Displaying publications 21 - 40 of 40 in total

Abstract:
Sort:
  1. Fulltext An Experimental Study of Briquetting Process of Torrefied Rubber Seed Kernel and Palm Oil Shell
    Hamid MF, Idroas MY, Ishak MZ, Zainal Alauddin ZA, Miskam MA, Abdullah MK
    Biomed Res Int, 2016;2016:1679734.
    PMID: 27419127 DOI: 10.1155/2016/1679734
    Torrefaction process of biomass material is essential in converting them into biofuel with improved calorific value and physical strength. However, the production of torrefied biomass is loose, powdery, and nonuniform. One method of upgrading this material to improve their handling and combustion properties is by densification into briquettes of higher density than the original bulk density of the material. The effects of critical parameters of briquetting process that includes the type of biomass material used for torrefaction and briquetting, densification temperature, and composition of binder for torrefied biomass are studied and characterized. Starch is used as a binder in the study. The results showed that the briquette of torrefied rubber seed kernel (RSK) is better than torrefied palm oil shell (POS) in both calorific value and compressive strength. The best quality of briquettes is yielded from torrefied RSK at the ambient temperature of briquetting process with the composition of 60% water and 5% binder. The maximum compressive load for the briquettes of torrefied RSK is 141 N and the calorific value is 16 MJ/kg. Based on the economic evaluation analysis, the return of investment (ROI) for the mass production of both RSK and POS briquettes is estimated in 2-year period and the annual profit after payback was approximately 107,428.6 USD.
  2. LOC285629 regulates cell proliferation and motility in colorectal cancer cells
    Nasir SN, Abu N, Ab Mutalib NS, Ishak M, Sagap I, Mazlan L, et al.
    Clin Transl Oncol, 2018 Jun;20(6):775-784.
    PMID: 29098557 DOI: 10.1007/s12094-017-1788-x
    PURPOSE: Colorectal cancer (CRC) is one of the most widely diagnosed cancers in men and women worldwide. With the advancement of next-generation sequencing technologies, many studies have highlighted the involvement of long non-coding RNAs (lncRNAs) in cancer development. Growing evidence demonstrates that lncRNAs play crucial roles in regulating gene and protein expression and are involved in various cancers, including CRC. The field of lncRNAs is still relatively new and a lot of novel lncRNAs have been discovered, but their functional roles are yet to be elucidated. This study aims to characterize the expression and functional roles of a novel lncRNA in CRC.

    METHOD: Several methods were employed to assess the function of LOC285629 such as gene silencing, qPCR, proliferation assay, BrdU assay, transwell migration assay, ELISA and protein profiler.

    RESULTS: Via in silico analyses, we identified significant downregulation of LOC285629, a novel lncRNA, across CRC stages. LOC285629 expression was significantly downregulated in advanced stages (Stage III and IV) compared to Stage I (Kruskal-Wallis Test; p = 0.0093). Further in-house validation showed that the expression of LOC285629 was upregulated in colorectal cancer tissues and cell lines compared to the normal counterparts, but was downregulated in advanced stages. By targeting LOC285629, the viability, proliferative abilities, invasiveness and resistance of colorectal cancer cells towards 5-fluorouracil were reduced. It was also discovered that LOC285629 may regulate cancer progression by targeting several different proteins, namely survivin, BCL-xL, progranulin, PDGF-AA, enolase 2 and p70S6 K.

    CONCLUSION: Our findings suggest that LOC285629 may be further developed as a potential therapeutic target for CRC treatment.

  3. Fulltext Lattice Boltzmann Method of Different BGA Orientations on I-Type Dispensing Method
    Abas A, Gan ZL, Ishak MH, Abdullah MZ, Khor SF
    PLoS One, 2016;11(7):e0159357.
    PMID: 27454872 DOI: 10.1371/journal.pone.0159357
    This paper studies the three dimensional (3D) simulation of fluid flows through the ball grid array (BGA) to replicate the real underfill encapsulation process. The effect of different solder bump arrangements of BGA on the flow front, pressure and velocity of the fluid is investigated. The flow front, pressure and velocity for different time intervals are determined and analyzed for potential problems relating to solder bump damage. The simulation results from Lattice Boltzmann Method (LBM) code will be validated with experimental findings as well as the conventional Finite Volume Method (FVM) code to ensure highly accurate simulation setup. Based on the findings, good agreement can be seen between LBM and FVM simulations as well as the experimental observations. It was shown that only LBM is capable of capturing the micro-voids formation. This study also shows an increasing trend in fluid filling time for BGA with perimeter, middle empty and full orientations. The perimeter orientation has a higher pressure fluid at the middle region of BGA surface compared to middle empty and full orientation. This research would shed new light for a highly accurate simulation of encapsulation process using LBM and help to further increase the reliability of the package produced.
  4. Fulltext Methylation Profile of Cancer Testis Antigens in Colorectal Cancer
    Abu N, Rus Bakarurraini NAA, Nasir SN, Ishak M, Baharuddin R, Jamal R, et al.
    Iran J Immunol, 2023 Mar 14;20(1):83-91.
    PMID: 36932973 DOI: 10.22034/iji.2023.92600.2171
    BACKGROUND: Cancer testis antigens (CTAs) are a class of immune-stimulating antigens often overexpressed in many types of cancers. The usage of the CTAs as immunotherapy targets have been widely investigated in different cancers including melanoma, hematological malignancies, and colorectal cancer. Studies have indicated that the epigenetic regulation of the CTAs such as the methylation status may affect the expression of the CTAs. However, the report on the methylation status of the CTAs is conflicting. The general methylation profile of the CTAs, especially in colorectal cancer, is still elusive.

    OBJECTIVE: To determine the methylation profile of the selected CTAs in our colorectal cancer patients.

    METHODS: A total of 54 pairs of colorectal cancer samples were subjected to DNA methylation profiling using the Infinium Human Methylation 450K bead chip.

    RESULTS: We found that most of the CTAs were hypomethylated, and CCNA1 and TMEM108 genes were among the few CTAs that were hypermethylated.

    CONCLUSION: Overall, our brief report has managed to show the overall methylation profile in over the 200 CTAs in colorectal cancer and this could be used for further refining any immunotherapy targets.

  5. Fulltext Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties
    Alsubari S, Zuhri MYM, Sapuan SM, Ishak MR, Ilyas RA, Asyraf MRM
    Polymers (Basel), 2021 Jan 28;13(3).
    PMID: 33525703 DOI: 10.3390/polym13030423
    The interest in using natural fiber reinforced composites is now at its highest. Numerous studies have been conducted due to their positive benefits related to environmental issues. Even though they have limitations for some load requirements, this drawback has been countered through fiber treatment and hybridization. Sandwich structure, on the other hand, is a combination of two or more individual components with different properties, which when joined together can result in better performance. Sandwich structures have been used in a wide range of industrial material applications. They are known to be lightweight and good at absorbing energy, providing superior strength and stiffness-to-weight ratios, and offering opportunities, through design integration, to remove some components from the core element. Today, many industries use composite sandwich structures in a range of components. Through good design of the core structure, one can maximize the strength properties, with a low density. However, the application of natural fiber composites in sandwich structures is still minimal. Therefore, this paper reviewed the possibility of using a natural fiber composite in sandwich structure applications. It addressed the mechanical properties and energy-absorbing characteristics of natural fiber-based sandwich structures tested under various compression loads. The results and potential areas of improvement to fit into a wide range of engineering applications were discussed.
  6. Fulltext Lattice Boltzmann Model of 3D Multiphase Flow in Artery Bifurcation Aneurysm Problem
    Abas A, Mokhtar NH, Ishak MH, Abdullah MZ, Ho Tian A
    Comput Math Methods Med, 2016;2016:6143126.
    PMID: 27239221 DOI: 10.1155/2016/6143126
    This paper simulates and predicts the laminar flow inside the 3D aneurysm geometry, since the hemodynamic situation in the blood vessels is difficult to determine and visualize using standard imaging techniques, for example, magnetic resonance imaging (MRI). Three different types of Lattice Boltzmann (LB) models are computed, namely, single relaxation time (SRT), multiple relaxation time (MRT), and regularized BGK models. The results obtained using these different versions of the LB-based code will then be validated with ANSYS FLUENT, a commercially available finite volume- (FV-) based CFD solver. The simulated flow profiles that include velocity, pressure, and wall shear stress (WSS) are then compared between the two solvers. The predicted outcomes show that all the LB models are comparable and in good agreement with the FVM solver for complex blood flow simulation. The findings also show minor differences in their WSS profiles. The performance of the parallel implementation for each solver is also included and discussed in this paper. In terms of parallelization, it was shown that LBM-based code performed better in terms of the computation time required.
  7. Fulltext Helicobacter pylori related functional dyspepsia in a defined Malaysian population
    Nafeeza MI, Isa MR, Kudva MV, Ishak MS, Mazlam MZ, Haron A, et al.
    Malays J Med Sci, 2000 Jan;7(1):22-6.
    PMID: 22844211 MyJurnal
    The objective of the study was to determine the prevalence of H. pylori in functional dyspepsia among the three main races in Malaysia. Gastric antral biopsies from 233 (98 males, 135 females; age range: 17-75 years, mean age 39.5 years) patients attending the Universiti Kebangsaan Malaysia (UKM) gastroenterology clinic were assessed for the presence of H. pylori by culture and histology. About a third of the cases (79 of 233 (34%); 34 males, 45 females; mean age 42.6 yrs) were positive for H. pylori. The presence of H. pylori was always associated with antral gastritis. Malay patients were least likely to be positive for H. pylori (10 of 88 (11.4%); 5 males, 5 females; mean age 35.7 yrs) compared to the Chinese (43 of 95 (45%); 19 males; 24 females; mean age 40.2 yrs) and Indian patients (23 of 41 (56%); 10 males, 13 females; mean age 48.1 yrs). We found that H. pylori were most common among Chinese followed by Indians. However, the relative risk for the Indians was 8.58 and 6.29 for the Chinese compared to Malays. We conclude that the prevalence of H. pylori in patients with functional dyspepsia differs considerably with respect to ethnic groups.
  8. Finite element analysis of different surgical approaches in various occlusal loading locations for zygomatic implant placement for the treatment of atrophic maxillae
    Ishak MI, Abdul Kadir MR, Sulaiman E, Abu Kasim NH
    Int J Oral Maxillofac Surg, 2012 Sep;41(9):1077-89.
    PMID: 22575179 DOI: 10.1016/j.ijom.2012.04.010
    The aim of this study was to compare two different types of surgical approaches, intrasinus and extramaxillary, for the placement of zygomatic implants to treat atrophic maxillae. A computational finite element simulation was used to analyze the strength of implant anchorage for both approaches in various occlusal loading locations. Three-dimensional models of the craniofacial structures surrounding a region of interest, soft tissue and framework were developed using computed tomography image datasets. The implants were modelled using computer-aided design software. The bone was assumed to be linear isotropic with a stiffness of 13.4 GPa, and the implants were assumed to be made of titanium with a stiffness of 110 GPa. Masseter forces of 300 N were applied at the zygomatic arch, and occlusal loads of 150 N were applied vertically onto the framework surface at different locations. The intrasinus approach demonstrated more satisfactory results and could be a viable treatment option. The extramaxillary approach could also be recommended as a reasonable treatment option, provided some improvements are made to address the cantilever effects seen with that approach.
  9. Development and characterization of sugar palm starch and poly(lactic acid) bilayer films
    Sanyang ML, Sapuan SM, Jawaid M, Ishak MR, Sahari J
    Carbohydr Polym, 2016 08 01;146:36-45.
    PMID: 27112848 DOI: 10.1016/j.carbpol.2016.03.051
    The development and characterization of environmentally friendly bilayer films from sugar palm starch (SPS) and poly(lactic acid) (PLA) were conducted in this study. The SPS-PLA bilayer films and their individual components were characterized for their physical, mechanical, thermal and water barrier properties. Addition of 50% PLA layer onto 50% SPS layer (SPS50-PLA50) increased the tensile strength of neat SPS film from 7.74 to 13.65MPa but reduced their elongation at break from 46.66 to 15.53%. The incorporation of PLA layer significantly reduced the water vapor permeability as well as the water uptake and solubility of bilayer films which was attributed to the hydrophobic characteristic of the PLA layer. Furthermore, scanning electron microscopy (SEM) image of SPS50-PLA50 revealed lack of strong interfacial adhesion between the SPS and PLA. Overall, the incorporation of PLA layer onto SPS films enhances the suitability of SPS based films for food packaging.
  10. Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties
    Jumaidin R, Sapuan SM, Jawaid M, Ishak MR, Sahari J
    Int J Biol Macromol, 2016 Aug;89:575-81.
    PMID: 27177458 DOI: 10.1016/j.ijbiomac.2016.05.028
    The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10-40wt%. The thermoplastics were melt-mixed and then hot pressed at 140°C for 10min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young's modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30wt% agar content have the highest tensile strength. Higher content of agar (40wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc.
  11. Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging
    Sanyang ML, Sapuan SM, Jawaid M, Ishak MR, Sahari J
    J Food Sci Technol, 2016 Jan;53(1):326-36.
    PMID: 26787952 DOI: 10.1007/s13197-015-2009-7
    In this study, sugar palm starch (SPS) films were developed using glycerol (G), sorbitol (S) or their combination (GS) as plasticizers at the ratio of 15, 30 and 45 (wt)% using casting technique. The addition of plasticizers to SPS film-forming solutions helped to overcome the brittle and fragile nature of unplasticized SPS films. Increased plasticizer concentration resulted to an increase in film thickness, moisture content and solubility. On the contrary, density and water absorption of plasticized films decreased with increasing plasticizer concentration. Raising the plasticizer content from 15 to 45 % showed less effect on the moisture content and water absorption of S-plasticized films. Films containing glycerol and glycerol-sorbitol plasticizer (G, and GS) demonstrated higher moisture content, solubility and water absorption capacity compared to S-plasticized films. The results obtained in this study showed that plasticizer type and concentration significantly improves film properties and enhances their suitability for food packaging applications.
  12. Telemedicine in neurosurgery using international digital telephone services between Japan and Malaysia--technical note
    Houkin K, Fukuhara S, Selladurai BM, Zurin AA, Ishak M, Kuroda S, et al.
    Neurol. Med. Chir. (Tokyo), 1999 Oct;39(11):773-7; discussion 777-8.
    PMID: 10598447
    A new image transmission and teleconference system using international digital telephone services was established between Japan and Malaysia. This new system consists of an ordinary personal computer, image scanner, and terminal adapter for digital telephone lines. The quality of images transferred using this system was high enough for diagnosis and discussion except for images such as radiographs requiring huge data transfer. Transmission of one image took approximately 20 seconds. The cost performance was almost equal to the conventional mailing system. The most remarkable advantage of this new system is the high quality of transferred images, the cost and time performance, and security of the medical information. New communication systems using international digital networks including the internet may allow re-distribution of medical resources between advanced countries and developing countries in neurosurgery.
  13. Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites
    Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES
    Carbohydr Polym, 2018 Dec 15;202:186-202.
    PMID: 30286991 DOI: 10.1016/j.carbpol.2018.09.002
    Sugar palm fibre (SPF) was treated with NaClO2, bleached with NaOH and subsequently hydrolyzed with acid to obtain sugar palm nanocrystalline cellulose (SPNCCs). Bionanocomposites in the form of films were prepared by mixing sugar palm starch (SPS) and sorbitol/glycerol with different nanofiller SPNCCs compositions (0-1.0 wt%) using solution casting method. The resulting fibres and nanocomposites were characterized in terms of morphology (FESEM and TEM), footprint, crystallinity (XRD), light transmittance, biodegradability, physical, water barrier, thermal (TGA, DSC and DMA) and mechanical properties. The length (L), diameter (D) and L/D values of the SPNCCs were 130 ± 30.23, 8.5 ± 1.82 nm, and 15.3, respectively. The SPS/SPNCCs nanocomposite films exhibited higher crystallinity, tensile strength, Young's modulus, thermal and water-resistance compared to the neat SPS film. The results showed that the tensile strength and moduli of the bionanocomposites increased after being reinforced with SPNCCs and the optimum nanofiller content was 0.5%.
  14. Sugar palm nanofibrillated cellulose (Arenga pinnata (Wurmb.) Merr): Effect of cycles on their yield, physic-chemical, morphological and thermal behavior
    Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES
    Int J Biol Macromol, 2019 Feb 15;123:379-388.
    PMID: 30447353 DOI: 10.1016/j.ijbiomac.2018.11.124
    Nanofibrillated cellulose (NFCs) were extracted from sugar palm fibres (SPS) in two separate stages; delignification and mercerization to remove lignin and hemicellulose, respectively. Subsequently, the obtained cellulose fibres were then mechanically extracted into nanofibres using high pressurized homogenization (HPH). The diameter distribution sizes of the isolated nanofibres were dependent on the cycle number of HPH treatment. TEM micro-images displayed the decreasing trend of NFCs diameter, from 21.37 to 5.5 nm when the number of cycle HPH was increased from 5 to 15 cycles, meanwhile TGA and XRD analysis showed that the degradation temperature and crystallinity of the NFCs were slightly increased from 347 to 347.3 °C and 75.38 to 81.19% respectively, when the number of cycles increased. Others analysis also were carried on such as FT-IR, FESEM, AFM, physical properties, zeta potential and yield analysis. The isolated NFCs may be potentially applied in various application, such as tissue engineering scaffolds, bio-nanocomposites, filtration media, bio-packaging and etc.
  15. Fulltext The autoantibody profile and its association with clinical manifestations in Malay SLE patients
    Maraina CH, Kamaliah MD, Ishak M
    Asian Pac J Allergy Immunol, 2004 Mar;22(1):33-7.
    PMID: 15366656
    A cross sectional study was conducted to determine the auto-antibody profile of Malay SLE patients in Kelantan, North East Malaysia and to correlate them with clinical presentations. Eighty-two Malay SLE patients who fulfilled the ARA criteria underwent the following tests: ANA, anti-dsDNA antibody, anti-ENA antibody and RF. The results revealed that ANA was positive in 91.5% of the patients, anti-dsDNA antibody in 53.7%, however, anti-ENA antibodies were positive in only 9.8% of the cases at the time of the study and none had a positive RF. The profile of autoantibodies was similar to other studies except for a lower incidence of anti-ENA antibodies. Sixty three percent of patients had lupus nephritis. The pattern of clinical presentations were noted to be more similar to those found among Chinese and Indian SLE populations than compared to the Caucasians. There was a significant association between anti-dsDNA antibody and lupus nephritis and between anti-ENA antibody and thrombocytopenia.
  16. Fulltext ANA negative (Ro) lupus erythematosus with multiple major organ involvement: a case report
    Che Maraina CH, Kamaliah MD, Ishak M
    Asian Pac J Allergy Immunol, 2002 Dec;20(4):279-82.
    PMID: 12744629
    Anti-nuclear antibody (ANA) negative systemic lupus erythematosus (SLE) occurs in about 4-13% of SLE cases. A small group of ANA negative SLE patients with positive anti-Ro antibodies usually present with typical vasculitic skin lesions which can be associated with photosensitivity, renal disease, congenital heart block or neonatal lupus. We present a case of a persistently ANA negative patient who presented with joint pain, rashes, mouth ulcer and alopecia. Clinical diagnosis of systemic lupus erythematosus was made even though ANA was negative. She was started on steroids and went into remission. Later, she developed several episodes of convulsions associated with fever and prominent vasculitic lesions. The patient was also found to have microscopic hematuria, proteinuria, anemia and thrombocytopenia. Renal biopsy showed lupus nephritis class 1B. Due to the prominent skin lesions, we performed anti-extractable nuclear antigens (ENA) antibodies test and anti-Ro turned out to be positive. The final diagnosis was ANA negative SLE (Ro lupus) with cutaneous, renal, musculoskeletal, hematological and cerebral Involvement.
  17. Fulltext An investigation on longitudinal residual strains distribution of thin-walled press-braked cold formed steel sections using 3D FEM technique
    Mutafi A, Yidris N, Ishak MR, Zahari R
    Heliyon, 2018 Nov;4(11):e00937.
    PMID: 30839801 DOI: 10.1016/j.heliyon.2018.e00937
    Steel sections are normally shaped via cold work manufacturing processes. The extent of cold work to shape the steel sections might induce residual stresses in the region of bending. Previously, researchers had performed studies on the influences of local buckling on the failure behavior of steel compression members which shown that failure will happen when most of the yielding has extended to the middle surface in the bend region of the sections. Therefore, these cold work methods may have major effect on the behavior of the steel section and also its load-bearing capability. In addition, another factor may play significant role in formed section's load-bearing capacity which is the longitudinal residual strain. The longitudinal residual strain raised during forming procedure can be used to define the section imperfection of the formed section and its relation to the existence of defects. Therefore, the main motivation of this research paper is to perform three-dimensional finite element (3D-FE) to investigate peak longitudinal residual strains of a thin-walled steel plate with large bending angle along member length. A 3D finite element simulation in ABAQUS has been employed to simulate this forming process. The study concluded that the longitudinal residual strain at the section corner edge was higher than those at the rest of the corner region. These strains at the edge were higher than the yield strain


    (



    ε


    y



    )


    of the formed section which occurred due to the lack of transverse restraint. This made the plate edge tended to bend toward the normal direction when it was under a high transverse bending. This causes a significant difference in longitudinal strain at the plate edge.
  18. Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
    Ilyas RA, Sapuan SM, Ishak MR
    Carbohydr Polym, 2018 Feb 01;181:1038-1051.
    PMID: 29253930 DOI: 10.1016/j.carbpol.2017.11.045
    Cellulose was extracted from sugar palm fibres (Arenga pinnata) by conducting delignification and mercerization treatments. Subsequently, sugar palm nanocrystalline celluloses (SPNCCs) were isolated from the extracted cellulose with 60wt% concentrated sulphuric acid. The chemical composition of sugar palm fibres were determined at different stages of treatment. Structural analysis was carried out by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Morphological analysis of extracted cellulose and isolated nanocrystalline cellulose (NCCs) was investigated by using field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The thermal stability of sugar palm fibres at different stages of treatment was investigated by thermogravimetric analysis (TGA). The results showed that lignin and hemicellulose were removed from the extracted cellulose through the delignification and mercerization process, respectively. The isolated SPNCCs were found to have length and diameters of 130±30nm and 9±1.96nm, respectively.
  19. Evaluation of Practicing sustainable Industrial Solid Waste Minimization by Manufacturing Firms in Malaysia: Strengths and Weaknesses
    Mallak SK, Bakri Ishak M, Mohamed AF
    J Air Waste Manag Assoc, 2016 Sep 13.
    PMID: 27624195 DOI: 10.1080/10962247.2016.1221366
    Malaysia is facing an increasing trend in industrial solid waste generation due to industrial development.Thus there is a paramount need in taking a serious action to move toward sustainable industrial waste management. The main aim of this study is to assess practicing solid waste minimization by manufacturing firms in Shah Alam industrial state, Malaysia. This paper presents a series of descriptive and inferential statistical analysis regarding the level and effects of practicing waste minimization methods, and seriousness of barriers preventing industries from practicing waste minimization methods. For this purpose the survey questions were designed such that both quantitative (questionnaire) and qualitative (semi-structures interview) data were collected concurrently. Analysis showed that, the majority of firms (92%) dispose their wastes rather than practice other sustainable waste management options. Also waste minimization methods such as segregation of wastes, on-site recycle and reuse, improve housekeeping and equipment modification were found to have significant contribution in waste reduction (p<0.05). Lack of expertise (M=3.50), lack of enough information (M= 3.54), lack of equipment modification (M= 3.16) and lack of specific waste minimization guidelines (M=3.49) have higher mean scores comparing with other barriers in different categories. These data were interpreted for elaborating of SWOT and TOWS matrix to highlight strengths, weaknesses, threats and opportunities. Accordingly, ten policies were recommended for improvement of practicing waste minimization by manufacturing firms as the main aim of this research. Implications This manuscript critically analysis waste minimization practices by manufacturing firms in Malaysia. Both qualitative and quantitative data collection and analysis were conducted to formulate SWOT and TOWS matrix in order to recommend policies and strategies for improvement of solid waste minimization by manufacturing industries. The results contribute to the knowledge and the findings of this study provide a useful baseline information and data on industrial solid waste generation and waste minimization practice.
  20. Fulltext Mechanical and thermal properties of natural fibre based hybrid composites: a review
    Zahra Dashtizadeh, Abdan, K., Jawaid, M., Mohd Asim Khan, Mohammad Behmanesh, Masoud Dashtizadeh, et al.
    Pertanika Journal of Science & Technology, 2017;25(4):1103-1122.
    MyJurnal
    Environmental issues have motivated researchers to replace synthetic fibres with natural fibres in the
    fabrication of polymer composites. However, natural fibres demonstrate weak mechanical or thermal
    properties which limit their different applications. Researchers have suggested fabrication of hybrid
    composites in order to improve the mechanical and thermal properties of natural fibre-based composites.
    Hybrid composites are made up by two or more fibres in one matrix or two polymer blends and with
    one natural fibre reinforcement. By hybridising one
    natural fibre with another natural fibre/synthetic
    fibre in one matrix, the resulting composite is a
    unique product (hybrid composites) that displays
    better mechanical and thermal properties in
    comparison with individual fibre-reinforced
    polymer composites. The advantages of developing
    hybrid composites are that they are more reliable
    for different applications and more environmental
    friendly. In this review paper, we present some
    recently published works related to mechanical
    and thermal properties of natural/natural fibres, and
    natural/synthetic fibre-based hybrid composites. Hybrid composites are one of the emerging fields in material science which has attracted attention for
    their different engineering applications.
Related Terms
    Try searching for something
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links