Displaying publications 61 - 80 of 890 in total

Abstract:
Sort:
  1. Maznah Z, Halimah M, Ismail BS
    Bull Environ Contam Toxicol, 2018 May;100(5):677-682.
    PMID: 29516138 DOI: 10.1007/s00128-018-2312-x
    The residual levels and persistence of thiram in the soil, water and oil palm seedling leaves were investigated under field conditions. The experimental plots were carried out on a clay loam soil and applied with three treatments namely; manufacturer's recommended dosage (25.6 g a.i. plot-1), manufacturer's double recommended dosage (51.2 g a.i. plot-1), and control (water) were applied. Thiram residues were detected in the soil from day 0 to day 3 in the range of 0.22-27.04 mg kg-1. Low concentrations of thiram were observed in the water and leave samples in the range of 0.27-2.52 mg L-1 and 1.34-12.28 mg kg-1, respectively. Results have shown that thiram has a rapid degradation and has less persistence due to climatic factors. These findings suggest that thiram is safe when applied at manufacturer's recommended dosage on oil palm seedlings due to low residual levels observed in soil and water bodies.
    Matched MeSH terms: Environmental Monitoring
  2. Zhao X, Kim SK, Zhu W, Kannan N, Li D
    Chemosphere, 2015 Jan;119:289-294.
    PMID: 25036943 DOI: 10.1016/j.chemosphere.2014.06.005
    The Changbai (also known as "Baekdu") Mountain, on the border between China and North Korea, is the highest mountain (2750 m) in northeastern China. Recently, this mountain region has experienced a dramatic increase in air pollution, not only because of increasing volumes of tourism-derived traffic but also because of the long-range transport of polluted westerly winds passing through major industrial and urban cities in the eastern region of China. To assess the relative importance of the two sources of pollution, 16 polycyclic aromatic hydrocarbons (PAHs) as model substances were determined in the mountain soil. A total of 32 soil samples were collected from different sides of the mountain at different latitudes between July and August of 2009. The ∑PAH concentrations were within the range 38.5-190.1 ng g(-1) on the northern side, 117.7-443.6 ng g(-1) on the southern side, and 75.3-437.3 ng g(-1) on the western side. A progressive increase in the level of ∑PAHs with latitude was observed on the southern and western sides that face the westerly wind with abundant precipitation. However, a similar concentration gradient was not observed on the northern side that receives less rain and is on the leeward direction of the wind. The high-molecular-weight PAH compounds were predominant in the soils on the southern and western sides, while low-molecular-weight PAHs dominated the northern side soils. These findings show that the distribution of PAHs in the mountain soil is strongly influenced by the atmospheric long-range transport and cold trapping.
    Matched MeSH terms: Environmental Monitoring
  3. Santhi VA, Hairin T, Mustafa AM
    Chemosphere, 2012 Mar;86(10):1066-71.
    PMID: 22197311 DOI: 10.1016/j.chemosphere.2011.11.063
    A study to assess the level of organochlorine pesticides (OCPs) and bisphenol A (BPA) in edible marine biota collected from coastal waters of Malaysia was conducted using GC-MS and SPE extraction. An analytical method was developed and validated to measure the level of 15 OCPs and BPA simultaneously from five selected marine species. It was observed that some samples had low levels of p,p'-DDE, p,p'-DDT and p,p'- DDD ranging from 0.50 ng g(-1) to 22.49 ng g(-1) dry weight (d.w) but significantly elevated level of endosulfan I was detected in a stingray sample at 2880 ng g(-1) d.w. BPA was detected in 31 out of 57 samples with concentration ranging from below quantification level (LOQ: 3 ng g(-1)) to 729 ng g(-1) d.w. The presence of OCPs is most likely from past use although there is also indication of illegal use in recent times. The study also reveals that BPA is more widely distributed in coastal species caught off the coast of the most developed state. The potential health risk from dietary intakes of OCPs and BPA from the analysed fish species was negligible.
    Matched MeSH terms: Environmental Monitoring
  4. Duong CN, Ra JS, Cho J, Kim SD, Choi HK, Park JH, et al.
    Chemosphere, 2010 Jan;78(3):286-93.
    PMID: 19931116 DOI: 10.1016/j.chemosphere.2009.10.048
    The effects of treatment processes on estrogenicity were evaluated by examining estradiol equivalent (EEQ) concentrations in influents and effluents of sewage treatment plants (STPs) located along Yeongsan and Seomjin rivers in Korea. The occurrence and distribution of estrogenic chemicals were also estimated for surface water in Korea and compared with seven other Asian countries including Laos, Cambodia, Vietnam, China, Indonesia, Thailand and Malaysia. Target compounds were nonylphenol (NP), octylphenol (OP), bisphenol A (BPA), estrone (E1), 17beta-estradiol (E2), 17alpha-ethynylestradiol (EE2) and genistein (Gen). Water samples were pretreated and analyzed by liquid-liquid extraction (LLE) and gas chromatography/mass spectrometry (GC/MS). The results showed that the treatment processes of Korean STPs were sufficient to reduce the estrogenic activity of municipal wastewater. The concentrations of phenolic xenoestrogens (i.e., NP, OP and BPA) in samples of Yeongsan and Seomjin rivers were smaller than those reported by previous studies in Korea. In most samples taken from the seven Asian countries, the presence of E2 and EE2 was a major contributor toward estrogenic activity. The EEQ concentrations in surface water samples of the seven Asian countries were at a higher level in comparison to that reported in European countries, America and Japan. However, further studies with more sampling frequencies and sampling areas should be carried out for better evaluation of the occurrence and distribution of estrogenic compounds in these Asian countries.
    Matched MeSH terms: Environmental Monitoring
  5. Shuhaimi-Othman M, Nadzifah Y, Nur-Amalina R, Umirah NS
    Chemosphere, 2013 Mar;90(11):2631-6.
    PMID: 23246727 DOI: 10.1016/j.chemosphere.2012.11.030
    Freshwater quality criteria for copper (Cu), cadmium (Cd), aluminum (Al), and manganese (Mn) were developed with particular reference to aquatic biota in Malaysia, and based on USEPA's guidelines. Acute toxicity tests were performed on eight different freshwater domestic species in Malaysia, which were Macrobrachiumlanchesteri (prawn), two fish -Poeciliareticulata and Rasborasumatrana, Melanoidestuberculata (snail), Stenocyprismajor (ostracod), Chironomusjavanus (midge larvae), Naiselinguis (annelid), and Duttaphrynusmelanostictus (tadpole), to determine 96-h LC50 values for Cu, Cd, Al, and Mn. The final acute values (FAVs) for Cu, Cd, Al, and Mn were 2.5, 3.0, 977.8, and 78.3 μgL(-1), respectively. Using an estimated acute-to-chronic ratio (ACR) of 8.3, the value for final chronic value (FCV) was derived. Based on FAV and FCV, a Criterion Maximum Concentration (CMC) and a criterion Continuous Concentration (CCC) for Cu, Cd, Al, and Mn of 1.3, 1.5, 488.9, and 39.1 μgL(-1) and 0.3, 0.36, 117.8, and 9.4 μgL(-1), respectively, were derived. The results of this study provide useful data for deriving national or local water quality criteria for Cu, Cd, Al, and Mn based on aquatic biota in Malaysia. Based on LC50 values, this study indicated that R.sumatrana, M.lanchesteri, C.javanus, and N.elinguis were the most sensitive to Cu, Cd, Al, and Mn, respectively.
    Matched MeSH terms: Environmental Monitoring/methods
  6. Eguchi A, Isobe T, Ramu K, Tue NM, Sudaryanto A, Devanathan G, et al.
    Chemosphere, 2013 Mar;90(9):2365-71.
    PMID: 23149186 DOI: 10.1016/j.chemosphere.2012.10.027
    In Asian developing countries, large amounts of municipal wastes are dumped into open dumping sites each day without adequate management. This practice may cause several adverse environmental consequences and increase health risks to local communities. These dumping sites are contaminated with many chemicals including brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs). BFRs may be released into the environment through production processes and through the disposal of plastics and electronic wastes that contain them. The purpose of this study was to elucidate the status of BFR pollution in municipal waste dumping sites in Asian developing countries. Soil samples were collected from six open waste dumping sites and five reference sites in Cambodia, India, Indonesia, Malaysia, and Vietnam from 1999 to 2007. The results suggest that PBDEs are the dominant contaminants in the dumping sites in Asian developing countries, whereas HBCD contamination remains low. Concentrations of PBDEs and HBCDs ranged from ND to 180 μg/kg dry wt and ND to 1.4 μg/kg dry wt, respectively, in the reference sites and from 0.20 to 430 μg/kg dry wt and ND to 2.5 μg/kg dry wt, respectively, in the dumping sites. Contamination levels of PBDEs in Asian municipal dumping sites were comparable with those reported from electronic waste dismantling areas in Pearl River delta, China.
    Matched MeSH terms: Environmental Monitoring
  7. Wee SY, Aris AZ, Yusoff FM, Praveena SM
    Chemosphere, 2021 Feb;264(Pt 1):128488.
    PMID: 33045559 DOI: 10.1016/j.chemosphere.2020.128488
    Contamination of endocrine disrupting compounds (EDCs) in tap water is an emerging global issue, and there are abundant influencing factors that have an ambivalent effect on their transportation and fate. Different housing types vary in terms of water distribution system operation and design, water consumption choices, and other hydraulic factors, which potentially affect the dynamics, loadings, and partitioning of pollutants in tap water. Thus, this study analyzed 18 multiclass EDCs in tap water from different housing types (i.e., landed and high-rise) and the associated health risks. Sample analyses revealed the presence of 16 EDCs, namely hormones (5), pharmaceuticals (8), a pesticide (1), and plasticizers (2) in tap water, with the prevalent occurrence of bisphenol A up to 66.40 ng/L in high-rise housing. The presence of caffeine and sulfamethoxazole distribution in tap water was significantly different between landed and high-rise housings (t(152) = -2.298, p = 0.023 and t(109) = 2.135, p = 0.035). Moreover, the salinity and conductivity of tap water in high-rise housings were significantly higher compared to those in landed housings (t(122) = 2.411, p = 0.017 and t(94) = 2.997, p = 0.003, respectively). Furthermore, there were no potential health risks of EDCs (risk quotient 
    Matched MeSH terms: Environmental Monitoring
  8. Prabakaran K, Nagarajan R, Eswaramoorthi S, Anandkumar A, Franco FM
    Chemosphere, 2019 Mar;219:933-953.
    PMID: 30572242 DOI: 10.1016/j.chemosphere.2018.11.158
    The geochemistry and distribution of major, trace and rare earth elements (REE's) was studied in the surface sediments of the Lower Baram River during two seasons: the Monsoon (MON) and Post - monsoon (POM). The major geochemical processes controlling the distribution and mobility of major, trace and REE's in the Lower Baram River surface sediments was revealed through factor analysis. The risk assessment of major and trace element levels was studied at three specific levels; i.e. the enrichment level [Contamination Factor (Cf), with the geo-accumulation index (Igeo)], the availability level [metals bound to different fractions, risk assessment code (RAC)], and the biological toxicity level [effect range low (ERL) and effect range medium (ERM)]. The results of all the indices indicate that Cu is the element of concern in the Lower Baram River sediments. The geochemical fractionation of major and trace elements were studied through sequential extraction and the results indicated a higher concentration of Mn in the exchangeable fraction. The element of concern, Cu, was found to be highly associated in the organic bound (F4) fraction during both seasons and a change in the redox, possibly due to storms or dredging activities may stimulate the release of Cu into the overlying waters of the Lower Baram River.
    Matched MeSH terms: Environmental Monitoring/methods*
  9. Latif MT, Abd Hamid HH, Ahamad F, Khan MF, Mohd Nadzir MS, Othman M, et al.
    Chemosphere, 2019 Dec;237:124451.
    PMID: 31394440 DOI: 10.1016/j.chemosphere.2019.124451
    This study aims to determine the composition of BTEX (benzene, toluene, ethylbenzene and xylene) and assess the risk to health at different sites in Malaysia. Continuous monitoring of BTEX in Kuala Lumpur City Centre, Kuala Terengganu, Kota Kinabalu and Fraser Hill were conducted using Online Gas Chromatograph. For comparison, BTEX at selected hotspot locations were determined by active sampling method using sorbent tubes and Thermal Desorption Gas Chromatography Mass Spectrometry. The hazard quotient (HQ) for non-carcinogenic and the life-time cancer risk (LTCR) of BTEX were calculated using the United States Environmental Protection Agency (USEPA) health risk assessment (HRA) methods. The results showed that the highest total BTEX concentrations using continuous monitoring were recorded in the Kuala Lumpur City Centre (49.56 ± 23.71 μg/m3). Toluene was the most dominant among the BTEX compounds. The average concentrations of benzene ranged from 0.69 ± 0.45 μg/m3 to 6.20 ± 3.51 μg/m3. Measurements using active sampling showed that BTEX concentrations dominated at the roadside (193.11 ± 114.57 μg/m3) in comparison to petrol station (73.08 ± 30.41 μg/m3), petrochemical industry (32.10 ± 13.13 μg/m3) and airport (25.30 ± 6.17 μg/m3). Strong correlations among BTEX compounds (p<0.01, r>0.7) at Kuala Lumpur City Centre showed that BTEX compounds originated from similar sources. The values of HQ at all stations were <1 indicating the non-carcinogenic risk are negligible and do not pose threats to human health. The LTCR value based on benzene inhalation (1.59 × 10-5) at Kuala Lumpur City Centre were between 1 × 10-4 and 1 × 10-5, representing a probable carcinogenic risk.
    Matched MeSH terms: Environmental Monitoring/methods*
  10. Li X, Hussain SA, Sobri S, Md Said MS
    Chemosphere, 2021 May;271:129502.
    PMID: 33465622 DOI: 10.1016/j.chemosphere.2020.129502
    Most developing countries in the world face the common challenges of reducing air pollution and advancing the process of sustainable development, especially in China. Air pollution research is a complex system and one of the main methods is through numerical simulation. The air quality model is an important technical method, it allows researchers to better analyze air pollutants in different regions. In addition, the SCB is a high-humidity and foggy area, and the concentration of atmospheric pollutants is always high. However, research on this region, one of the four most polluted regions in China, is still lacking. Reviewing the application of air quality models in the SCB air pollution has not been reported thoroughly. To fill these gaps, this review provides a comprehensive narration about i) The status of air pollution in SCB; ii) The application of air quality models in SCB; iii) The problems and application prospects of air quality models in the research of air pollution. This paper may provide a theoretical reference for the prevention and control of air pollution in the SCB and other heavily polluted areas in China and give some1inspirations for air pollution forecast in other countries with complex terrain.
    Matched MeSH terms: Environmental Monitoring
  11. Singh N, Banerjee T, Murari V, Deboudt K, Khan MF, Singh RS, et al.
    Chemosphere, 2021 Jan;263:128030.
    PMID: 33297051 DOI: 10.1016/j.chemosphere.2020.128030
    Size-segregated airborne fine (PM2.1) and coarse (PM>2.1) particulates were measured in an urban environment over central Indo-Gangetic plain in between 2015 and 2018 to get insights into its nature, chemistry and sources. Mean (±1σ) concentration of PM2.1 was 98 (±76) μgm-3 with a seasonal high during winter (DJF, 162 ± 71 μgm-3) compared to pre-monsoon specific high in PM>2.1 (MAMJ, 177 ± 84 μgm-3) with an annual mean of 170 (±69) μgm-3. PM2.1 was secondary in nature with abundant secondary inorganic aerosols (20% of particulate mass) and water-soluble organic carbon (19%) against metal enriched (25%) PM>2.1, having robust signature of resuspensions from Earth's crust and road dust. Ammonium-based neutralization of particulate acidity was essentially in PM2.1 with an indication of predominant H2SO4 neutralization in bisulfate form compared to Ca2+ and Mg2+-based neutralization in PM>2.1. Molecular distribution of n-alkanes homologues (C17-C35) showed Cmax at C23 (PM2.1) and C18 (PM>2.1) with weak dominance of odd-numbered n-alkanes. Carbon preference index of n-alkanes was close to unity (PM2.1: 1.4 ± 0.3; PM>2.1: 1.3 ± 0.4). Fatty acids (C12-C26) were characterized with predominance of even carbon with Cmax at n-hexadecanoic acid (C16:0). Low to high molecular weight fatty acid ratio ranged from 2.0 (PM>2.1) to 5.6 (PM2.1) with vital signature of anthropogenic emissions. Levoglucosan was abundant in PM2.1 (758 ± 481 ngm-3) with a high ratio (11.6) against galactosan, emphasizing robust contribution from burning of hardwood and agricultural residues. Receptor model resolves secondary aerosols and biomass burning emissions (45%) as the most influential sources of PM2.1 whereas, crustal (29%) and secondary aerosols (29%) were found responsible for PM>2.1; with significant variations among the seasons.
    Matched MeSH terms: Environmental Monitoring
  12. Jaafar N, Musa SM, Azfaralariff A, Mohamed M, Yusoff AH, Lazim AM
    Chemosphere, 2020 Dec;260:127649.
    PMID: 32688323 DOI: 10.1016/j.chemosphere.2020.127649
    Post-digestion treatment is an important step during sample preparation to facilitate the removal of undigested materials for better detection of ingested microplastics. Sieving, density separation with zinc chloride solution (ZnCl2), and oil extraction protocol (OEP) have been introduced in separating microplastics from sediments. The clean-up methods are rarely highlighted in previous studies, especially in the separation of microplastics from marine biota. Thus, this study proposed and compared the suitability of three techniques, which can reduce the number of undigested particles from the digestate of GIT and gills. Our result has shown excellent removal of non-plastics materials and reduces the coloration of filter paper in all treated samples. Both sieving and density separation achieved optimum post-digestion efficiencies of >95% for both GIT and gill samples, which former showed no effect on polymer integrity. Additionally, high recovery rate was obtained for the larger size microplastics (>500 μm) with approximately 97.7% (GIT) and 95.7% (gill), respectively. Exposure to the ZnCl2 solution led to a significant loss of smaller size PET and changed the absorption spectrums of all tested polymers. Particle morphology determined by SEM revealed such exposure eroded the surface of PET fragments and elemental analysis has shown detectable peaks of zinc and chlorine appeared. Low microplastics recoveries were achieved through OPE and residue of oil was observed from the infrared spectrum of all tested polymer. The findings demonstrate sieving with size fractioning can provide exceptional removal of non-plastics materials from the digestate of GIT and gill samples.
    Matched MeSH terms: Environmental Monitoring/methods
  13. Othman M, Latif MT, Jamhari AA, Abd Hamid HH, Uning R, Khan MF, et al.
    Chemosphere, 2021 Jan;262:127767.
    PMID: 32763576 DOI: 10.1016/j.chemosphere.2020.127767
    This study aimed to determine the spatial distribution of PM2.5 and PM10 collected in four regions (North, Central, South and East Coast) of Peninsular Malaysia during the southwest monsoon. Concurrent measurements of PM2.5 and PM10 were performed using a high volume sampler (HVS) for 24 h (August to September 2018) collecting a total of 104 samples. All samples were then analysed for water soluble inorganic ions (WSII) using ion chromatography, trace metals using inductively coupled plasma-mass spectroscopy (ICP-MS) and polycyclic aromatic hydrocarbon (PAHs) using gas chromatography-mass spectroscopy (GC-MS). The results showed that the highest average PM2.5 concentration during the sampling campaign was in the North region (33.2 ± 5.3 μg m-3) while for PM10 the highest was in the Central region (38.6 ± 7.70 μg m-3). WSII recorded contributions of 22% for PM2.5 and 20% for PM10 mass, with SO42- the most abundant species with average concentrations of 1.83 ± 0.42 μg m-3 (PM2.5) and 2.19 ± 0.27 μg m-3 (PM10). Using a Positive Matrix Factorization (PMF) model, soil fertilizer (23%) was identified as the major source of PM2.5 while industrial activity (25%) was identified as the major source of PM10. Overall, the studied metals had hazard quotients (HQ) value of <1 indicating a very low risk of non-carcinogenic elements while the highest excess lifetime cancer risk (ELCR) was recorded for Cr VI in the South region with values of 8.4E-06 (PM2.5) and 6.6E-05 (PM10). The incremental lifetime cancer risk (ILCR) calculated from the PAH concentrations was within the acceptable range for all regions.
    Matched MeSH terms: Environmental Monitoring/methods*
  14. Hussein M, Yoneda K, Mohd-Zaki Z, Amir A, Othman N
    Chemosphere, 2021 Mar;267:128874.
    PMID: 33199110 DOI: 10.1016/j.chemosphere.2020.128874
    Landfills are a potential threat to human health and the environment, especially from the detrimental and toxic heavy metals. This study focuses on the assessment of heavy metals contamination in leachate and surface soils from different landfills in Malaysia. Maximum quality rating scale (QRS) values of As (787) and Cr (552) denotes progressive deterioration of leachate contamination in landfill. The impacted soils showed high heavy metal concentrations especially at non-sanitary unlined landfills, as compared to background values, and natural soil nearby the landfills. In addition, to examine the environmental impacts of the landfill area (soil) in more detail, specific indexes; geo-accumulation index (Igeo), pollution index (PI) and integrated pollution index (IPI) were determined. Maximum As (3.122) and Cd (2.633) for Igeo and As (34.037) and Cd (20.881) for PI revealed that the soil samples in non-sanitary landfills were moderate to strongly polluted. The difference in range of IPI values for sanitary (0.294-0.322) and non-sanitary landfill soils (1.263-1.956) confirmed advanced decline of the soil quality in non-sanitary landfills. Arsenic concentrations were found to be statistically significant (ANOVA) for leachate and impacted soil in landfills investigated. It is also important to realize that rise in metal contents in landfill environments were not only caused by anthropogenic sources such as from the waste disposed, but also some other factors such as redox conditions, anoxic environments, pH, oxidation state of metals and microbial activities. Those conditions will actively promotes leaching of metals from waste and also natural soils in the landfill.
    Matched MeSH terms: Environmental Monitoring
  15. Andreas, Hadibarata T, Sathishkumar P, Prasetia H, Hikmat, Pusfitasari ED, et al.
    Chemosphere, 2021 Aug;276:130185.
    PMID: 33743420 DOI: 10.1016/j.chemosphere.2021.130185
    Indonesia is the second-largest contributor of microplastics (MPs) pollution in the marine ecosystem. Most MPs pollution-related studies in Indonesia focus on seawater, sediment, with less information found on the commercially important fish species used for human consumption. Skipjack Tuna (Euthynnus affinis) is one of the major exporting fishery commodities from Indonesia. This exploratory study aimed to determine MPs presence in the digestive tract of Skipjack Tuna from the Southern Coast of Java, Indonesia. The fish samples were collected from five different fish traditional auction market along the Southern Coast of Java, Indonesia, namely Pangandaran, Pamayang Sari, Ciletuh, Santolo, and Palabuhan Ratu. The gastrointestinal tract of Skipjack tuna was pretreated using alkaline destruction and filtered. The presence of MPs in the treated samples was visually identified using an optical microscope, while Polybrominated diphenyl ethers (PBDEs) contaminants were analyzed using Gas Chromatography-Mass Spectrometry (GC-MS). A total of 19 suspected MPs particles were found in the form of filament (84%), angular (11%), and round (5%). This result would provide a better indication of the MPs contamination in marine life species in the Southern Coast of Java, Indonesia, as useful information for marine environmental monitoring program in the future.
    Matched MeSH terms: Environmental Monitoring
  16. Vaezzadeh V, Thomes MW, Kunisue T, Tue NM, Zhang G, Zakaria MP, et al.
    Chemosphere, 2021 Jan;263:128272.
    PMID: 33297216 DOI: 10.1016/j.chemosphere.2020.128272
    Barnacles are ubiquitous in coastal ecosystems of different geographical regions worldwide. This is the first study attempting to assess the suitability of barnacles as bioindicators of persistent organic pollutants (POPs) in coastal environments. Barnacles were collected from the coasts around Peninsular Malaysia and analyzed for POPs including polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorine pesticides (OCPs). Among POPs, PCBs showed the highest concentrations with elevated contributions of CB28 and CB153. As for PBDEs, BDE47 was the most frequently detected congener, while BDE209 was detected in barnacles from two stations in Port Klang and the levels reached up to >70% of total PBDE concentrations. Concentrations of OCPs detected in barnacles were in the order of CHLs > DDTs > HCHs > HCB and 4,4'-DDE and cis- and trans-chlordane were the predominant OCP compounds. A comparison with previous studies in Malaysia showed consistent levels of POPs. Green mussels collected from selected barnacles' habitats, for the sake of a comparison, showed almost similar profiles but lower concentrations of POPs. The spatial distribution of POPs observed in barnacles and comparison of POP levels and profiles with mussels indicated that barnacles can be useful bioindicators for monitoring POPs contamination in the coastal ecosystems.
    Matched MeSH terms: Environmental Monitoring
  17. Pramanik BK, Pramanik SK, Monira S
    Chemosphere, 2021 Nov;282:131053.
    PMID: 34098311 DOI: 10.1016/j.chemosphere.2021.131053
    Nano/microplastics (NPs/MPs), a tiny particle of plastic pollution, are known as one of the most important environmental threats to marine ecosystems. Wastewater treatment plants can act as entrance routes for NPs/MPs to the aquatic environment as they breakdown of larger fragments of the plastic component during the treatment process; therefore, it is necessary to remove NPs/MPs during the wastewater treatment process. In this study, understanding the effect of water shear force on the fragmentation of larger size MPs into smaller MPs and NPs and their removal by air flotation and nano-ferrofluid (i.e., magnetite and cobalt ferrite particle as a coagulant) and membrane processes were investigated as a proof-of-concept study. It is found that a two-blade mechanical impeller could fragment MPs from 75, 150 and 300 μm into mean size NPs/MPs of 0.74, 1.14 and 1.88 μm, respectively. Results showed that the maximum removal efficiency of polyethylene, polyvinyl chloride and polyester was 85, 82 and 69%, respectively, in the air flotation process. Increasing the dose of behentrimonium chloride surfactant from 2 to 10 mg/L improved the efficiency of the air flotation process for NPs/MPs removal. It is also found that the removal efficiency of NPs/MPs by the air flotation system depends on solution pH, size, and types of NPs/MPs. This study also found a less significant removal efficiency of NPs/MPs by both types of ferrofluid used in this study with an average removal of 43% for magnetite and 55% for cobalt ferrite. All three plastics tested had similar removal efficiency by the nano-ferrofluid particles, meaning that this removal technique does not rely on the plastic component type. Among all the process tested, both ultrafiltration and microfiltration membrane processes were highly effective, removing more than 90% of NPs/MPs fragment particles. Overall, this study has confirmed the effectiveness of using air flotation and the membrane process to remove NPs/MPs from wastewater.
    Matched MeSH terms: Environmental Monitoring
  18. Haris H, Aris AZ, Mokhtar MB
    Chemosphere, 2017 Jan;166:323-333.
    PMID: 27710880 DOI: 10.1016/j.chemosphere.2016.09.045
    Total mercury (THg) and methylmercury (MeHg) concentrations were determined from sediment samples collected from thirty sampling stations in Port Klang, Malaysia. Three stations had THg concentrations exceeding the threshold effect level of the Florida Department of Environmental Protection and the Canadian interim sediment quality guidelines. THg and MeHg concentrations were found to be concentrated in the Lumut Strait where inputs from the two most urbanized rivers in the state converged (i.e. Klang River and Langat River). This suggests that Hg in the study area likely originated from the catchments of these rivers. MeHg made up 0.06-94.96% of the sediment's THg. There is significant positive correlation (p 
    Matched MeSH terms: Environmental Monitoring/methods*
  19. Sharifinia M, Mahmoudifard A, Imanpour Namin J, Ramezanpour Z, Yap CK
    Chemosphere, 2016 Sep;159:584-594.
    PMID: 27343865 DOI: 10.1016/j.chemosphere.2016.06.064
    This study evaluates the impact of anthropogenic activities on the Shahrood River using water physico-chemical variables and macroinvertebrates data sets obtained over a period of 12 months between February 2012 and February 2013 at 8 sampling sites. Biotic indices i.e. FBI and BMWP based on macroinvertebrates and physico-chemical indices (MPI, HPI and NSF-WQI) were employed to evaluate the water quality status in connection with natural- and human-induced pressures. Based on physico-chemical indices, water quality was categorized as low polluted level and it is suitable for drinking purposes. The water quality based on biotic indices was related to the anthropic activities; a clear deterioration of the water quality was observed from upstream to downstream sites. The water quality along the river changed from very good (class I; reference sites) to good (class II; midstream sites) and turned into moderate (class III) and poor (class IV) quality (downstream sites). These findings indicate that biotic indices are more powerful indicators in assessing water quality than physico-chemical indices. Allocapnia, Glossosoma and Hesperoperla were exclusively related to least disturbed sites, and Naididae, Orthocladiinae and Ecdyonurus were found in sites showing notable degradation. Our results recommended that the use of macroinvertebrates could be employed as a cost-effective tool for biomonitoring and controlling of polluted riverine ecosystems in the Middle East. Finally, the results from this study may be useful not only for developing countries, but also for any organization struggling to use macroinvertebrate based indices with restricted financial resources and knowledge.
    Matched MeSH terms: Environmental Monitoring/methods
  20. Kato M, Azimi MD, Fayaz SH, Shah MD, Hoque MZ, Hamajima N, et al.
    Chemosphere, 2016 Dec;165:27-32.
    PMID: 27619645 DOI: 10.1016/j.chemosphere.2016.08.124
    Toxic elements in drinking water have great effects on human health. However, there is very limited information about toxic elements in drinking water in Afghanistan. In this study, levels of 10 elements (chromium, nickel, copper, arsenic, cadmium, antimony, barium, mercury, lead and uranium) in 227 well drinking water samples in Kabul, Afghanistan were examined for the first time. Chromium (in 0.9% of the 227 samples), arsenic (7.0%) and uranium (19.4%) exceeded the values in WHO health-based guidelines for drinking-water quality. Maximum chromium, arsenic and uranium levels in the water samples were 1.3-, 10.4- and 17.2-fold higher than the values in the guidelines, respectively. We next focused on uranium, which is the most seriously polluted element among the 10 elements. Mean ± SD (138.0 ± 1.4) of the (238)U/(235)U isotopic ratio in the water samples was in the range of previously reported ratios for natural source uranium. We then examined the effect of our originally developed magnesium (Mg)-iron (Fe)-based hydrotalcite-like compounds (MF-HT) on adsorption for uranium. All of the uranium-polluted well water samples from Kabul (mean ± SD = 190.4 ± 113.9 μg/L; n = 11) could be remediated up to 1.2 ± 1.7 μg/L by 1% weight of our MF-HT within 60 s at very low cost (<0.001 cents/day/family) in theory. Thus, we demonstrated not only elevated levels of some toxic elements including natural source uranium but also an effective depurative for uranium in well drinking water from Kabul. Since our depurative is effective for remediation of arsenic as shown in our previous studies, its practical use in Kabul may be encouraged.
    Matched MeSH terms: Environmental Monitoring
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links