Okra plant particularly its fruit is highly mucilage which composed of pectin and high content of carbohydrate. Byproducts of okra plant such as leaves and matured fruits will be discarded whenever the young fruits are harvested which eventually leads to environmental pollution. Those byproducts have potential to become plant-based alternative for bovine and pork related gelatin. This study aimed to determine the gel formation of pectin extracted from okra plant byproducts particularly the leaves, pulp (skin without seeds) and seeds. Pectin was extracted using a sequential extraction with the applications of hot buffer (HB) and hot buffer with chelating agents (CH). CH extraction gave the highest pectin yield (>40%) compared to HB and DA. The HB fraction harbored highly purified pectin due to high anhydro uronic acid content and degree of esterification. The highest pectin yield was extracted from seeds with an overall fraction yield of 86%, followed by the leaves (75%) and pulp (71%). The pectin was blended with konjac glucomannan (KG) in 5.0:1.6 ratio to form gel and stored for 16 - 18hr at 4°C ± 1.0. The gel formed using HB extraction was found to have significantly lower (p < 0.05) gel strength than HB with CH extraction. This study concluded that HB and CH pectin extracts derived from okra leaves, pulp and seeds have good potential to become gelling agent.
The present work assessed the effect of solid-state fermentation (SSF) and drying methods [hot air drying (HAD) and hot air drying assisted by microwave finish drying (MFD)] on the physicochemical, functional and gelatinisation properties of flours of Nangka and Tanduk plantain cultivars. Drying methods and SSF did not affect the fat, dietary fibre and carbohydrate contents of the plantain flours. However, both treatments significantly affected the pH and titratable acidity of the flours. In addition, SSF coupled with MFD significantly increased the water absorption and oil absorption capacities of the flours more than the flours obtained from the hot air drying. Similar trend was observed with the swelling characteristics of the flours. Fermented and MFD flours had higher swelling power than flours obtained by hot air drying. Optical microscopy revealed that drying methods employed in the present work did not significantly alter the starch granules birefringence of the plantains.
Foodborne disease has been associated with microorganisms like bacteria, fungi, viruses and parasites. Most commonly, the outbreaks take place due to the ingestion of pathogenic bacteria like Salmonella Typhi, Escherichia coli, Staphylococcus aureus, Vibrio cholera, Campylobacter jejuni, and Listeria monocytogenes. The disease usually happens as a result of toxin secretion of the microorganisms in the intestinal tract of the infected person. Usually, the level of hygiene in the food premises reflect the quality of the food item, hence restaurant or stall with poor sanitary condition is said to be the contributor to food poisoning outbreak. In Malaysia, food poisoning cases are not rare because the hot and humid climate of this country is very suitable for the growth of the foodborne bacteria. The government is also implementing strict rules to ensure workers and owners of food premises prioritize the cleanliness of their working area. Training programme for food handlers can also help them to implement hygiene as a routine in a daily basis. A lot of studies have been done to reduce foodborne diseases. The results can give information about the types of microorganisms, and other components that affect their growth. The result is crucial to determine how the spread of foodborne bacteria can be controlled safely and the outbreak can be reduced.
Biodegradable packaging, such as edible coatings and films, is widely used because it is free
from synthetic substances and does not lead to environment pollution. Therefore, this industry
is continuously growing. This study aimed to prepare and characterize biodegradable films
loaded with nano kaolin. Semolina protein films were prepared and plasticized with sorbitol/
glycerol by the casting method. Nano kaolin with 0%, 1%, 2%, 3%, 4% and 5% (w/w) was
added to the films before casting them. The films were dried at controlled conditions. The effects
of the addition of nanoparticles were measured on water absorption capacity (WAC), density,
ultraviolet transmittance, heat sealability, and film morphology. Results showed that the WAC
and density of the films decreased by increasing the nano kaolin concentration. By contrast, the
seal strength for the semolina film was increased by incorporating a low percentage of nano
kaolin. The X-ray diffraction curves of the semolina film incorporated with kaolin exhibited
broad reflection, thus indicating that the kaolin nanosize matches the transmission electron
microscopy images. In summary, nano kaolin incorporation enhanced the physicochemical
properties and heat sealability of semolina films, thereby indicating the potential application of
these bionanocomposites to food-product packaging.
Extensive use of synthetic-based polymer plastic as packaging medium to pack food products has led to serious environmental problems due to their total non-biodegradability property. The stability of nutritional composition and physical traits of chicken patties containing oyster mushroom packed with biodegradable and non-degradable packaging materials were studied. The chicken patties containing oyster mushroom were packed with either biodegradable plastic (BP), paper box (PB) or non-biodegradable high density polyethylene (HDPE). Generally, there were no significant (P>0.05) different in all nutrient analyzed except for carbohydrate after 6 months of storage for chicken patties packed with different types of packaging. The chicken burger packed with both BP and PB packagings were able to retain the moisture and fat without jeopardizing the diameter reduction and cooking yield during storage. There were no differences in all nutrient analyzed after 6 months of storage of chicken patties packed with either biodegradable packagings (BP and PB) or non-degradable packaging. In addition, frozen storage does not significantly affect the concentration of of β-glucan in both BP and PB packagings. In summary, these results indicate that biodegradable packagings applied in packing chicken patty frozen for 6 months were effective in controlling the microbial growth and provide wholesomeness and safety to the chicken patty containing oyster mushroom.
The impacts on both rheological parameters; Casson yield stress and Casson viscosity were determined. The interactions among blend’s components; xanthan gum (XG), corn starch (CS), glycerin (GL) and their relationship with both flow parameters were also investigated by using D-Optimal mixture design. Three levels of cocoa butter substitution assigned in chocolate production were at 5%, 10% and 15% level with random proportions of each component generated by Design Expert software. An appropriate mathematical model was applied to evaluate each response as a function of the proportions of the components enabling in prediction of future response by using any blend of components. As the incorporation of the blends (XG/CS/GL) in chocolate production was elevated from 5% to 15%, both parameters; viscosity and yield stress of chocolate were gradually increased, as in range 7.819 to 10.529 Pa, and 2.372 to 3.727 Pa.s, respectively. Neither binary nor ternary component-component interaction exhibited synergistic effect. Nevertheless, strongest antagonistic effect on both rheological parameters of substituted chocolate at 5% level and 10% level were respectively observed at ternary interaction region for the former, and at binary interaction area of CS:GL, closer to CS corner as for the latter. This study somehow provides ideas on how component-component interactions influence experimented response.
This study was carried out to determine recognition threshold and taste preference for three basic tastes (sweetness, saltiness and sourness) based on location (interior and coastal) among the Kadazandusun ethnic in Sabah, Malaysia. One hundred and ninety four (194) volunteers aged 20 to 55 years were selected randomly (stratified) as subject. Three Alternative Forced- Choice (3AFC) and hedonic test were used to determine the taste threshold and preference. The interior group had lower taste threshold for all tastes; sweet (10.97 g/L ± 3.69), salty (1.14 g/L ± 0.38), sour (0.0095 g/L ± 0.011) compared to the coastal group; sweet (11.56 g/L ± 3.71), salty (1.23 g/L ± 0.39), sour (0.0012 g/L ± 0.0034). For intensity and hedonic rating, the patterns of response varied based on location for sweet and sour taste. No significant different (p>0.05) was observed for salty taste. However, both groups preferred the base stimulus which concentration similar to the commercially available products tested. There is a correlation between taste threshold and optimum concentration. Individuals with preferred high taste intensity tend to have higher taste threshold. Location and culture can influenced individual taste preference. However, exposure and experience to taste sensation was the major factor on individual’s taste preference.
Effects of breading materials and deep-fat frying on fat uptake, moisture content and fatty acid composition of the black pomfret (Parastromateus niger) fillets. Black pomfret fillets both breaded and non-breaded were deep-fat fried in sunflower oil and palm olein. Fat uptake, moisture content and fatty acid composition in the fillets were determined. Total fat content in the fillets of both breaded and un-breaded fillets increased significantly (p
Green coffee beans are stored for a certain period and under certain conditions until they are finally utilized. The storage period may depend on customer demand while the storage conditions depend on where the coffee beans are stored. Thus, this research emphasizes the physicochemical changes that occur in Liberica coffee beans during storage under the Malaysian
climate (average temperature and relative humidity of 29.33ºC and 71.75% respectively). The changes in the physico-chemical (coffee size, mass, densities, colour, proximate analysis, sucrose, chlorogenic acid content) and microbiological (yeast and mould count) properties were evaluated during eight months of storage. After the storage, the physical properties of the coffee changed as the coffee beans expanded in size, reduced in mass and density and became brighter in colour. Changes in the chemical properties were also detected where the moisture decreased and the ash content increased. In addition, the sucrose level was found to decrease with a corresponding increase in chlorogenic acid. During storage, the counts of yeast and mould were reduced. Model equations describing the changes in the properties were developed. The overall conclusion was that the coffee beans reduced in quality during storage.
This study was conducted to determine the influence of raw material variation, equipment
process variables and device stability on the drying process of rambutan seed using oven and
microwave drying equipments. The raw material variations studied were skin colour (yellow
and fully red), storage period (fresh and stored) and seed mass (5 and 10 g). The important
equipment process variables studied were oven temperature (40 and 60°C) and microwave
power (250 and 1000 W).The output power and drying distribution in the drying chamber were
studied to examine the device stability. Results indicated that the seed mass, oven temperature
and microwave power influenced the drying time. The skin colour and storage period were
negatively correlated with drying time due to drying time speculate to relay on time required for
moisture removal that associated to initial moisture content and seed mass. It is also observed
that the drying time will be shorten if the sample was located at the central of the microwave
drying chamber. In contrast, the oven exhibited higher stability compared to microwave due
to its ability to provide similar level of heating at each location in the drying chamber. This
information will aid researchers and industrial operators to design an effective drying process
using microwave and oven thus reducing cost and time.
The non-destructive feature of optical techniques has gained interests for quality assessment
of various agricultural produce as well as in food processing technology. The principle and
interaction of light with food and agricultural produce provide essential information for quality
assessment which promotes non-destructive inspection methods. This review encompasses the
determination of optical properties associated with the evaluation of the quality of agricultural
produce. The understanding of how light interacts with turbid agricultural produce is also
presented, including light characteristics such as absorption and scattering. A brief overview of
the estimation and application of the optical parameters in food and agricultural processing are
discussed. The problems and implementation of optical parameters as well as its future trend
are also included.
This paper examines food security determinants among rural farming households in Nigeria. A
total of 3380 households from General Household Survey-panel data that adopt the World Bank
Living Standard Measurement Survey (LSMS) technique was used for this study. The impacts
of household characteristics, household endowments and activity related characteristics were
explored using logistic regression analysis. Based on the Food and Agriculture Organization
FAO recommended minimum 2120 kcal daily per adult equivalent was valued at (N138)
equivalent and USD 0.87 food poverty threshold of per annum was derived for rural Nigeria.
This threshold is the cost for purchasing recommended daily food allowances (RDA) of an
adult equivalent for healthy life in rural Nigeria. The results of the study revealed that age of the
household head, tertiary education, farm size, household size, value of livestock holdings, total
remittances received by the household, participation in nonfarm enterprise and access to formal
credit have significant impact on food security. We conjecture that, the higher incidence of food
security during post harvesting season might likely be due to inability of smallholder farmers
to utilize their extra time into non-farm income generating activities due to high demand for
labour for farm operations.
Due to the latest industrial development, many dangerous chemicals have been released directly or indirectly which resulted in the polluted water bodies. Water rehabilitation is an alternative way to restore the quality of water, followed by the environmental management to control the waste discharge to ensure the balance of the degradation rates or detoxifying by environmental factors. However, this process consumed a lot of time and cost. Besides, most of the metal ions, especially copper which is capable to bioaccumulate in aquatic organism and at the elevated level may cause physiological and biochemical alteration which leads to mortality. Environmental monitoring is the initial step presupposed evaluating the potential toxicity of effluent gushing at its purpose to discharge, avoiding the determining effects of contaminant in water bodies. Due to the high sensitivity of the aquatic life towards dissolving toxicant, the fish has been utilized as the biological measurement (Biomarker) to indicate the existence of toxicant exposure and/or the impact towards the evaluation of molecular, cellular to physiological level. Thus, this paper gives an overview of the manipulation of fish as a biomarker of heavy metals through behavior response, hepatocyte alteration, enzymatic reaction and proteomic studies which have proven to be very useful in the environmental pollution monitoring.
All living organisms including human beings in this biosphere are constantly exposed to a variety of xenobiotics. The enormous chemical load in the environment has been primarily through the modernization, industrialization and changes in lifestyle. The changing food habits to suit modern living pose a serious threat to a healthy life. Among others, consumption of soft drinks invariably forms a part of modern life. Mostly children and adolescents are the target groups vulnerable to frequent consumption, compromising the nutritious foods such as fruits, vegetables, milk and milk products. Logically, the quality of the soft drinks is determined by the type and quantity of chemicals present, including those present inherently in the water used for such preparations. The impact of soft drinks on human health has been a subject of in depth research. Consumption of soft drinks plays a major role in a variety of diseases like obesity, diabetes, dental and bone disorders and others, more so among children and adolescents. The toxic effects of soft drinks have gained much attention, due to the frequent scientific reports and media attention. The objective of this review is to provide a comprehensive scrutiny of the impact of soft drinks on health, as well as to suggest alternatives for a healthy life style.
This work was carried out for determining antimicrobial activity of Pistacia chinensis leaves
methanol extract and identifying the chemical composition of the plant extract. Methanol extract
was tested for antimicrobial activity using disc-diffusion assay and the extract was fractionated
on silica gel column chromatography for the isolation of the bio-active constituents. The leaves
extract of P. chinensis showed a significant antimicrobial effect, it strongly inhibited the growth
of the test bacteria and yeast studied. Chromatograpic separation of the methanol extract of
P. chinensis leaves has led to the isolation and characterization of β-sitosterol, luepol, and
six flavonoids, quercetin, myricetin, quercetin 3-O-α-rhamnoside, quercetin 3-O-β-glucoside,
myricetin 3-O-α-rhamnoside and myricetin 3-O-β-glucuronide using various chromatographic
procedures and the interpretation of spectral data in comparison with already existing data
reported in the literature. The results presented here may suggest that the leaves extract of P.
chinensis possess antimicrobial properties, and therefore, can be used as natural preservative
ingredients in food and/or pharmaceuticals.
The study examined the protein profile of Pectoralis major muscle in broiler chickens subjected to different freezing and thawing methods. Pectoralis major muscle was excised from the carcasses of twenty broiler chickens and split into left and right halves. The left half was subjected to slow freezing (-20oC) while the right half was rapidly frozen (-80oC). The samples were stored at their respective temperature for 2 weeks and assigned to either of tap water (27oC, 30 min), room temperature (26oC, 60 min), microwave (750W, 10 min) or chiller (4oC, 6 h) thawing. Changes in myofibrillar proteins following the thawing methods were monitored through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The electrophoretic profile indicated differences (p < 0.05) in intensities of the components of myofibrillar proteins among the thawing methods in both slow and rapidly frozen samples. Chiller thawing had significantly higher (p < 0.05) protein concentration than other methods in rapidly frozen samples. However, in slow freezing, there were no significant differences in protein concentration among the thawing methods. In rapidly frozen samples, the protein optical densities at molecular weight of 21, 27, 55 and 151kDa in tap water, chiller and room temperature thawing did not differ (p < 0.05). Similarly, in slowly frozen samples, protein optical densities at molecular weight of 21, 27, 85 and 151 kDa were not significantly different among chill, tap water and room temperature thawing. Microwave thawing consistently caused higher protein degradation resulting in significantly lower (p < 0.05) protein quality and quantity in both freezing methods.
The properties of collagens from Barramundi (Lates calcarifer) skin obtained by acid solubilized (control), pepsin and papain aided extractions were investigated. The yields of collagens (dry weight basis) for acid solubilized, pepsin and papain aided extractions were 8.1, 43.6 and 44.0%, respectively. The collagens were generally colorless although collagens from the enzymes aided-extractions were slightly darker. Based on the e-nose evaluation, the collagens were considered odorless. The pH of all the collagens was in the vicinity of 3; however, those extracted with papain had significantly higher pH. The polypeptide profiles obtained in the SDS-PAGE analysis for pepsin extracted collagen were similar to those of acid solubilized collagens. Papain extracted collagen had distinctly different SDS-PAGE pattern. All the extracted collagens were of type 1 with apparent peptides molecular weight distribution of 37 to 250 kDalton. They had high solubility in pH 2 to 5 and increasing NaCl concentration up to 6%.
The effects of four marination methods (water, papaya leaves juice, papaya leaves powder, and commercial meat tenderizer) on the meat quality and sensory attributes of cooked (moist and/or grill) Pectoralis major muscle of spent chicken were examined. Pectoralis major muscles from 40 spent chickens were assigned to four marination methods: marinating with 100 mL distilled water, Control (T1) (n = 10); marinating with papaya leaves juice (50 g PLP + 100 mL distilled water), T2 (n = 10); marinating with 50 g papaya leaves powder, T3 (n = 10); and marinating with 50 g commercial meat tenderizer, T4 (n = 10). Results of meat quality revealed the lowest drip loss, cooking loss, and shear force values of samples from T3 as compared to the other treatments. Additionally, myofibril fragmentation index of marinated Pectoralis major muscle from T3 was significantly higher than the other treatments. Among the treatments within the moist cooking method, T3 presented significantly higher scores for tenderness and juiciness and significantly lower score for flavour as compared to T1 and T2. In the grill cooking method, the highest scores for tenderness and juiciness were significantly demonstrated by samples of T2 and T3. Furthermore, samples from T2 had significantly higher score for flavour. Results of the present work demonstrated that marinating spent chicken meat with 50 g papaya leaves powder improved its tenderness and water holding capacity. Furthermore, greater improvement in tenderness and juiciness were observed when meat samples marinated with papaya leaves powder (T3) were further subjected to moist cooking method.
Honey is usually subjected to filtration and heating for bottling before commercialization. However, there is no standard procedure available for thermal treatment on honey. Honey is thermally heated at various temperature and duration based on individual experience to prolong the shelf life of honey in the market. The heating methods might decrease the biochemical components such as nutrients, enzymatic activities and vitamins to certain extent. In addition to water reduction, thermal treatment on sugar rich honey usually accompanied by the formation of 5-hydroxymethylfurfural (HMF). In the present study, the biochemical components in three commonly consumed honey in Malaysia, namely tualang, gelam and acacia honey were investigated before and after thermal treatment at 90oC for 30 min. The short period of heating time was found to degrade nutrients, enzymatic activities and water soluble vitamins in honey. The degradation of protein and enzyme via proteolytic digestion had attributed to the increase of free amino acids in honey. Based on the multivariate analysis, the most thermally affected biochemical components are crude fat, panthotenic acid (Vitamin B5) and diastase activity which explain for 86.4% of the total variance. The kinetic studies on the HMF formation revealed that the honey samples followed zero order kinetic model for the first 60 min of heating at 90oC. The findings indicate that the temperature and duration of heating during honey processing is essential to be investigated according to the honey origin. The initial biochemical composition of honey would affect the kinetic profile of HMF formation.
Collagen from shortfin scad (Decapterus macrosoma) bone was extracted using varying concentrations of acetic acid. Yields of extracted collagen were 1.01 ± 0.09% and 1.31 ± 0.07% for 0.5 M and 0.7 M acetic acids, respectively. The pH values of commercial collagen and shortfin scad bone collagen extracted using acetic acids (0.5 M and 0.7 M) were 6.52 ± 0.03, 4.99 ± 0.04, and 5.32 ± 0.01, respectively. The functional group analysis for collagen showed that the Amide A, Amide II and Amide III bands have been detected. The microstructure study showed that the isolated collagen had a porous fibril network. Maximum solubility for the commercial collagen was observed at pH 3, while the collagens extracted with 0.5 M and 0.7 M acetic acids were similar at pH 8. Meanwhile, the relative viscosities for all collagens indicated increasing values with increasing temperatures. In conclusion, the shortfin scad bone collagen showed potential for use as an alternative collagen. Although the values for shortfin scad bone collagen extracted by 0.5 M and 0.7 M acetic acids were lower than the commercial one, the collagens exhibited similar properties.