between measured and certified values for all metals with respect to the DORM-3 fish protein.
    Matched MeSH terms: Spectrophotometry, Atomic
  2. Fulltext Mercury release from a Sn-Cu-Zn free amalgam
    Lui JL, Tong SL, Teh SK
    Ann Dent, 1994;1(1):1-4.
    MyJurnal
    The mercury controversy related to dental amalgam is still continuing. In Malaysia, part of, this controversy has been attributed to a recently - introduced dental amalgam claimed to be non-mercury releasing and causing no mercury toxicity. The purpose of this study was to investigate whether this amalgam, Composil, was indeed non-mercury releasing. Six specimens each of Composil and a control (GS-80) were incubated at 3TC in deionised-distilled water. The daily mercury release was determined over a four-week study period using the stationary cold-vapour atomic absorption spectrometric method. The mean mercury release of Composil was 30.9 Ilg/cm2/ 24hr whilst that of GS-80 was 0.9 Ilg/cm2124hr and the difference was found to be highly significant (P < 0.00l). Results of this study therefore did not substantiate the manufacturer's claim. The release of mercury from amalgam restorations and their implications in clinical practice were also discussed.
    Matched MeSH terms: Spectrophotometry, Atomic
  3. Lead concentrations in breast milk of Malaysian urban and rural mothers
    Huat LH, Zakariya D, Eng KH
    Arch. Environ. Health, 1983 7 1;38(4):205-9.
    PMID: 6614999
    This study was conducted to determine lead concentrations in breast milk among urban and rural mothers in Malaysia, and to determine if lead absorption among urban maternal populations in Malaysia poses a potential health hazard to infants through breastfeeding. Milk samples, which were collected from 89 urban and 91 rural mothers, were analyzed by flameless atomic absorption spectrophotometry. The mean lead level in urban samples was 0.0253 microgram/ml, which was significantly higher than that of the rural samples (0.0211 microgram/ml). The estimated daily lead intake of breast-fed infants in Malaysia was well below proposed tolerable levels. There also appeared to be no specific pattern in the milk lead levels at different periods of lactation. The significance of the higher milk lead concentrations in urban mothers is also discussed.
    Matched MeSH terms: Spectrophotometry, Atomic
  4. Correlation of Arsenic Levels in Smokeless Tobacco Products and Biological Samples of Oral Cancer Patients and Control Consumers
    Arain SS, Kazi TG, Afridi HI, Talpur FN, Kazi AG, Brahman KD, et al.
    Biol Trace Elem Res, 2015 Dec;168(2):287-95.
    PMID: 25975948 DOI: 10.1007/s12011-015-0355-y
    It has been extensively reported that chewing of smokeless tobacco (SLT) can lead to cancers of oral cavity. In present study, the relationship between arsenic (As) exposure via chewing/inhaling different SLT products in oral cancer patients have or/not consumed SLT products was studied. The As in different types of SLT products (gutkha, mainpuri, and snuff) and biological (scalp hair and blood) samples of different types of oral cancer patients and controls were analyzed. Both controls and oral cancer patients have same age group (ranged 30-60 years), socio-economic status, localities, and dietary habits. The concentrations of As in SLT products and biological samples were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials. The resulted data of present study indicates that the concentration of As was significantly higher in scalp hair and blood samples of oral cancer patients than those of controls (p<0.001). It was also observed that the values of As were two- to threefolds higher in biological samples of controls subjects, consuming SLT products as compared to those have none of these habits (p>0.01). The intake of As via consuming different SLT may have synergistic effects, in addition to other risk factors associated with oral cancer.
    Matched MeSH terms: Spectrophotometry, Atomic
  5. The accumulation and distribution of trace metals in some localized marine species
    Yusof AM, Rahman NA, Wood AK
    Biol Trace Elem Res, 1994;43-45:239-49.
    PMID: 7710833
    Trace elements, such as As, Co, Cr, Hg, Sb, and Zn, were determined by neutron activation analysis (NAA), whereas Cd, Cu, and Pb were determined by graphite furnace atomic absorption spectroscopy (GFAAS) in clam, crab, prawn, swamp cerith, and mussel samples after digestion by microwave heating under controlled conditions before eluting the solutions through a column of a chelating resin, Chelex-100. The standard used in the determination of percentage volatile elements retained by microwave digestion and also in the activation process was Lobster Hepatopancreas TORT-1, whereas known mixed standards were prepared from nitrate salts to determine the efficiency of the separation procedure at a controlled pH. Mercury and lead detected in crabs exceeded the maximum permissible level. Some species also showed a high affinity toward certain elements, and their levels of accumulation in the tissues of these species corresponded with the concentration of these elements in sediments, especially at sites in the vicinity of an industrial zone.
    Matched MeSH terms: Spectrophotometry, Atomic
  6. Mercury, lead, and other heavy metals in Chinese medicines
    Wong MK, Koh LL
    Biol Trace Elem Res, 1986 Aug;10(2):91-7.
    PMID: 24254355 DOI: 10.1007/BF02795561
    Ninety-nine samples of common Chinese medicines were purchased from Chinese medical shops in Singapore and Malaysia and analyzed for mercury, lead, copper, cadmium, cobalt, iron, and nickel. The majority of these medicines were manufactured in China, Hong Kong, and Malaysia. A few of them were of Singapore and Taiwan origin. Atomic absorption method (both flame and flameless) was used for the analyses. Mercury was found to be present in high concentrations in several of the medicines that were for oral consumption.
    Matched MeSH terms: Spectrophotometry, Atomic
  7. An assessment of heavy metal bioaccumulation in Asian swamp eel, Monopterus albus, during plowing stages of a paddy cycle
    Sow AY, Ismail A, Zulkifli SZ
    Bull Environ Contam Toxicol, 2013 Jul;91(1):6-12.
    PMID: 23666324 DOI: 10.1007/s00128-013-1009-4
    Livers and muscles of swamp eels (Monopterus albus) were analyzed for bioaccumulation of heavy metals during the plowing stage of a paddy cycle. Results showed heavy metals were bioaccumulated more highly in liver than muscle. Zinc (Zn) was the highest bioaccumulated metal in liver (98.5 ± 8.95 μg/g) and in muscle (48.8 ± 7.17 μg/g). The lowest bioaccumulated metals were cadmium (Cd) in liver (3.44 ± 2.42 μg/g) and copper (Cu) in muscle (0.65 ± 0.20 μg/g). In sediments, Zn was present at the highest mean concentration (52.7 ± 2.85 μg/g), while Cd had the lowest mean concentration (1.04 ± 0.24 μg/g). The biota-sediment accumulation factor (BSAF) for Cu, Zn, Cd and nickel (Ni) in liver tissue was greater than the corresponding BSAF for muscle tissue. For the three plowing stages, metal concentrations were significantly correlated between liver and muscle tissues in all cases, and between sediment and either liver or muscle in most cases. Mean measured metal concentrations in muscle tissue were below the maximum permissible limits established by Malaysian and U.S. governmental agencies, and were therefore regarded as safe for human consumption.
    Matched MeSH terms: Spectrophotometry, Atomic
  8. Multivariate and Geoaccumulation Index evaluation in mangrove surface sediment of Mengkabong lagoon, Sabah
    Praveena SM, Ahmed A, Radojevic M, Abdullah MH, Aris AZ
    Bull Environ Contam Toxicol, 2008 Jul;81(1):52-6.
    PMID: 18506379 DOI: 10.1007/s00128-008-9460-3
    Spatial variations in estuarine intertidal sediment have been often related to such environmental variables as salinity, sediment types, heavy metals and base cations. However, there have been few attempts to investigate the difference condition between high and low tides relationships and to predict their likely responses in an estuarine environment. This paper investigates the linkages between environmental variables and tides of estuarine intertidal sediment in order to provide a basis for describing the effect of tides in the Mengkabong lagoon, Sabah. Multivariate statistical technique, principal components analysis (PCA) was employed to better interpret information about the sediment and its controlling factors in the intertidal zone. The calculation of Geoaccumulation Index (I(geo)) suggests the Mengkabong mangrove sediments are having background concentrations for Al, Cu, Fe, and Zn and unpolluted for Pb. Extra efforts should therefore pay attention to understand the mechanisms and quantification of different pathways of exchange within and between intertidal zones.
    Matched MeSH terms: Spectrophotometry, Atomic
  9. Heavy metals from agricultural soils from Cameron Highlands, Pahang, and Cheras, Kuala Lumpur, Malaysia
    Khairiah J, Lim KH, Ahmad-Mahir R, Ismail BS
    Bull Environ Contam Toxicol, 2006 Oct;77(4):608-15.
    PMID: 17123022 DOI: 10.1007/s00128-006-1106-8
    Matched MeSH terms: Spectrophotometry, Atomic
  10. Effects of salinity and pre-exposure on acute cadmium toxicity to seabass, Lates calcarifer
    Shazili NA
    Bull Environ Contam Toxicol, 1995 Jan;54(1):22-8.
    PMID: 7756781
    Matched MeSH terms: Spectrophotometry, Atomic
  11. Heavy metal contents in coastal water fishes of West Malaysia
    Babji AS, Embong MS, Woon WW
    Bull Environ Contam Toxicol, 1979 Dec;23(6):830-6.
    PMID: 519067
    Matched MeSH terms: Spectrophotometry, Atomic
  12. Concentrations of Cadmium, Copper, and Zinc in Macrobrachium rosenbergii (Giant Freshwater Prawn) from Natural Environment
    Idrus FA, Basri MM, Rahim KAA, Rahim NSA, Chong MD
    Bull Environ Contam Toxicol, 2018 Mar;100(3):350-355.
    PMID: 29344698 DOI: 10.1007/s00128-018-2270-3
    This study analyzed the levels of cadmium (Cd), copper (Cu), and zinc (Zn) by the flame atomic absorption spectrophotometer (FAAS), in the muscle tissues, exoskeletons, and gills from freshwater prawn (Macrobrachium rosenbergii) (n = 20) harvested from natural habitat in Kerang River, Malaysia on 25th November 2015. Significant increase of the metals level in muscle tissue and gill (r > 0.70, p 
    Matched MeSH terms: Spectrophotometry, Atomic
  13. Verifying measurements of residual calcium content in demineralised cortical bone
    Ariffin AF, Yusof N, Mohd S, Rahman SA, Ramalingam S, Mansor A, et al.
    Cell Tissue Bank, 2019 Dec;20(4):527-534.
    PMID: 31456097 DOI: 10.1007/s10561-019-09785-4
    Calcium contents of demineralised human cortical bone determined by titrimetric assay and atomic absorption spectrophotometry technique were verified by comparing to neutron activation analysis which has high recovery of more than 90%. Conversion factors determined from the comparison is necessary to correct the calcium content for each technique. Femurs from cadaveric donors were cut into cortical rings and demineralised in 0.5 M hydrochloric acid for varying immersion times. Initial calcium content in the cortical bone measured by titration was 4.57%, only 21% of the measurement by neutron activation analysis; while measured by atomic absorption spectrophotometer was 13.4%, only 61% of neutron activation analysis. By comparing more readings with the measurements by neutron activation analysis with 93% recovery, a conversion factor of 4.83 was verified and applied for the readings by titration and 1.45 for atomic absorption spectrophotometer in calculating the correct calcium contents. The residual calcium content started to reduce after the cortical bone was demineralised in hydrochloric acid for 8 h and reduced to 13% after 24 h. Using the linear relationship, the residual calcium content could be reduced to less than 8% after immersion in hydrochloric acid for 40 h. Atomic absorption spectrophotometry technique is the method of choice for calcium content determination as it is more reliable compared to titrimetric assay.
    Matched MeSH terms: Spectrophotometry, Atomic
  14. Physicochemical Properties, Minerals, Trace Elements, and Heavy Metals in Honey of Different Origins: A Comprehensive Review
    Solayman M, Islam MA, Paul S, Ali Y, Khalil MI, Alam N, et al.
    Compr Rev Food Sci Food Saf, 2016 Jan;15(1):219-233.
    PMID: 33371579 DOI: 10.1111/1541-4337.12182
    Honey is a popular natural food product with a very complex composition mainly consisting of both organic and inorganic constituents. The composition of honey is strongly influenced by both natural and anthropogenic factors, which vary based on its botanical and geographical origins. Although minerals and heavy metals are minor constituents of honey, they play vital role in determining its quality. There are several different analytical methods used to determine the chemical elements in honey. These methods are typically based on spectroscopy or spectrometry techniques (including atomic absorption spectrometry, atomic emission spectrometry, inductively coupled plasma mass spectrometry, and inductively coupled plasma optical emission spectrometry). This review compiles available scientific information on minerals and heavy metals in honey reported from all over the world. To date, 54 chemical elements in various types of honey have been identified and can be divided into 3 groups: major or macroelements (Na, K, Ca, Mg, P, S, Cl), minor or trace elements (Al, Cu, Pb, Zn, Mn, Cd, Tl, Co, Ni, Rb, Ba, Be, Bi, U, V, Fe, Pt, Pd, Te, Hf, Mo, Sn, Sb, La, I, Sm, Tb, Dy, Sd, Th, Pr, Nd, Tm, Yb, Lu, Gd, Ho, Er, Ce, Cr, As, B, Br, Cd, Hg, Se, Sr), and heavy metals (trace elements that have a specific gravity at least 5 times higher than that of water and inorganic sources). Chemical elements in honey samples throughout the world vary in terms of concentrations and are also influenced by environmental pollution.
    Matched MeSH terms: Spectrophotometry, Atomic
  15. Fulltext Differentiation of ripe and unripe fruit flour using mineral composition data-Statistical assessment
    Alkarkhi AFM, Alqaraghuli WAA, Mohamed Zam NR, Manan DMA, Mahmud MN, Huda N
    Data Brief, 2020 Jun;30:105414.
    PMID: 32258278 DOI: 10.1016/j.dib.2020.105414
    Data on the mineral composition and content of one heavy metal measured in three different fruit flours prepared from ripe and unripe fruits (pulp and peel) are presented. The mineral composition (sodium (Na), potassium (K), magnesium (Mg), calcium (Ca), zinc (Zn), copper (Cu), iron (Fe) and manganese (Mn)) and content of one heavy metal (lead (Pb)) of the flours were analyzed by atomic absorption spectrophotometry. The analysis showed that the data can be used for differentiation between different fruits and stages of ripeness, as revealed by discriminant analysis and cluster analysis. The data provided can be used by researchers and scientists in the differentiation of fruits based on major and minor mineral elements.
    Matched MeSH terms: Spectrophotometry, Atomic
  16. Fulltext Dataset on leaching properties of coal ashes from Malaysian coal power plant
    Beddu S, Abd Manan TSB, Zainoodin MM, Khan T, Wan Mohtar WHM, Nurika O, et al.
    Data Brief, 2020 Aug;31:105843.
    PMID: 32596432 DOI: 10.1016/j.dib.2020.105843
    Coal combustion by-products (CCPs) (i.e. fly (FA) and bottom (BA) ashes) generated by power plants contain heavy metals. This research presents leaching properties of coal ashes (FA and BA) collected from Jimah coal-fired power station, Port Dickson, Negeri Sembilan using USEPA standard methods namely toxicity characteristic leaching procedure (TCLP), and synthetic precipitation leaching procedure (SPLP). Heavy metals like lead (Pb), zinc (Zn), copper (Cu) and arsenic (As) were quantified using atomic absorption spectrometer (AAS). The leached of heavy metals fluxes were Cu < Zn < Pb < As. As leached the most whilst indicating of possible contamination from As. Overall, the ranges of leached concentration were adhered to permissible limits of hazardous waste criteria for metal (Pb and As) and industrial effluent (Zn and Cu). The presented data has potential reuse as reference for the coal ash concrete mixed design application in construction industries.
    Matched MeSH terms: Spectrophotometry, Atomic
  17. Fulltext Mercury concentration data from Matang Mangrove Forest Reserve, Malaysia
    Wolswijk G, Satyanarayana B, Le QD, Siau YF, Ali ANB, Saliu IS, et al.
    Data Brief, 2020 Apr;29:105134.
    PMID: 32016142 DOI: 10.1016/j.dib.2020.105134
    This paper presents the results of mercury analysis on 786 abiotic (surface sediments) and biotic (plant and animal tissues) samples collected from 10 sites at Matang Mangrove Forest Reserve in Peninsular Malaysia. Sediment samples were collected at the surface level from both river bank and forest understory. Whereas plant tissues obtained from Rhizophora apiculata Blume and Rhizophora mucronata L. consisted of leaves (in four stages namely young, mature, senescent and decomposing), bark and roots (divided into xylem, cortex and epidermis), the animal samples were represented by muscle tissue of the gastropod Cassidula aurisfelis Bruguière and the cockle Tegillarca granosa L. The mercury concentration measurements were obtained through a cold vapor atomic absorption spectrometer. The core data have been analysed and interpreted in the paper "Distribution of mercury in sediments, plant and animal tissues in Matang Mangrove Forest Reserve, Malaysia" [1].
    Matched MeSH terms: Spectrophotometry, Atomic
  18. In vivo study on the release of nickel, chromium, and zinc in saliva and serum from patients treated with fixed orthodontic appliances
    Quadras DD, Nayak USK, Kumari NS, Priyadarshini HR, Gowda S, Fernandes B
    Dent Res J (Isfahan), 2019 7 16;16(4):209-215.
    PMID: 31303873
    Background: Fixed orthodontic appliances can release metal ions such as nickel, chromium, and zinc into saliva and blood, which can cause contact dermatitis, hypersensitivity, and cytotoxicity. This study was undertaken to assess the release of nickel, chromium, and zinc in saliva and serum of patients undergoing fixed orthodontic treatment.

    Materials and Methods: This in vivo study was conducted on 80 participants with an age range of 15-40 years. Thirty were included as controls and 50 participants were treated with fixed orthodontic appliances. Saliva and blood samples were collected at five different periods, before insertion of fixed orthodontic appliance and at 1 week, 3 months, 1 year, and 1.5 years after insertion of appliance, respectively. The metal ion content in the samples were analyzed by atomic absorption spectrophotometry. Mean levels of nickel, chromium, and zinc in saliva and serum were compared between groups using independent sample t-test and before and after results using paired t-test. P < 0.05 was considered as statistically significant.

    Results: At the end of 1.5 years, the mean salivary levels of nickel, chromium, and zinc in controls were 5.02 ppb, 1.27 ppb, and 10.24 ppb, respectively, as compared to 67 ppb, 30.8 ppb, and 164.7 ppb at the end of 1.5 years. This was statistically significant with P < 0.001. A significant increase in the metal ion levels were seen in participants with before and after insertion of appliance (P < 0.001).

    Conclusion: Orthodontic appliances do release considerable amounts of metal ions such as nickel, chromium, and zinc in saliva and serum. However, it was within permissible levels and did not reach toxic levels.

    Matched MeSH terms: Spectrophotometry, Atomic
  19. Geo-accumulation index and contamination factors of heavy metals (Zn and Pb) in urban river sediment
    Haris H, Looi LJ, Aris AZ, Mokhtar NF, Ayob NAA, Yusoff FM, et al.
    Environ Geochem Health, 2017 Dec;39(6):1259-1271.
    PMID: 28484873 DOI: 10.1007/s10653-017-9971-0
    The aim of the present study was to appraise the levels of heavy metal contamination (Zn and Pb) in sediment of the Langat River (Selangor, Malaysia). Samples were collected randomly from 15 sampling stations located along the Langat River. The parameters measured were pH, redox potential, salinity, electrical conductivity, loss of ignition, cation exchanges capacity (Na, Mg, Ca, K), and metal ions (Zn and Pb). The geo-accumulation index (I geo) and contamination factor (C f) were applied to determine and classify the magnitude of heavy metal pollution in this urban river sediment. Results revealed that the I geo of Pb indicated unpolluted to moderately polluted sediment at most of the sampling stations, whereas Zn was considered to be within background concentration. The I geo results were refined by the C f values, which showed Pb with very high C f at 12 stations. Zinc, on the other hand, had low to moderate C f values. These findings indicated that the sediment of the Langat River is severely polluted with Pb. The Zn concentration at most sampling points was well below most sediment quality guidelines. However, 40% of the sampling points were found to have a Pb concentration higher than the consensus-based probable effect concentration of 128 mg/kg (concentrations above this value are likely to cause harmful effects). This result not only highlights the severity of Pb pollution in the sediment of the Langat River, but also the potential risk it poses to the environment.
    Matched MeSH terms: Spectrophotometry, Atomic
  20. Toxic heavy metal (Pb and Cd) content in tobacco cigarette brands in Selangor state, Peninsular Malaysia
    Janaydeh M, Ismail A, Zulkifli SZ, Omar H
    Environ Monit Assess, 2019 Sep 16;191(10):637.
    PMID: 31529162 DOI: 10.1007/s10661-019-7755-y
    Cadmium (Cd) and lead (Pb) are ubiquitous metals widely distributed in the environment, resulting in toxic health effects. This project aims to evaluate Pb and Cd as toxic elements in 15 different tobacco cigarette brands produced and/or sold in Selangor state, Peninsular Malaysia. The concentrations of Pb and Cd in all tobacco brands tested in this study were determined using the air-acetylene flame atomic absorption spectrophotometer (AAS). On average, the concentrations of Pb and Cd in different tobacco brand samples ranged from 3.05 and 0.80 μg/g dw, respectively. The results indicate that assessment mean values of Pb inhaled from smoking one packet of 20 cigarettes were in the range of 1.55-3.51 μg. Furthermore, the concentration of Cd inhaled per packet of cigarettes (20 sticks) is estimated to be 0.04-0.36 μg. However, there was a significant difference in the concentrations of Pb and Cd between the different brands of tobacco cigarettes, among cigarette prices (cheap versus expensive) of tobacco brands. In conclusion, cigarette smokers in Selangor, Malaysia, are heavily exposed to Pb and Cd, and such exposure could adversely affect their health in the long term. The impact of toxic heavy metals on smokers in this state would be an area for future research.
    Matched MeSH terms: Spectrophotometry, Atomic
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links