MyMedR

Displaying publications 341 - 360 of 1088 in total

Abstract:

Sort:

Fulltext Fatigue index and fatigue rate during an anaerobic performance under hypohydrations

Naharudin MN, Yusof A

PLoS One, 2013;8(10):e77290.
PMID: 24204790 DOI: 10.1371/journal.pone.0077290

BACKGROUND: Since hypohydration commonly occurs in sports, studies on anaerobic exercise performance under this condition have been extensively carried out. When describing anaerobic performance, authors usually refer to a drop in anaerobic performance as fatigue index (FI) which is conventionally calculated using peak and low power data points. Meanwhile, another possible method in explaining anaerobic fatigue is using the rate constant which is derived from the exponential decline of power output known as fatigue rate (FR). Few studies have demonstrated that there was no change in anaerobic performance under mild hypohydrations.
PURPOSE: This study aimed to compare the kinetics of power output using FI and FR of an anaerobic performance (Wingate test) under 2, 3 and 4% state of hypohydrations.
METHOD: Thirty two collegiate cyclists (age = 22 ± 2 years; body weight = 71.45 ± 3.43 kg; height = 173.23 ± 0.04 cm) were matched using their baseline anaerobic peak power (APP) then randomly divided into 4 groups of EU (euhydrated), 2H, 3H and 4H respectively.
RESULTS: As expected the, FI, APP, anaerobic lower power (ALP) and rating of perceived exertion (RPE) did not show significant differences between and within the groups. However, the FR in 3H (0.018 ± 0.005 s(-1)) and 4H (0.019 ± 0.010 s(-1)) were significantly lower than EU (0.033 ± 0.012 s(-1)). Post-test FR also showed significant reduction in 3H and 4H compared to their pre-test values (p<0.05).
CONCLUSION: Despite the lack of changes in APP and RPE, subjects in 3H and 4H showed evidence of lower reduction of power output over time. The findings support earlier reports which showed no change in anaerobic performance under mild hypohydrations. The relatively lower FR suggests higher drive in maintaining power output under hypohydrations of 3 and 4% body weight.

Matched MeSH terms: Oxygen Consumption/physiology
Evaluation of aeration strategy in moving bed sequencing batch reactor performing simultaneous 4-chlorophenol and nitrogen removal

Lim JW, Lim PE, Seng CE, Adnan R

Appl Biochem Biotechnol, 2013 Jun;170(4):831-40.
PMID: 23613119 DOI: 10.1007/s12010-013-0245-8

The aeration strategy ranging from intermittent to continuous aeration in the REACT period of moving bed sequencing batch reactor (MBSBR) was evaluated for simultaneous removal of 4-chlorophenol (4-CP) and nitrogen. The results show that the removal rates of 4-CP and ammonium nitrogen (NH(4)(+)-N) increased with the increase of continuous aeration period. In the presence of 4-CP, NH(4)(+)-N removal was mainly by the assimilation process. The removal of NH(4)(+)-N to oxidized nitrogen via oxidation was only observed after 4-CP was completely degraded with sufficient aeration period provided indicating the inhibitory effect of 4-CP on nitrification. As the intermittent aeration strategy would lead to slower 4-CP degradation resulting in the delay of nitrification process, continuous aeration would be the preferred strategy in the simultaneous removal of 4-CP and nitrogen in the MBSBR system.

Matched MeSH terms: Oxygen/metabolism
Fulltext Morphology, geology and water quality assessment of former tin mining catchment

Ashraf MA, Maah MJ, Yusoff I

ScientificWorldJournal, 2012;2012:369206.
PMID: 22761549 DOI: 10.1100/2012/369206

Bestari Jaya, former tin mining catchment covers an area of 2656.31 hectares comprised of four hundred and forty-two different-size lakes and ponds. The present study area comprise of 92 hectares of the catchment that include four large size lakes. Arc GIS version 9.2 used to develop bathymetric map, Global Positioning System (GPS) for hydrographical survey and flow meter was utilized for water discharge analysis (flow routing) of the catchment. The water quality parameters (pH, temperature, electric conductivity, dissolved oxygen DO, total dissolved solids TDS, chlorides, ammonium, nitrates) were analyzed by using Hydrolab. Quality assurance (QA) and quality control (QC) procedures were strictly followed throughout the field work and data analysis. Different procedures were employed to evaluate the analytical data and to check for possible transcription or dilution errors, changes during analysis, or unusual or unlikely values. The results obtained are compared with interim national water quality standards for Malaysia indicates that water quality of area is highly degraded. It is concluded that Bestri Jaya ex-mining catchment has a high pollution potential due to mining activities and River Ayer Hitam, recipient of catchment water, is a highly polluted river.

Matched MeSH terms: Oxygen/analysis*
Biosynthesis of high molecular weight hyaluronic acid by Streptococcus zooepidemicus using oxygen vector and optimum impeller tip speed

Lai ZW, Rahim RA, Ariff AB, Mohamad R

J Biosci Bioeng, 2012 Sep;114(3):286-91.
PMID: 22608992 DOI: 10.1016/j.jbiosc.2012.04.011

The potential use of n-dodecane and n-hexadecane as oxygen vectors for enhancing hyaluronic acid (HA) biosynthesis by Streptococcus zooepidemicus ATCC 39920 was investigated using a 2-L stirred-tank bioreactor equipped with helical ribbon or Rushton turbine impellers. The volumetric fraction of the oxygen vector influenced the gas-liquid volumetric oxygen transfer coefficient (K(L)a) positively. Batch HA fermentation with 1% (v/v) n-dodecane or 0.5% (v/v) n-hexadecane addition was carried out at different impeller tip speeds. Even though cell growth was lower in the fermentation with oxygen vector addition, the HA productivity and molecular weight were higher when compared to the fermentation without oxygen vector at low impeller tip speed. The highest HA concentration (4.25 gHA/l) and molecular weight (1.54 × 10(7) Da) were obtained when 0.5% (v/v) n-hexadecane and 0.785 m/s impeller tip speed of helical ribbon were used.

Matched MeSH terms: Oxygen/metabolism*
Synthesis of oxygenated fuel additives via the solventless etherification of glycerol

Ayoub M, Khayoon MS, Abdullah AZ

Bioresour Technol, 2012 May;112:308-12.
PMID: 22437049 DOI: 10.1016/j.biortech.2012.02.103

The synthesis of oxygenated fuel additives via solvent freebase-catalyzed etherification of glycerol is reported. The products of glycerol etherification arediglycerol (DG) and triglycerol (TG) with DG being the favorable one. The catalytic activity of different homogeneous alkali catalysts (LiOH, NaOH, KOH and Na(2)CO(3)) was investigated during the glycerol etherification process. LiOH exhibited an excellent catalytic activity during this reaction, indicated by the complete glycerol conversion with a corresponding selectivity of 33% toward DG. The best reaction conditions were a reaction temperature of 240°C, a catalyst/glycerol mass ratio of 0.02 and a reaction time of 6h. The influences of various reaction variables such as nature of the catalyst, catalyst loading, reaction time and reaction temperature on glycerol etherification were elucidated. Industrially, the findings attained in this study might contribute towards promoting the biodiesel industry through utilization of its by-products.

Matched MeSH terms: Oxygen/chemistry*
Neuroprotective properties of Loranthus parasiticus aqueous fraction against oxidative stress-induced damage in NG108-15 cells

Wong DZ, Kadir HA, Lee CL, Goh BH

J Nat Med, 2012 Jul;66(3):544-51.
PMID: 22318341 DOI: 10.1007/s11418-011-0622-y

Loranthus parasiticus, a Chinese folk medicine, has been widely used for the treatment of brain diseases, particularly in southwest China. Hence, the present neuroprotection model was designed to investigate its neuroprotective properties against H(2)O(2)-induced oxidative stress in NG108-15 cells. L. parasiticus aqueous fraction (LPAF), which was selected in the present study, had proved to be the most active fraction among the other tested extracts and fractions in our previous screening. The restoration of depleted intracellular glutathione (GSH), a major endogenous antioxidant, by LPAF was observed after H(2)O(2) insult. Pretreatment with LPAF substantially reduced the production of intracellular reactive oxygen species generated from H(2)O(2). Apoptotic features such as externalization of phosphatidylserine and disruption of mitochondrial membrane potential were significantly attenuated by LPAF. In addition, cell cycle analysis revealed a prominent decrease in the H(2)O(2)-induced sub-G(1) population by LPAF. Moreover, apoptotic morphological analysis by DAPI nuclear staining demonstrated that NG108-15 cells treated with H(2)O(2) exhibited apoptotic features, while such changes were greatly reduced in cells pretreated with LPAF. Taken together, these findings confirmed that LPAF exerts marked neuroprotective activity, which raises the possibility of potential therapeutic application of LPAF for managing oxidative stress-related neurological disorders and supports the traditional use of L. parasiticus in treating brain-related diseases.

Matched MeSH terms: Reactive Oxygen Species/metabolism
Anaerobic capacity of physically active eumenorrheic females at mid-luteal and mid-follicular phases of ovarian cycle

Shaharudin S, Ghosh AK, Ismail AA

J Sports Med Phys Fitness, 2011 Dec;51(4):576-82.
PMID: 22212259

The present study was undertaken to evaluate the anaerobic capacity in repeated sprint cycling bouts during mid-luteal (ML) and mid-follicular (MF) phases of ovarian cycle.

Matched MeSH terms: Oxygen Consumption*
Decomposition and biodegradability enhancement of textile wastewater using a combination of electron beam irradiation and activated sludge process

Mohd Nasir N, Teo Ming T, Ahmadun FR, Sobri S

Water Sci Technol, 2010;62(1):42-7.
PMID: 20595752 DOI: 10.2166/wst.2010.239

The research conducted a study on decomposition and biodegradability enhancement of textile wastewater using a combination of electron beam irradiation and activated sludge process. The purposes of this research are to remove pollutant through decomposition and to enhance the biodegradability of textile wastewater. The wastewater is treated using electron beam irradiation as a pre-treatment before undergo an activated sludge process. As a result, for non-irradiated wastewater, the COD removal was achieved to be between 70% and 79% after activated sludge process. The improvement of COD removal efficiency increased to 94% after irradiation of treated effluent at the dose of 50 kGy. Meanwhile, the BOD(5) removal efficiencies of non-irradiated and irradiated textile wastewater were reported to be between 80 and 87%, and 82 and 99.2%, respectively. The maximum BOD(5) removal efficiency was achieved at day 1 (HRT 5 days) of the process of an irradiated textile wastewater which is 99.2%. The biodegradability ratio of non-irradiated wastewater was reported to be between 0.34 and 0.61, while the value of biodegradability ratio of an irradiated wastewater increased to be between 0.87 and 0.96. The biodegradability enhancement of textile wastewater is increased with increasing the doses. Therefore, an electron beam radiation holds a greatest application of removing pollutants and also on enhancing the biodegradability of textile wastewater.

Matched MeSH terms: Oxygen/chemistry
Synthesis of fatty acid methyl ester from used vegetable cooking oil by solid reusable Mg 1-x Zn 1+x O2 catalyst

Olutoye MA, Hameed BH

Bioresour Technol, 2011 Feb;102(4):3819-26.
PMID: 21183335 DOI: 10.1016/j.biortech.2010.11.100

Fatty acid methyl ester was produced from used vegetable cooking oil using Mg(1-)(x) Zn(1+)(x)O(2) solid catalyst and the performance monitored in terms of ester content obtained. Used vegetable cooking oil was employed to reduce operation cost of biodiesel. The significant operating parameters which affect the overall yield of the process were studied. The highest ester content, 80%, was achieved with the catalyst during 4h 15 min reaction at 188°C with methanol to oil ratio of 9:1 and catalyst loading of 2.55 wt% oil. Also, transesterification of virgin oil gave higher yield with the heterogeneous catalyst and showed high selectivity towards ester production. The used vegetable cooking oil did not require any rigorous pretreatment. Catalyst stability was examined and there was no leaching of the active components, and its performance was as good at the fourth as at the first cycle.

Matched MeSH terms: Oxygen/chemistry*
Fulltext Prooxidant/antioxidant ratio (ProAntidex) as a better index of net free radical scavenging potential

Ling LT, Palanisamy UD, Cheng HM

Molecules, 2010 Nov;15(11):7884-92.
PMID: 21060296 DOI: 10.3390/molecules15117884

The antioxidant activity of several Malaysian plant extracts was analyzed simultaneously with their pro-oxidant capacity. This ratio represents an index (ProAntidex) of the net free radical scavenging ability of whole plant extracts. We observed that ethanolic extracts of Nephelium lappaceum peel, Fragaria x ananassa leaf, Lawsonia inermis leaf, Syzygium aqueum leaf and grape seed had a lower Pro-Antidex than the commercially available Emblica™ extract which is an antioxidant agent with very low pro-oxidant activity. Among the aqueous extracts, Lawsonia inermis leaf, Nephelium mutobile leaf and grape seed had lower pro-oxidant activity compared to the Emblica™ extract. Among these extracts, aqueous extract of Nephelium mutobile leaf had a very low index of 0.05 compared to 0.69 for Emblica™. Most of the extracts had a far lower ProAntidex compared to the Vitamin C. The index enables us to identify extracts with high net free radical scavenging activity potential. The ProAntidex is beneficial as a screening parameter to the food industries and healthcare.

Matched MeSH terms: Reactive Oxygen Species/chemistry*
Trends in the use of Fenton, electro-Fenton and photo-Fenton for the treatment of landfill leachate

Umar M, Aziz HA, Yusoff MS

Waste Manag, 2010 Nov;30(11):2113-21.
PMID: 20675113 DOI: 10.1016/j.wasman.2010.07.003

Advanced oxidation processes (AOPs) such as Fenton, electro-Fenton and photo-Fenton have been applied effectively to remove refractory organics from landfill leachate. The Fenton reaction is based on the addition of hydrogen peroxide to the wastewater or leachate in the presence of ferrous salt as a catalyst. The use of this technique has proved to be one of the best compromises for landfill leachate treatment because of its environmental and economical advantages. Fenton process has been used successfully to mineralize wide range of organic constituents present in landfill leachate particularly those recalcitrant to biological degradation. The present study reviews the use of Fenton and related processes in terms of their increased application to landfill leachate. The effects of various operating parameters and their optimum ranges for maximum COD and color removal are reviewed with the conclusion that the Fenton and related processes are effective and competitive with other technologies for degradation of both raw and pre-treated landfill leachate.

Matched MeSH terms: Oxygen/chemistry
Treatment of p-nitrophenol in an adsorbent-supplemented sequencing batch reactor

Loo YM, Lim PE, Seng CE

Environ Technol, 2010 Apr 14;31(5):479-87.
PMID: 20480823 DOI: 10.1080/09593330903514482

The objective of this research was to evaluate the treatment ofp-nitrophenol (PNP) as a sole organic carbon source using a sequencing batch reactor (SBR) with the addition of adsorbent. Two types of adsorbents, namely powdered activated carbon (PAC) and pyrolysed rice husk (PRH) were used in this study. Two identical SBRs, each with a working volume of 10 L, were operated with fill, react, settle, draw and idle periods in the ratio of 2:8:1:0.75:0.25 for a cycle time of 12 h. The results showed that, without the addition of adsorbent, increasing the influent PNP concentration to 200 mg/L resulted in the deterioration of chemical oxygen demand (COD) removal efficiency and PNP removal efficiency in the SBRs. Improvement in the performance of the SBR was observed with the addition of PAC. When the dosage of 1.0 g PAC/cycle was applied, COD removal of 95% and almost complete removal of PNP were achieved at the influent PNP concentration of 300 mg/L. The kinetic study showed that the rates of COD and PNP removal can be described by the first-order kinetics. The enhancement of performance in the PAC-supplemented SBR was postulated to be due to the initial adsorption of PNP by the freshly added and the bioregenerated PAC, thus reducing the inhibition on the microorganisms. The PRH was found to be ineffective because of its relatively low adsorption capacity for PNP, compared with that of PAC.

Matched MeSH terms: Oxygen/chemistry
Effect of preparation conditions of activated carbon from bamboo waste for real textile wastewater

Ahmad AA, Hameed BH

J Hazard Mater, 2010 Jan 15;173(1-3):487-93.
PMID: 19765899 DOI: 10.1016/j.jhazmat.2009.08.111

This study deals with the use of activated carbon prepared from bamboo waste (BMAC), as an adsorbent for the removal of chemical oxygen demand (COD) and color of cotton textile mill wastewater. Bamboo waste was used to prepare activated carbon by chemical activation using phosphoric acid (H(3)PO(4)) as chemical agent. The effects of three preparation variables activation temperature, activation time and H(3)PO(4):precursor (wt%) impregnation ratio on the color and COD removal were investigated. Based on the central composite design (CCD) and quadratic models were developed to correlate the preparation variables to the color and COD. From the analysis of variance (ANOVA), the most influential factor on each experimental design response was identified. The optimum condition was obtained by using temperature of 556 degrees C, activation time of 2.33 h and chemical impregnation ratio of 5.24, which resulted in 93.08% of color and 73.98% of COD.

Matched MeSH terms: Oxygen/analysis
Characterisation of microbial flocs formed from raw textile wastewater in aerobic biofilm reactor (ABR)

Ibrahim Z, Amin MF, Yahya A, Aris A, Umor NA, Muda K, et al.

Water Sci Technol, 2009;60(3):683-8.
PMID: 19657163 DOI: 10.2166/wst.2009.440

Microbial flocs formed from raw textile wastewater in a prototype Aerobic Biofilm Reactor (ABR) system were characterised and studied for their potential use in the treatment of textile wastewater. After 90-100 days of operation, microbial flocs of loose irregular structures were obtained from the reactor with good settling velocity of 33 m/h and sludge volume index (SVI) of 48.2 mL/g. Molecular analysis of the flocs using PCR-amplified 16S rDNA sequence showed 98% homology to those of Bacillus sp, Paenibacillus sp and Acromobacter sp. Detection of Ca(2+)(131 mg/g) and Fe(2+)(131 mg/g) using atomic absorption spectrometer might be implicated with the flocs formation. In addition, presence of Co(2+) and Ni(2+) were indicative of the flocs ability to accumulate at least a fraction of the metals' present in the wastewater. When the flocs were used for the treatment of raw textile wastewater, they showed good removal of COD and colour about 55% and 70% respectively, indicating their potential application.

Matched MeSH terms: Oxygen/isolation & purification
Respirometric analysis of activated sludge models from palm oil mill effluent

Damayanti A, Ujang Z, Salim MR, Olsson G, Sulaiman AZ

Bioresour Technol, 2010 Jan;101(1):144-9.
PMID: 19734044 DOI: 10.1016/j.biortech.2009.08.034

Activated sludge models (ASMs) have been widely used as a basis for further model development in wastewater treatment processes. Values for parameters to be used are vital for the accuracy of the modeling approach. A continuous stirred tank reactor (CSTR), as open respirometer with continuous flow for 20 h is used in ASMs. The dissolved oxygen (DO) profile for 11 days was monitored. It was found the mass transfer coefficient K(La) is 0.3 h(-1) during lag and start feed phase and 0.01 h(-1) during stop feed phase, while the heterotrophic yield coefficient Y(H) is 0.44. Some of the chemical oxygen demand (COD) fractionations of palm oil mill effluent (POME) using respirometric test in ASM models are S(s) 50 mg/L, S(I) 16,600 mg/L, X(S) 25,550 mg/L, and X(I) 2,800 mg/L. The comparison of experimental and ASM1 from OUR concentration is found to fit well.

Matched MeSH terms: Oxygen/analysis*
Water quality evaluation system to assess the status and the suitability of the Citarum river water to different uses

Fulazzaky MA

Environ Monit Assess, 2010 Sep;168(1-4):669-84.
PMID: 19728125 DOI: 10.1007/s10661-009-1142-z

Water quality degradation in the Citarum river will increase from the year to year due to increasing pollutant loads when released particularly from Bandung region of the upstream areas into the river without treatment. This will be facing the problems on water quality status to use for multi-purposes in the downstream areas. The water quality evaluation system is used to evaluate the available water condition that distinguishes into two categories, i.e., the water quality index (WQI) and water quality aptitude (WQA). The assessment of water quality for the Citarum river from 10 selected stations was found that the WQI situates in the bad category generally and the WQA ranges from the suitable quality for agriculture and livestock watering uses to the unsuitable for biological potential function, drinking water production, and leisure activities and sports in the upstream areas of Saguling dam generally.

Matched MeSH terms: Oxygen/analysis
Landfill leachate treatment by electrochemical oxidation

Bashir MJ, Isa MH, Kutty SR, Awang ZB, Aziz HA, Mohajeri S, et al.

Waste Manag, 2009 Sep;29(9):2534-41.
PMID: 19523802 DOI: 10.1016/j.wasman.2009.05.004

This study investigated the electrochemical oxidation of stabilized leachate from Pulau Burung semi-aerobic sanitary landfill by conducting laboratory experiments with sodium sulfate Na(2)SO(4) (as electrolyte) and graphite carbon electrodes. The control parameters were influent COD, current density and reaction time, while the responses were BOD removal, COD removal, BOD:COD ratio, color and pH. Na(2)SO(4) concentration was 1 g/L. Experiments were conducted based on a three-level factorial design and response surface methodology (RSM) was used to analyze the results. The optimum conditions were obtained as 1414 mg/L influent COD concentration, 79.9 mA/cm(2) current density and 4 h reaction time. This resulted in 70% BOD removal, 68% COD removal, 84% color removal, 0.04 BOD/COD ratio and 9.1 pH. Electrochemical treatment using graphite carbon electrode was found to be effective in BOD, COD and color removal but was not effective in increasing the BOD/COD ratio or enhancing biodegradability of the leachate. The color intensity of the treated samples increased at low influent COD and high current density due to corrosion of electrode material.

Matched MeSH terms: Oxygen/analysis
Hexavalent chromium adsorption on impregnated palm shell activated carbon with polyethyleneimine

Owlad M, Aroua MK, Wan Daud WM

Bioresour Technol, 2010 Jul;101(14):5098-103.
PMID: 20156679 DOI: 10.1016/j.biortech.2010.01.135

Removal of Cr(VI) ions from aqueous solution was investigated using modified palm shell activated carbon. Low Molecular Weight Polyethyleneimine (LMW PEI) was used for impregnation purpose. The maximum amount of LMW PEI adsorbed on activated carbon was determined to be approximately 228.2mg/g carbon. The adsorption experiments were carried out in a batch system using potassium dichromate K(2)Cr(2)O(7) as the source of Cr(VI) in the synthetic waste water and modified palm shell activated carbon as the adsorbent. The effects of pH, concentration of Cr(VI) and PEI loaded on activated carbon were studied. The adsorption data were found to fit well with the Freundlich isotherm model. This modified Palm shell activated carbon showed high adsorption capacity for chromium ions.

Matched MeSH terms: Oxygen/chemistry
Biological kinetics evaluation of anaerobic stabilization pond treatment of palm oil mill effluent

Wong YS, Kadir MO, Teng TT

Bioresour Technol, 2009 Nov;100(21):4969-75.
PMID: 19560338 DOI: 10.1016/j.biortech.2009.04.074

Biological kinetic (bio-kinetic) study of the anaerobic stabilization pond treatment of palm oil mill effluent (POME) was carried out in a laboratory anaerobic bench scale reactor (ABSR). The reactor was operated at different feed flow-rates of 0.63, 0.76, 0.95, 1.27, 1.9 and 3.8l of raw POME for a day. Chemical oxygen demand (COD) as influent substrates was selected for bio-kinetic study. The investigation showed that the growth yield (Y(G)), specific biomass decay (b), maximum specific biomass growth rate (mu(max)), saturation constant (K(s)) and critical retention time (Theta(c)) were in the range of 0.990 g VSS/g COD(removed) day, 0.024 day(-1), 0.524 day(-1), 203.433 g COD l(-1) and 1.908 day, respectively.

Matched MeSH terms: Oxygen/isolation & purification
Removal of heavy metal ions from wastewater by chemically modified plant wastes as adsorbents: a review

Wan Ngah WS, Hanafiah MA

Bioresour Technol, 2008 Jul;99(10):3935-48.
PMID: 17681755

The application of low-cost adsorbents obtained from plant wastes as a replacement for costly conventional methods of removing heavy metal ions from wastewater has been reviewed. It is well known that cellulosic waste materials can be obtained and employed as cheap adsorbents and their performance to remove heavy metal ions can be affected upon chemical treatment. In general, chemically modified plant wastes exhibit higher adsorption capacities than unmodified forms. Numerous chemicals have been used for modifications which include mineral and organic acids, bases, oxidizing agent, organic compounds, etc. In this review, an extensive list of plant wastes as adsorbents including rice husks, spent grain, sawdust, sugarcane bagasse, fruit wastes, weeds and others has been compiled. Some of the treated adsorbents show good adsorption capacities for Cd, Cu, Pb, Zn and Ni.

Matched MeSH terms: Oxygen/chemistry

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links