Displaying publications 61 - 80 of 89 in total

Abstract:
Sort:
  1. Annuar, W.A., Abdullah, H.
    Ann Dent, 2003;10(1):-.
    MyJurnal
    This study is conducted to compare two resin luting cements (Rely XTMARC,3M and Compolute™ESPE) on their microleakage with one composite inlay system (Filtek™ Z250 Universal Restorative Materials, 3M). Thirty conventional inlays, Class II MOIDO cavity with gingival margin I mm above the cementoenamel junction, were prepared in premolar teeth. The composite inlays were fabricated directly on the prepared teeth using layering technique. Fifteen of the inlays were cemented with RelyTMX ARC and fifteen with Compolute™ (ESPE). The specimens were kept at 370 C for 10 days before thermocycling and immersed in methylene blue 2% solution for 24 hours. The teeth were sectioned mesio-distally. The site and degree of leakage of each section was scored using a visual scoring system under a stereomicroscope at a magnification of 1.5X. Results showed that there was no significant difference in'leakage extent (p>O.05), between Rely X™ARC and Compolute™. For both materials, leakage occurred most commonly within the enamel surface and between the cement-tooth interfaces. None of the leakage occurred between inlay - cement interface. There is no significant difference in the extent of leakage between Rely XTMARC compared to Compolute™.
    Matched MeSH terms: Bicuspid
  2. Marzuki, A.F., Masudi, S.M.
    MyJurnal
    Dentin morphology and the lesion found in dental caries have been studied for many years. It was first observed under optical microscopy, and later using electron microscopy. Confocal laser scanning microscopy (CLSM) applied with several fluorescent dyes such as alizarin red to see normal dentinal tubules. However, as far as authors aware, the CLSM studies of dentinal tubules in human caries using alizarin red is rare. The aim of this study is to examine histopathological and morphological changes in dentinal tubules of dentin caries stained with alizarin red using CLSM. Fifteen extracted carious teeth (premolar or molar) was collected and fixed in neutral formalin solution buffered with phosphate buffer, rinsed and stored in calcium free phosphate buffer saline (PBS) at 4°C. The specimens were dehydrated and embedded in resin. Longitudinal or cross sections were cut and polished and then stained with alizarin red S (100 μg/ml) in 0.5 M HCl solution for 24-48 hour at 37°C. After dehydration specimens were mounted on glass slide and examined under CLSM using epi-flourescent mode or transmission light mode with wave length of 512 nm. The images of dentinal tubules were taken serially and optimum images of three-dimensional structures were reconstructed using software of CLSM. Histopathological changes of dentinal tubules in human caries showed area of demineralized dentin, translucent zone, and normal area. The dentinal tubules were thin and had numerous branches. In conclusion, confocal microscopy revealed Study shows that confocal microscopy revealed histopathological changes in dentinal tubules affected by carious lesions.
    Matched MeSH terms: Bicuspid
  3. Sulaiman E, Alarami N, Wong YI, Lee WH, Al-Haddad A
    Dent Med Probl, 2018 10 18;55(3):275-279.
    PMID: 30328305 DOI: 10.17219/dmp/94656
    BACKGROUND: There is no sufficient literature on the effect of post location on endodontically treated premolar teeth with 2 roots.

    OBJECTIVES: The aim of the study was to evaluate the effect of fiber post location on fracture resistance and failure mode of endodontically treated premolars with 2 roots.

    MATERIAL AND METHODS: Fifty extracted maxillary first premolars with 2 roots were divided randomly into 5 groups. Group 1 was comprised of sound teeth, which received only metal crowns (control). Teeth from groups 2, 3, 4, and 5 were decoronated 2 mm above the cementoenamel junction (CEJ) and were endodontically treated. No post was placed in group 2 teeth. Teeth from groups 3, 4 and 5 were given a fiber post placed in the buccal canal, palatal canal, and both buccal and palatal canals, respectively. All teeth in groups 2, 3, 4, and 5 were built up with composite and full coverage metal crowns. A compressive static load was applied at an angle of 25° to the crowns with a crosshead speed of 0.5 mm/min, until fracture.

    RESULTS: One-way analysis of variance (ANOVA) showed significant differences among the groups (p = 0.002). A post hoc test showed significantly lower fracture resistance of group 4 compared to group 5 (p = 0.011). Furthermore, group 2 had significantly less fracture resistance compared to group 1 (p = 0.021) and group 5 (p = 0.002). According to Fisher's exact test, different post locations are non-significantly associated with fracture mode (p = 0.256).

    CONCLUSIONS: Fiber post location has a significant effect on fracture resistance of severely damaged, endodontically treated maxillary premolars with 2 roots. However, post placement in the palatal root is preferred, as it maintains the restorability of the tooth.

    Matched MeSH terms: Bicuspid
  4. Chum JD, Lim DJZ, Sheriff SO, Pulikkotil SJ, Suresh A, Davamani F
    Restor Dent Endod, 2019 Feb;44(1):e8.
    PMID: 30834230 DOI: 10.5395/rde.2019.44.e8
    Objectives: Irrigants are imperative in endodontic therapy for the elimination of pathogens from the infected root canal. The present study compared the antimicrobial efficacy of octenidine dihydrochloride (OCT) with chlorhexidine (CHX) and sodium hypochlorite (NaOCl) against Staphylococcus epidermidis (S. epidermidis) for root canal disinfection.

    Materials and Methods: The minimum inhibitory concentration (MIC) was obtained using serial dilution method. The agar diffusion method was then used to determine the zones of inhibition for each irrigant. Lastly, forty 6-mm dentin blocks were prepared from human mandibular premolars and inoculated with S. epidermidis. Samples were randomly divided into 4 groups of 10 blocks and irrigated for 3 minutes with saline (control), 2% CHX, 3% NaOCl, or 0.1% OCT. Dentin samples were then collected immediately for microbial analysis, including an analysis of colony-forming units (CFUs).

    Results: The MICs of each tested irrigant were 0.05% for CHX, 0.25% for NaOCl, and 0.0125% for OCT. All tested irrigants showed concentration-dependent increase in zones of inhibition, and 3% NaOCl showed the largest zone of inhibition amongst all tested irrigants (p < 0.05). There were no significant differences among the CFU measurements of 2% CHX, 3% NaOCl, and 0.1% OCT showing complete elimination of S. epidermidis in all samples.

    Conclusions: This study showed that OCT was comparable to or even more effective than CHX and NaOCl, demonstrating antimicrobial activity at low concentrations against S. epidermidis.

    Matched MeSH terms: Bicuspid
  5. Kumar Singh A, Sulugodu Ramachandra S, Arora S, Dicksit DD, Kalyan CG, Singh P
    J Oral Biol Craniofac Res, 2017 Sep-Dec;7(3):158-160.
    PMID: 29123992 DOI: 10.1016/j.jobcr.2017.08.008
    Introduction: Oral tori and exostosis are non-pathological bony protuberances seen on the alveolar surfaces of the jaw bones. These are commonly seen on the palatal surfaces of the maxilla [torus palatinus (TP)] and around the premolars in the lingual surface of the mandible [torus mandibularis (TM)]. The aim of this cross-sectional study was to determine the prevalence of tori/exostosis in the Malaysian population.

    Methodology: A total of 2666 patients were examined for the presence of tori and exostosis in the maxilla and mandible and were categorized into TP, TM, and exostosis (facial/labial). Collected data was analysed for obtaining descriptive statistics.

    Results: 882 subjects were noticed with oral tori/exostosis among the population studied with a prevalence rate of 33%. TP was seen more in females (35%), compared to males (20%), and this difference was statistically significant (p value 
    Matched MeSH terms: Bicuspid
  6. Mustafa AA, Matinlinna JP, Razak AA, Hussin AS
    J Investig Clin Dent, 2015 Aug;6(3):161-9.
    PMID: 24415731 DOI: 10.1111/jicd.12083
    AIM: To evaluate in vitro the effect of different concentrations of 2-hydroxyethyl methacrylate (HEMA) in experimental silane-based primers on shear bond strength of orthodontic adhesives.

    METHODS: Different volume percentages of HEMA were tested in four experimental silane-based primer solutions (additions of HEMA: 0, 5.0 vol%, 25.0 vol% and 50.0 vol%). An experimental silane blend (primer) of 1.0 vol% 3-isocyanatopropyltrimethoxysilane (ICMS) + 0.5% bis-1,2-(triethoxysilyl) ethane (BTSE) was prepared and used. The experimental primers together with the control group were applied onto acid-etched premolars for attachment of orthodontic brackets. After artificial aging by thermocycling the shear-bond strength was measured. The fractured surfaces of all specimens were examined under scanning electron microscopy (SEM) to evaluate the failure mode on the enamel surface.

    RESULTS: The experimental primers showed the highest shear-bond strength of 21.15 MPa (SD ± 2.70 MPa) and with 25 vol% showed a highly significant increase (P < 0.05) in bond strength. The SEM images showed full penetration of adhesive agents when using silane-based primers. In addition, the SEM images suggested that the predominant failure type was not necessarily the same as for the failure propagation.

    CONCLUSIONS: This preliminary study suggested that nonacidic silane-based primers with HEMA addition might be an alternative to for use as adhesion promoting primers.

    Matched MeSH terms: Bicuspid/ultrastructure
  7. Mihailidis S, Scriven G, Khamis M, Townsend G
    Am. J. Phys. Anthropol., 2013 Sep;152(1):19-30.
    PMID: 23913636 DOI: 10.1002/ajpa.22323
    We present new data on the prevalence and patterning of the maxillary premolar accessory ridge (MxPAR), a common but understudied morphological dental trait that is expressed as a linear elevation extending from the buccal cusp ridge to the medial sulcus of maxillary premolar teeth. A total of 579 sets of dental casts, representing six ethnic groups, were scored using the five-grade system proposed by Burnett et al. (2010). The frequency and distribution of the MxPAR were determined by tooth type, sex, side, locus and ethnicity, and the applicability of the scoring system was assessed. The MxPAR was found in approximately two-thirds of premolar teeth, more often on second than first premolars, and more often on the distal aspect of the occlusal surface than the mesial. There was some evidence that more pronounced forms of the feature occurred more often in males than females, and that there may be some directionality in its expression between sides. Variation was also noted in the frequency of occurrence and degree of expression of the MxPAR between ethnic groups. Intra- and inter-observer concordance rates for scoring the MxPAR were low, confirming that it was difficult to score the trait identically on two different occasions. Our findings have clarified the distribution of the MxPAR within the dentition and between ethnic groups, and highlighted the need for researchers to carry out thorough replicability studies and to decide on an appropriate breakpoint for determining presence or absence of this feature before embarking on genetic studies or bio-distance analyses.
    Matched MeSH terms: Bicuspid/anatomy & histology*
  8. Purmal K, Alam MK, Moganadass DD, Zakariat NN, Cheong NW
    Aust Orthod J, 2013 May;29(1):34-42.
    PMID: 23785936
    To assess the applicability of Pont's Index in a Malaysian population by obtaining baseline measurements of dental arch shape based on premolar arch width, molar arch width and the combined width of the maxillary incisors. A secondary aim was to determine whether a correlation exists between arch widths, Pont's Index and the facial framework.
    Matched MeSH terms: Bicuspid/anatomy & histology
  9. Al-Khatib AR, Rajion ZA, Masudi SM, Hassan R, Anderson PJ, Townsend GC
    Orthod Craniofac Res, 2011 Nov;14(4):243-53.
    PMID: 22008304 DOI: 10.1111/j.1601-6343.2011.01529.x
    To investigate tooth size and dental arch dimensions in Malays using a stereophotogrammetric system.
    Matched MeSH terms: Bicuspid/anatomy & histology
  10. Wahab RM, Idris H, Yacob H, Ariffin SH
    Eur J Orthod, 2012 Apr;34(2):176-81.
    PMID: 21478298 DOI: 10.1093/ejo/cjq179
    This prospective study investigated the difference in clinical efficiency between Damon™ 3 self-ligating brackets (SLB) compared with Mini Diamond conventional ligating brackets (CLBs) during tooth alignment in straightwire fixed appliance therapy. Twenty-nine patients (10 males and 19 females), aged between 14 and 30 years, were randomly divided into two groups: 14 patients received the SLB and 15 received the CLB. Upper arch impressions were taken for pre-treatment records (T(0)). A transpalatal arch was soldered to both maxillary first molar bands prior to extraction of the maxillary first premolars, followed by straightwire fixed appliances (0.022 × 0.028 inch). A 0.014 inch nickel titanium (NiTi) wire was used as the levelling and aligning archwire. Four monthly reviews were undertaken and impressions of the upper arch were taken at each appointment (T(1), T(2), T(3), and T(4)). Displacements of the teeth were determined using Little's irregularity index (LII). Data were analysed using the Mann-Whitney U-test. In the aligning stage, the CLB group showed significantly faster alignment of the teeth compared with the SLB group at the T(1)-T(2) interval (P < 0.05). However, there were no differences at T(2)-T(3), and T(3)-T(4) for either group (P > 0.05). The CLB group showed 98 per cent crowding alleviation compared with 67 per cent for the SLB after 4 months of alignment and levelling. Mini Diamond brackets aligned the teeth faster than Damon™ 3 but only during the first month. There was no difference in efficacy between the two groups in the later 3 weeks. Alleviation of crowding was faster with CLB than with SLB.
    Matched MeSH terms: Bicuspid/surgery
  11. Seow LL, Toh CG, Wilson NH
    Eur J Prosthodont Restor Dent, 2005 Jun;13(2):57-64.
    PMID: 16011232
    Existing literature suggests a relationship between the amount of remaining tooth structure and the fracture resistance of the restored endodontically treated tooth. This study investigated the amount of tooth structure remaining following various tooth preparations used in the restoration of the endodontically treated maxillary second premolar. Illustrations of the maxillary second premolar in buccopalatal, mesiodistal and occlusal sections were drawn to scale. Outlines of various intra- and extracoronal preparations were superim-posed on the illustrations to reveal the amount of tooth tissue remaining in each case. Preparations for a ceramic inlay, inlay with palatal cusp coverage and onlay left 2.0-2.5mm of tooth structure buccally and palatally. Following preparation for a metal-ceramic crown, approximately 1.0mm of tooth structure remained buccally, and between 1.6mm-1.8mm palatally. Preparation for an all-ceramic crown was observed to leave 1.0mm-1.2mm of tooth structure surrounding what remained of the endodontic access cavity. It was concluded that decisions as to the type of definitive restoration to restore the endodontically treated maxillary second premolar may be influenced, amongst other factors, by information on the amount of tooth tissue remaining following preparation.
    Matched MeSH terms: Bicuspid/pathology*
  12. Jan J, Wan Bakar WZ, Mathews SM, Okoye LO, Ehler BR, Louden C, et al.
    J Investig Clin Dent, 2016 Nov;7(4):383-390.
    PMID: 26012784 DOI: 10.1111/jicd.12163
    OBJECTIVE: This study investigated the accuracy of the Canary System (CS) to detect proximal caries lesions in vitro, and compared it with conventional methods: International Caries Detection and Assessment System (ICDAS) II and bitewing radiography (BW).

    METHODS: Visible proximal surfaces of extracted human teeth were assessed by ICDAS-II before setting them in five manikin mouth models. Then contacting proximal surfaces in mouth models were assessed by BW and CS. Histological validation with polarized-light microscopy served as a gold standard. Pairwise comparisons were performed on area under the curve (AUC), sensitivity, and specificity of the three methods, and corrected using Bonferroni's method. Sensitivities and specificities were compared using a test of proportions and AUC values were compared using DeLong's method.

    RESULTS: The CS presented significantly higher sensitivity (0.933) than ICDAS-II (0.733, P = 0.01) and BW (0.267, P 

    Matched MeSH terms: Bicuspid/pathology
  13. Wey MC, Shim CN, Lee MY, Jamaluddin M, Ngeow WC
    Aust Orthod J, 2012 May;28(1):17-21.
    PMID: 22866589
    This study aimed to establish a safety zone for the placement of mini-implants in the buccal surface between the second maxillary premolar (PM2) and first maxillary molar (M1) of Mongoloids.
    Matched MeSH terms: Bicuspid
  14. Baig MR, Tan KB, Nicholls JI
    J Prosthet Dent, 2010 Oct;104(4):216-27.
    PMID: 20875526 DOI: 10.1016/S0022-3913(10)60128-X
    The marginal fit of crowns is a concern for clinicians, and there is no conclusive evidence of any one margin configuration yielding better results than others in terms of marginal fit.
    Matched MeSH terms: Bicuspid
  15. Al-Makramani BM, Razak AA, Abu-Hassan MI
    J Contemp Dent Pract, 2008;9(2):33-40.
    PMID: 18264523
    The objective of this study is to investigate the effect of different luting agents on the fracture strength of Turkom-Cera all-ceramic copings.
    Matched MeSH terms: Bicuspid
  16. Seow LL, Toh CG, Fok AS, Wilson NH
    Am J Dent, 2008 Oct;21(5):331-6.
    PMID: 19024261
    PURPOSE: To investigate the level and distribution of stresses in endodontically treated maxillary premolar teeth restored using various cavity designs of bonded all-ceramic restorations. The hypothesis tested was that the various all-ceramic approaches, including incorporating a pulp chamber extension in the restoration, had no influence on the stresses in the restored tooth unit.
    METHODS: Finite element packages Patran and Abaqus were used for the stress analysis. The cavity designs investigated include: (1) inlay (I); (2) inlay with palatal cusp coverage (IPC); (3) onlay (O); (4) inlay with pulp chamber extension (IPE); (5) inlay with palatal cusp coverage and pulp chamber extension (IPCPE); and (6) onlay with pulp chamber extension (OPE).
    RESULTS: In each case, tensile stresses were found to be concentrated subjacent to the occlusal fossa. Peak tensile stress and peak shear stress values along the tooth/restoration interface for IPC, O IPCPE and OPE cavity designs were found to be associated with the axiogingival line angle. Overall, the order of the various forms of restoration investigated in terms of the maximum principal stress (from greatest to lowest) was as follows: IPE > IPCPE > OPE > I > IPC > O.
    Matched MeSH terms: Bicuspid
  17. Ng KH, Siar CH
    PMID: 12738952
    Although rare, hard tissue deposits, namely dystrophic calcifications and cartilage, have been reported to occur in the connective tissue wall of the odontogenic keratocyst. However, dentinoid formation has not been previously documented. A case involving the left mandibular premolar-molar region in a 37-year-old Malay male is described here along with a brief review on the reported prevalence of hard tissue deposits in the odontogenic keratocyst. Differential diagnosis of this case from other dentinoid-forming odontogenic cysts and tumors-notably calcifying odontogenic cyst, odontoma, ameloblastic fibro-odontoma, central odontogenic fibroma and adenomatoid odontogenic tumor that may present with dentin/dentinoid formation-is discussed.
    Matched MeSH terms: Bicuspid
  18. Ong TK
    Eur Endod J, 2017;2(1):1-6.
    PMID: 33403352 DOI: 10.14744/eej.2017.17035
    Objective: The purpose of this article was to report the finding of the disappearance of intracanal medication as a supporting evidence of vertical root fracture (VRF) through non-surgical intervention.

    Methods: A retrospective review of the dental records of patients seen by an endodontist in a private endodontic office from September 2013 to September 2016 was conducted by the same endodontist. Cases that met the inclusion and exclusion criteria were assigned as the subjects of this study, and data were extracted from their clinical and radiographic records. Patient's demographic features, pre-operative signs and symptoms, details of rendered clinical procedures, follow-up visits, clinical and radiographic findings were recorded. Seventeen teeth for which non-surgical exploratory re-treatment was initiated were included in this study. Calcium hydroxide-based intracanal medication was placed for 2-4 weeks. Obturation of the root canals was performed if the tooth showed improvement of clinical signs and symptoms. If not, a cone-beam computed tomography (CBCT) scan was proposed to the patient to rule out VRF.

    Results: After the non-surgical re-treatment was initiated, 13 teeth showed improvement of clinical symptoms and the re-treatment was therefore completed. The remaining 4 teeth presented with unresolved clinical presentations (deep pocket, presence of sinus tract and/or tender to percussion and palpation). Four teeth showed partial disappearance of intracanal medication where VRF was confirmed using CBCT in 3 teeth and with a conventional periapical (PA) radiograph in 1 tooth.

    Conclusion: The disappearance of intracanal medication during non-surgical intervention was often associated with VRF. Thus, this feature may serve as an aid in diagnosing VRF.

    Matched MeSH terms: Bicuspid
  19. Thomas LA, Thomas LR, Balla SB, Gopalaiah H, Kanaparthi A, Sai Sravanthi G, et al.
    Leg Med (Tokyo), 2021 Feb;48:101814.
    PMID: 33246253 DOI: 10.1016/j.legalmed.2020.101814
    In the context of dental age assessment, two significant factors can be studied; tooth mineralisation and tooth emergence. Little is known about the role of a second molar eruption in forensic age estimation. This paper aims to contribute to forensic age estimation using an age threshold of 14 years, studying the eruption stages of permanent mandibular premolars and second molars. Totally 640 orthopantomograms (OPGs) of south Indian children, aged between 10 and 18 years, were evaluated using Olze et al. staging of tooth eruption stages (A-D). Spearman's rho correlation showed a strong, positive, and statistically significant correlation between the chronological age and the eruption stages of both sexes' teeth. Accuracy, sensitivity, specificity, likelihood ratios, and post-test probability values were calculated for all tested teeth. The best performance to discriminate individuals above or below 14 years showed stage D in second molars. The sensitivity varied between 89% and 94% and specificity between 75% and 84%, respectively. Receiver operating characteristic curve analysis revealed high diagnostic performance for stage D, with area under the ROC curve (AUC) values of 84% and 85% for tooth 37 and 85% and 83% for tooth 47 in males and females, respectively. In conclusion, it is possible to predict age over 14 years in south Indian children using tooth emergence stages from OPGs with a relatively high interobserver agreement and good diagnostic accuracy. However, there are some limitations and, therefore, must be used in conjunction with other methods.
    Matched MeSH terms: Bicuspid
  20. Che Ab Aziz, Z.A.
    Ann Dent, 2008;15(2):67-70.
    MyJurnal
    Aim: To manufacture a clinical simulation apparatus for the undergraduates' endodontic radiography teaching Objectives: • To provide a model for teaching of parallax method using Kelly's forcep • To provide a model for undergraduates to practice radiographic localization employing parallax method. • To allow students to practice taking radiographs in a way that simulates the clinical situations with a good diagnostic quality Methods: Impressions of a dentate arch (maxillary and mandibullary) were used to form a stone cast. A section of the cast, in the area where the natural teeth were to be placed, is sectioned and removed. Three maxillary extracted teeth (canine, first and second premolar) were selected and mounted with acrylic resin at the sectioned area. The resin was cured in a light box. The arches were mounted in a phantom head with a placement of rubber cheek. The first premolar was isolated with rubber dam. The intraoral holder (Kelly's forcep) was attached to a robotic arm. The students were taught the correct angulations of the x-ray cone for the paralleling technique and parallax method using Kelly's forcep during root canal treatment. Results: All students managed to complete the exercise and were considered competent when they produced acceptable quality of radiographs. Conclusion: The model described was improvised from a model that has been used during the past 2 years for undergraduates' endodontic courses. It has been well accepted as it simulates the clinical situation more closely than was possible previously.
    Matched MeSH terms: Bicuspid
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links