MyMedR

Displaying publications 61 - 80 of 415 in total

Abstract:

Sort:

Enhancement of photocatalytic degradation of Malachite Green using iron doped titanium dioxide loaded on oil palm empty fruit bunch-derived activated carbon

Loo WW, Pang YL, Lim S, Wong KH, Lai CW, Abdullah AZ

Chemosphere, 2021 Jun;272:129588.
PMID: 33482519 DOI: 10.1016/j.chemosphere.2021.129588

Iron-doped titanium dioxide loaded on activated carbon (Fe-TiO2/AC) was successfully synthesized from oil palm empty fruit bunch (OPEFB) using sol-gel method. The properties of the synthesized pure TiO2, Fe-doped TiO2, AC, TiO2/AC and Fe-TiO2/AC were examined by various techniques such as field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) and nitrogen adsorption-desorption analyses at 77 K. FE-SEM revealed that Fe-doped TiO2 particles were dispersed homogeneously on the AC surface. FT-IR demonstrated high surface hydroxylation after Fe doping on TiO2 and UV-Vis DRS showed that Fe-TiO2/AC had the lowest band gap energy. Catalytic performance results proved that Fe dopants could restrict the recombination rate of hole and electron pairs, whereas AC support improved the Malachite Green (MG) adsorption sites and active sites of the hybrid catalyst. Photocatalytic degradation of 100 mg/L MG in the presence of 1.0 g/L 15 wt% Fe-TiO2 incorporated with 25 wt% AC, initial solution pH of 4 and 3 mM H2O2 could achieve the highest removal efficiency of 97% after 45 min light irradiation. This work demonstrates a promising approach to synthesis an inexpensive and efficient Fe-TiO2/AC for the photocatalytic degradation of organic dye.

Matched MeSH terms: Iron*
Fulltext Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Joseph J, Iftekhar S, Srivastava V, Fallah Z, Zare EN, Sillanpää M

Chemosphere, 2021 Dec;284:131171.
PMID: 34198064 DOI: 10.1016/j.chemosphere.2021.131171

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Matched MeSH terms: Iron
Uranium in well drinking water of Kabul, Afghanistan and its effective, low-cost depuration using Mg-Fe based hydrotalcite-like compounds

Kato M, Azimi MD, Fayaz SH, Shah MD, Hoque MZ, Hamajima N, et al.

Chemosphere, 2016 Dec;165:27-32.
PMID: 27619645 DOI: 10.1016/j.chemosphere.2016.08.124

Toxic elements in drinking water have great effects on human health. However, there is very limited information about toxic elements in drinking water in Afghanistan. In this study, levels of 10 elements (chromium, nickel, copper, arsenic, cadmium, antimony, barium, mercury, lead and uranium) in 227 well drinking water samples in Kabul, Afghanistan were examined for the first time. Chromium (in 0.9% of the 227 samples), arsenic (7.0%) and uranium (19.4%) exceeded the values in WHO health-based guidelines for drinking-water quality. Maximum chromium, arsenic and uranium levels in the water samples were 1.3-, 10.4- and 17.2-fold higher than the values in the guidelines, respectively. We next focused on uranium, which is the most seriously polluted element among the 10 elements. Mean ± SD (138.0 ± 1.4) of the (238)U/(235)U isotopic ratio in the water samples was in the range of previously reported ratios for natural source uranium. We then examined the effect of our originally developed magnesium (Mg)-iron (Fe)-based hydrotalcite-like compounds (MF-HT) on adsorption for uranium. All of the uranium-polluted well water samples from Kabul (mean ± SD = 190.4 ± 113.9 μg/L; n = 11) could be remediated up to 1.2 ± 1.7 μg/L by 1% weight of our MF-HT within 60 s at very low cost (<0.001 cents/day/family) in theory. Thus, we demonstrated not only elevated levels of some toxic elements including natural source uranium but also an effective depurative for uranium in well drinking water from Kabul. Since our depurative is effective for remediation of arsenic as shown in our previous studies, its practical use in Kabul may be encouraged.

Matched MeSH terms: Environmental Monitoring; Iron/pharmacology; Iron/chemistry*; Environmental Restoration and Remediation/economics; Environmental Restoration and Remediation/methods*
Hydroxyl radical formation in the hybrid system of photocatalytic fuel cell and peroxi-coagulation process affected by iron plate and UV light

Nordin N, Ho LN, Ong SA, Ibrahim AH, Abdul Rani AL, Lee SL, et al.

Chemosphere, 2020 Apr;244:125459.
PMID: 31790991 DOI: 10.1016/j.chemosphere.2019.125459

The hybrid electrochemical system of photocatalytic fuel cell - peroxi-coagulation (PFC-PC) is a combined technology of advanced oxidation process (AOP) which involve the hydroxyl radical formation for simultaneous degradation of organic pollutant and electricity generation. The p-nitrosodimethylaniline (RNO) spin trapping technique was applied by analyzing the RNO bleaching performance to detect the OH at the PFC and PC reactors. The presence of UV light showed higher RNO bleaching rate at the PFC reactor (11.7%) with maximum power density (Pmax = 3.14 mW cm-2). Results revealed that the optimum of maximum power density was observed at iron plate size of 30 cm2. UV light became a limiting factor in the PFC system as a power source in the PFC-PC system. Meanwhile, iron plate plays an important role to supply the soluble Fe2+ ions by oxidation process and become a suitable catalyst for in-situ production of H2O2 and OH through the PC process to degrade the organic molecules.

Matched MeSH terms: Iron/chemistry
Removal of organochlorine pesticides using zerovalent iron supported on biochar nanocomposite from Nephelium lappaceum (Rambutan) fruit peel waste

Batool S, Shah AA, Abu Bakar AF, Maah MJ, Abu Bakar NK

Chemosphere, 2022 Feb;289:133011.
PMID: 34863732 DOI: 10.1016/j.chemosphere.2021.133011

Unique zerovalent iron (Fe0) supported on biochar nanocomposite (Fe0-BRtP) was synthesized from Nephelium lappaceum (Rambutan) fruit peel waste and were applied for the simultaneous removal of 6 selected organochlorine pesticides (OCPs) from aqueous medium. During facile synthesis of Fe0-BRtP, Rambutan peel extract was used as the green reducing mediator to reduce Fe2+ to zerovalent iron (Fe0), instead of toxic sodium borohydride which were used for chemical synthesis. For comparison, chemically synthesized Fe0-BChe nanocomposite was also prepared in this work. Characterization study confirmed the successful synthesis and dispersion of Fe0 nanoparticles on biochar surface. Batch experiments revealed that Fe0-BRtP and Fe0-BChe nanocomposites combine the advantage of adsorption and dechlorination of OCPs in aqueous medium and up to 96-99% and 83-91% removal was obtained within 120 and 150 min, respectively at initial pH 4. Nevertheless, the reactivity of Fe0-BChe nanocomposite decreased 2 folds after being aged in air for one month, whilst Fe0-BRtP almost remained the same. Adsorption isotherm of OCPs were fitted well to Langmuir isotherm and then to Freundlich isotherm. The experimental kinetic data were fitted first to pseudo-second-order adsorption kinetic model and then to pseudo-first-order reduction kinetic model. The adsorption mechanism involves π-π electron-donor-acceptor interaction and adsorption is facilitated by the hydrophobic sorption and pore filling. After being reused five times, the removal efficiency of regenerated Fe0-BChe and Fe0-BRtP was 5-13% and 89-92%, respectively. The application of this Fe0-BRtP nanocomposite could represent a green and low-cost potential material for adsorption and subsequent reduction of OCPs in aquatic system.

Matched MeSH terms: Iron
The use of inorganic ferrous-ferric oxide nanoparticles to improve fresh and durability properties of foamed concrete

Mydin MAO, Nawi MNM, Omar R, Khadimallah MA, Ali IM, Deraman R

Chemosphere, 2023 Mar;317:137661.
PMID: 36608888 DOI: 10.1016/j.chemosphere.2022.137661

Efforts to modify cement-based mixtures have continuously engrossed the interest of academics. Favourable impacts of nanoparticles, for instance, fine particle size and great reactivity, have made them be utilized in concrete. Foamed concrete (FC) is immensely porous, and its properties diminish with an increase in the number of pores. To enhance its properties, the FC matrix could be attuned by integrating numerous nanoparticles. The influence of ferrous-ferric oxide nanoparticles (FFO-NP) in FC was not discovered previously in the present body of knowledge. Thus, there is some uncertainty contemplating the mechanism to which extent the FFO-NP can affect the durability properties of FC. Hence, this study focuses on utilizing FFO-NP in the FC matrix. FC specimens with a density of 1000 kg/m3 were cast and tested. The objective was to assess the influence of different FFO-NP weight fractions (0.10%, 0.15%, 0.20%, 0.25%, 0.30%, and 0.35%) on durability properties such as drying shrinkage, porosity, water absorption and ultrasonic wave propagation velocity of FC. The results implied that the presence of a 0.25% weight fraction of FFO-NP in FC facilitates optimal water absorption, porosity, ultrasonic pulse velocity and drying shrinkage of FC. The presence of FFO-NP alters the microstructural of FC from loose needle-like into a dense cohesive microstructure of the cementitious composite. Besides, FFO-NP augments the FC matrix by filling the voids, microcracks, and spaces within the structure. Further than the ideal weight fraction of FFO-NP addition, the accretion of the FFO-NP was found, which caused a decline in durability properties.

Matched MeSH terms: Iron*
Iron deficiency in the tropics

Fleming AF

Clin Haematol, 1982 Jun;11(2):365-88.
PMID: 7042157
Matched MeSH terms: Iron/blood; Iron/therapeutic use
Structure and function of the vacuolar Ccc1/VIT1 family of iron transporters and its regulation in fungi

Sorribes-Dauden R, Peris D, Martínez-Pastor MT, Puig S

Comput Struct Biotechnol J, 2020;18:3712-3722.
PMID: 33304466 DOI: 10.1016/j.csbj.2020.10.044

Iron is an essential micronutrient for most living beings since it participates as a redox active cofactor in many biological processes including cellular respiration, lipid biosynthesis, DNA replication and repair, and ribosome biogenesis and recycling. However, when present in excess, iron can participate in Fenton reactions and generate reactive oxygen species that damage cells at the level of proteins, lipids and nucleic acids. Organisms have developed different molecular strategies to protect themselves against the harmful effects of high concentrations of iron. In the case of fungi and plants, detoxification mainly occurs by importing cytosolic iron into the vacuole through the Ccc1/VIT1 iron transporter. New sequenced genomes and bioinformatic tools are facilitating the functional characterization, evolution and ecological relevance of metabolic pathways and homeostatic networks across the Tree of Life. Sequence analysis shows that Ccc1/VIT1 homologs are widely distributed among organisms with the exception of animals. The recent elucidation of the crystal structure of a Ccc1/VIT1 plant ortholog has enabled the identification of both conserved and species-specific motifs required for its metal transport mechanism. Moreover, recent studies in the yeast Saccharomyces cerevisiae have also revealed that multiple transcription factors including Yap5 and Msn2/Msn4 contribute to the expression of CCC1 in high-iron conditions. Interestingly, Malaysian S. cerevisiae strains express a partially functional Ccc1 protein that renders them sensitive to iron. Different regulatory mechanisms have been described for non-Saccharomycetaceae Ccc1 homologs. The characterization of Ccc1/VIT1 proteins is of high interest in the development of biofortified crops and the protection against microbial-derived diseases.

Matched MeSH terms: Iron; Iron Metabolism Disorders
A longitudinal study of serum iron indices and haemoglobin concentration following copper-IUD insertion

Goh TH, Hariharan M, Tan CH

Contraception, 1980 Oct;22(4):389-95.
PMID: 7449387

The increase in menstrual blood loss associated with copper-bearing IUDs may cause or aggravate pre-existing anaemia. In order to evaluate this risk, 84 Malaysian women wearing copper-IUDs were studied longitudinally by means of serial measurements of blood haemoglobin concentration (Hb), serum iron (S/Fe) and transferrin saturation (T/S). The initial Hb was under 12 gm% in 33.7% of patients. The mean Hb showed no significant change up to 12 months while S/Fe fell significantly at the end of this time; the T/S was significantly reduced as early as 6 months post-insertion. There is a significant risk of anaemia following copper-IUD insertion, particularly with long-term usage. Progestogen-releasing IUDs may offer the most feasible solution to this problem in our local context since oral medication with iron or drugs to reduce menstrual blood loss is not practicable.

Matched MeSH terms: Iron/blood*
A Glance on the Role of Bacterial Siderophore from the Perspectives of Medical and Biotechnological Approaches

AlMatar M, Albarri O, Makky EA, Var I, Köksal F

Curr Drug Targets, 2020;21(13):1326-1343.
PMID: 32564749 DOI: 10.2174/1389450121666200621193018

Iron, which is described as the most basic component found in nature, is hard to be assimilated by microorganisms. It has become increasingly complicated to obtain iron from nature as iron (II) in the presence of oxygen oxidized to press (III) oxide and hydroxide, becoming unsolvable at neutral pH. Microorganisms appeared to produce organic molecules known as siderophores in order to overcome this condition. Siderophore's essential function is to connect with iron (II) and make it dissolvable and enable cell absorption. These siderophores, apart from iron particles, have the ability to chelate various other metal particles that have collocated away to focus the use of siderophores on wound care items. There is a severe clash between the host and the bacterial pathogens during infection. By producing siderophores, small ferric iron-binding molecules, microorganisms obtain iron. In response, host immune cells produce lipocalin 2 to prevent bacterial reuptake of siderophores loaded with iron. Some bacteria are thought to produce lipocalin 2-resistant siderophores to counter this risk. The aim of this article is to discuss the recently described roles and applications of bacterial siderophore.

Matched MeSH terms: Iron/metabolism
Hyperferritinaemia: An Iron Sword of Autoimmunity

Giemza-Stokłosa J, Islam MA, Kotyla PJ

Curr Pharm Des, 2019;25(27):2909-2918.
PMID: 31686632 DOI: 10.2174/1381612825666190709202804

BACKGROUND: Ferritin is a molecule that plays many roles being the storage for iron, signalling molecule, and modulator of the immune response.
METHODS: Different electronic databases were searched in a non-systematic way to find out the literature of interest.
RESULTS: The level of ferritin rises in many inflammatory conditions including autoimmune disorders. However, in four inflammatory diseases (i.e., adult-onset Still's diseases, macrophage activation syndrome, catastrophic antiphospholipid syndrome, and sepsis), high levels of ferritin are observed suggesting it as a remarkable biomarker and pathological involvement in these diseases. Acting as an acute phase reactant, ferritin is also involved in the cytokine-associated modulator of the immune response as well as a regulator of cytokine synthesis and release which are responsible for the inflammatory storm.
CONCLUSION: This review article presents updated information on the role of ferritin in inflammatory and autoimmune diseases with an emphasis on hyperferritinaemic syndrome.

Matched MeSH terms: Iron/blood*; Iron Metabolism Disorders/blood*
Fulltext Differentiation of ripe and unripe fruit flour using mineral composition data-Statistical assessment

Alkarkhi AFM, Alqaraghuli WAA, Mohamed Zam NR, Manan DMA, Mahmud MN, Huda N

Data Brief, 2020 Jun;30:105414.
PMID: 32258278 DOI: 10.1016/j.dib.2020.105414

Data on the mineral composition and content of one heavy metal measured in three different fruit flours prepared from ripe and unripe fruits (pulp and peel) are presented. The mineral composition (sodium (Na), potassium (K), magnesium (Mg), calcium (Ca), zinc (Zn), copper (Cu), iron (Fe) and manganese (Mn)) and content of one heavy metal (lead (Pb)) of the flours were analyzed by atomic absorption spectrophotometry. The analysis showed that the data can be used for differentiation between different fruits and stages of ripeness, as revealed by discriminant analysis and cluster analysis. The data provided can be used by researchers and scientists in the differentiation of fruits based on major and minor mineral elements.

Matched MeSH terms: Iron
Repeat endoscopy for recurrent iron deficiency anemia: an (un)expected finding from southeast Asia

Mahadeva S, Qua CS, Yusoff W, Sulaiman W

Dig Dis Sci, 2007 Feb;52(2):523-5.
PMID: 17219070
Matched MeSH terms: Anemia, Iron-Deficiency/parasitology*
Fulltext First reported case of Haemoglobin-M Hyde Park in a Malay family living in Malaysia

Loong TY, Chong DL, Jamal AR, Murad NA, Sabudin RZ, Fun LC

EXCLI J, 2016;15:630-635.
PMID: 28096792 DOI: 10.17179/excli2016-613

Haemoglobin (Hb)-M Hyde Park, also known as Hb-M Akita is a rare type of hereditary Hb M due to autosomal dominant mutation of CAC>TAC on codon 92 of β globin gene resulting in the replacement of histidine by tyrosine on β globin chain. This variant Hb has a tendency to form methaemoglobin (metHb). The iron ion in metHb is oxidized to ferric (Fe3+) which is unable to carry oxygen and the patients manifest as cyanosis clinically. A 9-year-old Malay girl was incidentally found to be cyanotic when she presented to a health clinic. Laboratory investigations revealed raised methaemoglobin levels and Hb analysis findings were consistent with Hb-M Hyde Park. β gene sequencing confirmed a point mutation of CAC>TAC on codon 92 in one of the β genes. The family study done on the individuals with cyanosis showed similar findings. A diagnosis of heterozygous Hb-M Hyde Park was made. Patients with this variant Hb usually presented with cyanosis with mild haemolysis and maybe misdiagnosed as congenital heart disease. No further treatment is needed as patients are relatively asymptomatic. Although the disease is harmless in the heterozygous carriers but the offspring of the carriers may suffer severe haemolytic anaemia when the offspring also inherit other β haemoglobinopathies/thalassemia. This can happen due to high prevalence of β thalassemia carrier (3.5-4 %) found in Malaysia. At the time of writing, this is the first case of hereditary Hb-M Hyde Park diagnosed in a Malay family living in Malaysia.

Matched MeSH terms: Iron
Fulltext Effects of iron supplementation and nutrition education on haemoglobin, ferritin and oxidative stress in iron-deficient female adolescents in Palestine: randomized control trial

Jalambo M, Karim N, Naser I, Sharif R

East Mediterr Health J, 2018 Jul 29;24(6):560-568.
PMID: 30079951 DOI: 10.26719/2018.24.6.560

Background: Iron deficiency and iron-deficiency anaemia are associated with oxidative stress, but their role is largely unclear. Information is scarce on the effects of iron supplementation on biomarkers of oxidative stress in humans.
Aims: This study evaluated the effectiveness of iron supplementation and nutrition education on improving the levels of haemoglobin and ferritin, and decreasing oxidative stress among iron-deficient female adolescents in Gaza, Palestine.
Methods: A total 131 iron-deficient female adolescents were recruited and allocated randomly into 3 different groups. The iron supplementation group (A) received 200 mg of ferrous fumarate weekly during the 3-month intervention, the iron supplementation with nutrition education group (B) received iron supplements with nutrition education sessions, and the control group (C) did not receive any intervention. The levels of haemoglobin, ferritin and malonyl dialdehyde were measured at baseline, after 3 months (at which point the intervention was stopped), and then 3 months later. Trial registration number: ACTRN12618000960257.
Results: Haemoglobin levels increased significantly after supplementation in both groups A and B. At the follow-up stage (3 months after stopping the intervention), iron and haemoglobin levels in group B continued to increase and malonyl dialdehyde decreased. In Group A, haemoglobin, ferritin and malonyl dialdehyde levels decreased after 3 months of stopping the intervention. No changes were seen in Group C.
Conclusions: A nutrition programme should be adopted and integrated into comprehensive intervention programmes to target iron-deficiency anaemia among female adolescents in Palestine.

Matched MeSH terms: Iron/administration & dosage*; Iron/deficiency; Iron/therapeutic use
Fulltext Accumulation and risk assessment of heavy metals employing species sensitivity distributions in Linggi River, Negeri Sembilan, Malaysia

Razak MR, Aris AZ, Zakaria NAC, Wee SY, Ismail NAH

Ecotoxicol Environ Saf, 2021 Mar 15;211:111905.
PMID: 33453636 DOI: 10.1016/j.ecoenv.2021.111905

The constant increase of heavy metals into the aqueous environment has become a contemporary global issue of concern to government authorities and the public. The study assesses the concentration, distribution, and risk assessment of heavy metals in freshwater from the Linggi River, Negeri Sembilan, Malaysia. Species sensitivity distribution (SSD) was utilised to calculate the cumulative probability distribution of toxicity from heavy metals. The aquatic organism's toxicity data obtained from the ECOTOXicology knowledgebase (ECOTOX) was used to estimate the predictive non-effects concentration (PNEC). The decreasing sequence of hazardous concentration (HC5) was manganese > aluminium > copper > lead > arsenic > cadmium > nickel > zinc > selenium, respectively. The highest heavy metal concentration was iron with a mean value of 45.77 μg L-1, followed by manganese (14.41 μg L-1) and aluminium (11.72 μg L-1). The mean heavy metal pollution index (HPI) value in this study is 11.52, implying low-level heavy metal pollutions in Linggi River. The risk quotient (RQ) approaches were applied to assess the potential risk of heavy metals. The RQ shows a medium risk of aluminium (RQm = 0.1125) and zinc (RQm = 0.1262); a low risk of arsenic (RQm = 0.0122) and manganese (RQm = 0.0687); and a negligible risk of cadmium (RQm = 0.0085), copper (RQm = 0.0054), nickel (RQm = 0.0054), lead (RQm = 0.0016) and selenium (RQm = 0.0012). The output of this study produces comprehensive pollution risk, thus provides insights for the legislators regarding exposure management and mitigation.

Matched MeSH terms: Environmental Monitoring; Iron
Mineralogical and chemical characterization of mining waste and utilization for carbon sequestration through mineral carbonation

Molahid VLM, Kusin FM, Syed Hasan SNM

Environ Geochem Health, 2023 Jul;45(7):4439-4460.
PMID: 36811700 DOI: 10.1007/s10653-023-01513-y

Mining activities have often been associated with the issues of waste generation, while mining is considered a carbon-intensive industry that contributes to the increasing carbon dioxide emission to the atmosphere. This study attempts to evaluate the potential of reusing mining waste as feedstock material for carbon dioxide sequestration through mineral carbonation. Characterization of mining waste was performed for limestone, gold and iron mine waste, which includes physical, mineralogical, chemical and morphological analyses that determine its potential for carbon sequestration. The samples were characterized as having alkaline pH (7.1-8.3) and contain fine particles, which are important to facilitate precipitation of divalent cations. High amount of cations (CaO, MgO and Fe2O3) was found in limestone and iron mine waste, i.e., total of 79.55% and 71.31%, respectively, that are essential for carbonation process. Potential Ca/Mg/Fe silicates, oxides and carbonates have been identified, which was confirmed by the microstructure analysis. The limestone waste composed majorly of CaO (75.83%), which was mainly originated from calcite and akermanite minerals. The iron mine waste consisted of Fe2O3 (56.60%), mainly from magnetite and hematite, and CaO (10.74%) which was derived from anorthite, wollastonite and diopside. The gold mine waste was attributed to a lower cation content (total of 7.71%), associated mainly with mineral illite and chlorite-serpentine. The average capacity for carbon sequestration was between 7.73 and79.55%, which corresponds to 383.41 g, 94.85 g and 4.72 g CO2 that were potentially sequestered per kg of limestone, iron and gold mine waste, respectively. Therefore, it has been learned that the mine waste might be utilized as feedstock for mineral carbonation due to the availability of reactive silicate/oxide/carbonate minerals. Utilization of mine waste would be beneficial in light of waste restoration in most mining sites while tackling the issues of CO2 emission in mitigating the global climate change.

Matched MeSH terms: Iron
Comparison of unmodified and modified BCR sequential extraction schemes for the fractionation of heavy metals in shrimp aquaculture sludge from Selangor, Malaysia

Nemati K, Abu Bakar NK, Abas MR, Sobhanzadeh E, Low KH

Environ Monit Assess, 2011 May;176(1-4):313-20.
PMID: 20632089 DOI: 10.1007/s10661-010-1584-3

A study was carried out to investigate the fractionation of Cd, Cr, Cu, Fe, Mn, Pb, and Zn in shrimp aquaculture sludge from Selangor, Malaysia, using original (unmodified) and modified four-steps BCR (European Community Bureau of Reference, now known as the Standards Measurements and Testing Program) sequential extraction scheme. Step 2 of the unmodified BCR procedure (subsequently called Method A) involves treatment with 0.1 M hydroxylammonium chloride at pH 2, whereas 0.5 M hydroxylammonium chloride at pH 1.5 was used in the modified BCR procedure (subsequently called Method B). Metal analyses were carried out by flame atomic absorption spectrometry. A pseudo-total aqua-regia digest of BCR CRM 701 has also been undertaken for quality assurance purposes. The recovery of Method A for all metals studied ranges from 96.14% to 105.26%, while the recovery for Method B ranges from 95.94% to 122.40%. Our results reveal that Method A underestimated the proportion of metals bound to the easily reducible fraction except for copper. Therefore, the potential mobility of these elements is higher than others. Thus, to use this sludge as a fertilizer we have to first find a remediation for reduction of heavy metal contamination.

Matched MeSH terms: Environmental Monitoring; Iron/isolation & purification; Iron/chemistry
Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia--a statistical assessment

Alkarkhi AF, Ismail N, Ahmed A, Easa Am

Environ Monit Assess, 2009 Jun;153(1-4):179-85.
PMID: 18504644 DOI: 10.1007/s10661-008-0347-x

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.

Matched MeSH terms: Environmental Pollutants/analysis*; Iron/analysis
Trend in metals variation in Tasik Chini, Pahang, Peninsular Malaysia

Shuhaimi-Othman M, Mushrifah I, Lim EC, Ahmad A

Environ Monit Assess, 2008 Aug;143(1-3):345-54.
PMID: 17987397

Water from 15 sampling stations in Tasik Chini (Chini Lake), Peninsular Malaysia were sampled for 12 months from September 2004 until August 2005 and analyzed for 11 metals including iron (Fe), aluminum (Al), manganese (Mn), barium (Ba), zinc (Zn), lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), chromium (Cr) and cobalt (Co). Results showed that the mean (min-max) metal concentrations (in micrograms per liter) in Tasik Chini waters for the 12 months sampling based on 15 sampling stations (in descending order) for Fe, Al, Mn, Ba, Zn, Pb, Cu and Cd were 794.84 (309.33-1609.07), 194.53 (62.37-665.93), 29.16 (16.68-79.85), 22.07 (15.64-29.71), 5.12 (2.224-6.553), 2.36 (1.165-4.240), 0.832 (0.362-1.443) and 0.421 (0.254-0.696) respectively. Concentration for three metals i.e. Ni, Cr and Co were too low and not detected by the graphite furnace Atomic Absorption Spectrophotometry (AAS). Comparison with various water quality standards showed that the mean metals concentration in surface water of Tasik Chini were low and within the range of natural background except for Fe and Al. In general, metal concentrations in Tasik Chini water varied temporally and spatially. The main factors influencing these metal concentrations in the water were the raining season and mining activities. Stations located at Tanjung Jerangking and Melai areas were the most effected due to those factors.

Matched MeSH terms: Environmental Monitoring/methods; Iron/analysis

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links