Displaying publications 41 - 60 of 87 in total

Abstract:
Sort:
  1. Tey NP, Lai SL, Teh JK
    Maturitas, 2016 Dec;94:39-45.
    PMID: 27823743 DOI: 10.1016/j.maturitas.2016.08.016
    OBJECTIVES: The aims of this study were to assess the current sharp rise in chronic diseases and disabilities with advancing age, and to examine the debilitating effects of chronic diseases among the oldest old in China.

    STUDY DESIGN AND OUTCOME VARIABLES: This study used data from four waves of the Chinese Longitudinal Health and Longevity Survey (CLHLS) conducted in 2002, 2005, 2008 and 2011. The sample comprised 2137 older adults who were interviewed in 2002 and re-interviewed in the following waves. Cross-tabulations were run to show the rise in chronic disease and disability with age. Ordinal logistic regression was run to examine the debilitating effects of these diseases in terms of the ability of the oldest old to perform activities of daily living.

    RESULTS: The prevalence of chronic diseases rose sharply with age. The prevalence rate of six major diseases increased between 38% (respiratory diseases) and 533% (neurological disorder) among respondents who were re-interviewed nine years later. Cardiovascular diseases were the most common. Neurological disorder and cancer were less common, but had the most debilitating effects on patients. Overall, 10.0%, 3.1% and 3.1% of the respondents were disabled by cardiovascular, musculoskeletal and sensorial diseases, respectively. Ordinal logistic regression showed that neurological disorder had the strongest debilitating effects, followed by musculoskeletal and cardiovascular diseases among 2137 older persons who had survived and were followed up from the base year (2002) through 2011.

    CONCLUSION: The rapid rise in chronic diseases has resulted in an increased burden of disability among the oldest old in China. There is a need to improve health care systems for the prevention and management of chronic diseases.

    Matched MeSH terms: Longevity*
  2. Tee LF, Neoh HM, Then SM, Murad NA, Asillam MF, Hashim MH, et al.
    Life Sci Space Res (Amst), 2017 Nov;15:11-17.
    PMID: 29198309 DOI: 10.1016/j.lssr.2017.06.002
    Studies of multigenerational Caenorhabditis elegans exposed to long-term spaceflight have revealed expression changes of genes involved in longevity, DNA repair, and locomotion. However, results from spaceflight experiments are difficult to reproduce as space missions are costly and opportunities are rather limited for researchers. In addition, multigenerational cultures of C. elegans used in previous studies contribute to mixture of gene expression profiles from both larvae and adult worms, which were recently reported to be different. Usage of different culture media during microgravity simulation experiments might also give rise to differences in the gene expression and biological phenotypes of the worms. In this study, we investigated the effects of simulated microgravity on the gene expression and biological phenotype profiles of a single generation of C. elegans worms cultured on 2 different culture media. A desktop Random Positioning Machine (RPM) was used to simulate microgravity on the worms for approximately 52 to 54 h. Gene expression profile was analysed using the Affymetrix GeneChip® C. elegans 1.0 ST Array. Only one gene (R01H2.2) was found to be downregulated in nematode growth medium (NGM)-cultured worms exposed to simulated microgravity. On the other hand, eight genes were differentially expressed for C. elegans Maintenance Medium (CeMM)-cultured worms in microgravity; six were upregulated, while two were downregulated. Five of the upregulated genes (C07E3.15, C34H3.21, C32D5.16, F35H8.9 and C34F11.17) encode non-coding RNAs. In terms of biological phenotype, we observed that microgravity-simulated worms experienced minimal changes in terms of lifespan, locomotion and reproductive capabilities in comparison with the ground controls. Taking it all together, simulated microgravity on a single generation of C. elegans did not confer major changes to their gene expression and biological phenotype. Nevertheless, exposure of the worms to microgravity lead to higher expression of non-coding RNA genes, which may play an epigenetic role in the worms during longer terms of microgravity exposure.
    Matched MeSH terms: Longevity/drug effects
  3. Bello RO, Abdullah MA, Abd Majid R, Chin VK, Abd Rachman Isnadi MF, Ibraheem ZO, et al.
    Malar J, 2019 Dec 19;18(1):434.
    PMID: 31856836 DOI: 10.1186/s12936-019-3070-x
    BACKGROUND: The immune modulating potential of IL-35 in multiple human disorders has been reported. Consequent upon the recognition of inflammatory cytokine activation and its preponderance for mediating pathology during malaria infection, the study aimed to characterize the expression and functional contribution(s) of IL-35 in Plasmodium berghei (strain ANKA) infected mice.

    METHODS: Plasmodium berghei infection in male ICR mice was used as the rodent model of choice. The time course of IL-35 expression in the systemic circulation and tissues of P. berghei infected mice as well as their healthy control counterparts was assessed by enzyme linked immunosorbent assay and immunohistochemistry respectively. The effect of modulating IL-35 by recombinant IL-35 protein or neutralizing anti-Epstein-Barr virus-induced gene 3 antibody on the cytokine environment during P. berghei infection was assessed by flow cytometry. Furthermore, the influence of modulating IL-35 on histopathological hallmarks of malaria and disease progression was evaluated.

    RESULTS: Interleukin-35 was significantly up regulated in serum and tissues of P. berghei infected mice and correlated with parasitaemia. Neutralization of IL-35 significantly enhanced the release of IFN-γ, decreased the expression of IL-6 and decreased parasitaemia patency. Neutralization of IL-35 was also associated with a tendency towards increased survival as well as the absence of pathological features associated with malaria infection unlike recombinant IL-35 protein administration which sustained a normal course of infection and unfavourable malaria associated histological outcomes in P. berghei infected mice.

    CONCLUSION: These results indicate the involvement of IL-35 in P. berghei induced malaria infection. IL-35 neutralization strategies may represent viable therapeutic modalities beneficial for the resolution of malaria infection.

    Matched MeSH terms: Longevity/drug effects
  4. How YF, Lee CY
    Med Vet Entomol, 2010 Jun;24(2):108-16.
    PMID: 20202109 DOI: 10.1111/j.1365-2915.2010.00852.x
    This study examined the fecundity, oviposition, nymphal development and longevity of field-collected samples of the tropical bedbug, Cimex hemipterus (Fabricius) (Hemiptera: Cimicidae). Under environmental conditions of 26+/-2 degrees C, 70 +/- 5% relative humidity and a 12-h photoperiod, with bloodmeals provided by a human host, six strains of tropical bedbug had a fecundity of up to 50 eggs per lifetime, over 11-14 oviposition cycles. Increased feeding frequency improved fecundity. After feeding and mating, adult females normally took 2-3 days to produce a first batch of eggs. The oviposition period lasted 2-7 days before cessation of the oviposition cycle. The egg incubation period usually lasted 5-7 days before the emergence of first instars. The nymphs underwent five stadia (the first four of which each took 3-4 days, whereas the last took 4-5 days) before becoming adults at a sex ratio of 1 : 1. More than five bloodmeals were required by the nymphs to ensure a successful moult. Unmated adults lived significantly longer than mated adults (P < 0.05). Unmated females lived up to almost 7 months, but the longevity of mated males and females did not differ significantly (P > 0.05).
    Matched MeSH terms: Longevity/physiology*
  5. Perak AM, Marino BS, de Ferranti SD
    Pediatrics, 2018 Apr;141(4).
    PMID: 29588338 DOI: 10.1542/peds.2017-2075
    Matched MeSH terms: Longevity/physiology*
  6. Mariapun J, Hairi NN, Ng CW
    PLoS One, 2016;11(6):e0158685.
    PMID: 27362581 DOI: 10.1371/journal.pone.0158685
    INTRODUCTION: Socioeconomic inequalities in health represent unfairness in the health distribution of a population. Efforts to produce information on mortality distributions in many low and middle income countries (LMICs) are mostly hampered by lack of data disaggregated by socioeconomic groups. In this paper we describe how mortality statistics obtained from multiple data sources were combined to provide an evaluation of the socioeconomic distribution of mortality in Malaysia, a LMIC located in the Asia Pacific region.

    METHODS: This study has an ecological design. As a measure of socioeconomic status, we used principal component analysis to construct a socioeconomic index using census data. Districts were ranked according to the standardised median index of households and assigned to each individual in the 5-year mortality data. The mortality indicators of interest were potential years of life lost (PYLL), standardised mortality ratio (SMR), infant mortality rate (IMR) and under-5 mortality rate (U5MR). Both socioeconomic status and mortality outcomes were used compute the concentration index which provided the summary measure of the magnitude of inequality.

    RESULTS: Socially disadvantaged districts were found to have worse mortality outcomes compared to more advantaged districts. The values of the concentration index for the overall population of the Peninsula are C = -0.1334 (95% CI: -0.1605 to -0.1063) for the PYLL, C = -0.0685 (95% CI: -0.0928 to -0.0441) for the SMR, C = -0.0997 (95% CI: -0.1343 to -0.0652) for the IMR and C = -0.1207 (95% CI: -0.1523 to -0.0891) for the U5MR. Mortality outcomes within ethnic groups were also found to be less favourable among the poor.

    CONCLUSION: The findings of this study suggest that socioeconomic inequalities disfavouring the poor exist in Malaysia.

    Matched MeSH terms: Longevity*
  7. Kohyama TS, Potts MD, Kohyama TI, Kassim AR, Ashton PS
    Am Nat, 2015 Mar;185(3):367-79.
    PMID: 25674691 DOI: 10.1086/679664
    Different mechanisms have been proposed to explain how vertical and horizontal heterogeneity in light conditions enhances tree species coexistence in forest ecosystems. The foliage partitioning theory proposes that differentiation in vertical foliage distribution, caused by an interspecific variation in mortality-to-growth ratio, promotes stable coexistence. In contrast, successional niche theory posits that horizontal light heterogeneity, caused by gap dynamics, enhances species coexistence through an interspecific trade-off between growth rate and survival. To distinguish between these theories of species coexistence, we analyzed tree inventory data for 370 species from the 50-ha plot in Pasoh Forest Reserve, Malaysia. We used community-wide Bayesian models to quantify size-dependent growth rate and mortality of every species. We compared the observed size distributions and the projected distributions from size-dependent demographic rates. We found that the observed size distributions were not simply correlated with the rate of population increase but were related to demographic properties such as size growth rate and mortality. Species with low relative abundance of juveniles in size distribution showed high growth rate and low mortality at small tree sizes and low per-capita recruitment rate. Overall, our findings were in accordance with those predicted by foliage partitioning theory.
    Matched MeSH terms: Longevity
  8. Nasir NF, Kannan TP, Sulaiman SA, Shamsuddin S, Azlina A, Stangaciu S
    Age (Dordr), 2015 Jun;37(3):9797.
    PMID: 26028466 DOI: 10.1007/s11357-015-9797-6
    The belief that beekeepers live longer than anyone else is present since ages. However, no research has been done to explore the longevity of life in beekeepers. Here, we investigated the telomere length in 30 male beekeepers and 30 male non-beekeepers and associated them with the longevity of life using Southern analysis of terminal restriction fragments (TRFs) generated by Hinf I/Rsa I digestion of human genomic DNA using TeloTAGGG Telomere Length Assay. Interestingly, we found that the telomere length of male beekeepers was significantly longer than those of male non-beekeepers with a p value of less than 0.05, suggesting that beekeepers may have longer life compared to non-beekeepers. We further found that the consumption of bee products for a long period and frequent consumption of bee products per day are associated with telomere length. An increase of year in consuming bee products is associated with a mean increase in telomere length of 0.258 kbp. In addition, an increase in frequency of eating bee products per day was also associated with a mean increase of 2.66 kbp in telomere length. These results suggested that bee products might play some roles in telomere length maintenance.
    Matched MeSH terms: Longevity
  9. Eleena Mohd Yusof, Mei, May Lei, Walls, Angus
    MyJurnal
    Objective: To conduct a systematic review of identifying the clinical efficacy of caries preventive interventions in community-dwelling elders. Background: As the human lifespan increases, the elders are known to retain their teeth for longer. Therefore, the need to uncover effective ways of preventing caries among this age group is relevant. Methods: A search was conducted using four databases: Cochrane, MEDLINE, EMBASE and Web of Science using the keywords (caries OR demineralization) AND prevention AND (adult OR aged). The titles and abstracts were initially screened for the use of caries prevention interventions. Studies were excluded based on the predetermined criteria. The full texts of the remaining studies were then evaluated. Results: Of 6952 articles identified from the search, fifty full texts were evaluated. Finally, ten studies were analyzed. One study found rinsing with 0.05% of NaF twice daily resulted in lower coronal caries increment. Another study reported the use of 1,100 ppm of NaF dentifrice twice daily showed lower percentage of coronal and root caries. A reduction of root caries was observed from using 5,000 ppm fluoridated toothpaste twice daily, annual professional 38% SDF solution application, six-monthly professional cleaning and APF gel application. The use of 0.12% CHX rinse and xylitol chewing gum did not show reduction of caries incidence. Conclusion: Toothbrushing with 5,000 ppm of NaF dentifrice, rinsing with 0.05% NaF, professional application of 38% SDF solution and APF gel may be effective at preventing caries among the elders.
    Matched MeSH terms: Longevity
  10. Jiang H, Peng H, Guo H, Zeng Y, Li L, Zhang Y, et al.
    ACS Appl Mater Interfaces, 2020 Nov 18;12(46):51344-51356.
    PMID: 33146507 DOI: 10.1021/acsami.0c13139
    Thin-film lithium-ion microbatteries with a high energy density and long lifespan are exceedingly desired for developing self-powered integrated micro-nano devices and systems. However, exploring high-performance thin-film anodes still remains a challenge. Herein, a double-layer-structure diamond-like carbon-ZnS (DLC-ZnS) thin-film anode fabricated by radio frequency magnetron sputtering exhibits high specific capacity and good cycling stability up to 1000 cycles, superior to the pure ZnS thin-film anode. To understand the mechanism, the bimodal amplitude modulated-frequency modulated atomic force microscopy was used to explore the mechanical properties of the thin films, and the DLC layer shows significantly higher Young's modulus than the ZnS thin film. The DLC interface with a high Young's modulus can effectively buffer the mechanical stress originating from the huge volume changes of the ZnS layer during lithiation/delithiation processes; therefore, the DLC interface maintains the higher mechanical integrity of the DLC-ZnS thin film and improves the utilization of ZnS. In addition, the electrochemical kinetics of the DLC-ZnS and ZnS thin films were also investigated by electrochemical methods. Electrochemical impedance spectroscopy tests indicate the obstacle of the DLC interface to Li+ ion diffusion in the initial charge/discharge processes; however, the DLC-ZnS thin film exhibits lower total resistance than the ZnS thin film afterward. In particular, galvanostatic intermittent titration technique tests were performed to find out the differences between the two thin films during the galvanostatical charge/discharge processes. The results demonstrate the obviously enhanced conversion reaction reversibility and decreased alloy reaction polarization of the DLC-ZnS thin film; therefore, it delivers higher reversible capacity.
    Matched MeSH terms: Longevity
  11. Nurul Farahah Bahari, Nur Iffah Izzaty Jamal, John, Jacob
    Ann Dent, 2019;26(1):8-14.
    MyJurnal
    This cross sectional study investigated the clinical and radiographic status of crowned teeth with and without root canal treatment. The study used secondary data from records of patients who received crown treatment at the Faculty of Dentistry, University of Malaya before 2015 and walk-in patients attending the primary care clinic between July - December 2016. The inclusion criterion was crown fitted for more than 12 months. Once identified, the patients were assessed for clinical and radiographic status. Data were entered into and analysed using SPSS Version 20 software. A total of 66 crowns [35 root canal treated (RCT) and 31 non-root canal treated (n-RCT)] were identified. Chi-square test was carried out to determine the health of crowned teeth and for its longevity in the oral cavity. There were 43 crowns (46.5% RCT; 53.5% n-RCT) with plaque accumulation, 15 (66.7% RCT; 33.3% n-RCT) with gingival swelling/recession, 17 (46.5% RCT; 53.5% n-RCT) with widening of the periodontal ligament, 13 (53.8% RCT; 46.2% n-RCT) with bone loss and 5 (60% RCT; 40% n-RCT) crowns with periapical lesion. There was no statistically significant difference except for poorer alveolar bone condition for crowns that have been in the mouth for >10 years. Based on the study, no significant adverse pulpal involvement between crown with RCT and crown without RCT was observed.
    Matched MeSH terms: Longevity
  12. Shahabudin N, Yahya R, Gan SN
    Polymers (Basel), 2016 Apr 06;8(4).
    PMID: 30979216 DOI: 10.3390/polym8040125
    One of the approaches to prolong the service lifespan of polymeric material is the development of self-healing ability by means of embedded microcapsules containing a healing agent. In this work, poly(melamine-urea-formaldehyde) (PMUF) microcapsules containing a palm oil-based alkyd were produced by polymerization of melamine resin, urea and formaldehyde that encapsulated droplets of the suspended alkyd particles. A series of spherical and free-flowing microcapsules were obtained. The chemical properties of core and shell materials were characterized by Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Differential scanning calorimetry (DSC) analysis showed a glass transition around -15 °C due to the alkyd, and a melting temperature at around 200 °C due to the shell. Thermogravimetric analysis (TGA) results showed that the core and shell thermally degraded within the temperature range of 200⁻600 °C. Field emission scanning electron microscope (FESEM) examination of the ruptured microcapsule showed smooth inner and rough outer surfaces of the shell. Flexural strength and microhardness (Vickers) of the cured epoxy compound were not affected with the incorporation of 1%⁻3% of the microcapsules. The viability of the healing reactions was demonstrated by blending small amounts of alkyd with epoxy and hardener at different ratios. The blends could readily cure to non-sticky hard solids at room temperature and the reactions could be verified by ATR-FTIR.
    Matched MeSH terms: Longevity
  13. Fayaz H, Afzal A, Samee ADM, Soudagar MEM, Akram N, Mujtaba MA, et al.
    PMID: 33935484 DOI: 10.1007/s11831-021-09571-0
    Covid-19 has given one positive perspective to look at our planet earth in terms of reducing the air and noise pollution thus improving the environmental conditions globally. This positive outcome of pandemic has given the indication that the future of energy belong to green energy and one of the emerging source of green energy is Lithium-ion batteries (LIBs). LIBs are the backbone of the electric vehicles but there are some major issues faced by the them like poor thermal performance, thermal runaway, fire hazards and faster rate of discharge under low and high temperature environment,. Therefore to overcome these problems most of the researchers have come up with new methods of controlling and maintaining the overall thermal performance of the LIBs. The present review paper mainly is focused on optimization of thermal and structural design parameters of the LIBs under different BTMSs. The optimized BTMS generally demonstrated in this paper are maximum temperature of battery cell, battery pack or battery module, temperature uniformity, maximum or average temperature difference, inlet temperature of coolant, flow velocity, and pressure drop. Whereas the major structural design optimization parameters highlighted in this paper are type of flow channel, number of channels, length of channel, diameter of channel, cell to cell spacing, inlet and outlet plenum angle and arrangement of channels. These optimized parameters investigated under different BTMS heads such as air, PCM (phase change material), mini-channel, heat pipe, and water cooling are reported profoundly in this review article. The data are categorized and the results of the recent studies are summarized for each method. Critical review on use of various optimization algorithms (like ant colony, genetic, particle swarm, response surface, NSGA-II, etc.) for design parameter optimization are presented and categorized for different BTMS to boost their objectives. The single objective optimization techniques helps in obtaining the optimal value of important design parameters related to the thermal performance of battery cooling systems. Finally, multi-objective optimization technique is also discussed to get an idea of how to get the trade-off between the various conflicting parameters of interest such as energy, cost, pressure drop, size, arrangement, etc. which is related to minimization and thermal efficiency/performance of the battery system related to maximization. This review will be very helpful for researchers working with an objective of improving the thermal performance and life span of the LIBs.
    Matched MeSH terms: Longevity
  14. Mey LS, Khairudin R, Muda TEAT, Mokhtar DM, Kamaluddin MR
    Data Brief, 2020 Aug;31:105864.
    PMID: 32613044 DOI: 10.1016/j.dib.2020.105864
    Studies have consistently shown that childhood maltreatment is a significant risk factor for the development of drug addiction across human lifespan. Yet, little is known about the prevalence of childhood maltreatment history among drug addicts in Malaysia. The dataset presented in this article provides demographic information on 200 drug addicts recruited from two rehabilitation centres in Malaysia, the prevalence of different types of childhood maltreatment history and the correlation between all types of maltreatments. Analyses of the data can provide insights into the prevalence of maltreatment history and development of drug addiction, therefore indispensable for mental health professionals designing appropriate interventions for the drug addicts. The data can also provide baseline data for comparative studies in terms of childhood maltreatment history and drug addiction across different countries.
    Matched MeSH terms: Longevity
  15. Rahman AM, Jamayet NB, Nizami MMUI, Johari Y, Husein A, Alam MK
    J Prosthet Dent, 2021 Jan 17.
    PMID: 33472753 DOI: 10.1016/j.prosdent.2020.07.026
    STATEMENT OF PROBLEM: The climate of tropical Southeast Asia includes high humidity and ultraviolet radiation that reduce the lifespan of silicone prostheses by inducing changes in their mechanical properties and color stability. Studies on the surface roughness (SR) and mechanical properties of different silicone elastomers (SEs) subjected to the natural tropical weather of Southeast Asia are lacking.

    PURPOSE: The purpose of this in vitro study was to evaluate the SR, tensile strength (TS), and percentage elongation (% E) of different SEs subjected to outdoor weathering in the Malaysian climate.

    MATERIAL AND METHODS: Type-II dumbbell-shaped specimens (N-120) (nonweathered=15, weathered=15) were made from 3 room-temperature vulcanized (A-2000, A-2006, and A-103) and 1 heat-temperature vulcanized (M-511) silicone (Factor II). For 6 months, weathered specimens were subjected to outdoor weathering inside a custom exposure rack. Simultaneously, the nonweathered specimens were kept in a dehumidifier. Subsequently, the SR was measured with a profilometer; TS and % E were measured by using a universal testing machine. Two-way ANOVA was used to compare the means of the tested properties of the nonweathered and weathered specimens, and pairwise comparison was carried out between the silicones (α=.05).

    RESULTS: After outdoor weathering, the SR, TS, and % E were adversely affected by weathering in the Malaysian environment. Among the silicone materials, A-2000 showed the least TS changes (2.51 MPa), while A-2006 demonstrated significant changes in percentage elongation after outdoor weathering (266.5%). M-511 exhibited the highest mean value (2.50 μm) for SR changes. In addition, A-103 SE showed statistically significant differences in most pairwise comparisons for all 3 dependent variables.

    CONCLUSIONS: Based on the evaluation of mechanical properties, A-103 can be suggested as a suitable silicone for maxillofacial prostheses fabricated for tropical climates. However, A-2000 can be a suitable alternative, although significant changes to surface roughness were detected after outdoor weathering.

    Matched MeSH terms: Longevity
  16. Saad KA, Mohamad Roff MN, Hallett RH, Abd-Ghani IB
    Insect Sci, 2019 Feb;26(1):76-85.
    PMID: 28594105 DOI: 10.1111/1744-7917.12488
    Plant virus infections are known to alter host plant attractiveness and suitability for insect herbivores. This study was conducted to determine how cucumber mosaic virus (CMV)-infected chilli plants affect the fitness and settling preferences of nonvector whitefly, Bemisia tabaci adults under dual-choice conditions with volatile organic compounds analyzed using solid phase microextraction coupled with gas chromatography-mass spectrometry (GC-MS). Results showed that the presence of CMV in chilli plants substantially affects the settling preferences of the B. tabaci, which preferred to settle on noninfected plants. Duration of the egg stage and the longevity and fecundity of adult B. tabaci on CMV-infected chilli plants were not markedly different from those on noninfected chilli plants. In contrast, the developmental time from egg to adult was significantly reduced in CMV-infected chilli plants compared to the noninfected plants. The results also showed that CMV-infected chilli plants released significantly more linalool and phenylacetaldehyde than noninfected plants. Overall, it was suggested that the behavioral response of B. tabaci might be modified by CMV-infected plants, which alter the release of specific headspace volatiles. Based on these results, the modification of plant volatile profiles may help in enhancing the effectiveness of biological control and the protection of crop plants against B. tabaci.
    Matched MeSH terms: Longevity
  17. Baker PR, Francis DP, Mohd Hairi NN, Othman S, Choo WY
    Age Ageing, 2017 05 01;46(3):346-348.
    PMID: 27737827 DOI: 10.1093/ageing/afw186
    There is evidence that elder abuse is a significant public health problem that is destined to grow as population age. Countries are considering how best to act and this requires an understanding of the complex causal mechanisms contributing to its occurrence and the identification of effective interventions which can potentially make a difference. Previously, a high quality synthesis of evidence for policy and practice has been missing. In this paper, we describe a new Cochrane review of interventions to prevent the occurrence or reoccurrence of elder abuse. Overall, the quality of the evidence available for decision making is very low and there is little to guide practice. Amongst the interventions, there is some evidence that teaching coping skills to family carers of persons with dementia might make the situation better. We argue that poor quality and wasteful research needs to be avoided, and front-line agencies be supported in undertaking comparative evaluation of their services.
    Matched MeSH terms: Longevity
  18. Leow SS, Luu A, Shrestha S, Hayes KC, Sambanthamurthi R
    Exp Gerontol, 2018 Mar 15;106:198-221.
    PMID: 29550564 DOI: 10.1016/j.exger.2018.03.013
    Palm fruit juice (PFJ) containing oil palm phenolics is obtained as a by-product from oil palm (Elaeis guineensis) fruit milling. It contains shikimic acid, soluble fibre and various phenolic acids including p-hydroxybenzoic acid and three caffeoylshikimic acid isomers. PFJ has also demonstrated beneficial health properties in various biological models. Increasing concentrations of PFJ and different PFJ fractions were used to assess growth dynamics and possible anti-ageing properties in fruit flies (Drosophila melanogaster) genotype w1118. Microarray gene expression analysis was performed on whole fruit fly larvae and their fat bodies, after the larvae were fed a control Standard Brandeis Diet (SBD) with or without PFJ. Transcripts from Affymetrix GeneChips were utilised to identify the possible mechanisms involved, with genes having fold changes > |1.30| and p 
    Matched MeSH terms: Longevity
  19. Tafran K, Tumin M, Osman AF
    Iran J Public Health, 2020 Feb;49(2):294-303.
    PMID: 32461937
    Background: The primary indicator of public health, which all nations aim to prolong, is life expectancy at birth. Uncovering its socioeconomic determinants is key to extending life expectancy. This study examined the determinants of life expectancy in Malaysia.

    Methods: This observational study employs secondary data from various official sources of 12 states and one federal territory in Malaysia (2002-2014). Panel data of 78 observations (13 cross-sections at six points in time) were used in multivariate, fixed-effect, regressions to estimate the effects of socioeconomic variables on life expectancy at birth for male, female and both-gender.

    Results: Poverty and income significantly determine female, male, and total life expectancies. Unemployment significantly determines female and total life expectancies, but not male. Income inequality and public spending on health (as a percentage of total health spending) do not significantly determine life expectancy. The coefficients of the multivariate regressions suggest that a 1% reduction in poverty, 1% reduction in unemployment, and around USD 23.20 increase in household monthly income prolong total life expectancy at birth by 17.9, 72.0, and 16.3 d, respectively. The magnitudes of the effects of the socioeconomic variables on life expectancy vary somewhat by gender.

    Conclusion: Life expectancy in Malaysia is higher than the world average and higher than that in some developing countries in the region. However, it is far lower than the advanced world. Reducing poverty and unemployment and increasing income are three effective channels to enhance longevity.

    Matched MeSH terms: Longevity
  20. Vedamanikam VJ, Shazilli NA
    Bull Environ Contam Toxicol, 2008 Jun;80(6):516-20.
    PMID: 18414763 DOI: 10.1007/s00128-008-9413-x
    A study was conducted to determine the suitability of using selected aquatic dipterian larvae for biomonitoring bioassays. The organisms included a member of the biting midge family that was identified as Culicoides furens and a member of the non-biting midge family, identified as Chironomus plumosus. Median lethal toxicity tests were conducted to observe the variation between metal sensitivities between the two larval forms and how variations in temperature could affect the experimental setup. Nine heavy metals were used in the study. It was observed that the 96 h LC(50) (in mg/L) for the different metals was found to be Zn-16.21 (18.55 +/- 13.87); Cr-0.96 (1.08 +/- 0.84); Ag-4.22 (6.87 +/- 1.57); Ni-0.42 (0.59 +/- 0.25); Hg-0.42 (0.59 +/- 0.25); Pb-16.21 (18.31 +/- 14.11); Cu-42.24 (45.18 +/- 39.30); Mn-4.22 (7.19 +/- 1.25); Cd-0.42 (0.59 +/- 0.25) for the Chironomus plumosus and Zn-4.22 (6.56 +/- 1.88); Cr-0.42 (0.54 +/- 0.30); Ag-0.42 (0.54 +/- 0.30); Ni-0.42 (0.54 +/- 0.30); Hg-0.04 (0.07 +/- 0.01); Pb-0.42 (0.54 +/- 0.30); Cu-42.24 (45.18 +/- 39.30); Mn-4.22 (6.56 +/- 1.88); Cd-0.42 (0.54 +/- 0.30) in the case of the Culicoides furens. With temperature as a variable the LC(50) values were observed to increase from 2.51 mg/L at 10 degrees C to 4.22 ppm at 30 degrees C and to reduce slightly to 3.72 mg/L at 35 degrees C as seen in the case of Zn. It was also observed that at 40 degrees C thermal toxicity and chemical toxicity overlapped as 100% mortality was observed in the controls. This trend was observed in all metals for both C. plumosus and C. furens. Thus indicating temperature played an important role in determining LC(50) values of toxicants.
    Matched MeSH terms: Longevity/drug effects
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links