Stichopus horrens flesh was explored as a potential source for generating peptides with angiotensin-converting enzyme (ACE) inhibitory capacity using 6 proteases, namely alcalase, flavourzyme, trypsin, papain, bromelain, and protamex. Degree of hydrolysis (DH) and peptide profiling (SDS-PAGE) of Stichopus horrens hydrolysates (SHHs) was also assessed. Alcalase hydrolysate showed the highest DH value (39.8%) followed by flavourzyme hydrolysate (32.7%). Overall, alcalase hydrolysate exhibited the highest ACE inhibitory activity (IC(50) value of 0.41 mg/mL) followed by flavourzyme hydrolysate (IC(50) value of 2.24 mg/mL), trypsin hydrolysate (IC(50) value of 2.28 mg/mL), papain hydrolysate (IC(50) value of 2.48 mg/mL), bromelain hydrolysate (IC(50) value of 4.21 mg/mL), and protamex hydrolysate (IC(50) value of 6.38 mg/mL). The SDS-PAGE results showed that alcalase hydrolysate represented a unique pattern compared to others, which yielded potent ACE inhibitory peptides with molecular weight distribution lower than 20 kDa. The evaluation of the relationship between DH and IC(50) values of alcalase and flavourzyme hydrolysates revealed that the trend between those parameters was related to the type of the protease used. We concluded that the tested SHHs would be used as a potential source of functional ACE inhibitory peptides for physiological benefits.
Application of non-thermal treatment to proteins prior to enzymatic hydrolysis can facilitate the release of novel bioactive peptides (BPs) with unique biological activities. In this study, lupin protein isolate was pre-treated with ultrasound and hydrolysed using alcalase and flavourzyme to produce alcalase hydrolysate (ACT) and flavourzyme hydrolysate(FCT). These hydrolysates were fractionated into 1, 5, and 10 kDa molecular weight fractions using a membrane ultrafiltration technique. The in vitro angiotensin-converting enzyme (ACE) studies revealed that unfractionated ACT (IC50 = 3.21 mg mL-1) and FCT (IC50 = 3.32 mg mL-1) were more active inhibitors of ACE in comparison to their ultrafiltrated fractions with IC50 values ranging from 6.09 to 7.45 mg mL-1. Molecular docking analysis predicted three unique peptides from ACT (AIPPGIPY, SVPGCT, and QGAGG) and FCT (AIPINNPGKL, SGNQGP, and PPGIP) as potential ACE inhibitors. Thus, unique BPs with ACE inhibitory effects might be generated from ultrasonicated lupin protein.
As a protein-rich, underutilized crop, green soybean could be exploited to produce hydrolysates containing angiotensin-I converting enzyme (ACE) inhibitory peptides. Defatted green soybean was hydrolyzed using four different food-grade proteases (Alcalase, Papain, Flavourzyme and Bromelain) and their ACE inhibitory activities were evaluated. The Alcalase-generated green soybean hydrolysate showed the highest ACE inhibitory activity (IC50: 0.14 mg/mL at 6 h hydrolysis time) followed by Papain (IC50: 0.20 mg/mL at 5 h hydrolysis time), Bromelain (IC50: 0.36 mg/mL at 6 h hydrolysis time) and Flavourzyme (IC50: 1.14 mg/mL at 6 h hydrolysis time) hydrolysates. The Alcalase-generated hydrolysate was profiled based on its hydrophobicity and isoelectric point using reversed phase high performance liquid chromatography (RP-HPLC) and isoelectric point focusing (IEF) fractionators. The Alcalase-generated green soybean hydrolysate comprising of peptides EAQRLLF, PSLRSYLAE, PDRSIHGRQLAE, FITAFR and RGQVLS, revealed the highest ACE inhibitory activity of 94.19%, 99.31%, 92.92%, 101.51% and 90.40%, respectively, while their IC50 values were 878 μM, 532 μM, 1552 μM, 1342 μM and 993 μM, respectively. It can be concluded that Alcalase-digested green soybean hydrolysates could be exploited as a source of peptides to be incorporated into functional foods with antihypertensive activity.
Background: Currently, there is a lack of information on the comparative efficacy and safety of non-statin lipid-lowering agents (NST) in cardiovascular (CV) disease risk reduction when added to background statin therapy (ST). This study determine the relative treatment effects of NST on fatal and non-fatal CV events among statin-treated patients. Methods: A network meta-analysis based on a systematic review of randomized controlled trials (RCTs) comparing non-statin lipid-modifying agents among statin-treated patients was performed. PubMed, EMBASE, CENTRAL, and Clinicaltrial.gov were searched up to April 10, 2018. The primary outcomes were CV and all-cause mortalities. Secondary CV outcomes were coronary heart disease (CHD) death, non-fatal myocardial infarction (MI), any stroke, and coronary revascularization. Risks of discontinuations were secondary safety outcomes. Results: Sixty-seven RCTs including 259,429 participants with eight interventions were analyzed. No intervention had significant effects on the primary outcomes (CV mortality and all-cause mortality). For secondary endpoints, proprotein convertase subtilisin/kexin type 9 inhibitor (PCSK) plus statin (PCSK/ST) significantly reduced the risk of non-fatal MI (RR 0.82, 95% CI 0.72-0.93, p = 0.003), stroke (RR 0.74, 95% CI 0.65-0.85, p < 0.001), coronary revascularization (RR 0.84, 95% CI 0.75-0.94, p = 0.003) compared to ST. Combinations of ST and all NST except PCSK and ezetimibe showed higher rate of discontinuation due to adverse events compared to ST. Conclusions: None of NST significantly reduced CV or all-cause death when added to ST. PCSKs and to a lesser extent, ezetimibe may help reduce cardiovascular events with acceptable tolerability profile among broad range of patients.
Chicken skin gelatin hydrolysates and peptides with angiotensin converting enzyme inhibitory (ACEI) activity were produced enzymatically using alcalase, pronase E, and collagenase before fractionation into
This study aims to determine the combined effects of hydrolysis time, temperature, pH and ratio of enzyme to substrate on the degree of hydrolysis (DH) of silver catfish frame using Response Surface Methodology. The proximate compositions of silver catfish frame and silver catfish hydrolysate powder were determined as well. The effects of independent factors were described using a three-level factors Face Centered Central Composite design. The suggested hydrolysis conditions for obtaining the optimum DH using Alcalase® were – temperature of 55oC, hydrolysis time of 163 min, pH of substrate at 9.45 and an enzyme concentration of 2.0%. The generated model showed a quadratic fit with experimental data. Proximate analyses revealed that silver catfish frame contained 25.02% protein, 68.21% fat and 7.08% ash. While silver catfish frame hydrolysate powder contained 65.05% protein, 32.92% fat and 0.86% ash. The protein recovery in silver catfish frame hydrolysate was as high as 71.6%.
Utilization of palm kernel expeller (PKE), a palm oil milling by-product, may be diversified through the exploitation of its protein component. The PKE protein could be effectively extracted using an alkaline
solution and followed by enzymatic hydrolysis to produce PKE protein hydrolysates or crude PKE peptide. The extraction of PKE protein was successfully carried out using an alkaline solution at pH11, at ratio of 1:10 (g/ml), PKE powder to alkaline solution with continuous shaking, 150 rpm, in a water bath operating at 50°C for 30 min. The extracted protein powder (PKEP) had 68.50±3.08% crude protein, 0.54±0.03% fat and 0.73±0.02% ash. The freeze-dried PKEP was re-suspend in particular buffer and hydrolyzed with proteolytic enzymes (Alcalase® 2.4L, Flavourzyme® 500MG, pepsin or trypsin) to obtain PKEP hydrolysate (PKEPH). The effect of enzyme concentration (0, 2, 4, 6, 8 & 10%) and time of hydrolysis (0, 6, 12, 24, 48 h) was studied to determine the most efficient hydrolytic conditions. Results showed that all enzymes tested were capable of hydrolyzing the PKEP and producing hydrolysates with different degree of hydrolysis (DH%). At 8.0% concentration, Alcalase®2.4L hydrolyzed PKEP into the highest DH (75.96%) hydrolysate (PKEPH) after 1h hydrolysis. Although only with 2.0% Alcalase 2.4 L concentration, it was sufficient to produce PKEP hydrolysate of 81.35% DH %, but it required 12 h to hydrolyze the protein. Pepsin was relatively the least efficient protease to hydrolyze the PKEP.
Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.
Green mussel (Perna viridis) was hydrolysed with alcalase under two different conditions consisting of pH7, E/S5% or pH 9, E/S 3% at 60°C for two hours. Hydrolysis at pH 9, E/S3% resulted in a higher degree of hydrolysis (DH) than pH7, E/S5% with degree of hydrolysis of 37.00% and 28.33%, respectively. The green mussel hydrolysates were characterized by molecular weight of
Threadfin bream (Nemipterus japonicas) muscle was hydrolysed using protease extracted from
bilimbi (Averrhoa bilimbi L.) fruit. This study was performed in order to compare the efficiency of bilimbi protease in producing threadfin bream protein hydrolysate with the commercial protease; alcalase 2.4 L. Initially, protease was extracted and then purified using 40% ammonium sulfate precipitation method. The proteolytic activity of the crude extract and purified protease was determined. Precipitation using 40% ammonium sulfate resulted in bilimbi protease specific activity of 2.36 U/mg and 23.13% recovery. Threadfin bream hydrolysate was prepared based on the pH-stat method by hydrolysis for 2 hrs. Hydrolysis using bilimbi protease produced 34.76% degree of hydrolysis (DH) and 3.75% yield while hydrolysis using alcalase resulted in 86.6% DH with 22.78% yield. Alcalase hydrolysate showed higher solubility than bilimbi protease hydrolysate at pH 7 with 70.87 and 32.16% solubility, respectively. Results also showed that protein content of threadfin bream hydrolysate produced using alcalase was higher (86.86%) than those produced using bilimbi protease (22.12%). However, both hydrolysates showed low moisture content between 3.93 to 7.00%. The molecular weight distribution analysis using SDS–PAGE indicated the distribution of smaller peptides especially in alcalase hydrolysate. Overall, the results showed that alcalase is more efficient enzyme choice than bilimbi protease for preparing threadfin bream hydrolysates. However, both hydrolysates could play an important role thus contribute to the food industry.
The physicochemical properties of silver catfish frame hydrolysate powder at three different degree of hydrolysis, DH43%, DH 55% and DH 68% were studied. The hydrolysates powder were obtained by hydrolysis using Alcalase®, centrifugation and spray drying of the supernatant. The study found that preparation of these hydrolysates affected the protein, ash and fat content as well as amino acid composition. As for essential amino acids, their values were generally considered as adequate as compared to the suggested essential amino acids profile of FAO/WHO. The results showed that SFHs were rich in lysine and glutamate. Hydrolysate at DH 68% exhibited better peptide solubility and water holding capacity. As degree of hydrolysis increased, emulsifying capacity and foaming capacity of the hydrolysate decreased. It was also found that the lightness in hydrolysate powder decreased with increase in degree of hydrolysis. This study shows that silver catfish frame hydrolysate has good solubility, good foaming properties and light colour profile, thus having high potential as food ingredient.
Enzymatic hydrolysis of proteins is an important bioprocess method to prepare bioactive peptides with many functionality and health benefits. The aims of the present work were to prepare and determine the physicochemical characteristics of gelatine hydrolysate from skin of shortfin scad (SSGH) via hydrolysis using alcalase. Analyses on chemical composition, molecular weight by SDS PAGE, protein concentration, amino acid composition, Fourier Transform Infrared Spectroscopic features, and solubility of SSGH were thus performed. The yield of SSGH obtained was 51.01% (d.b.). The chemical compositions of SSGH for moisture, protein, fat, and ash were 13.82%, 90.05%, 1.95%, and 12.48%, respectively. SSGH showed low molecular weight (
The study aims to determine the optimized condition of eel protein hydrolysate (EPH)
produced using alcalase. The proximate compositions of eel flesh were determined as well.
Enzymatic hydrolysis conditions were optimized using response surface methodology (RSM)
by applying four factors, 3-levels Central Composite Design (CCD) with six centre points. The
model equation was proposed with regards to the time (60min, 120min, 180min), temperature
(40°C, 50°C, 60°C), pH (7, 8, 9) and enzyme concentration (1%, 2%, 3%). The optimum of
hydrolysis condition that be suggested to obtain the optimum yield, degree of hydrolysis (DH)
and antioxidant activity were 84.02 min, 50.18°C, pH 7.89 and 2.26% [enzyme]. The predicted
response values using quadratic model were 10.03% for yield, 83.23% for DH and 89.24%
for antioxidant activity. The chemical composition determination showed that the protein
content increased by more than 5-fold (16.88% to 98.53%) while the fat content was decreased
by 96.48% after hydrolysis. Hydrolysis process had significantly increased the amount of
both hydrophilic (serine and threonine) and hydrophobic amino acids (valine, isoleucine,
phenylalanine, methionine) which contributed to the antioxidant activity of hydrolyzed eel
protein. The enzymatic hydrolysis of eel protein had improved the protein content of EPH with
potential as new natural antioxidant.
The effect of degree of hydrolysis (DH) on the physicochemical properties of cobia frame hydrolysate was determined. Three levels of degree of hydrolysis of cobia frame hydrolysate were studied, which were 53%, 71% and 96%. After enzymatic hydrolysis using Alcalase®, the samples were spray-dried. Cobia hydrolysate powder samples were analyzed for their proximate analysis and physicochemical properties. The proximate analysis showed significant differences in fat and ash content only. DH96 hydrolysate showed desirable essential amino acid profile for human requirement except for methionine and isoleucine. The study found that cobia frame hydrolysate had good colour, emulsifying capacity and excellent foaming properties. However, there were no significant differences in water-holding capacity, oil-holding capacity and peptide solubility among the hydrolysate samples. This study suggested that cobia frame hydrolysate is a potential ingredient and foaming agent for food industry.
The amino-acid composition, 2, 2-Diphenyl-1-picryhydrazyl (DPPH) radical-scavenging activity, and peptide patterns of tilapia protein hydrolysates produced by the enzymatic hydrolysis of Alcalase (AH), Flavourzyme (FH) and Protamex (PH) for 5h using pH-stat method were studied. The ratio of essential amino acids to non-essential amino acids increased after hydrolysis in all samples; however, no significant differences among them were observed. AH had a highest (P < 0.05) DPPH radical-scavenging activity, but no significant difference in the DPPH between FH and PH was observed. SDS-PAGE patterns for all the hydrolysates showed significant (P < 0.05) reduction in the number and the intensity of the bands with increasing time of hydrolysis. Flavourzyme showed the lowest rate of hydrolytic activity towards the tilapia mince.
The enzymatic hydrolysis of lead tree seed protein with alcalase to obtain Lead Tree Seed Hydrosylate (LTSH) was optimized using response surface methodology (RSM). A three- tiered, factor face centered, central composite design (CCD) was used to study the influence of four independent variables namely: pH (7–9); hydrolysis temperature (50oC, 55oC, 60oC); hydrolysis time (30 min, 60 min, 90 min); and enzyme/substrate (1%, 2%, 3%) ratio on both yield and antioxidant activity. The CCD consisted of twenty-four experimental points and six replicates of central points. All data were analyzed using Design-Expert Software. The optimum conditions obtained from experiments were a pH of 9; an enzyme to substrate ratio of 2%; a hydrolysis time of 90 min; and a temperature of 55°C. Results showed that LTSH derived from optimized hydrolysis exhibited effective ferrous ion chelating activity (92.79%) and strong reducing power (A700 = 3.82) at a concentration of 20 mg/ml. LTSH also demonstrated high DPPH radical scavenging activity (76.21%; IC50 1.99 mg/ml), as well as hydroxyl radical scavenging activity (66.72%; IC50 2.45 mg/ml). Superoxide anion scavenging activity was 55.71% (IC50 3.89 mg/ml) at 20 mg/ml. These results suggest that LTSH has potential as a natural antioxidant of functional food and for use in food processing.
Physicochemical properties of mud clam (Polymesoda erosa) hydrolysate produced using two microbial enzymes; alcalase and flavourzyme were determined. Hydrolysis using alcalase at 20.28% degree of hydrolysis (DH) resulted in 25.06 % yield and 45.37% protein while flavourzyme hydrolysis showed 22.93 % DH, 46.67 % protein and 30.68 % yield. Both hydrolysates were yellowish. Better emulsifying properties, foaming properties and water and oil holding capacity were exhibited by flavourzyme hydrolysate compared to the alcalase hydrolysate. However, in terms of amino acid composition, alcalase hydrolysate contained higher amino acid composition (75.06%) than flavourzyme hydrolysate (62.37%). The study suggested that mud clam hydrolysate had the potential to be used in food formulations for human consumption.
Fish protein hydrolysate was recovered from tilapia by-product (TB) through enzymatic hydrolysis using alcalase enzyme. Hydrolysis reaction of TB was monitored according to the degree of hydrolysis (DH) by employing O-phtaldialdehyde (OPA) method. Optimization process for obtaining high yield of TB protein hydrolysate was performed using response surface methodology (RSM) by optimizing a combination of four independent variables namely, pH (6.5-8.5), temperature (55-70oC), substrate concentration (10-17.5% w/v), and enzyme concentration (1.5-3.5% w/w) with (DH) as a response. The optimum enzymatic hydrolysis conditions were obtained at pH 7.5, temperature of 60oC, substrate concentration of 15% (w/v) and 2.5% (w/w) of enzyme concentration and yielded about 20.20% of DH after hydrolyzing for 120 min. RSM generated model predicted that 20.42% of DH could be achieved at these conditions and this model was valid based on the DH value obtained from the experimental study (20.31%) which was quite similar with the predicted value. High yield of DH obtained from the optimization process could produce fish protein hydrolysate with good nutritional and functional properties.
Bioactive edible swiftlet's nest (ESN) sialylated-mucin (SiaMuc) hydrolysate is produced by alcalase hydrolysis. Enzymatic hydrolysis of ESN breakdown high-valued ESN SiaMuc-glycoprotein into bioactive SiaMuc-glycopeptide. This is a breakthrough for the issue of insolubility and low extraction rate in ESN, and even increases the bioavailability of ESN nutritional functionality and health benefits. Hydrolysis of ESN SiaMuc-glycoprotein was performed for 1 to 4 h and its effect on physicochemical properties, molecular weight (MW) distribution, SiaMuc-glycoprotein and glycopeptide integrity were determined. Other than improvement in solubility and bioavailability as SiaMuc-glycopeptide, results from SDS-PAGE revealed that MW of SiaMuc-glycoprotein decreased from 42.0-148.8 kDa to 17.7-142.7 kDa with increasing hydrolysis period. Further hydrolysis from maximized DH (90 min) showed an insignificant effect on the MW of ESN SiaMuc-glycopeptide and remained constant at 15.2 kDa. This highlights that enzymatic hydrolysis only influences macro SiaMuc-glycoprotein fractions (142.7, 115.3 and 102.7 kDa), while the majority of SiaMuc-glycopeptide fractions from 36.6-98.6 kDa remained intact. Conclusively, alcalase hydrolysis of ESN showed high recovery in the form of bioactive ESN SiaMuc-glycopeptide. Therefore, enzymatic biotechnology is an economic alternative applicable on ESN that broaden industrial utilization by reducing the MW without destroying the quality of bioactive SiaMuc-glycoprotein.
We recently described the production of a detergent-biocompatible crude protease from Streptomyces mutabilis strain TN-X30. Here, we describe the purification, characterization, and immobilization of the serine alkaline protease (named SPSM), as well as the cloning, sequencing, and over-expression of its corresponding gene (spSM). Pure enzyme was obtained after ammonium sulphate precipitation followed by heat-treatment and Sephacryl® S-200 column purification. The sequence of the first 26 NH2-terminal residues of SPSM showed a high sequence identity to subtilisin-like serine proteases produced by actinobacteria. The spSM gene was heterologously expressed in Escherichia coli BL21(DE3)pLysS and E. coli BL21-AI™ strains using pTrc99A (rSPSM) and Gateway™ pDEST™ 17 [(His)6-tagged SPSM] vectors, respectively. Results obtained indicated that the (His)6-tagged SPSM showed the highest stability. The SPSM was immobilized using encapsulation and adsorption-encapsulation approaches and three different carriers. Features of SPSM in soluble and immobilized forms were analyzed by Fourier transform infrared (FTIR) spectroscopy in attenuated total reflection (ATR) mode, X-ray diffraction (XRD), zeta potential measurements, and field emission scanning electron microscopy (FE-SEM). The white clay and kaolin used in this study are eco-friendly binders to alginate-SPSM and show great potential for application of the immobilized SPSM in various industries. Molecular modeling and docking of N-succinyl-l-Phe-l-Ala-l-Ala-l-Phe-p-nitroanilide in the active site of SPSM revealed the involvement of 21 amino acids in substrate binding.