Displaying publications 21 - 40 of 50 in total

Abstract:
Sort:
  1. Naji GA, Omar RA, Yahya R
    J Mech Behav Biomed Mater, 2017 03;67:135-143.
    PMID: 28006713 DOI: 10.1016/j.jmbbm.2016.12.007
    In all-ceramic systems, a high incidence of veneer chip-off has been reported in clinical studies. Coefficient of thermal expansion (CTE) behaviour is one of the factors that may increase residual stress in the interface and influence the veneer/core bond strength. Therefore, this study aimed to evaluate the effect of sodalite zeolite-infiltration on the CTE behaviour and bond strength of different all-ceramic prostheses. The case-study groups were synthesized sodalite zeolite-infiltrated alumina (IA-SOD) and synthesized sodalite zeolite-infiltrated zirconia-toughened alumina (ZTA) (IZ-SOD), while the control groups were glass-infiltrated alumina (IA-glass) and glass-infiltrated ZTA (IZ-glass). Forty cylindrical-shaped samples measuring 5 mm in diameter and 10 mm in height were tested for CTE using a thermo-mechanical analyser machine, and forty disc-shaped ceramic samples measuring 12 mm in diameter and 1.2 ± 0.2 mm in thickness were prepared using specially designed stainless steel split mould and veneered by cylinder-shaped (2 mm high × 2 mm diameter) low-fusing porcelain (Vita VM7). The veneer/core samples were sintered and tested for shear bond strength using a high precision universal testing machine. Scanning electron microscope, stereo microscope, atomic force microscope, and energy-dispersive X-ray spectroscopy were used to investigate the structural characteristics of samples at the fracture surface. The collected data were analyzed with a one-way ANOVA and Tukey HSD test (α=.05). IZ-SOD revealed highest CTE and shear bond strength values, while the IA-glass revealed the lowest values than the other groups. There was no significant difference in CTE and bond strength among IZ-SOD, IA-SOD and IZ-glass samples (p>0.05). The experimental SOD zeolite-infiltrated samples revealed higher CTE mismatch and bond strength along with a more favourable mode of failure than did the commercial glass-infiltrated samples. Sandblast technique is considered as effective conditioning procedure for enhancing the surface roughness of SOD zeolite-infiltrated frameworks which subsequently improving the bond strength.
  2. Naeem R, Ali Ehsan M, Yahya R, Sohail M, Khaledi H, Mazhar M
    Dalton Trans, 2016 Oct 14;45(38):14928-39.
    PMID: 27549401 DOI: 10.1039/c6dt02656g
    Pristine Mn2O3 and Ag-Mn2O3 composite thin films have been developed on fluorine doped tin oxide (FTO) coated glass substrates at 450 °C by aerosol assisted chemical vapor deposition (AACVD) using a methanol solution of a 1 : 2 mixture of acetatoargentate(i), Ag(CH3COO), and a newly synthesized manganese complex, [Mn(dmae)2(TFA)4] (1) (dmae = N,N-dimethylaminoethanolate, TFA = trifluoroacetate). The phase purity and stoichiometric composition of the films were investigated by X-ray diffraction (XRD) and Raman spectroscopy techniques. Energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses revealed a Ag to Mn ratio of 1 : 2 and further confirmed the uniform dispersion of Ag nanoparticles into the Mn2O3 structure. Optical studies showed a direct band gap of 2.0 eV for the pristine Mn2O3 film that was lowered to 1.8 eV for Ag-Mn2O3 due to the plasmonic interaction of Ag with Mn2O3. The Ag-Mn2O3 composite film displayed enhanced photocatalytic activity in photoelectrochemical (PEC) water splitting and yielded a photocurrent of 3 mA cm(-2) at 0.7 V versus Ag/AgCl which was 1.6 times higher than a pristine Mn2O3 film alone, under AM 1.5 G illumination (100 mW cm(-2)). The high PEC efficiency is mainly due to the plasmonic effect of Ag nanoparticles, which enhances the visible light absorption, efficient electron-hole separation and high carrier mobility of the Ag-Mn2O3 photoelectrode. The charge carrier density of Ag-Mn2O3 is two times higher than the pristine Mn2O3 as calculated by the Mott-Schottky plot. Based on the PEC studies a mechanism is proposed to elucidate the high activity of Ag-Mn2O3 in PEC water splitting.
  3. Mansoor MA, Ismail A, Yahya R, Arifin Z, Tiekink ER, Weng NS, et al.
    Inorg Chem, 2013 May 20;52(10):5624-6.
    PMID: 23627942 DOI: 10.1021/ic302772b
    Perovskite-structured lead titanate thin films have been grown on FTO-coated glass substrates from a single-source heterometallic molecular complex, [PbTi(μ2-O2CCF3)4(THF)3(μ3-O)]2 (1), which was isolated in quantitative yield from the reaction of tetraacetatolead(IV), tetrabutoxytitanium(IV), and trifluoroacetic acid from a tetrahydrofuran solution. Complex 1 has been characterized by physicochemical methods such as melting point, microanalysis, FTIR, (1)H and (19)F NMR, thermal analysis, and single-crystal X-ray diffraction (XRD) analysis. Thin films of lead titanate having spherical particles of various sizes have been grown from 1 by aerosol-assisted chemical vapor deposition at 550 °C. The thin films have been characterized by powder XRD, scanning electron microscopy, and energy-dispersive X-ray analysis. An optical band gap of 3.69 eV has been estimated by UV-visible spectrophotometry.
  4. Mahmoodian R, Yahya R, Dabbagh A, Hamdi M, Hassan MA
    PLoS One, 2015;10(12):e0144632.
    PMID: 26641651 DOI: 10.1371/journal.pone.0144632
    A novel method is proposed to study the behavior and phase formation of a Si+C compacted pellet under centrifugal acceleration in a hybrid reaction. Si+C as elemental mixture in the form of a pellet is embedded in a centrifugal tube. The pellet assembly and tube are exposed to the sudden thermal energy of a thermite reaction resulted in a hybrid reaction. The hybrid reaction of thermite and Si+C produced unique phases. X-ray diffraction pattern (XRD) as well as microstructural and elemental analyses are then investigated. XRD pattern showed formation of materials with possible electronic and magnetic properties. The cooling rate and the molten particle viscosity mathematical model of the process are meant to assist in understanding the physical and chemical phenomena took place during and after reaction. The results analysis revealed that up to 85% of materials converted into secondary products as ceramics-matrix composite.
  5. M Zawawi SM, Yahya R, Hassan A, Mahmud HN, Daud MN
    Chem Cent J, 2013;7(1):80.
    PMID: 23634962 DOI: 10.1186/1752-153X-7-80
    Metal tungstates have attracted much attention due to their interesting structural and photoluminescence properties. Depending on the size of the bivalent cation present, the metal tungstates will adopt structures with different phases. In this work, three different phases of metal tungstates MWO4 (M= Ba, Ni and Bi) were synthesized via the sucrose templated method.
  6. Loke SC, Kanesvaran R, Yahya R, Fisal L, Wong TW, Loong YY
    Ann Acad Med Singap, 2009 Dec;38(12):1074-80.
    PMID: 20052443
    INTRODUCTION: Intravenous calcium gluconate has been used to prevent postoperative hypocalcaemia (POH) following parathyroidectomy for secondary hyperparathyroidism in chronic kidney disease (CKD).

    MATERIALS AND METHODS: Retrospective data were obtained for 36 patients with CKD stage 4 and 5 after parathyroid surgery, correlating albumin-corrected serum calcium with the infusion rate of calcium gluconate. Calcium flux was characterised along with excursions out of the target calcium range of 2 to 3 mmol/L. With this data, an improved titration regimen was constructed.

    RESULTS: Mean peak efflux rate (PER) from the extracellular calcium pool was 2.97 mmol/h occurring 26.6 hours postoperatively. Peak calcium efflux tended to occur later in cases of severe POH. Eighty-one per cent of patients had excursions outside of the target calcium range of 2 to 3 mmol/L. Mean time of onset for hypocalcaemia was 2 days postoperatively. Hypocalcaemia was transient in 25% and persistent in 11% of patients.

    CONCLUSION: A simple titration regimen was constructed in which a 10% calcium gluconate infusion was started at 4.5 mL/h when serum calcium was <2 mmol/L, then increased to 6.5 mL/h and finally to 9.0 mL/h if calcium continued falling. Preoperative oral calcium and calcitriol doses were maintained. Blood testing was done 6-hourly, but when a higher infusion rate was needed, 4-hourly blood testing was preferred. Monitoring was discontinued if no hypocalcaemia developed in the fi rst 4 days after surgery. If hypocalcaemia persisted 6 days after surgery, then the infusion was stopped with further monitoring for 24 hours.

  7. Lim CK, Lim JH, Ibrahim I, Chan YM, Zakaria NF, Yahya R, et al.
    Diagnostics (Basel), 2021 Sep 23;11(10).
    PMID: 34679443 DOI: 10.3390/diagnostics11101745
    Protein-energy wasting (PEW) is a devastating metabolic derangement that leads to increased morbidity and mortality in hemodialysis (HD) patients. This study aimed to determine the diagnostic test accuracy of bioelectrical impedance analysis derived-phase angle (PhA) in detecting PEW among HD patients. This was a multi-centre, cross-sectional study conducted amongst 152 multi-ethnic HD patients in Klang Valley, Malaysia. PEW was assessed using the International Society of Renal Nutrition and Metabolism criteria as the reference method. PhA was measured using a multi-frequency bioelectrical impedance spectroscopy at 50 kHz. Multiple and logistic regressions were used to determine factors associated with PhA and PEW diagnosis, respectively. A receiver operating characteristics curve analysis was used to establish the gender-specific PhA cut-offs to detect PEW. PEW existed in 21.1% of the HD patients. PhA was found as an independent predictor of PEW (adjOR = 0.308, p = 0.001), with acceptable to excellent discriminative performance (adjAUCmale = 0.809; adjAUCfemale = 0.719). Male patients had higher PhA cut-off compared to female patients (4.26° vs. 3.30°). We concluded that PhA is a valid and pragmatic biomarker to detect PEW in multi-ethnic Malaysian HD patients and a gender-specific cut-off is necessary, attributed to the gender differences in body composition.
  8. Leong ST, Liew SY, Khaw KY, Ahmad Hassali H, Richomme P, Derbré S, et al.
    Bioorg Chem, 2023 Dec;141:106859.
    PMID: 37742494 DOI: 10.1016/j.bioorg.2023.106859
    A bio-assay guided fractionation strategy based on cholinesterase assay combined with 13C NMR-based dereplication was used to identify active metabolites from the bark of Mesua lepidota. Eight compounds were identified with the aid of the 13C NMR-based dereplication software, MixONat, i.e., sitosterol (1), stigmasterol (2), α-amyrin (3), friedelin (6), 3β-friedelinol (7), betulinic acid (9), lepidotol A (10) and lepidotol B (11). Further bio-assay guided isolation of active compounds afforded one xanthone, pyranojacareubin (12) and six coumarins; lepidotol A (10), lepidotol B (11), lepidotol E (13), lepidotin A (14), and lepidotin B (15), including a new Mammea coumarin, lepidotin C (16). All the metabolites showed strong to moderate butyrylcholinesterase (BChE) inhibition. Lepidotin B (15) exhibited the most potent inhibition towards BChE with a mix-mode inhibition profile and a Ki value of 1.03 µM. Molecular docking and molecular dynamics simulations have revealed that lepidotin B (15) forms stable interactions with key residues within five critical regions of BChE. These regions encompass residues Asp70 and Tyr332, the acyl hydrophobic pocket marked by Leu286, the catalytic triad represented by Ser198 and His438, the oxyanion hole (OH) constituted by Gly116 and Gly117, and the choline binding site featuring Trp82. To gauge the binding strength of lepidotin B (15) and to pinpoint pivotal residues at the binding interface, free energy calculations were conducted using the Molecular Mechanics Generalized Born Surface Area (MM-GBSA) approach. This analysis not only predicted a favourable binding affinity for lepidotin B (15) but also facilitated the identification of significant residues crucial for the binding interaction.
  9. Khor BH, Chinna K, Abdul Gafor AH, Morad Z, Ahmad G, Bavanandam S, et al.
    BMC Health Serv Res, 2018 Dec 04;18(1):939.
    PMID: 30514284 DOI: 10.1186/s12913-018-3702-9
    BACKGROUND: This study aimed to assess the situational capacity for nutrition care delivery in the outpatient hemodialysis (HD) setting in Malaysia by evaluating dietitian accessibility, nutrition practices and patients' outcomes.

    METHODS: A 17-item questionnaire was developed to assess nutrition practices and administered to dialysis managers of 150 HD centers, identified through the National Renal Registry. Nutritional outcomes of 4362 patients enabled crosscutting comparisons as per dietitian accessibility and center sector.

    RESULTS: Dedicated dietitian (18%) and visiting/shared dietitian (14.7%) service availability was limited, with greatest accessibility at government centers (82.4%) > non-governmental organization (NGO) centers (26.7%) > private centers (15.1%). Nutritional monitoring varied across HD centers as per albumin (100%) > normalized protein catabolic rate (32.7%) > body mass index (BMI, 30.7%) > dietary intake (6.0%). Both sector and dietitian accessibility was not associated with achieving albumin ≥40 g/L. However, NGO centers were 36% more likely (p = 0.030) to achieve pre-dialysis serum creatinine ≥884 μmol/L compared to government centers, whilst centers with dedicated dietitian service were 29% less likely (p = 0.017) to achieve pre-dialysis serum creatinine ≥884 μmol/L. In terms of BMI, private centers were 32% more likely (p = 0.022) to achieve BMI ≥ 25.0 kg/m2 compared to government centers. Private centers were 62% less likely (p 

  10. Huang XD, Liang JB, Tan HY, Yahya R, Long R, Ho YW
    J Agric Food Chem, 2011 Oct 12;59(19):10677-82.
    PMID: 21899359 DOI: 10.1021/jf201925g
    Depending on their source, concentration, chemical structure, and molecular weight, condensed tannins (CTs) form insoluble complexes with protein, which could lead to ruminal bypass protein, benefiting animal production. In this study, CTs from Leuceana leucocephala hybrid were fractionated into five fractions by a size exclusion chromatography procedure. The molecular weights of the CT fractions were determined using Q-TOF LC-MS, and the protein-binding affinities of the respective CT fractions were determined using a protein precipitation assay with bovine serum albumin (BSA) as the standard protein. The calculated number-average molecular weights (M(n)) were 1348.6, 857.1, 730.1, 726.0, and 497.1, and b values (the b value represents the CT quantity that is needed to bind half of the maximum precipitable BSA) of the different molecular weight fractions were 0.381, 0.510, 0.580, 0.636, and 0.780 for fractions 1, 2, 3, 4, and 5, respectively. The results indicated that, in general, CTs of higher molecular weight fractions have stronger protein-binding affinity than those of lower molecular weights. However, the number of hydroxyl units within the structure of CT polymers also affects the protein-binding affinity.
  11. Hassan MRA, Chan HK, Nordin M, Yahya R, Sulaiman WRW, Merican SAA, et al.
    Harm Reduct J, 2023 Apr 12;20(1):48.
    PMID: 37046294 DOI: 10.1186/s12954-023-00780-3
    BACKGROUND: Despite advancements in hepatitis C virus (HCV) treatment, low uptake among hard-to-reach populations remains a global issue. The current study aimed to assess the feasibility of a modified same-day test-and-treat model in improving HCV care for people who inject drugs (PWID) living in resource-constrained rural areas.

    METHODS: A pilot study was conducted in four primary healthcare (PHC) centers in Malaysia. The model's key features included on-site HCV ribonucleic acid (RNA) testing using a shared GeneXpert® system; noninvasive biomarkers for cirrhosis diagnosis; and extended care to PWID referred from nearby PHC centers and outreach programs. The feasibility assessment focused on three aspects of the model: demand (i.e., uptake of HCV RNA testing and treatment), implementation (i.e., achievement of each step in the HCV care cascade), and practicality (i.e., ability to identify PWID with HCV and expedite treatment initiation despite resource constraints).

    RESULTS: A total of 199 anti-HCV-positive PWID were recruited. They demonstrated high demand for HCV care, with a 100% uptake of HCV RNA testing and 97.4% uptake of direct-acting antiviral treatment. The rates of HCV RNA positivity (78.4%) and sustained virologic response (92.2%) were comparable to standard practice, indicating the successful implementation of the model. The model was also practical, as it covered non-opioid-substitution-therapy-receiving individuals and enabled same-day treatment in 71.1% of the participants.

    CONCLUSIONS: The modified same-day test-and-treat model is feasible in improving HCV care for rural PWID. The study finding suggests its potential for wider adoption in HCV care for hard-to-reach populations.

  12. Hammed WA, Rahman MS, Mahmud HNME, Yahya R, Sulaiman K
    Des Monomers Polym, 2017;20(1):368-377.
    PMID: 29491808 DOI: 10.1080/15685551.2016.1271086
    A soluble poly (n-vinyl carbazole)-polypyrrole (PNVC-Ppy) copolymer was prepared through oxidative chemical polymerization wherein dodecyl benzene sulfonic acid (DBSA) was used as a dopant to facilitate polymer-organic solvent interaction and ammonium persulfate (APS) was used as an oxidant. Compared with undoped PNVC-Ppy, the DBSA-doped PNVC-Ppy copolymer showed higher solubility in some selected organic solvents. The composition and structural characteristics of the DBSA-doped PNVC-Ppy were determined by Fourier transform infrared, ultraviolet-visible, and X-ray diffraction spectroscopic methods. Field emission scanning electron microscopic method was employed to observe the morphology of the DBSA-doped PNVC-Ppy copolymer. The electrical conductivity of the DBSA-doped PNVC-Ppy copolymer was measured at room temperature. The conductivity increased with increasing concentration of APS oxidant, and the highest conductivity was recorded at 0.004 mol/dm3APS at a polymerization temperature of -5 °C. The increased conductivity can be explained by the extended half-life of pyrrole free radical at a lower temperature and a gradual increase in chain length over a prolonged time due to the slow addition of APS. Furthermore, the obtained soluble copolymer exhibits unique optical and thermal properties different from those of PNVC and Ppy.
  13. Gan CC, Jalalonmuhali M, Nordin NZ, Abdul Wahab MZ, Yahya R, Ng KP, et al.
    Transplant Proc, 2021 Apr;53(3):856-864.
    PMID: 33487455 DOI: 10.1016/j.transproceed.2020.10.038
    Malaysia has a low deceased-donor donation rate and has not embarked on a paired kidney exchange program; therefore, ABO-incompatible and HLA-incompatible transplantation remain the main contributor to the sustainability of the national kidney transplantation (KT) program. There were 26 cases of ABO-incompatible KTs performed from 2011 to 2018 in 3 major transplant centers, namely, Hospital Kuala Lumpur, University Malaya Medical Centre, and Prince Court Medical Centre. We collected perioperative and follow-up data through June 2019. The desensitization protocol varies and is center specific: the localized Japanese protocol and Swedish protocol with a target anti-A/B isoagglutinin titer of 16 or 32 on the day of transplant. The induction and tacrolimus-based maintenance protocol was nearly identical. The median follow-up time was 62.3 months (interquartile range, 37.0-79.7). Fifteen subjects had the highest predesensitization anti-A/B titer of ≥32 (57.7%). The acute cellular rejection and antibody-mediated rejection incidence were 12.5% (3 cases) and 8.3% (2 cases), respectively. Patient, graft, and death-censored graft survival rates were 96.2%, 92.3%, and 96.0%, respectively, 1 year post-living-donor KT (LDKT) and 96.2%, 87.2%, and 90.7%, respectively, 5 years post-LDKT. Our experience shows that ABO-incompatible LDKT using a suitable desensitization technique could be a safe and feasible choice for LDKT even with varied desensitization regimens for recipients with relatively high baseline isoagglutinin titers.
  14. Farhan N, Al-Maleki AR, Sarih NM, Yahya R
    Bioorg Chem, 2023 Nov;140:106786.
    PMID: 37586131 DOI: 10.1016/j.bioorg.2023.106786
    Recent studies show that some metal ions, injure microbial cells in various ways due to membrane breakdown, protein malfunction, and oxidative stress. Metal complexes are suited for creating novel antibacterial medications due to their distinct mechanisms of action and the variety of three-dimensional geometries they can acquire. In this Perspective, the present study focused on new antibacterial strategies based on metal oleoyl amide complexes. Thus, oleoyl amides ligand (fatty hydroxamic acid and fatty hydrazide hydrate) with the transition metal ions named Ag (I), Co (II), Cu (II), Ni (II) and Sn (II) complexes were successfully synthesized in this study. The metals- oleoyl amide were characterized using elemental analysis, and fourier transforms infrared (FTIR) spectroscopy. The antibacterial effect of metals- oleoyl amide complexes was investigated for Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by analysing minimum inhibitory concentration (MIC), minimal bactericidal concentration (MBC), and scanning electron microscopy (SEM). The results showed that metal-oleoyl amide complexes have high antibacterial activity at low concentrations. This study inferred that metal oleoyl amide complexes could be utilised as a promising therapeutic antibacterial agent.
  15. Farhan N, Rageh Al-Maleki A, Ataei S, Muhamad Sarih N, Yahya R
    Bioorg Chem, 2023 Jun;135:106511.
    PMID: 37027951 DOI: 10.1016/j.bioorg.2023.106511
    Medication products from natural materials are preferred due to their minimal side effects. Extra-virgin olive oil (EVOO) is a highly acclaimed Mediterranean diet and a common source of lipids that lowers morbidity and disease severity. This study synthesised two fatty amides from EVOO: hydroxamic fatty acids (FHA) and fatty hydrazide hydrate (FHH). The Density Functional Theory (DFT) was applied to quantum mechanics computation. Nuclear magnetic resonance (NMR), Fourier transforms infrared (FTIR), and element analysis were used to characterise fatty amides. Likewise, the minimum inhibitory concentration (MIC) and timing kill assay were determined. The results revealed that 82 % for FHA and 80 % for FHH conversion were achieved. The amidation reagent/EVOO ratio (mmol: mmol) was 7:1, using the reaction time of 12 h and hexane as an organic solvent. The results further revealed that fatty amides have high antibacterial activity with low concentration at 0.04 μg/mL during eight h of FHA and 0.3 μg/mL during ten h of FHH. This research inferred that FHA and FHH could provide an alternative and effective therapeutic strategy for bacterial diseases. Current findings could provide the basis for the modernisation/introduction of novel and more effective antibacterial drugs derived from natural products.
  16. Dendooven A, Peetermans H, Helbert M, Nguyen TQ, Marcussen N, Nagata M, et al.
    BMC Nephrol, 2021 05 24;22(1):193.
    PMID: 34030637 DOI: 10.1186/s12882-021-02365-3
    BACKGROUND: Kidney biopsy registries all over the world benefit research, teaching and health policy. Comparison, aggregation and exchange of data is however greatly dependent on how registration and coding of kidney biopsy diagnoses are performed. This paper gives an overview over kidney biopsy registries, explores how these registries code kidney disease and identifies needs for improvement of coding practice.

    METHODS: A literature search was undertaken to identify biopsy registries for medical kidney diseases. These data were supplemented with information from personal contacts and from registry websites. A questionnaire was sent to all identified registries, investigating age of registries, scope, method of coding, possible mapping to international terminologies as well as self-reported problems and suggestions for improvement.

    RESULTS: Sixteen regional or national kidney biopsy registries were identified, of which 11 were older than 10 years. Most registries were located either in Europe (10/16) or in Asia (4/16). Registries most often use a proprietary coding system (12/16). Only a few of these coding systems were mapped to SNOMED CT (1), older SNOMED versions (2) or ERA-EDTA PRD (3). Lack of maintenance and updates of the coding system was the most commonly reported problem.

    CONCLUSIONS: There were large gaps in the global coverage of kidney biopsy registries. Limited use of international coding systems among existing registries hampers interoperability and exchange of data. The study underlines that the use of a common and uniform coding system is necessary to fully realize the potential of kidney biopsy registries.

  17. Boey CY, Yee SY, Amir Hassan SZ, Yahya R, Hashim H
    Transplant Proc, 2022 Jan 24.
    PMID: 35086676 DOI: 10.1016/j.transproceed.2021.12.016
    INTRODUCTION: Accurate assessment of renal graft function in the early post-transplant period is crucial, as it influences clinical management and graft prognostication. However, there are limitations in current available modalities. MAG3 scintigraphy could contribute vital information on graft function.

    OBJECTIVES: This study aimed to determine the predictive value of parameters derived from MAG3 performed within 72 hours post transplant in detecting graft function. Delayed graft function (DGF), which is defined as dialysis requirement within the first week post transplant, is chosen as a surrogate measure of graft function.

    METHODOLOGY: All renal transplant recipients who underwent MAG3 within 72 hours post transplant from 2017 to 2019 were enrolled. Three MAG3 parameters, renogram grade, tubular injury severity score, and R20:3, were evaluated.

    RESULTS: A total of 117 patients were enrolled. The overall incidence of DGF was 16.2% with a significantly higher incidence amongst cadaveric graft recipients (53.6%) compared with living graft recipients (4.5%). Renogram grade ≥2, tubular injury severity score ≥4, and R20:3 > 1.31 significantly predicted DGF, P < .05 with high area under the curve for R20:3 of 0.97. Grafts with parameters above the cutoffs also showed significantly worse GFR at 1- and 3-months post-transplant. On multivariate analysis, prolonged cold ischemia time was associated with a higher risk of DGF, odds ratio 1.005 (95% confidence interval 1.003-1.007), P < .05.

    CONCLUSION: Baseline MAG3 accurately depicts early graft function and was also predictive of GFR at 1- and 3- months post-transplant. These baseline MAG3 scans could be particularly useful amongst deceased donor graft recipients owing to the higher risk of poor graft function.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links