MyMedR

Displaying publications 41 - 60 of 73 in total

Abstract:

Sort:

Sustainable approach in phlorotannin recovery from macroalgae

Chia SR, Show PL, Phang SM, Ling TC, Ong HC

J Biosci Bioeng, 2018 Aug;126(2):220-225.
PMID: 29673988 DOI: 10.1016/j.jbiosc.2018.02.015

In this present study, alcohol/salt liquid biphasic system was used to extract phlorotannin from brown macroalgae. Liquid biphasic system is a new green technology that integrated with various processes into one-step, by concentrating, separating and purifying the bioproduct in a unit operation. The solvent used is non-toxic and there is potential for solvent recovery which is beneficial to the environment. Phlorotannin is a bioactive compound that has gained much attention due to its health beneficial effect. Therefore, the isolation of phlorotannin is lucrative as it contains various biological activities that are capable to be utilised into food and pharmaceutical application. By using 2-propanol/ammonium sulphate system, the highest recovery of phlorotannin was 76.1% and 91.67% with purification factor of 2.49 and 1.59 from Padina australis and Sargassum binderi, respectively. A recycling study was performed and the salt phase of system was recycled where maximum salt recovery of 41.04% and 72.39% could be obtained from systems containing P. australis and S. binderi, respectively. Similar recovery of phlorotannin was observed after performing two cycles of the system, this concludes that the system has good recyclability and eco-friendly.
In vitro antidermatophytic activity and cytotoxicity of extracts derived from medicinal plants and marine algae

Sit NW, Chan YS, Lai SC, Lim LN, Looi GT, Tay PL, et al.

J Mycol Med, 2018 Sep;28(3):561-567.
PMID: 30060991 DOI: 10.1016/j.mycmed.2018.07.001

OBJECTIVES: This study was conducted to evaluate the antidermatophytic activity of 48 extracts obtained from medicinal plants (Cibotium barometz, Melastoma malabathricum, Meuhlenbeckia platyclada, Rhapis excelsa, Syzygium myrtifolium, Vernonia amygdalina) and marine algae (Caulerpa sertularioides, Kappaphycus alvarezii) against Trichophyton rubrum and Trichophyton interdigitale (ATCC reference strains), and the cytotoxicity using African monkey kidney epithelial (Vero) cells. Active plant extracts were screened for the presence of phytochemicals and tested against clinical isolates of Trichophyton tonsurans.
METHODS: Six different extracts (hexane, chloroform, ethyl acetate, ethanol, methanol and water) were obtained from each plant or algae sample using sequential solvent extraction. The antidermatophytic activity for the extracts was assessed using a colourimetric broth microdilution method. The viability of Vero cells was measured by Neutral Red uptake assay.
RESULTS: All the extracts (except the water extracts of V. amygdalina, C. sertularioides and K. alvarezii) showed antidermatophytic activity against Trichophyton spp. The minimum fungicidal concentration (MFC) ranges for the plant extracts against T. rubrum and T. interdigitale are 0.0025-2.50 and 0.005-2.50mg/mL, respectively. The algae extracts exhibited lower potency against both species, showing MFC ranges of 0.08-2.50 and 0.31-2.50mg/mL, respectively. The ethanol and methanol extracts from the leaves of R. excelsa, and the methanol and water extracts from the leaves of S. myrtifolium were highly active (MFC<0.1mg/mL) and with high selectivity indices (SI>2.8) against reference strains of T. rubrum and T. interdigitale, and most of the clinical isolates of T. tonsurans. Phytochemical analysis indicates the presence of alkaloids, anthraquinones, flavonoids, saponins, tannins, phenolics and triterpenoids in the extracts.
CONCLUSIONS: The medicinal plant extracts exhibited stronger antidermatophytic activity compared to the algae extracts. The leaves of R. excelsa and S. myrtifolium are potential sources of new antidermatophytic agents against Trichophyton spp.
Anaemia in pregnancy in an aboriginal population

Ong HC

J Trop Med Hyg, 1974 Jan;77(1):22-6.
PMID: 4811560
An unusual case to pentastomiasis of the fallopian tube in an Aborigine woman

Ong HC

J Trop Med Hyg, 1974 Aug;77(8):187-9.
PMID: 4422640
Fulltext Antioxidant, Metal Chelating, Anti-glucosidase Activities and Phytochemical Analysis of Selected Tropical Medicinal Plants

Wong FC, Yong AL, Ting EP, Khoo SC, Ong HC, Chai TT

Iran J Pharm Res, 2014;13(4):1409-15.
PMID: 25587331

The purpose of this investigation was to determine the antioxidant potentials and anti-glucosidase activities of six tropical medicinal plants. The levels of phenolic constituents in these medicinal plants were also quantified and compared. Antioxidation potentials were determined colorimetrically for scavenging activities against DPPH and NO radicals. Metal chelating assay was based on the measurement of iron-ferrozine absorbance at 562 nm. Anti-diabetic potentials were measured by using α-glucosidase as target enzyme. Medicinal plants' total phenolic, total flavonoid and hydroxycinnamic acid contents were determined using spectrophotometric methods, by comparison to standard plots prepared using gallic acid, quercetin and caffeic acid standards, respectively. Radical scavenging and metal chelating activities were detected in all medicinal plants, in concentration-dependent manners. Among the six plants tested, C. nutans, C. formosana and H. diffusa were found to possess α-glucosidase inhibitory activities. Spectrophotometric analysis indicated that the total phenolic, total flavonoid and hydroxycinnamic acid contents ranged from 12.13-21.39 mg GAE per g of dry sample, 1.83-9.86 mg QE per g of dry sample, and 0.91-2.74 mg CAE per g of dry sample, respectively. Our results suggested that C. nutans and C. formosana could potentially be used for the isolation of potent antioxidants and anti-diabetic compounds. To the best of our knowledge, this study represents the first time that C. nutans (Acanthaceae family) was reported in literature with glucosidase inhibition activity.
Fulltext Case report : Actinomyces naeslundii complicating preterm labour in a trisomy-21 pregnancy

Ong HC, Ling AC, Ng DS, Ng RX, Wong PL, Omar SFS

IDCases, 2021;23:e01051.
PMID: 33532241 DOI: 10.1016/j.idcr.2021.e01051

Preterm birth is a global concern with considerable morbidity and mortality. Intrapartum infection is a known cause of preterm birth and Actinomyces infection is one of the infections contributing to preterm birth. We report a case of preterm birth of a trisomy-21 neonate to a mother with positive Actinomyces naeslundii from an intra-operative placental swab sample and discussed the relationship of this bacteria and preterm delivery, and the role of postpartum antibiotics use in this case.
Investigation of antibacterial mechanism and identification of bacterial protein targets mediated by antibacterial medicinal plant extracts

Yong AL, Ooh KF, Ong HC, Chai TT, Wong FC

Food Chem, 2015 Nov 1;186:32-6.
PMID: 25976788 DOI: 10.1016/j.foodchem.2014.11.103

In this paper, we investigated the antibacterial mechanism and potential therapeutic targets of three antibacterial medicinal plants. Upon treatment with the plant extracts, bacterial proteins were extracted and resolved using denaturing gel electrophoresis. Differentially-expressed bacterial proteins were excised from the gels and subjected to sequence analysis by MALDI TOF-TOF mass spectrometry. From our study, seven differentially expressed bacterial proteins (triacylglycerol lipase, N-acetylmuramoyl-L-alanine amidase, flagellin, outer membrane protein A, stringent starvation protein A, 30S ribosomal protein s1 and 60 kDa chaperonin) were identified. Additionally, scanning electron microscope study indicated morphological damages induced on bacterial cell surfaces. To the best of our knowledge, this represents the first time these bacterial proteins are being reported, following treatments with the antibacterial plant extracts. Further studies in this direction could lead to the detailed understanding of their inhibition mechanism and discovery of target-specific antibacterial agents.
Water fraction of edible medicinal fern Stenochlaena palustris is a potent α-glucosidase inhibitor with concurrent antioxidant activity

Chai TT, Kwek MT, Ong HC, Wong FC

Food Chem, 2015 Nov 1;186:26-31.
PMID: 25976787 DOI: 10.1016/j.foodchem.2014.12.099

This study aimed to isolate a potent antiglucosidase and antioxidant fraction from Stenochlaena palustris. Extraction was performed with hexane, chloroform, ethyl acetate, methanol, and water. Antiglucosidase, 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging and ferric reducing antioxidant power (FRAP) assays found methanol extract (ME) to be the most active. Water fraction (WF) of ME was a stronger α-glucosidase inhibitor (EC50 2.9 μg/mL) than quercetin, with weak antiamylase activity. WF was a competitive α-glucosidase inhibitor. DPPH scavenging activity of WF (EC50 7.7 μg/mL) was weaker than quercetin. WF (EC50 364 μg/mL) was a stronger hydrogen peroxide scavenger than gallic acid (EC50 838 μg/mL) and was equally strong as quercetin in scavenging superoxide. WF possessed moderate copper chelating activity. WF was enriched in total phenolics (TP) and hydroxycinnamic acids (THC). TP correlated with antioxidant activity (R(2) > 0.76). Only THC correlated with antiglucosidase activity (R(2) = 0.86). Overall, WF demonstrated concurrent, potent antiglucosidase and antioxidant activities.
A review on the engine performance and exhaust emission characteristics of diesel engines fueled with biodiesel blends

Damanik N, Ong HC, Tong CW, Mahlia TMI, Silitonga AS

Environ Sci Pollut Res Int, 2018 Jun;25(16):15307-15325.
PMID: 29721797 DOI: 10.1007/s11356-018-2098-8

Biodiesels have gained much popularity because they are cleaner alternative fuels and they can be used directly in diesel engines without modifications. In this paper, a brief review of the key studies pertaining to the engine performance and exhaust emission characteristics of diesel engines fueled with biodiesel blends, exhaust aftertreatment systems, and low-temperature combustion technology is presented. In general, most biodiesel blends result in a significant decrease in carbon monoxide and total unburned hydrocarbon emissions. There is also a decrease in carbon monoxide, nitrogen oxide, and total unburned hydrocarbon emissions while the engine performance increases for diesel engines fueled with biodiesels blended with nano-additives. The development of automotive technologies, such as exhaust gas recirculation systems and low-temperature combustion technology, also improves the thermal efficiency of diesel engines and reduces nitrogen oxide and particulate matter emissions.
Analysis of the performance, emission and combustion characteristics of a turbocharged diesel engine fuelled with Jatropha curcas biodiesel-diesel blends using kernel-based extreme learning machine

Silitonga AS, Hassan MH, Ong HC, Kusumo F

Environ Sci Pollut Res Int, 2017 Nov;24(32):25383-25405.
PMID: 28932948 DOI: 10.1007/s11356-017-0141-9

The purpose of this study is to investigate the performance, emission and combustion characteristics of a four-cylinder common-rail turbocharged diesel engine fuelled with Jatropha curcas biodiesel-diesel blends. A kernel-based extreme learning machine (KELM) model is developed in this study using MATLAB software in order to predict the performance, combustion and emission characteristics of the engine. To acquire the data for training and testing the KELM model, the engine speed was selected as the input parameter, whereas the performance, exhaust emissions and combustion characteristics were chosen as the output parameters of the KELM model. The performance, emissions and combustion characteristics predicted by the KELM model were validated by comparing the predicted data with the experimental data. The results show that the coefficient of determination of the parameters is within a range of 0.9805-0.9991 for both the KELM model and the experimental data. The mean absolute percentage error is within a range of 0.1259-2.3838. This study shows that KELM modelling is a useful technique in biodiesel production since it facilitates scientists and researchers to predict the performance, exhaust emissions and combustion characteristics of internal combustion engines with high accuracy.
Environment-friendly deoxygenation of non-edible Ceiba oil to liquid hydrocarbon biofuel: process parameters and optimization study

Abdullah NHB, Mijan NA, Taufiq-Yap YH, Ong HC, Lee HV

Environ Sci Pollut Res Int, 2022 Jan 25.
PMID: 35075565 DOI: 10.1007/s11356-022-18508-4

Non-edible Ceiba oil has the potential to be a sustainable biofuel resource in tropical countries that can replace a portion of today's fossil fuels. Catalytic deoxygenation of the Ceiba oil (high O/C ratio) was conducted to produce hydrocarbon biofuel (high H/C ratio) over NiO-CaO5/SiO2-Al2O3 catalyst with aims of high diesel selectivity and catalyst reusability. In the present study, response surface methodology (RSM) technique with Box-Behnken experimental designs (BBD) was used to evaluate and optimize liquid hydrocarbon yield by considering the following deoxygenation parameters: catalyst loading (1-9 wt. %), reaction temperature (300-380 °C) and reaction time (30-180 min). According to the RSM results, the maximum yield for liquid hydrocarbon n-(C8-C20) was found to be 77% at 340 °C within 105 min and 5 wt. % catalyst loading. In addition, the deoxygenation model showed that the catalyst loading-reaction time interaction has a major impact on the deoxygenation activity. Based on the product analysis, oxygenated species from Ceiba oil were successfully removed in the form of CO2/CO via decarboxylation/decarbonylation (deCOx) pathways. The NiO-CaO5/SiO2-Al2O3 catalyst rendered stable reusability for five consecutive runs with liquid hydrocarbon yield within the range of 66-75% with n-(C15 + C17) selectivity of 64-72%. Despite this, coke deposition was observed after several times of catalyst usage, which is due to the high deoxygenation temperature (> 300 °C) that resulted in unfavourable polymerization side reaction.
Source, distribution and emerging threat of micro- and nanoplastics to marine organism and human health: Socio-economic impact and management strategies

Mofijur M, Ahmed SF, Rahman SMA, Arafat Siddiki SY, Islam ABMS, Shahabuddin M, et al.

Environ Res, 2021 04;195:110857.
PMID: 33581088 DOI: 10.1016/j.envres.2021.110857

The nature of micro- and nanoplastics and their harmful consequences has drawn significant attention in recent years in the context of environmental protection. Therefore, this paper aims to provide an overview of the existing literature related to this evolving subject, focusing on the documented human health and marine environment impacts of micro- and nanoplastics and including a discussion of the economic challenges and strategies to mitigate this waste problem. The study highlights the micro- and nanoplastics distribution across various trophic levels of the food web, and in different organs in infected animals which is possible due to their reduced size and their lightweight, multi-coloured and abundant features. Consequently, micro- and nanoplastics pose significant risks to marine organisms and human health in the form of cytotoxicity, acute reactions, and undesirable immune responses. They affect several sectors including aquaculture, agriculture, fisheries, transportation, industrial sectors, power generation, tourism, and local authorities causing considerable economic losses. This can be minimised by identifying key sources of environmental plastic contamination and educating the public, thus reducing the transfer of micro- and nanoplastics into the environment. Furthermore, the exploitation of the potential of microorganisms, particularly those from marine origins that can degrade plastics, could offer an enhanced and environmentally sound approach to mitigate micro- and nanoplastics pollution.
Fulltext Prospect of biobased antiviral face mask to limit the coronavirus outbreak

Chowdhury MA, Shuvho MBA, Shahid MA, Haque AKMM, Kashem MA, Lam SS, et al.

Environ Res, 2021 Jan;192:110294.
PMID: 33022215 DOI: 10.1016/j.envres.2020.110294

The rapid spread of COVID-19 has led to nationwide lockdowns in many countries. The COVID-19 pandemic has played serious havoc on economic activities throughout the world. Researchers are immensely curious about how to give the best protection to people before a vaccine becomes available. The coronavirus spreads principally through saliva droplets. Thus, it would be a great opportunity if the virus spread could be controlled at an early stage. The face mask can limit virus spread from both inside and outside the mask. This is the first study that has endeavoured to explore the design and fabrication of an antiviral face mask using licorice root extract, which has antimicrobial properties due to glycyrrhetinic acid (GA) and glycyrrhizin (GL). An electrospinning process was utilized to fabricate nanofibrous membrane and virus deactivation mechanisms discussed. The nanofiber mask material was characterized by SEM and airflow rate testing. SEM results indicated that the nanofibers from electrospinning are about 15-30 μm in diameter with random porosity and orientation which have the potential to capture and kill the virus. Theoretical estimation signifies that an 85 L/min rate of airflow through the face mask is possible which ensures good breathability over an extensive range of pressure drops and pore sizes. Finally, it can be concluded that licorice root membrane may be used to produce a biobased face mask to control COVID-19 spread.
Valorization of sorghum distillery residue to produce bioethanol for pollution mitigation and circular economy

Chen WH, Lo HJ, Yu KL, Ong HC, Sheen HK

Environ Pollut, 2021 Sep 15;285:117196.
PMID: 33962308 DOI: 10.1016/j.envpol.2021.117196

This research aims to study the wet torrefaction (WT) and saccharification of sorghum distillery residue (SDR) towards hydrochar and bioethanol production. The experiments are designed by Box-Behnken design from response surface methodology where the operating conditions include sulfuric acid concentration (0, 0.01, and 0.02 M), amyloglucosidase concentration (36, 51, and 66 IU), and saccharification time (120, 180, and 240 min). Compared to conventional dry torrefaction, the hydrochar yield is between 13.24 and 14.73%, which is much lower than dry torrefaction biochar (yield >50%). The calorific value of the raw SDR is 17.15 MJ/kg, which is significantly enhanced to 22.36-23.37 MJ/kg after WT. When the sulfuric acid concentration increases from 0 to 0.02 M, the glucose concentration in the product increases from 5.59 g/L to 13.05 g/L. The prediction of analysis of variance suggests that the best combination to maximum glucose production is 0.02 M H2SO4, 66 IU enzyme concentration, and 120 min saccharification time, and the glucose concentration is 30.85 g/L. The maximum bioethanol concentration of 19.21 g/L is obtained, which is higher than those from wheat straw (18.1 g/L) and sweet sorghum residue (16.2 g/L). A large amount of SDR is generated in the kaoliang liquor production process, which may cause environmental problems if it is not appropriately treated. This study fulfills SDR valorization for hydrochar and bioenergy to lower environmental pollution and even achieve a circular economy.
Fulltext Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges

Su G, Ong HC, Ibrahim S, Fattah IMR, Mofijur M, Chong CT

Environ Pollut, 2021 Jun 15;279:116934.
PMID: 33744627 DOI: 10.1016/j.envpol.2021.116934

The COVID-19 pandemic has exerted great shocks and challenges to the environment, society and economy. Simultaneously, an intractable issue appeared: a considerable number of hazardous medical wastes have been generated from the hospitals, clinics, and other health care facilities, constituting a serious threat to public health and environmental sustainability without proper management. Traditional disposal methods like incineration, landfill and autoclaving are unable to reduce environmental burden due to the issues such as toxic gas release, large land occupation, and unsustainability. While the application of clean and safe pyrolysis technology on the medical wastes treatment to produce high-grade bioproducts has the potential to alleviate the situation. Besides, medical wastes are excellent and ideal raw materials, which possess high hydrogen, carbon content and heating value. Consequently, pyrolysis of medical wastes can deal with wastes and generate valuable products like bio-oil and biochar. Consequently, this paper presents a critical and comprehensive review of the pyrolysis of medical wastes. It demonstrates the feasibility of pyrolysis, which mainly includes pyrolysis characteristics, product properties, related problems, the prospects and future challenges of pyrolysis of medical wastes.
Fulltext Co-pyrolysis of medical protective clothing and oil palm wastes for biofuel: Experimental, techno-economic, and environmental analyses

Su G, Zulkifli NWM, Ong HC, Ibrahim S, Cheah MY, Zhu R, et al.

Energy (Oxf), 2023 Jun 15;273:127221.
PMID: 36942281 DOI: 10.1016/j.energy.2023.127221

The ongoing global pandemic of COVID-19 has devastatingly influenced the environment, society, and economy around the world. Numerous medical resources are used to inhibit the infectious transmission of the virus, resulting in massive medical waste. This study proposes a sustainable and environment-friendly method to convert hazardous medical waste into valuable fuel products through pyrolysis. Medical protective clothing (MPC), a typical medical waste from COVID-19, was utilized for co-pyrolysis with oil palm wastes (OPWs). The utilization of MPC improved the bio-oil properties in OPWs pyrolysis. The addition of catalysts further ameliorated the bio-oil quality. HZSM-5 was more effective in producing hydrocarbons in bio-oil, and the relevant reaction pathway was proposed. Meanwhile, a project was simulated to co-produce bio-oil and electricity from the co-pyrolysis of OPWs and MPC from application perspectives. The techno-economic analysis indicated that the project was economically feasible, and the payback period was 6.30-8.75 years. Moreover, it was also environmentally benign as its global warming potential varied from -211.13 to -90.76 kg CO2-eq/t. Therefore, converting MPC and OPWs into biofuel and electricity through co-pyrolysis is a green, economic, and sustainable method that can decrease waste, produce valuable fuel products, and achieve remarkable economic and environmental benefits.
Synthesis, Molecular Docking, and Biological Evaluation of Benzimidazole Derivatives as Selective Butyrylcholinesterase Inhibitors

Ha ZY, Ong HC, Oo CW, Yeong KY

Curr Alzheimer Res, 2020;17(13):1177-1185.
PMID: 33602088 DOI: 10.2174/1567205018666210218151228

BACKGROUND: Benzimidazole is an interesting pharmacophore which has been extensively studied in medicinal chemistry due to its high affinity towards various enzymes and receptors. Its derivatives have been previously shown to possess a wide range of biological activities including anthelmintic, antihypertensive, antiulcer, as well as anticholinesterase activity.
OBJECTIVE: The objective of this study is to search for more potent benzimidazole-based cholinesterase inhibitors, through the modification of the 1- and 2-positions of the benzimidazole core.
METHODS: Synthesis of compounds were carried out via a 4-step reaction scheme following a previously reported protocol. Structure-activity relationship of the compounds are established through in vitro cholinesterase assays and in silico docking studies. Furthermore, cytotoxicity and blood brain barrier (BBB) permeability of the compounds were also investigated.
RESULTS: Among the synthesised compounds, three of them (5IIa, 5IIb, and 5IIc) exhibited potent selective butyrylcholinesterase inhibition at low micromolar level. The compounds did not show any significant cytotoxicity when tested against a panel of human cell lines. Moreover, the most active compound, 5IIc, was highly permeable across the blood brain barrier.
CONCLUSION: In total 10 benzimidazole derivatives were synthesized and screened for their AChE and BuChE inhibitory activities. Lead compound 5Iic, represents a valuable compound for further development as potential AD therapeutics.
Catalytic level identification of ZSM-5 on biomass pyrolysis and aromatic hydrocarbon formation

Chen WH, Cheng CL, Lee KT, Lam SS, Ong HC, Ok YS, et al.

Chemosphere, 2021 May;271:129510.
PMID: 33434827 DOI: 10.1016/j.chemosphere.2020.129510

Zeolite socony mobil-5 (ZSM-5) is a common catalyst used for biomass pyrolysis. Nevertheless, the quantitative information on the catalytic behavior of ZSM-5 on biomass pyrolysis is absent so far. This study focuses on the catalytic pyrolysis phenomena and mechanisms of biomass wastes using ZSM-5 via thermogravimetric analyzer and pyrolysis-gas chromatography/mass spectrometry, with particular emphasis on catalytic level identification and aromatic hydrocarbons (AHs) formation. Two biomass wastes of sawdust and sorghum distillery residue (SDR) are investigated, while four biomass-to-catalyst ratios are considered. The analysis suggests that biomass waste pyrolysis processes can be divided into three zones, proceeding from a heat-transfer dominant zone (zone 1) to catalysis dominant zones (zones 2 and 3). The indicators of the intensity of difference (IOD), catalytic effective area, catalytic index (CI), and aromatic enhancement index are conducted to measure the catalytic effect of ZSM-5 on biomass waste pyrolysis and AHs formation. The maximum IOD occurs in zone 2, showing the highest intensity of the catalytic effect. The CI values of the two biomass wastes increase with increasing the biomass-to-catalyst ratio. However, there exists a threshold for sawdust pyrolysis, indicating a limit for the catalytic effect on sawdust. The higher the catalyst addition, the higher the AHs proportion in the vapor stream. When the biomass-to-catalyst ratio is 1/10, AHs formation is intensified significantly, especially for sawdust. Overall, the indexes conducted in the present study can provide useful measures to identify the catalytic pyrolysis dynamics and levels.
Fourth generation biofuel from genetically modified algal biomass: Challenges and future directions

Shokravi H, Shokravi Z, Heidarrezaei M, Ong HC, Rahimian Koloor SS, Petrů M, et al.

Chemosphere, 2021 Dec;285:131535.
PMID: 34329137 DOI: 10.1016/j.chemosphere.2021.131535

Genetic engineering applications in the field of biofuel are rapidly expanding due to their potential to boost biomass productivity while lowering its cost and enhancing its quality. Recently, fourth-generation biofuel (FGB), which is biofuel obtained from genetically modified (GM) algae biomass, has gained considerable attention from academic and industrial communities. However, replacing fossil resources with FGB is still beset with many challenges. Most notably, technical aspects of genetic modification operations need to be more fully articulated and elaborated. However, relatively little attention has been paid to GM algal biomass. There is a limited number of reviews on the progress and challenges faced in the algal genetics of FGB. Therefore, the present review aims to fill this gap in the literature by recapitulating the findings of recent studies and achievements on safe and efficient genetic manipulation in the production of FGB. Then, the essential issues and parameters related to genome editing in algal strains are highlighted. Finally, the main challenges to FGB pertaining to the diffusion risk and regulatory frameworks are addressed. This review concluded that the technical and biosafety aspects of FGB, as well as the complexity and diversity of the related regulations, legitimacy concerns, and health and environmental risks, are among the most important challenges that require a strong commitment at the national/international levels to reach a global consensus.
Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis

Soudagar MEM, Kiong TS, Jathar L, Nik Ghazali NN, Ramesh S, Awasarmol U, et al.

Chemosphere, 2024 Apr;353:141540.
PMID: 38423144 DOI: 10.1016/j.chemosphere.2024.141540

The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links