Displaying publications 41 - 60 of 143 in total

Abstract:
Sort:
  1. Optimization of microencapsulation process for self-healing polymeric material
    Then S, Gan SN, Noor Hayaty Abu Kasim
    Sains Malaysiana, 2011;40:1179-1186.
    A series of poly(urea-formaldehyde) (PUF) microcapsules filled with dicyclopentadiene (DCPD) was successfully prepared by in situ polymerization. The effect of diverse process parameters and ingredients on the morphology of the microcapsules was observed by SEM, optical microscopy (OM) and digital microscopy. Different techniques for the characterization of the chemical structure and the core content were considered such as FT-IR and 1H-NMR as well as the characterization of thermal properties by DSC. High yields of free flowing powder of spherical microcapsules were produced. The synthesized microcapsules can be incorporated into another polymeric host material. In the event the host material cracks due to excessive stress or strong impact, the microcapsules would rupture to release the DCPD, which could polymerize to repair the crack.
    Matched MeSH terms: Formaldehyde
  2. Array comparative genomic hybridization analysis identified the chromosomal aberrations and putative genes involved in Prostate Tumorigenesis of Malaysian men
    Nenny Noorina Saaid, Reena Rahayu Md Zin, Siti Aishah Md Ali, Sharifah Noor Akmal Syed Hussain, Zulkifli Zainuddin, Zubaidah Zakaria
    Sains Malaysiana, 2014;43:1317-1326.
    The identification of chromosomal aberrations in prostate cancer has been widely studied with several known oncogenes and tumor suppressor genes have successfully been discovered. The most frequent aberrations detected in western population were losses in chromosome 5q, 6q, 8p, 13q, 16q, 17p, 18q and gains of 7p/q and 8q. The purpose of this study was to determine the chromosomal aberrations among Malaysian men of Southeast Asia population and discover those potential genes within that chromosomal aberrant region. Thirty-six formalin-fixed paraffin embedded specimens consist of eight organ-confined prostate cancer cases, five with capsular invasion, 14 showed metastasis and nine cases had no tumor stage recorded, were analyzed by array CGH technique. Chromosomal losses were frequently detected at 4q, 6q, 8p, 13q, 18q while gains at 7q, 11q, 12p, 16q and 17q. Gain of 16q24.3 was statistically significant with tumor size. Gains of 6q25.1 and Xq12 as well as losses of 3p13-p1.2 and 13q33.1-q33.3 were significantly correlated with Gleason grade whereas 12p13.31 gain was associated with bone metastasis. Several potential genes have also been found within that aberrant region which is myopodin (4q26-q27), ROBO1 (3p13-p11.2), ERCC5 (13q33.1-q33.3) and CD9 (12p13.31), suggesting that these genes may play a role in prostate cancer progression. The chromosomal aberrations identified by array CGH analysis could provide important clues to discover potential genes associated with prostate tumorigenesis of Malaysian men.
    Matched MeSH terms: Formaldehyde
  3. Effect of filler and thermal aging on the mechanical properties of phenolated oil palm empty fruit bunch base composite
    Ali Ahmadzadeh, Sarani Zakaria, Rozaidi Rasid, Sharifah Nabihah
    Sains Malaysiana, 2008;37:233-237.
    Biofiber is used in the polymer based composite as a renewable resource due to its positive environmental benefits, biodegradable properties, low cost and high toughness. Biocomposite was fabricated using oil palm empty fruit bunch (EFB) as filler in phenolated EFB (PEFB) matrix. Phenolated EFB (PEFB) obtained from liquefaction of EFB in phenol was used as a biopolymer to replace novolak phenolic resin which is commonly used in composite materials. Sulfuric acid was used as a catalyst in the liquefaction reaction. The effect of thermal aging and blending ratio of PEFB matrix and EFB fibers on the mechanical properties of composites has been studied. The flexural data before and after thermal aging revealed the optimum amount of EFB filler is 50% . The result showed better compatibility between EFB and PEFB when compared with EFB and commercial novolak resin.
    Matched MeSH terms: Formaldehyde
  4. As-spun bio-novolac fibre morphological study based on resin’s physico-chemical properties
    Siti Noorul Aina Ab Rahim, Sarani Zakaria, Sharifah Nabihah Syed Jaafar, Chin HC, Rasidi Roslan, Hatika Kaco, et al.
    Sains Malaysiana, 2017;46:1659-1665.
    Bio-novolac fibre made from phenol-formaldehyde derived oil palm empty fruit bunch (EFB) was produced using electrospinning method. The bio-novolac phenol-formaldehyde was prepared via liquefaction and resinification at two different molar ratios of formaldehyde to liquefied EFB (LEFB) (F:LEFB = 0.5:1 and 0.8:1). Electrospinning was applied to the bio-novolac phenol-formaldehyde (BPF) in order to form smooth and thin as-spun fibre. The BPF was electrospun at 15 kV and 15 cm distance between needle and collector at a flow rate of 0.5 mL/h. At lower molecular weight of BPF resin, beads formation was observed. The addition of poly(vinyl) butyral (Mw = 175,000 - 250,000) has improved the fibre formation with lesser beads hence produced more fibre. Polymer solution with higher molecular weight produced better quality fibre.
    Matched MeSH terms: Formaldehyde
  5. Fulltext PREVALENCE AND RISK FACTORS OF SCHISTOSOMIASIS AMONG HAUSA COMMUNITIES IN KANO STATE, NIGERIA
    Dawaki S, Al-Mekhlafi HM, Ithoi I, Ibrahim J, Abdulsalam AM, Ahmed A, et al.
    Rev Inst Med Trop Sao Paulo, 2016 Jul 11;58.
    PMID: 27410914 DOI: 10.1590/S1678-9946201658054
    Schistosomiasis remains one of the most prevalent neglected tropical diseases especially in Nigeria which has the greatest number of infected people worldwide. A cross-sectional study was conducted among 551 participants from Kano State, North Central Nigeria. Fecal samples were examined for the presence of Schistosoma mansoni eggs using the formalin-ether sedimentation method while the urine samples were examined using the filtration technique for the presence of S. haematobium eggs. Demographic, socioeconomic and environmental information was collected using a pre-validated questionnaire. The overall prevalence of schistosomiasis was 17.8%, with 8.9% and 8.3% infected with S. mansoni and S. haematobium, respectively and 0.5% presenting co-infection with both species. The multiple logistic regression analysis revealed that age < 18 years (OR = 2.13; 95% CI; 1.34- 3.41), presence of infected family members (OR = 3.98; 95% CI; 2.13-7.46), and history of infection (OR = 2.87; 95% CI; 1.87- 4.56) were the significant risk factors associated with schistosomiasis in these communities. In conclusion, this study revealed that schistosomiasis is still prevalent among Hausa communities in Nigeria. Mass drug administration, health education and community mobilization are imperative strategies to significantly reduce the prevalence and morbidity of schistosomiasis in these communities.
    Matched MeSH terms: Formaldehyde
  6. Fulltext Intraspecific macroscopic digestive anatomy of ring-tailed lemurs (Lemur catta), including a comparison of frozen and formalin-stored specimens
    Clauss M, Trümpler J, Ackermans NL, Kitchener AC, Hantke G, Stagegaard J, et al.
    Primates, 2021 Mar;62(2):431-441.
    PMID: 33180215 DOI: 10.1007/s10329-020-00873-8
    Digestive tract measurements are often considered species specific, but little information exists on the degree to which they change during ontogeny within a species. Additionally, access to anatomical material from nondomestic species is often limited, with fixed tissues possibly representing the only available source, though the degree to which this material is representative in terms of dimensions and weight is debatable. In the present study, the macroscopic anatomy of the digestive tract (length of intestinal sections, and tissue weights of stomach and intestines) of 58 Lemur catta [ranging in age from 1 month (neonates) to 25 years], which had been stored frozen (n = 27) or fixed in formalin (n = 31), was quantified. Particular attention was paid to the caecum and the possible presence of an appendix. The intraspecific allometric scaling of body mass (BM)0.46[0.40;0.51] for total intestine length and BM0.48[0.41;0.54] for small intestine length was higher than the expected geometric scaling of BM0.33, and similar to that reported in the literature for interspecific scaling. This difference in scaling is usually explained by the hypothesis that, to maintain optimal absorption, the diameter of the intestinal tube cannot increase geometrically. Therefore, geometric volume gain of increasing body mass is accommodated for by more-than-geometric length scaling. According to the literature, not all L. catta have an appendix. No appendix was found in the specimens in the present study. The proportions of length measurements did not change markedly during ontogeny, indicating that the proportions of the foetus are representative of those of the adult animal. By contrast, width and tissue-mass scaling of the caecum indicated disproportionate growth of this organ during ontogeny that was not reflected in its length. Compared to overall intraspecific variation, the method of storage (frozen vs. formalin) had no relevant impact on length or weight measurements.
    Matched MeSH terms: Formaldehyde
  7. Fulltext Properties and Interfacial Bonding Enhancement of Oil Palm Bio-Ash Nanoparticles Biocomposites
    Abdullah CK, Ismail I, Nurul Fazita MR, Olaiya NG, Nasution H, Oyekanmi AA, et al.
    Polymers (Basel), 2021 May 17;13(10).
    PMID: 34067604 DOI: 10.3390/polym13101615
    The effect of incorporating different loadings of oil palm bio-ash nanoparticles from agriculture waste on the properties of phenol-formaldehyde resin was investigated in this study. The bio-ash filler was used to enhance the performance of phenol-formaldehyde nanocomposites. Phenol-formaldehyde resin filled with oil palm bio-ash nanoparticles was prepared via the in-situ polymerization process to produce nanocomposites. The transmission electron microscope and particle size analyzer result revealed that oil palm bio-ash nanoparticles had a spherical geometry of 90 nm. Furthermore, X-ray diffraction results confirmed the formation of crystalline structure in oil palm bio-ash nanoparticles and phenol-formaldehyde nanocomposites. The thermogravimetric analysis indicated that the presence of oil palm bio-ash nanoparticles enhanced the thermal stability of the nanocomposites. The presence of oil palm bio-ash nanoparticles with 1% loading in phenol-formaldehyde resin enhanced the internal bonding strength of plywood composites. The scanning electron microscope image revealed that phenol-formaldehyde nanocomposites morphology had better uniform distribution and dispersion with 1% oil palm bio-ash nanoparticle loading than other phenol-formaldehyde nanocomposites produced. The nanocomposite has potential use in the development of particle and panel board for industrial applications.
    Matched MeSH terms: Formaldehyde
  8. Fulltext Enhancement of Oil Palm Waste Nanoparticles on the Properties and Characterization of Hybrid Plywood Biocomposites
    Nuryawan A, Abdullah CK, Hazwan CM, Olaiya NG, Yahya EB, Risnasari I, et al.
    Polymers (Basel), 2020 Apr 27;12(5).
    PMID: 32349385 DOI: 10.3390/polym12051007
    Using oil palm trunk (OPT) layered with empty fruit bunch (EFB), so-called hybrid plywood enhanced with palm oil ash nanoparticles, with phenol-formaldehyde (PF) resin as a binder, was produced in this study. The phenol-formaldehyde (PF) resins filled with different loading of oil palm ash (OPA) nanoparticles were prepared and used as glue for layers of the oil palm trunk (OPT) veneer and empty fruit bunch fibre mat. The resulting hybrid plywood produced was characterised. The physical, mechanical, thermal, and morphological properties of the hybrid plywood panels were investigated. The results obtained showed that the presence of OPA nanoparticles significantly affected the physical, mechanical, and thermal properties of the plywood panels. Significant improvements in dimension from water absorption and thickness swelling experiments were obtained for the plywood panels with the highest OPA nanoparticles loading in PF resin. The mechanical properties indicated that plywood composites showed improvement in flexural, shear, and impact properties until a certain loading of OPA nanoparticles in PF resin. Fracture surface morphology also showed the effectiveness of OPA nanoparticles in the reduction of layer breakage due to force and stress distribution. The thermal stability performance showed that PF filled OPA nanoparticles contributed to the thermal stability of the plywood panels. Therefore, the results obtained in this study showed that OPA nanoparticles certainly improved the characteristic of the hybrid plywood.
    Matched MeSH terms: Formaldehyde
  9. Fulltext Assessment of Telomere Length in Archived Formalin-Fixed, Paraffinized Human Tissue Is Confounded by Chronological Age and Storage Duration
    Kong PL, Looi LM, Lau TP, Cheah PL
    PLoS One, 2016;11(9):e0161720.
    PMID: 27598341 DOI: 10.1371/journal.pone.0161720
    Telomeres shorten with physiological aging but undergo substantial restoration during cancer immortalization. Increasingly, cancer studies utilize the archive of formalin-fixed, paraffin-embedded (FFPE) tissues in diagnostic pathology departments. Conceptually, such studies would be confounded by physiological telomere attrition and loss of DNA integrity from prolonged tissue storage. Our study aimed to investigate these two confounding factors. 145 FFPE tissues of surgically-resected, non-diseased appendixes were retrieved from our pathology archive, from years 2008 to 2014. Cases from 2013 to 2014 were categorized by patient chronological age (0-20 years, 21-40 years, 41-60 years, > 60 years). Telomere lengths of age categories were depicted by telomere/chromosome 2 centromere intensity ratio (TCR) revealed by quantitative fluorescence in situ hybridization. Material from individuals aged 0-20 years from years 2013/2014, 2011/2012, 2009/2010, and 2008 were compared for storage effect. Telomere integrity was assessed by telomere fluorescence intensity (TFI). Epithelial TCRs (mean ± SD) for the respective age groups were 4.84 ± 2.08, 3.64 ± 1.21, 2.03 ± 0.37, and 1.93 ± 0.45, whereas corresponding stromal TCRs were 5.16 ± 2.55, 3.84 ± 1.36, 2.49 ± 1.20, and 2.93 ± 1.24. A trend of inverse correlation with age in both epithelial and stromal tissues is supported by r = -0.69, p < 0.001 and r = -0.42, p < 0.001 respectively. Epithelial TFIs (mean ± SD) of years 2013/2014, 2011/2012, 2009/2010 and 2008 were 852.60 ± 432.46, 353.04 ± 127.12, 209.24 ± 55.57 and 429.22 ± 188.75 respectively. Generally, TFIs reduced with storage duration (r = -0.42, p < 0.001). Our findings agree that age-related telomere attrition occurs in normal somatic tissues, and suggest that an age-based reference can be established for telomere studies on FFPE tissues. We also showed that FFPE tissues archived beyond 2 years are suboptimal for telomere analysis.
    Matched MeSH terms: Formaldehyde
  10. Antinociceptive activity of the essential oil of Zingiber zerumbet
    Sulaiman MR, Tengku Mohamad TA, Shaik Mossadeq WM, Moin S, Yusof M, Mokhtar AF, et al.
    Planta Med, 2010 Feb;76(2):107-12.
    PMID: 19637111 DOI: 10.1055/s-0029-1185950
    In the present study, the rhizome essential oil from Zingiber zerumbet (Zingiberaceae) was evaluated for antinociceptive activity using chemical and thermal models of nociception, namely, the acetic acid-induced abdominal writhing test, the hot-plate test and the formalin-induced paw licking test. It was demonstrated that intraperitoneal administration of the essential oil of Z. zerumbet (EOZZ) at the doses of 30, 100 and 300 mg/kg produced significant dose-dependent inhibition of acetic acid-induced abdominal writhing, comparable to that of obtained with acetylsalicylic acid (100 mg/kg). At the same doses, the EOZZ produced significant dose-dependent increases in the latency time in the hot-plate test with respect to controls, and in the formalin-induced paw licking test, the EOZZ also significantly reduced the painful stimulus in both neurogenic and inflammatory phase of the test. In addition, the antinociceptive effect of the EOZZ in the formalin-induced paw licking test as well as hot-plate test was reversed by the nonselective opioid receptor antagonist, naloxone suggesting that the opioid system was involved in its analgesic mechanism of action. On the basis of these data, we concluded that the EOZZ possessed both central and peripheral antinociceptive activities which justifying its popular folkloric use to relieve some pain conditions.
    Matched MeSH terms: Formaldehyde
  11. Fulltext The impact of local surface changes in Borneo on atmospheric composition at wider spatial scales: coastal processes, land-use change and air quality
    Pyle JA, Warwick NJ, Harris NR, Abas MR, Archibald AT, Ashfold MJ, et al.
    Philos Trans R Soc Lond B Biol Sci, 2011 Nov 27;366(1582):3210-24.
    PMID: 22006963 DOI: 10.1098/rstb.2011.0060
    We present results from the OP3 campaign in Sabah during 2008 that allow us to study the impact of local emission changes over Borneo on atmospheric composition at the regional and wider scale. OP3 constituent data provide an important constraint on model performance. Treatment of boundary layer processes is highlighted as an important area of model uncertainty. Model studies of land-use change confirm earlier work, indicating that further changes to intensive oil palm agriculture in South East Asia, and the tropics in general, could have important impacts on air quality, with the biggest factor being the concomitant changes in NO(x) emissions. With the model scenarios used here, local increases in ozone of around 50 per cent could occur. We also report measurements of short-lived brominated compounds around Sabah suggesting that oceanic (and, especially, coastal) emission sources dominate locally. The concentration of bromine in short-lived halocarbons measured at the surface during OP3 amounted to about 7 ppt, setting an upper limit on the amount of these species that can reach the lower stratosphere.
    Matched MeSH terms: Formaldehyde/chemistry
  12. Fulltext Analgesic activity, toxicity study and phytochemical screening of standardized Cinnomomum iners leaves methanolic extract
    Mustaffa F, Indurkar J, Ismail S, Mordi MN, Ramanathan S, Mansor SM
    Pharmacognosy Res, 2010 Mar;2(2):76-81.
    PMID: 21808545 DOI: 10.4103/0974-8490.62952
    Cinnomomum iners standardized leaves methanolic extract (CSLE) was subjected to analgesic, toxicity and phytochemical studies. The analgesic activity of CSLE was evaluated using formalin, hot plate and tail flick tests at doses of 100, 200 and 500 mg/kg. CSLE showed significant activity (P < 0.05) in the formalin model (late phase) on the rats at doses of 200 and 500 mg/kg. However, CSLE did not show activity in the hot plate and tail flick tests. The results obtained suggest that CSLE acts peripherally to relieve pain. For the toxicity study, CSLE was orally administered to the Swiss albino mice according to the Organization for Economic Co-Operation and Development (OECD) guideline 423. There was no lethality or toxic symptoms observed for all the tested doses throughout the 14-day period. Phytochemical screening of CSLE showed the presence of cardiac glycoside, flavonoid, polyphenol, saponin, sugar, tannin and terpenoid.
    Matched MeSH terms: Formaldehyde
  13. Ameliorative Effect of Curcumin on Olanzapine-induced Obesity in Sprague-Dawley Rats
    Parasuraman S, Zhen KM, Banik U, Christapher PV
    Pharmacognosy Res, 2017 Jul-Sep;9(3):247-252.
    PMID: 28827965 DOI: 10.4103/pr.pr_8_17
    OBJECTIVE: To evaluate the effect of curcumin on olanzapine-induced obesity in rats.

    MATERIALS AND METHODS: Sprague-Dawley (SD) rats were used for experiments. The animals were divided into six groups, namely, normal control, olanzapine control, betahistine (10 mg/kg), and curcumin 50, 100, and 200 mg/kg treated groups. Except the normal control group, all other animals were administered with olanzapine 4 mg/kg intraperitoneally to induce obesity. The drugs were administered once daily, per oral for 28 days. During the experiment, body weight changes and behavior alterations were monitored at regular intervals. At the end of the experiment, blood sample was collected from all the experimental animals for biochemical analysis. Part of the liver and kidney tissues was harvested from the sacrificed animals and preserved in neutral formalin for histopathological studies.

    RESULTS: Curcumin showed a significant reduction in olanzapine-induced body weight gain on the rats and improved the locomotor effects. The effect of curcumin on olanzapine-induced body weight gain is not comparable with that of betahistine.

    CONCLUSION: This study has shown metabolic alteration effect of curcumin on olanzapine, an antipsychotic drug, treated SD rats.

    SUMMARY: Olanzapine is an atypical antipsychotic drug used for the treatment of schizophrenia and bipolar disorder. Obesity is an adverse effect of olanzapine, and the present study was made an attempt to study the effect of curcumin on olanzapine-induced obesity in rats. In this present study, curcumin significantly reduced olanzapine-induced body weight gain in rats. Abbreviations Used: 5HT: 5-hydroxytryptamine, ALP: Alkaline phosphatase, ALT: Alanine transaminase, ANOVA: Analysis of variance, AST: Aspartate transaminase, CMC: Carboxymethyl cellulose, D: Dopamine, H and E: Hematoxylin and Eosin stain, H: Histamine, HDL-C: Highdensity lipoprotein cholesterol, IP: Intraperitoneal, MAO: Monoamine oxidase, NaOH: Sodium hydroxide, SD rats: Sprague Dawley rats, TCs: Total cholesterols, TG: Triglyceride.
    Matched MeSH terms: Formaldehyde
  14. Fulltext The use of environmentally friendly bio-oil in the production of Phenol Formaldehyde (PF) resin
    Omar, Naja Nadiera, Iskandar Shahrim Mustafa, Nurhayati Abdullah, Rokiah Hashim
    Pertanika Journal of Science & Technology, 2018;26(1):177-192.
    MyJurnal
    Phenol Formaldehyde (PF) resin has been extensively used in the manufacturing industry as a binding agent, especially in the production of wood-based panels because of its ability to provide good moisture resistance, exterior strength and durability as well as excellent temperature stability. However, due to the use of limited petroleum-based phenol in its formulation, there is a strong interest in exploring renewable biomass material to partially substitute the petroleum-based phenol. In this study, the slow pyrolysis of biomass decomposition process was used to convert two types of biomass, namely, oil palm frond and Rhizophora hardwood, into bio-oil. The phenol-rich fraction of the bio-oil was separated and added into the formulation of PF resin to produce an environmentally-friendly type of PF resin, known as bio-oilphenol-formaldehyde (BPF) resin. This BPF resin was observed to have comparable viscosity, better alkalinity, improved non-volatile content and faster curing temperature than conventional PF resin. Moreover, the particleboard bonded with this BPF resin was observed to have just as excellent bonding strength as the one bonded using conventional PF resin. However, the BPF resin exhibited an increased level of free formaldehyde and less thermal stability than the conventional PF resin, probably due to the addition of the less reactive bio-oil.
    Matched MeSH terms: Formaldehyde
  15. Fulltext Physico-mechanical properties and formaldehyde emission of rubberwood particleboard made with UF resin admixed with ammonium and aluminium-based hardeners
    Abd Ghani Aizat, Paiman, Bawon, Lee, Seng Hua, Ashaari Zaidon
    Pertanika Journal of Science & Technology, 2019;27(1):473-488.
    MyJurnal
    In this study, the effects of addition of ammonium and aluminium-based hardeners into
    urea formaldehyde resin (UF) on the physico-mechanical properties and formaldehyde
    emission of the rubberwood particleboard were investigated. Four types of hardeners,
    namely ammonium chloride (AC), ammonium sulphate (AS), aluminium chloride (AlC)
    and aluminium sulphate (AlS), were added into UF resin. The acidity, gelation time,
    viscosity and free formaldehyde content of the UF/hardener mixtures were determined.
    Particleboard made with the UF/hardener mixtures were tested for physico-mechanical
    properties and formaldehyde emission. The pH values of the resin after addition of
    aluminium-based hardeners were higher and resulted in higher viscosity and shorter
    gelation time. Consequently, despite lower formaldehyde emission was recorded, the
    physico-mechanical properties of the resulted particleboard were inferior compared to
    that of ammonium-based hardeners. The best quality particleboard in terms of mechanical,
    physical and formaldehyde emission were obtained from the particleboard made with AS,
    followed by AC.
    Matched MeSH terms: Formaldehyde
  16. Fulltext DNA mismatch repair and CD133-marked cancer stem cells in colorectal carcinoma
    Cheah PL, Li J, Looi LM, Teoh KH, Ong DB, Arends MJ
    PeerJ, 2018;6:e5530.
    PMID: 30221090 DOI: 10.7717/peerj.5530
    Background: Except for a few studies with contradictory observations, information is lacking on the possibility of association between DNA mismatch repair (MMR) status and the presence of cancer stem cells in colorectal carcinoma (CRC), two important aspects in colorectal carcinogenesis.

    Methods: Eighty (40 right-sided and 40 left-sided) formalin-fixed, paraffin-embedded primary CRC were immunohistochemically studied for CD133, a putative CRC stem cell marker, and MMR proteins MLH1, MSH2, MSH6 and PMS2. CD133 expression was semi-quantitated for proportion of tumor immunopositivity on a scale of 0-5 and staining intensity on a scale of 0-3 with a final score (units) being the product of proportion and intensity of tumor staining. The tumor was considered immunopositive only when the tumor demonstrated moderate to strong intensity of CD133 staining (a decision made after analysis of CD133 expression in normal colon). Deficient MMR (dMMR) was interpreted as unequivocal loss of tumor nuclear staining for any MMR protein despite immunoreactivity in the internal positive controls.

    Results: CD133 was expressed in 36 (90.0%) left-sided and 28 (70.0%) right-sided tumors (p  0.05).

    Conclusion: Proficient MMR correlated with high levels of CD133-marked putative cancer stem cells in both right- and left-sided tumors, whereas significantly lower levels of CD133-marked putative cancer stem cells were associated with deficient MMR status in colorectal carcinomas found on the right.

    Matched MeSH terms: Formaldehyde
  17. Response of Coptotermes curvignathus (Isoptera: Rhinotermitidae) to formaldehyde catcher-treated particleboard
    Lee SH, H'ng PS, Peng TL, Lum WC
    Pak J Biol Sci, 2013 Nov 01;16(21):1415-8.
    PMID: 24511759
    The objective of this study is to investigate the feasibility of formaldehyde catcher as termites repellent. Single-layered UF-bonded particleboard was post-treated with formaldehyde catcher and heat respectively. Besides that, some boards were also produced with the formaldehyde catcher was added into the resin during the blending process, called add-in method. Particleboard post-treated with formaldehyde catcher reported the most severe attack. Heat-treated particleboard showed slightly better durability than the control blocks while the add-in catcher showed the best durability among three methods. A valid test was obtained as the termites survived the first week of the test. However, all the termites were found dead at the end of the test.
    Matched MeSH terms: Formaldehyde*
  18. Transcriptional profiling of oral squamous cell carcinoma using formalin-fixed paraffin-embedded samples
    Saleh A, Zain RB, Hussaini H, Ng F, Tanavde V, Hamid S, et al.
    Oral Oncol, 2010 May;46(5):379-86.
    PMID: 20371203 DOI: 10.1016/j.oraloncology.2010.02.022
    Despite the advances in cancer treatment, the 5-year survival rate for oral cancer has not changed significantly for the past 40 years and still remains among the worst of all anatomic sites. Gene expression microarrays have been used successfully in the identification of genetic alterations in cancer development, however, these have hitherto been limited by the need for specimens with good quality intact RNA. Here, we demonstrated the use of formalin-fixed paraffin-embedded tissues in microarray experiments to identify genes differentially expressed between cancerous and normal oral tissues. Forty-three tissue samples were macrodissected and gene expression analyses were conducted using the Illumina DASL assay. We report RNA yield of 2.4 and 0.8 microg/mm(3) from tumour and normal tissues, respectively and this correlated directly with the tissue volume used for RNA extraction. Using unsupervised hierarchical clustering, distinct gene expression profiles for tumour and normal samples could be generated, and differentially expressed genes could be identified. The majority of these genes were involved in regulation of apoptosis and cell cycle, metastasis and cell adhesion including BCL2A1, BIRC5, MMP1, MMP9 and ITGB4. Representative genes were further validated in independent samples suggesting that these genes may be directly associated with oral cancer development. The ability to conduct microarrays on formalin-fixed paraffin-embedded specimens represents a significant advancement that could open up avenues for finding genes that could be used as prognostication and predictive tools for cancer.
    Matched MeSH terms: Formaldehyde
  19. p53 codon 72 polymorphisms and random amplified polymorphic DNA analysis of non-melanoma skin cancer through archival formalin-fixed paraffin-embedded tissue
    Yoke-Kqueen C, Ab Mutalib NS, Sidik SM, Learn-Han L, Geok-Chin T
    Oncol Rep, 2012 Mar;27(3):753-63.
    PMID: 22159872 DOI: 10.3892/or.2011.1581
    Non-melanoma skin cancer (NMSC) is classified among the ten most frequent cancers in Malaysia. A common polymorphism at codon 72 of the p53 tumor suppressor gene and its influence on cancer risk has been studied for different types of cancer with mixed and inconsistent results with limited published data on the Malaysian population so far. In the present study, the frequency of p53 codon 72 polymorphism in 60 patients with NMSC was investigated from archival formalin-fixed paraffin-embedded (FFPE) tissue obtained from Hospital Universiti Kebangsaan Malaysia (HUKM). Additionally, random amplified polymorhic DNA -polymorphic chain reaction (RAPD-PCR) was employed for preliminary biomarker development. NMSC FFPE samples (70%) possess Arg/Arg, 20% with Pro/Pro and 10% with Arg/Pro. In total, there was no significant difference in the p53 codon 72 genotypes between histological types of NMSC, gender, race, tumor location and age group. However, there was an apparent age-associated increase in the Arg/Arg genotype but did not reach statistical significance (P=0.235). NMSC types and demographic characteristics did not influence genotype distribution. On the other hand, BCC and SCC distributions are influenced by age group, race and tumor location.
    Matched MeSH terms: Formaldehyde
  20. Expressions of spinal microglia activation, BDNF, and DREAM proteins correlated with formalin-induced nociceptive responses in painful and painless diabetic neuropathy rats
    Ismail CAN, Suppian R, Ab Aziz CB, Long I
    Neuropeptides, 2020 Feb;79:102003.
    PMID: 31902597 DOI: 10.1016/j.npep.2019.102003
    The complications of diabetic polyneuropathy (DN) determines its level of severity. It may occur with distinctive clinical symptoms (painful DN) or appears undetected (painless DN). This study aimed to investigate microglia activation and signalling molecules brain-derived neurotrophic factor (BDNF) and downstream regulatory element antagonist modulator (DREAM) proteins in spinal cord of streptozotocin-induced diabetic neuropathy rats. Thirty male Sprague-Dawley rats (200-230 g) were randomly assigned into three groups: (1) control, (2) painful DN and (3) painless DN. The rats were induced with diabetes by single intraperitoneal injection of streptozotocin (60 mg/kg) whilst control rats received citrate buffer as a vehicle. Four weeks post-diabetic induction, the rats were induced with chronic inflammatory pain by intraplantar injection of 5% formalin and pain behaviour responses were recorded and assessed. Three days later, the rats were sacrificed and lumbar enlargement region of spinal cord was collected. The tissue was immunoreacted against OX-42 (microglia), BDNF and DREAM proteins, which was also quantified by western blotting. The results demonstrated that painful DN rats exhibited increased pain behaviour score peripherally and centrally with marked increase of spinal activated microglia, BDNF and DREAM proteins expressions compared to control group. In contrast, painless DN group demonstrated a significant reduction of pain behaviour score peripherally and centrally with significant reduction of spinal activated microglia, BDNF and DREAM proteins expressions. In conclusions, the spinal microglia activation, BDNF and DREAM proteins correlate with the pain behaviour responses between the variants of DN.
    Matched MeSH terms: Formaldehyde/pharmacology
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links