Displaying publications 21 - 35 of 35 in total

Abstract:
Sort:
  1. Fulltext High Cyclability Energy Storage Device with Optimized Hydroxyethyl Cellulose-Dextran-Based Polymer Electrolytes: Structural, Electrical and Electrochemical Investigations
    Azha MAS, Dannoun EMA, Aziz SB, Kadir MFZ, Zaki ZI, El-Bahy ZM, et al.
    Polymers (Basel), 2021 Oct 19;13(20).
    PMID: 34685361 DOI: 10.3390/polym13203602
    The preparation of a dextran (Dex)-hydroxyethyl cellulose (HEC) blend impregnated with ammonium bromide (NH4Br) is done via the solution cast method. The phases due to crystalline and amorphous regions were separated and used to estimate the degree of crystallinity. The most amorphous blend was discovered to be a blend of 40 wt% Dex and 60 wt% HEC. This polymer blend serves as the channel for ions to be conducted and electrodes separator. The conductivity has been optimized at (1.47 ± 0.12) × 10-4 S cm-1 with 20 wt% NH4Br. The EIS plots were fitted with EEC circuits. The DC conductivity against 1000/T follows the Arrhenius model. The highest conducting electrolyte possesses an ionic number density and mobility of 1.58 × 1021 cm-3 and 6.27 × 10-7 V-1s-1 cm2, respectively. The TNM and LSV investigations were carried out on the highest conducting system. A non-Faradic behavior was predicted from the CV pattern. The fabricated electrical double layer capacitor (EDLC) achieved 8000 cycles, with a specific capacitance, internal resistance, energy density, and power density of 31.7 F g-1, 80 Ω, 3.18 Wh kg-1, and 922.22 W kg-1, respectively.
  2. Fulltext The Study of Plasticized Amorphous Biopolymer Blend Electrolytes Based on Polyvinyl Alcohol (PVA): Chitosan with High Ion Conductivity for Energy Storage Electrical Double-Layer Capacitors (EDLC) Device Application
    Aziz SB, M Hadi J, Dannoun EMA, Abdulwahid RT, R Saeed S, Shahab Marf A, et al.
    Polymers (Basel), 2020 Aug 27;12(9).
    PMID: 32867191 DOI: 10.3390/polym12091938
    In this study, plasticized films of polyvinyl alcohol (PVA): chitosan (CS) based electrolyte impregnated with ammonium thiocyanate (NH4SCN) were successfully prepared using a solution-casting technique. The structural features of the electrolyte films were investigated through the X-ray diffraction (XRD) pattern. The enrichment of the amorphous phase with increasing glycerol concentration was confirmed by observing broad humps. The electrical impedance spectroscopy (EIS) portrays the improvement of ionic conductivity from 10-5 S/cm to 10-3 S/cm upon the addition of plasticizer. The electrolytes incorporated with 28 wt.% and 42 wt.% of glycerol were observed to be mainly ionic conductor as the ionic transference number measurement (TNM) was found to be 0.97 and 0.989, respectively. The linear sweep voltammetry (LSV) investigation indicates that the maximum conducting sample is stable up to 2 V. An electrolyte with the highest conductivity was used to make an energy storage electrical double-layer capacitor (EDLC) device. The cyclic voltammetry (CV) plot depicts no distinguishable peaks in the polarization curve, which means no redox reaction has occurred at the electrode/electrolyte interface. The fabricated EDLC displays the initial specific capacitance, equivalent series resistance, energy density, and power density of 35.5 F/g, 65 Ω, 4.9 Wh/kg, and 399 W/kg, respectively.
  3. Fulltext A Study of Methylcellulose Based Polymer Electrolyte Impregnated with Potassium Ion Conducting Carrier: Impedance, EEC Modeling, FTIR, Dielectric, and Device Characteristics
    Nofal MM, Hadi JM, Aziz SB, Brza MA, Asnawi ASFM, Dannoun EMA, et al.
    Materials (Basel), 2021 Aug 26;14(17).
    PMID: 34500952 DOI: 10.3390/ma14174859
    In this research, a biopolymer-based electrolyte system involving methylcellulose (MC) as a host polymeric material and potassium iodide (KI) salt as the ionic source was prepared by solution cast technique. The electrolyte with the highest conductivity was used for device application of electrochemical double-layer capacitor (EDLC) with high specific capacitance. The electrical, structural, and electrochemical characteristics of the electrolyte systems were investigated using various techniques. According to electrochemical impedance spectroscopy (EIS), the bulk resistance (Rb) decreased from 3.3 × 105 to 8 × 102 Ω with the increase of salt concentration from 10 wt % to 40 wt % and the ionic conductivity was found to be 1.93 ×10-5 S/cm. The dielectric analysis further verified the conductivity trends. Low-frequency regions showed high dielectric constant, ε' and loss, ε″ values. The polymer-salt complexation between (MC) and (KI) was shown through a Fourier transformed infrared spectroscopy (FTIR) studies. The analysis of transference number measurement (TNM) supported ions were predominantly responsible for the transport process in the MC-KI electrolyte. The highest conducting sample was observed to be electrochemically constant as the potential was swept linearly up to 1.8 V using linear sweep voltammetry (LSV). The cyclic voltammetry (CV) profile reveals the absence of a redox peak, indicating the presence of a charge double-layer between the surface of activated carbon electrodes and electrolytes. The maximum specific capacitance, Cs value was obtained as 118.4 F/g at the sweep rate of 10 mV/s.
  4. Fulltext Characteristics of Plasticized Lithium Ion Conducting Green Polymer Blend Electrolytes Based on CS: Dextran with High Energy Density and Specific Capacitance
    Dannoun EMA, Aziz SB, Abdullah SN, Nofal MM, Mahmoud KH, Murad AR, et al.
    Polymers (Basel), 2021 Oct 20;13(21).
    PMID: 34771170 DOI: 10.3390/polym13213613
    The solution cast process is used to set up chitosan: dextran-based plasticized solid polymer electrolyte with high specific capacitance (228.62 F/g) at the 1st cycle. Fourier-transform infrared spectroscopy (FTIR) pattern revealed the interaction between polymers and electrolyte components. At ambient temperature, the highest conductive plasticized system (CDLG-3) achieves a maximum conductivity of 4.16 × 10-4 S cm-1. Using both FTIR and electrical impedance spectroscopy (EIS) methods, the mobility, number density, and diffusion coefficient of ions are measured, and they are found to rise as the amount of glycerol increases. Ions are the primary charge carriers, according to transference number measurement (TNM). According to linear sweep voltammetry (LSV), the CDLG-3 system's electrochemical stability window is 2.2 V. In the preparation of electrical double layer capacitor devices, the CDLG-3 system was used. There are no Faradaic peaks on the cyclic voltammetry (CV) curve, which is virtually rectangular. Beyond the 20th cycle, the power density, energy density, and specific capacitance values from the galvanostatic charge-discharge are practically constant at 480 W/Kg, 8 Wh/Kg, and 60 F g-1, for 180 cycles.
  5. Menopausal hormone therapy and risk of venous thromboembolism: The story so far
    Abdelhafez MMA, Ahmed KAM, Ahmed NAM, Ismail MH, Daud MNM, Eldiasty AME, et al.
    Afr J Reprod Health, 2024 Mar 31;28(3):122-129.
    PMID: 38583076 DOI: 10.29063/ajrh2024/v28i3.13
    Menopausal hormone therapy (MHT) is known to increase the risk of venous thromboembolism (VTE), which includes deep vein thrombosis, pulmonary embolism, and less frequently cerebral vein thrombosis, but the absolute risk for a given patient is very low. After starting MHT, the risk of VTE seems to be at its highest, declining to the non-HRT user baseline level of risk after stopping. Whether estrogen-only or estrogen-progestin HRT combination is linked to a similar risk of VTE is unclear from the available evidence. The aim of this study is to evaluate the risks of developing VTE in relation to different types as well as different modes of administration of MHT through a database search including PubMed, MEDLINE, Google Scholar, Cochrane Library, and others in order to provide the women carers with the up-to-date and evidence-based guidelines and recommendations while counseling the post-menopausal women enquiring on use of hormonal therapies either to alleviate the menopausal symptoms or to prevent the long-term sequelae of estrogen deficiency.
  6. Fulltext The Study of Plasticized Solid Polymer Blend Electrolytes Based on Natural Polymers and Their Application for Energy Storage EDLC Devices
    Dannoun EMA, Aziz SB, Brza MA, M Nofal M, Asnawi ASFM, Yusof YM, et al.
    Polymers (Basel), 2020 Oct 29;12(11).
    PMID: 33138114 DOI: 10.3390/polym12112531
    In this work, plasticized magnesium ion-conducting polymer blend electrolytes based on chitosan:methylcellulose (CS:MC) were prepared using a solution cast technique. Magnesium acetate [Mg(CH3COO)2] was used as a source of the ions. Nickel metal-complex [Ni(II)-complex)] was employed to expand the amorphous phase. For the ions dissociation enhancement, glycerol plasticizer was also engaged. Incorporating 42 wt% of the glycerol into the electrolyte system has been shown to improve the conductivity to 1.02 × 10-4 S cm-1. X-ray diffraction (XRD) analysis showed that the electrolyte with the highest conductivity has a minimum crystallinity degree. The ionic transference number was estimated to be more than the electronic transference number. It is concluded that in CS:MC:Mg(CH3COO)2:Ni(II)-complex:glycerol, ions are the primary charge carriers. Results from linear sweep voltammetry (LSV) showed electrochemical stability to be 2.48 V. An electric double-layer capacitor (EDLC) based on activated carbon electrode and a prepared solid polymer electrolyte was constructed. The EDLC cell was then analyzed by cyclic voltammetry (CV) and galvanostatic charge-discharge methods. The CV test disclosed rectangular shapes with slight distortion, and there was no appearance of any redox currents on both anodic and cathodic parts, signifying a typical behavior of EDLC. The EDLC cell indicated a good cyclability of about (95%) for throughout of 200 cycles with a specific capacitance of 47.4 F/g.
  7. Fulltext Glycerolized Li+ Ion Conducting Chitosan-Based Polymer Electrolyte for Energy Storage EDLC Device Applications with Relatively High Energy Density
    Asnawi ASFM, B Aziz S, M Nofal M, Hamsan MH, Brza MA, Yusof YM, et al.
    Polymers (Basel), 2020 Jun 26;12(6).
    PMID: 32604910 DOI: 10.3390/polym12061433
    In this study, the solution casting method was employed to prepare plasticized polymer electrolytes of chitosan (CS):LiCO2CH3:Glycerol with electrochemical stability (1.8 V). The electrolyte studied in this current work could be established as new materials in the fabrication of EDLC with high specific capacitance and energy density. The system with high dielectric constant was also associated with high DC conductivity (5.19 × 10-4 S/cm). The increase of the amorphous phase upon the addition of glycerol was observed from XRD results. The main charge carrier in the polymer electrolyte was ion as tel (0.044) < tion (0.956). Cyclic voltammetry presented an almost rectangular plot with the absence of a Faradaic peak. Specific capacitance was found to be dependent on the scan rate used. The efficiency of the EDLC was observed to remain constant at 98.8% to 99.5% up to 700 cycles, portraying an excellent cyclability. High values of specific capacitance, energy density, and power density were achieved, such as 132.8 F/g, 18.4 Wh/kg, and 2591 W/kg, respectively. The low equivalent series resistance (ESR) indicated that the EDLC possessed good electrolyte/electrode contact. It was discovered that the power density of the EDLC was affected by ESR.
  8. Fulltext From Cellulose, Shrimp and Crab Shells to Energy Storage EDLC Cells: The Study of Structural and Electrochemical Properties of Proton Conducting Chitosan-Based Biopolymer Blend Electrolytes
    B Aziz S, H Hamsan M, M Nofal M, San S, Abdulwahid RT, Raza Saeed S, et al.
    Polymers (Basel), 2020 Jul 09;12(7).
    PMID: 32660095 DOI: 10.3390/polym12071526
    In this study, solid polymer blend electrolytes (SPBEs) based on chitosan (CS) and methylcellulose (MC) incorporated with different concentrations of ammonium fluoride (NH4F) salt were synthesized using a solution cast technique. Both Fourier transformation infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results confirmed a strong interaction and dispersion of the amorphous region within the CS:MC system in the presence of NH4F. To gain better insights into the electrical properties of the samples, the results of electrochemical impedance spectroscopy (EIS) were analyzed by electrical equivalent circuit (EEC) modeling. The highest conductivity of 2.96 × 10-3 S cm-1 was recorded for the sample incorporated with 40 wt.% of NH4F. Through transference number measurement (TNM) analysis, the fraction of ions was specified. The electrochemical stability of the electrolyte sample was found to be up to 2.3 V via the linear sweep voltammetry (LSV) study. The value of specific capacitance was determined to be around 58.3 F/g. The stability test showed that the electrical double layer capacitor (EDLC) system can be recharged and discharged for up to 100 cycles with an average specific capacitance of 64.1 F/g. The synthesized EDLC cell was found to exhibit high efficiency (90%). In the 1st cycle, the values of internal resistance, energy density and power density of the EDLC cell were determined to be 65 Ω, 9.3 Wh/kg and 1282 W/kg, respectively.
  9. Fulltext Implementation of Nutrigenetics and Nutrigenomics Research and Training Activities for Developing Precision Nutrition Strategies in Malaysia
    Dhanapal ACTA, Wuni R, Ventura EF, Chiet TK, Cheah ESG, Loganathan A, et al.
    Nutrients, 2022 Dec 01;14(23).
    PMID: 36501140 DOI: 10.3390/nu14235108
    Nutritional epidemiological studies show a triple burden of malnutrition with disparate prevalence across the coexisting ethnicities in Malaysia. To tackle malnutrition and related conditions in Malaysia, research in the new and evolving field of nutrigenetics and nutrigenomics is essential. As part of the Gene-Nutrient Interactions (GeNuIne) Collaboration, the Nutrigenetics and Nutrigenomics Research and Training Unit (N2RTU) aims to solve the malnutrition paradox. This review discusses and presents a conceptual framework that shows the pathway to implementing and strengthening precision nutrition strategies in Malaysia. The framework is divided into: (1) Research and (2) Training and Resource Development. The first arm collects data from genetics, genomics, transcriptomics, metabolomics, gut microbiome, and phenotypic and lifestyle factors to conduct nutrigenetic, nutrigenomic, and nutri-epigenetic studies. The second arm is focused on training and resource development to improve the capacity of the stakeholders (academia, healthcare professionals, policymakers, and the food industry) to utilise the findings generated by research in their respective fields. Finally, the N2RTU framework foresees its applications in artificial intelligence and the implementation of precision nutrition through the action of stakeholders.
  10. Fulltext Investigation of Ion Transport Parameters and Electrochemical Performance of Plasticized Biocompatible Chitosan-Based Proton Conducting Polymer Composite Electrolytes
    Hadi JM, Aziz SB, R Saeed S, Brza MA, Abdulwahid RT, Hamsan MH, et al.
    Membranes (Basel), 2020 Nov 21;10(11).
    PMID: 33233480 DOI: 10.3390/membranes10110363
    In this study, biopolymer composite electrolytes based on chitosan:ammonium iodide:Zn(II)-complex plasticized with glycerol were successfully prepared using the solution casting technique. Various electrical and electrochemical parameters of the biopolymer composite electrolytes' films were evaluated prior to device application. The highest conducting plasticized membrane was found to have a conductivity of 1.17 × 10-4 S/cm. It is shown that the number density, mobility, and diffusion coefficient of cations and anions fractions are increased with the glycerol amount. Field emission scanning electron microscope and Fourier transform infrared spectroscopy techniques are used to study the morphology and structure of the films. The non-Debye type of relaxation process was confirmed from the peak appearance of the dielectric relaxation study. The obtained transference number of ions (cations and anions) and electrons for the highest conducting sample were identified to be 0.98 and 0.02, respectively. Linear sweep voltammetry shows that the electrochemical stability of the highest conducting plasticized system is 1.37 V. The cyclic voltammetry response displayed no redox reaction peaks over its entire potential range. It was discovered that the addition of Zn(II)-complex and glycerol plasticizer improved the electric double-layer capacitor device performances. Numerous crucial parameters of the electric double-layer capacitor device were obtained from the charge-discharge profile. The prepared electric double-layer capacitor device showed that the initial values of specific capacitance, equivalence series resistance, energy density, and power density are 36 F/g, 177 Ω, 4.1 Wh/kg, and 480 W/kg, respectively.
  11. Fulltext Drawbacks of Low Lattice Energy Ammonium Salts for Ion-Conducting Polymer Electrolyte Preparation: Structural, Morphological and Electrical Characteristics of CS:PEO:NH4BF4-Based Polymer Blend Electrolytes
    Brza MA, Aziz SB, Nofal MM, Saeed SR, Al-Zangana S, Karim WO, et al.
    Polymers (Basel), 2020 Aug 21;12(9).
    PMID: 32825679 DOI: 10.3390/polym12091885
    In the present work it was shown that low lattice energy ammonium salts are not favorable for polymer electrolyte preparation for electrochemical device applications. Polymer blend electrolytes based on chitosan:poly(ethylene oxide) (CS:PEO) incorporated with various amounts of low lattice energy NH4BF4ammonium salt have been prepared using the solution cast technique. Both structural and morphological studies were carried out to understand the phenomenon of ion association. Sharp peaks appeared in X-ray diffraction (XRD) spectra of the samples with high salt concentration. The degree of crystallinity increased from 8.52 to 65.84 as the salt concentration increased up to 40 wt.%. These are correlated to the leakage of the associated anions and cations of the salt to the surface of the polymer. The structural behaviors were further confirmed by morphological study. The morphological results revealed the large-sized protruded salts at high salt concentration. Based on lattice energy of salts, the phenomena of salt leakage were interpreted. Ammonium salts with lattice energy lower than 600 kJ/mol are not preferred for polymer electrolyte preparation due to the significant tendency of ion association among cations and anions. Electrical impedance spectroscopy was used to estimate the conductivity of the samples. It was found that the bulk resistance increased from 1.1 × 104 ohm to 0.7 × 105 ohm when the salt concentration raised from 20 wt.% to 40 wt.%, respectively; due to the association of cations and anions. The low value of direct current (DC) conductivity (7.93 × 10-7 S/cm) addressed the non-suitability of the electrolytes for electrochemical device applications. The calculated values of the capacitance over the interfaces of electrodes-electrolytes (C2) were found to drop from 1.32 × 10-6 F to 3.13 × 10-7 F with increasing salt concentration. The large values of dielectric constant at low frequencies are correlated to the electrode polarization phenomena while their decrements with rising frequency are attributed to the lag of ion polarization in respect of the fast orientation of the applied alternating current (AC) field. The imaginary part of the electric modulus shows obvious peaks known as conduction relaxation peaks.
  12. Fulltext Nanogenerators as a Sustainable Power Source: State of Art, Applications, and Challenges
    Sripadmanabhan Indira S, Aravind Vaithilingam C, Oruganti KSP, Mohd F, Rahman S
    Nanomaterials (Basel), 2019 May 20;9(5).
    PMID: 31137520 DOI: 10.3390/nano9050773
    A sustainable power source to meet the needs of energy requirement is very much essential in modern society as the conventional sources are depleting. Bioenergy, hydropower, solar, and wind are some of the well-established renewable energy sources that help to attain the need for energy at mega to gigawatts power scale. Nanogenerators based on nano energy are the growing technology that facilitate self-powered systems, sensors, and flexible and portable electronics in the booming era of IoT (Internet of Things). The nanogenerators can harvest small-scale energy from the ambient nature and surroundings for efficient utilization. The nanogenerators were based on piezo, tribo, and pyroelectric effect, and the first of its kind was developed in the year 2006 by Wang et al. The invention of nanogenerators is a breakthrough in the field of ambient energy-harvesting techniques as they are lightweight, easily fabricated, sustainable, and care-free systems. In this paper, a comprehensive review on fundamentals, performance, recent developments, and application of nanogenerators in self-powered sensors, wind energy harvesting, blue energy harvesting, and its integration with solar photovoltaics are discussed. Finally, the outlook and challenges in the growth of this technology are also outlined.
  13. Peripartum hysterectomy clinical characteristics and outcomes- a hospital based retrospective audit study
    Nor AM, Jagdeesh K, Mohd FAS, Kamraul AK, Yusmadi A, Noraslawati R, et al.
    Med J Malaysia, 2023 Nov;78(6):756-762.
    PMID: 38031217
    INTRODUCTION: The study aims to evaluate and report on the clinical characteristics, incidence, risk factors and associated complications of emergency and planned peripartum hysterectomy in a single training and research tertiary health care centre in Malaysia.

    MATERIALS AND METHODS: We conducted a 6-year retrospective cross-sectional study from the 1st January 2016 until 31st December 2021. Clinical, demographic characteristics, perioperative parameters, operative indications, blood loss, maternal/neonatal outcomes and complications were analysed. Patients were subdivided, analysed and studied in two subgroups- emergency hysterectomy (EH) and planned hysterectomy (PH).

    RESULTS: There were 65 cases of peripartum hysterectomy out of total 100,567 deliveries, with a prevalence rate of 0.06%. Overall, the majority of patients were multiparous (96.9%), having previous caesarean scar (73.8%) or diagnosed with placenta praevia (75.4%). More than half of the total patients (61.5%) have both previous caesarean scar and concomitant placenta praevia. EH was carried out in 39(60%) patients while 26(40%) patients underwent PH. The only indication for surgery in the PH group (100%) was abnormal placentation while the most common indication for surgery in the EH group (53.8%) was postpartum haemorrhage related to abnormal placentation. Patients who underwent EH were more likely to have massive blood loss (p=0.001), require ICU admissions (p=0.001), have DIVC cycles transfused (mean [SD] regime: 1.35 [0.95] vs 0.54 [0.99]; p=0.002), have lower postoperative haemoglobin level (mean [standard deviation, SD] haemoglobin: 9.23g/l [SD1.8] vs. 10.8 g/l [SD1.86]; p=0.001) and have higher difference between pre/post operative haemoglobin level (mean [SD] haemoglobin difference: 1.78g/l [SD6.34] vs 0.32g/l [SD1.7]; p=0.008) compared to patients with PH. Red blood cell transfusion, operating time, length of stay, weight of babies and Apgar score between two groups showed no significant differences. A significant reduction of blood loss between the first and the second half duration of the study (mean [SD] blood loss: 6978 ml [SD 4999.45] vs. 4100ml [SD2569.48]; p=0.004) was also observed. In the emergency group, 'non-placental cause' EH required significantly more red blood cell transfusion than 'placental cause' (p<0.05) while in the PH group, no significant difference was observed between the occlusive internal iliac artery 'balloon' and 'no balloon' subgroup in terms of operating time, total blood loss or blood transfusion. Overall complications showed more cases of post operative fever and relaparotomy in the EH group (18.4% vs. 7.6%) while urinary tract injuries including injuries to bladder and ureter occurred only in the PH group (9.4% vs. 0%).

    CONCLUSION: The majority of peripartum hysterectomy cases are due to placenta accreta spectrum disorders. Planned peripartum hysterectomies have a lower morbidity rate compared to emergency hysterectomies. Therefore, early identification of placenta accreta spectrum disorders and timely planning for elective procedures are crucial to minimise the need for emergency surgery.

  14. Fulltext Prevalence and Antimicrobial Susceptibility of Vibrio parahaemolyticus Isolated from Short Mackerels (Rastrelliger brachysoma) in Malaysia
    Tan CW, Malcolm TTH, Kuan CH, Thung TY, Chang WS, Loo YY, et al.
    Front Microbiol, 2017;8:1087.
    PMID: 28659901 DOI: 10.3389/fmicb.2017.01087
    Numerous prevalence studies and outbreaks of Vibrio parahaemolyticus infection have been extensively reported in shellfish and crustaceans. Information on the quantitative detection of V. parahaemolyticus in finfish species is limited. In this study, short mackerels (Rastrelliger brachysoma) obtained from different retail marketplaces were monitored with the presence of total and pathogenic strains of V. parahaemolyticus. Out of 130 short mackerel samples, 116 (89.2%) were detected with the presence of total V. parahaemolyticus and microbial loads of total V. parahaemolyticus ranging from <3 to >10(5) MPN/g. Prevalence of total V. parahaemolyticus was found highest in wet markets (95.2%) followed by minimarkets (89.1%) and hypermarkets (83.3%). Pathogenic V. parahaemolyticus strains (tdh+ and/or trh+) were detected in 16.2% (21 of 130) of short mackerel samples. The density of tdh+ V. parahaemolyticus strains were examined ranging from 3.6 to >10(5) MPN/g and microbial loads of V. parahaemolyticus strains positive for both tdh and trh were found ranging from 300 to 740 MPN/g. On the other hand, antibiotic susceptibility profiles of V. parahaemolyticus strains isolated from short mackerels were determined through disc diffusion method in this study. Assessment of antimicrobial susceptibility profile of V. parahaemolyticus revealed majority of the isolates were highly susceptible to ampicillin sulbactam, meropenem, ceftazidime, and imipenem, but resistant to penicillin G and ampicillin. Two isolates (2.99%) exhibited the highest multiple antibiotic resistance (MAR) index value of 0.41 which shown resistance to 7 antibiotics. Results of the present study demonstrated that the occurrence of pathogenic V. parahaemolyticus strains in short mackerels and multidrug resistance of V. parahaemolyticus isolates could be a potential public health concerns to the consumer. Furthermore, prevalence data attained from the current study can be further used to develop a microbial risk assessment model to estimate health risks associated with the consumption of short mackerels contaminated with pathogenic V. parahaemolyticus.
  15. Fulltext What information and the extent of information research participants need in informed consent forms: a multi-country survey
    Karbwang J, Koonrungsesomboon N, Torres CE, Jimenez EB, Kaur G, Mathur R, et al.
    BMC Med Ethics, 2018 09 15;19(1):79.
    PMID: 30219106 DOI: 10.1186/s12910-018-0318-x
    BACKGROUND: The use of lengthy, detailed, and complex informed consent forms (ICFs) is of paramount concern in biomedical research as it may not truly promote the rights and interests of research participants. The extent of information in ICFs has been the subject of debates for decades; however, no clear guidance is given. Thus, the objective of this study was to determine the perspectives of research participants about the type and extent of information they need when they are invited to participate in biomedical research.

    METHODS: This multi-center, cross-sectional, descriptive survey was conducted at 54 study sites in seven Asia-Pacific countries. A modified Likert-scale questionnaire was used to determine the importance of each element in the ICF among research participants of a biomedical study, with an anchored rating scale from 1 (not important) to 5 (very important).

    RESULTS: Of the 2484 questionnaires distributed, 2113 (85.1%) were returned. The majority of respondents considered most elements required in the ICF to be 'moderately important' to 'very important' for their decision making (mean score, ranging from 3.58 to 4.47). Major foreseeable risk, direct benefit, and common adverse effects of the intervention were considered to be of most concerned elements in the ICF (mean score = 4.47, 4.47, and 4.45, respectively).

    CONCLUSIONS: Research participants would like to be informed of the ICF elements required by ethical guidelines and regulations; however, the importance of each element varied, e.g., risk and benefit associated with research participants were considered to be more important than the general nature or technical details of research. Using a participant-oriented approach by providing more details of the participant-interested elements while avoiding unnecessarily lengthy details of other less important elements would enhance the quality of the ICF.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links