Opportunistic routing is an emerging routing technology that was proposed to overcome the drawback of unreliable transmission, especially in Wireless Sensor Networks (WSNs). Over the years, many forwarder methods were proposed to improve the performance in opportunistic routing. However, based on existing works, the findings have shown that there is still room for improvement in this domain, especially in the aspects of latency, network lifetime, and packet delivery ratio. In this work, a new relay node selection method was proposed. The proposed method used the minimum or maximum range and optimum energy level to select the best relay node to forward packets to improve the performance in opportunistic routing. OMNeT++ and MiXiM framework were used to simulate and evaluate the proposed method. The simulation settings were adopted based on the benchmark scheme. The evaluation results showed that our proposed method outperforms in the aspect of latency, network lifetime, and packet delivery ratio as compared to the benchmark scheme.
Matched MeSH terms: Computer Communication Networks
This paper presents an ultralow profile, low passive intermodulation (PIM), and super-wideband in-building ceiling mount antenna that covers both the cellular and public safety ultra high frequency (UHF) band for distributed antenna system (DAS) applications. The proposed antenna design utilizes a modified 2-D planar discone design concept that is miniaturized to fit into a small disc-shaped radome. The 2-D planar discone has an elliptical-shaped disc monopole and a bell-shaped ground plane, a stub at the shorting path, with asymmetrical structure and an additional proximity coupling patch to maximize the available electrical path to support the 350 MHz band range. The proposed design maximizes the radome area with a reduction of about 62% compared to similar concept type antennas. Besides, the proposed design exhibits an improved radiation pattern with null reduction compared to a typical dipole/monopole when lies at the horizontal plane. A prototype was manufactured to demonstrate the antenna performance. The VSWR and radiation pattern results agreed with the simulated results. The proposed antenna achieves a band ratio of 28.57:1 while covering a frequency range of 350-10,000 MHz. The measured passive intermodulation levels are better than -150 dBc (2 × 20 Watts) for 350, 700 and 1920 MHz bands.
Matched MeSH terms: Computer Communication Networks
A significant increase has been observed in the use of Underwater Wireless Sensor Networks (UWSNs) over the last few decades. However, there exist several associated challenges with UWSNs, mainly due to the nodes' mobility, increased propagation delay, limited bandwidth, packet duplication, void holes, and Doppler/multi-path effects. To address these challenges, we propose a protocol named "An Efficient Routing Protocol based on Master-Slave Architecture for Underwater Wireless Sensor Network (ERPMSA-UWSN)" that significantly contributes to optimizing energy consumption and data packet's long-term survival. We adopt an innovative approach based on the master-slave architecture, which results in limiting the forwarders of the data packet by restricting the transmission through master nodes only. In this protocol, we suppress nodes from data packet reception except the master nodes. We perform extensive simulation and demonstrate that our proposed protocol is delay-tolerant and energy-efficient. We achieve an improvement of 13% on energy tax and 4.8% on Packet Delivery Ratio (PDR), over the state-of-the-art protocol.
Matched MeSH terms: Computer Communication Networks
Wireless sensor networks (WSNs) are often deployed in hostile environments, where an adversary can physically capture some of the sensor nodes. The adversary collects all the nodes' important credentials and subsequently replicate the nodes, which may expose the network to a number of other security attacks, and eventually compromise the entire network. This harmful attack where a single or more nodes illegitimately claims an identity as replicas is known as the node replication attack. The problem of node replication attack can be further aggravated due to the mobile nature in WSN. In this paper, we propose an extended version of multi-level replica detection technique built on Danger Theory (DT), which utilizes a hybrid approach (centralized and distributed) to shield the mobile wireless sensor networks (MWSNs) from clone attacks. The danger theory concept depends on a multi-level of detections; first stage (highlights the danger zone (DZ) by checking the abnormal behavior of mobile nodes), second stage (battery check and random number) and third stage (inform about replica to other networks). The DT method performance is highlighted through security parameters such as false negative, energy, detection time, communication overhead and delay in detection. The proposed approach also demonstrates that the hybrid DT method is capable and successful in detecting and mitigating any malicious activities initiated by the replica. Nowadays, crimes are vastly increasing and it is crucial to modify the systems accordingly. Indeed, it is understood that the communication needs to be secured by keen observation at each level of detection. The simulation results show that the proposed approach overcomes the weaknesses of the previous and existing centralized and distributed approaches and enhances the performance of MWSN in terms of communication and memory overhead.
Matched MeSH terms: Computer Communication Networks
OpenFlow makes a network highly flexible and fast-evolving by separating control and data planes. The control plane thus becomes responsive to changes in topology and load balancing requirements. OpenFlow also offers a new approach to handle security threats accurately and responsively. Therefore, it is used as an innovative firewall that acts as a first-hop security to protect networks against malicious users. However, the firewall provided by OpenFlow suffers from Internet protocol version 6 (IPv6) fragmentation, which can be used to bypass the OpenFlow firewall. The OpenFlow firewall cannot identify the message payload unless the switch implements IPv6 fragment reassembly. This study tests the IPv6 fragmented packets that can evade the OpenFlow firewall, and proposes a new mechanism to guard against attacks carried out by malicious users to exploit IPv6 fragmentation loophole in OpenFlow networks. The proposed mechanism is evaluated in a simulated environment by using six scenarios, and results exhibit that the proposed mechanism effectively fixes the loophole and successfully prevents the abuse of IPv6 fragmentation in OpenFlow networks.
Matched MeSH terms: Computer Communication Networks
The global expansion of the Visual Internet of Things (VIoT)'s deployment with multiple devices and sensor interconnections has been widespread. Frame collusion and buffering delays are the primary artifacts in the broad area of VIoT networking applications due to significant packet loss and network congestion. Numerous studies have been carried out on the impact of packet loss on Quality of Experience (QoE) for a wide range of applications. In this paper, a lossy video transmission framework for the VIoT considering the KNN classifier merged with the H.265 protocols. The performance of the proposed framework was assessed while considering the congestion of encrypted static images transmitted to the wireless sensor networks. The performance analysis of the proposed KNN-H.265 protocol is compared with the existing traditional H.265 and H.264 protocols. The analysis suggests that the traditional H.264 and H.265 protocols cause video conversation packet drops. The performance of the proposed protocol is estimated with the parameters of frame number, delay, throughput, packet loss ratio, and Peak Signal to Noise Ratio (PSNR) on MATLAB 2018a simulation software. The proposed model gives 4% and 6% better PSNR values than the existing two methods and better throughput.
Matched MeSH terms: Computer Communication Networks
The Internet of Things (IoT) uses wireless networks without infrastructure to install a huge number of wireless sensors that track system, physical, and environmental factors. There are a variety of WSN uses, and some well-known application factors include energy consumption and lifespan duration for routing purposes. The sensors have detecting, processing, and communication capabilities. In this paper, an intelligent healthcare system is proposed which consists of nano sensors that collect real-time health status and transfer it to the doctor's server. Time consumption and various attacks are major concerns, and some existing techniques contain stumbling blocks. Therefore, in this research, a genetic-based encryption method is advocated to protect data transmitted over a wireless channel using sensors to avoid an uncomfortable data transmission environment. An authentication procedure is also proposed for legitimate users to access the data channel. Results show that the proposed algorithm is lightweight and energy efficient, and time consumption is 90% lower with a higher security ratio.
Matched MeSH terms: Computer Communication Networks
A novel hybrid Harris Hawk-Arithmetic Optimization Algorithm (HHAOA) for optimizing the Industrial Wireless Mesh Networks (WMNs) and real-time pressure process control was proposed in this research article. The proposed algorithm uses inspiration from Harris Hawk Optimization and the Arithmetic Optimization Algorithm to improve position relocation problems, premature convergence, and the poor accuracy the existing techniques face. The HHAOA algorithm was evaluated on various benchmark functions and compared with other optimization algorithms, namely Arithmetic Optimization Algorithm, Moth Flame Optimization, Sine Cosine Algorithm, Grey Wolf Optimization, and Harris Hawk Optimization. The proposed algorithm was also applied to a real-world industrial wireless mesh network simulation and experimentation on the real-time pressure process control system. All the results demonstrate that the HHAOA algorithm outperforms different algorithms regarding mean, standard deviation, convergence speed, accuracy, and robustness and improves client router connectivity and network congestion with a 31.7% reduction in Wireless Mesh Network routers. In the real-time pressure process, the HHAOA optimized Fractional-order Predictive PI (FOPPI) Controller produced a robust and smoother control signal leading to minimal peak overshoot and an average of a 53.244% faster settling. Based on the results, the algorithm enhanced the efficiency and reliability of industrial wireless networks and real-time pressure process control systems, which are critical for industrial automation and control applications.
Matched MeSH terms: Computer Communication Networks
Covert channels are not new in computing systems, and have been studied since their first definition four decades ago. New platforms invoke thorough investigations to assess their security. Now is the time for Android platform to analyze its security model, in particular the two key principles: process-isolation and the permissions system. Aside from all sorts of malware, one threat proved intractable by current protection solutions, that is, collusion attacks involving two applications communicating over covert channels. Still no universal solution can countermeasure this sort of attack unless the covert channels are known. This paper is an attempt to reveal a new covert channel, not only being specific to smartphones, but also exploiting an unusual resource as a vehicle to carry covert information: sensors data. Accelerometers generate signals that reflect user motions, and malware applications can apparently only read their data. However, if the vibration motor on the device is used properly, programmatically produced vibration patterns can encode stolen data and hence an application can cause discernible effects on acceleration data to be received and decoded by another application. Our evaluations confirmed a real threat where strings of tens of characters could be transmitted errorless if the throughput is reduced to around 2.5-5 bps. The proposed covert channel is very stealthy as no unusual permissions are required and there is no explicit communication between the colluding applications.
Matched MeSH terms: Computer Communication Networks/trends*
Wireless Body Sensor Networks (WBSNs) constitute a subset of Wireless Sensor Networks (WSNs) responsible for monitoring vital sign-related data of patients and accordingly route this data towards a sink. In routing sensed data towards sinks, WBSNs face some of the same routing challenges as general WSNs, but the unique requirements of WBSNs impose some more constraints that need to be addressed by the routing mechanisms. This paper identifies various issues and challenges in pursuit of effective routing in WBSNs. Furthermore, it provides a detailed literature review of the various existing routing protocols used in the WBSN domain by discussing their strengths and weaknesses.
Matched MeSH terms: Computer Communication Networks*
A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.
Matched MeSH terms: Computer Communication Networks/instrumentation*
Service architectures are necessary for providing value-added services in telecommunications networks, including those in medical institutions. Separation of service logic and control from the actual call switching is the main idea of these service architectures, examples include Intelligent Network (IN), Telecommunications Information Network Architectures (TINA), and Open Service Access (OSA). In the Distributed Service Architectures (DSA), instances of the same object type can be placed on different physical nodes. Hence, the network performance can be enhanced by introducing load balancing algorithms to efficiently distribute the traffic between object instances, such that the overall throughput and network performance can be optimised. In this paper, we propose a new load balancing algorithm called "Node Status Algorithm" for DSA infrastructure applicable to electronic-based medical institutions. The simulation results illustrate that this proposed algorithm is able to outperform the benchmark load balancing algorithms-Random Algorithm and Shortest Queue Algorithm, especially under medium and heavily loaded network conditions, which are typical of the increasing bandwidth utilization and processing requirements at paperless hospitals and in the telemedicine environment.
Matched MeSH terms: Computer Communication Networks/organization & administration*
Recent years have witnessed a growing interest in deploying large populations of microsensors that collaborate in a distributed manner to gather and process sensory data and deliver them to a sink node through wireless communications systems. Currently, there is a lot of interest in data routing for Wireless Sensor Networks (WSNs) due to their unique challenges compared to conventional routing in wired networks. In WSNs, each data routing approach follows a specific goal (goals) according to the application. Although the general goal of every data routing approach in WSNs is to extend the network lifetime and every approach should be aware of the energy level of the nodes, data routing approaches may focus on one (or some) specific goal(s) depending on the application. Thus, existing approaches can be categorized according to their routing goals. In this paper, the main goals of data routing approaches in sensor networks are described. Then, the best known and most recent data routing approaches in WSNs are classified and studied according to their specific goals.
Matched MeSH terms: Computer Communication Networks*
Wireless Sensor Networks (WSNs) are vulnerable to clone attacks or node replication attacks as they are deployed in hostile and unattended environments where they are deprived of physical protection, lacking physical tamper-resistance of sensor nodes. As a result, an adversary can easily capture and compromise sensor nodes and after replicating them, he inserts arbitrary number of clones/replicas into the network. If these clones are not efficiently detected, an adversary can be further capable to mount a wide variety of internal attacks which can emasculate the various protocols and sensor applications. Several solutions have been proposed in the literature to address the crucial problem of clone detection, which are not satisfactory as they suffer from some serious drawbacks. In this paper we propose a novel distributed solution called Random Walk with Network Division (RWND) for the detection of node replication attack in static WSNs which is based on claimer-reporter-witness framework and combines a simple random walk with network division. RWND detects clone(s) by following a claimer-reporter-witness framework and a random walk is employed within each area for the selection of witness nodes. Splitting the network into levels and areas makes clone detection more efficient and the high security of witness nodes is ensured with moderate communication and memory overheads. Our simulation results show that RWND outperforms the existing witness node based strategies with moderate communication and memory overheads.
Matched MeSH terms: Computer Communication Networks/instrumentation*
Multiparty transactional frameworks--i.e. Electronic Data Interchange (EDI) or Health Level (HL) 7--often result in composite documents which can be accurately modelled using hyperlinked document-objects. The structural complexity arising from multiauthor involvement and transaction-specific sequencing would be poorly handled by conventional digital signature schemes based on a single evaluation of a one-way hash function and asymmetric cryptography. In this paper we outline the generation of structure-specific authentication hash-trees for the the authentication of transactional document-objects, followed by asymmetric signature generation on the hash-tree value. Server-side multi-client signature verification would probably constitute the single most compute-intensive task, hence the motivation for our usage of the Rabin signature protocol which results in significantly reduced verification workloads compared to the more commonly applied Rivest-Shamir-Adleman (RSA) protocol. Data privacy is handled via symmetric encryption of message traffic using session-specific keys obtained through key-negotiation mechanisms based on discrete-logarithm cryptography. Individual client-to-server channels can be secured using a double key-pair variation of Diffie-Hellman (DH) key negotiation, usage of which also enables bidirectional node authentication. The reciprocal server-to-client multicast channel is secured through Burmester-Desmedt (BD) key-negotiation which enjoys significant advantages over the usual multiparty extensions to the DH protocol. The implementation of hash-tree signatures and bi/multidirectional key negotiation results in a comprehensive cryptographic framework for multiparty document-objects satisfying both authentication and data privacy requirements.
Matched MeSH terms: Computer Communication Networks*
In this paper, we present a Java-based framework for the processing, storage and delivery of Electronic Medical Records (EMR). The choice of Java as a developmental and operational environment ensures operability over a wide-range of client-side platforms, with our on-going work emphasising migration towards Extensible Markup Language (XML) capable Web browser clients. Telemedicine in support of womb-to-tomb healthcare as articulated by the Multimedia Supercorridor (MSC) Telemedicine initiative--which motivated this project--will require high-volume data exchange over an insecure public-access Wide Area Network (WAN), thereby requiring a hybrid cryptosystem with both symmetric and asymmetric components. Our prototype framework features a pre-transaction authentication and key negotiation sequence which can be readily modified for client-side environments ranging from Web browsers without local storage capability to workstations with serial connectivity to a tamper-proof device, and also for point-to-multipoint transaction processes.
Matched MeSH terms: Computer Communication Networks*
A system for computerising full blood picture reporting developed in-house using dBASE IV on IBM-compatible microcomputers in a local area network environment is described. The software package has a user-friendly interface which consists of a horizontal main menu bar with associated pull-down submenus. The package captures data directly from an automatic blood cell counter and provides options to modify or delete records, search for records, print interim, final or cumulative reports, record differential counts with an emulator, facilitate house-keeping activities which include backing-up databases and repairing corrupted indices. The implementation of this system has helped to improve the efficiency of reporting full blood picture in the haematology laboratory.
Matched MeSH terms: Computer Communication Networks*
A number of health databases is now available in Malaysia, but few are accessible to the general public. However, recently a service was launched nationwide via a videotex system to also target the Malaysia public. This service is provided by the School of Pharmaceutical Sciences, Universiti Sains Malaysia (USM) in collaboration with several Malaysian Government ministries and agencies. Access to health information via videotex, be it medical, pharmaceutical or environmental is viewed as an effective means of on-line information dissemination. It provides not only rapid retrieval but is also economical and interactive, particularly suitable for a developing country.
Matched MeSH terms: Computer Communication Networks/organization & administration*
Localization of the wireless sensor network is a vital area acquiring an impressive research concern and called upon to expand more with the rising of its applications. As localization is gaining prominence in wireless sensor network, it is vulnerable to jamming attacks. Jamming attacks disrupt communication opportunity among the sender and receiver and deeply impact the localization process, leading to a huge error of the estimated sensor node position. Therefore, detection and elimination of jamming influence are absolutely indispensable. Range-based techniques especially Received Signal Strength (RSS) is facing severe impact of these attacks. This paper proposes algorithms based on Combination Multiple Frequency Multiple Power Localization (C-MFMPL) and Step Function Multiple Frequency Multiple Power Localization (SF-MFMPL). The algorithms have been tested in the presence of multiple types of jamming attacks including capture and replay, random and constant jammers over a log normal shadow fading propagation model. In order to overcome the impact of random and constant jammers, the proposed method uses two sets of frequencies shared by the implemented anchor nodes to obtain the averaged RSS readings all over the transmitted frequencies successfully. In addition, three stages of filters have been used to cope with the replayed beacons caused by the capture and replay jammers. In this paper the localization performance of the proposed algorithms for the ideal case which is defined by without the existence of the jamming attack are compared with the case of jamming attacks. The main contribution of this paper is to achieve robust localization performance in the presence of multiple jamming attacks under log normal shadow fading environment with a different simulation conditions and scenarios.
Matched MeSH terms: Computer Communication Networks*
In heterogeneous wireless networks, wireless local area network (WLAN) is highly preferred by mobile terminals (MTs) owing to its high transmission bandwidth and low access cost. However, in high-speed environment, handover from a cellular network to a WLAN cell will lead to a high number of handover failures and unnecessary handovers due to the WLAN coverage limitation and will become worse at high speed. A new vertical handover method is proposed to minimize the probability of handover failure and unnecessary handover while maximizing the usage of WLAN in high-speed environment. The simulation results show that the proposed method kept the probability of handover failure and unnecessary handover below 0.5% and 1%, respectively. Compared with previous studies, the proposed method reduced the number of handover failures and unnecessary handovers up to 80.0% and 97.7%, respectively, while the MT is highly mobile. Using the proposed prediction method, the MT can benefit high bandwidth and low network access cost from the WLAN with minimum interruption regardless of speed.
Matched MeSH terms: Computer Communication Networks/instrumentation*